Thinkpad 600 - The good and the bad and the ugly
by Michael A. Peters
I don't know how long the USPS has been offering "click-n-ship" via
java, but they do - and it works in Linux - so I no longer have any need
to have windows (which I was using for PayPal shipping labels)
So I did an http install of rawhide on my IBM Thinkpad 600.
This is a 700 MHz PIII with 256 MB of ram (unfortunately in two 128
chips - so to max it out, I need to buy two new chips :( )
boot.iso, graphical install using my local rawhide mirror, it went
flawlessly. The fonts looked a little weird, but I actually expected
that. The "time remaining" is whacked, imho it should be removed - it
never has been accurate on any machine I have ever installed on.
I was impressed - since it was docked, my USB keyboard and mouse (Apple
Pro keyboard - best USB keyboard I've ever owned) were completely usable
during the install, they weren't for the initial boot prompt, but that's
expected. A certain other operating system does not make them available
until after I have logged in once and it detects the new hardware (and
then it works for login).
First boot went flawlessly, this seems to have been the least
troublesome test install I have done so far.
-=-
Post install - it didn't know what my monitor was.
So 800x600 is the best I could get. A thinkpad 600 isn't exactly
bleeding edge hardware. I was able to reconfigure it manually choosing
generic lcd 1024x, and that seems to work.
I could not find a way to shut down the box w/o opening a terminal
window. There is no shutdown option from menu or gdm.
virtual consoles are completely broken - I believe I've seen that
reported already though. I will check to see if there is a bug open for
my chipset (I think there is).
Playing test sound failed, but that I'm filing under the category of I
personally don't really give a damn.
19 years, 1 month
missing dependency struts11
by Genes MailLists
This has been unresolved for a few days.
Yum update shows:
yum update
Setting up Update Process
Setting up repositories
development 100% |=========================| 1.1 kB 00:00
extras-development 100% |=========================| 951 B 00:00
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package struts11-manual.noarch 0:1.1-1jpp_4fc set to be updated
---> Package struts11.noarch 0:1.1-1jpp_4fc set to be updated
---> Package struts11-javadoc.noarch 0:1.1-1jpp_4fc set to be updated
--> Running transaction check
--> Processing Dependency: struts11 = 1.1-1jpp_2fc for package: struts11-webapps-tomcat5
--> Finished Dependency Resolution
Error: Missing Dependency: struts11 = 1.1-1jpp_2fc is needed by package struts11-webapps-tomcat5
regards,
g/
19 years, 1 month
kdm login greeter stopped working
by Genes MailLists
FC4t2 - fullly yum updated.
Was working fine till yesterday - today
the kdm greeter stopped workign - instead now get gnome greeter (gdm).
Things that may be contributory:
a) Did a full update last night - which had missing lib errors
hand updated all the parts I could including x11-xorg,
and kernel to 1240.
b) Did a yum update this morning and it completed with no trouble
c) Right after, with some hope I tried once again
the cox 3-D test (bzflag 2.0) - which
promptly crashed the machine ;-( (radeon 9200).
Used Alt-sysctl-b to reboot hung state.
Tried running kcontrol and setting defaults for login -
did not help - it did refresh /usr/share/config/kdm/kdmrc.
# cat /etc/sysconfig/desktop
DESKTOP="KDE"
DISPLAYMANAGER="KDE"
Some relevant bits from /var/log/messages:
Apr 16 13:47:02 flash kdm_config[7228]: Unrecognized key 'Xservers' in section [General] at /usr/share/config/kdm/kdmrc:3
Apr 16 13:47:02 flash kdm_config[7228]: Unrecognized key 'UseLilo' in section [Shutdown] at /usr/share/config/kdm/kdmrc:8
Apr 16 13:47:02 flash kdm_config[7228]: Unrecognized key 'SessionTypes' in section [X-*-Greeter] at /usr/share/config/kdm/kdmrc:41
Apr 16 13:47:02 flash kdm_config[7228]: Unrecognized key 'Themes' in section [X-*-Greeter] at /usr/share/config/kdm/kdmrc:46
..
Apr 16 13:47:06 flash kdm_greet[7247]: Can't open default user face
Any advice?
g/
19 years, 1 month
FC4T2 Bad news - kernel 1275 smp does not work.
by Genes MailLists
I am no longer able to boot using kernel 1275 smp.
non-smp works fine as do prev kernels both smp and non-smp.
1268 smp was fine for example.
1275 smp gets up to the point where it sees the disks and
says something like
Mounting root filesystem
and then hangs.
Machine is 1 GiB mem, HT 3.6 GHz with SATA disk (intel ICH6R/ICH6RW)
- dell precision 370 (intel based).
I do not have nvidia driver installed - no tainting involved.
Fully updated save for struts11 which is a missing dependency for
a week or so now.
Please let me know anything I can provide to help.
Following is /proc/cpuinfo and lspci -vv.
g/
------------------------------------------------------------
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.60GHz
stepping : 1
cpu MHz : 3591.578
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni monitor ds_cpl tm2 cid cx16 xtpr
bogomips : 7127.04
(similar for processeor : 1)
------------------------------------------------------------
# lspci -vv
00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev 04)
Subsystem: Dell: Unknown device 0175
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dd000000-dfefffff
Prefetchable memory behind bridge: c0000000-cfffffff
Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 7680, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
Capabilities: [140] Unknown (5)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dcf00000-dcffffff
Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: dce00000-dcefffff
Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 3, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at ff80 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at ff60 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at ff40 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at ff20 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 0175
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at ec00 [size=256]
Region 1: I/O ports at e8c0 [size=64]
Region 2: Memory at dffffa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dffff900 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 Class 0106: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) (prog-if 01)
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Region 5: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: Dell: Unknown device 0175
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at e8a0 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330] (rev a2) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 0215
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at dfe00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
Link: Latency L0s <2us, L1 <16us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
Subsystem: Dell: Unknown device 0175
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dcff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 654190dbd30deab8 Data: d1c0
Capabilities: [d0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
19 years, 1 month
Anyone else seeing hal problems with selinux-targetted?
by Jef Spaleta
I have a fully synced rawhide box.
hal-0.5.1-1
selinux-policy-targeted-1.23.13-4
with selinux set to enforcing mode hal doesn't seem to be operating
correctly and I am getting
this avc message at bootup.
kernel: audit(1114815383.993:0): avc: denied { connectto } for
path=@ /tmp/hald-local/dbus-gcCZNOvxOB
scontext=system_u:system_r:hald_t tcontext=system_u:system_r:hald_t
tclass=unix_stream_socket
I have run the fixfiles relabel command but I am still getting the avc
generated at hal service start up. Anyeone else seeing something
similar? Once I reboot with selinux in permissive mode, hal operates
as i expect. My selinux-fu is still poor, so any pointers on how to
diagnose this more would be appreciated.
-jef
19 years, 1 month
Re: Re: Multiple boot errors
by William
From: fedora-test-list-bounces(a)redhat.com
[mailto:fedora-test-list->bounces(a)redhat.com] On Behalf Of William
>>Sent: Wednesday, April 27, 2005 11:35 AM
>>To: fedora-test-list(a)redhat.com
>>Subject: Multiple boot errors
>>
>>After the update yesterday around 3pm, I can not log into Linux. Here is the situation.
>>1) During bootup it loads audit
>>2) While loading volumes it gives the error message "/sbin/undevstart
>>exited >abnormally (PID 386)" and "/sbin/undevstart exited abnormally (PID
>401)"
>>3) Then it gives me two screen full of similar error messages:
>>"audit (1114593678.830) avc : denied forname=XXX dev=proc ino=XXX
>>scontext"
>>4) When it gets to loading eth0, it gives this error message:
>>"cannot remove /etc/resolv.conf predhclient permission denied" followed by
>>clvmd >failed
>>5) When it gets to the login screen it says default them is not available
>>and uses >the one with the flower
>>6) Login box has three dots in it and will not focus. I can not type
>>anything into >the login box.
>>I am running a Dell Inspiron 1150 with a Pentium 4 Celeron 2.6ghz, 512mb
>>ram, and >Intel 852 graphics with a BroadCom 440x 10/100 Network
>Controller. I have tried all >previous Kernels with same results.
>
>
>>
>>
>>
>>Jerim
>
>
>>I have found similar results see my e-mail Kernel or Grub.
>> You have a couple of thing going on though:
>>1. Your audit ... avc messages are coming from SELinux and wrong permissions
>>on files. You will probably just need to run "fixfiles relabel" to
>>straighten everything out at once.
>>2. etc/resolv.conf is where your DNS servers are listed and probably handed
>>out by DHCP unless you set up your DNS as static. If it is DHCP then again
>>it is a permissions issue but not with SELinux.
>>3. clvmd is a separate service that is not starting up, and will not affect
>>the system
>>4. The problem with the login screen is someone decided to remove the
>>"Default" so you need to start your machine with init 3 and change this to
>>"Blue Curve" or some other.
>>Thanx,
>>Don
Following your suggestions, I used "fixfiles relabel" to fix most of the problems. I didn't understand where to use init3 so I created the directory it was looking for(usr/share/gdm/themes/Default) and copied one of the themes over into it. It has been working perfectly ever since. Thanks for the help.
William
19 years, 1 month
Latest rawhide updates seem to have removed the shutdown option at gdm and gnome logout
by Jef Spaleta
As the subject says, applying the latest updates i seem to have lost
the ability to select shutdown from gdm login screen and gnome logout
dialog. The reboot option remains.
A few questions:
Anyone else see this change in default behavior for locally logged in users?
How do I re-enable the shutdown option again in gdm and gnome dialog?
Is this a bug or a delibrate change in behavior?
-jef"why don't they make Biore back strips?"spaleta
19 years, 1 month
FC3 packages left over after upgrade to FC4
by Anne & Lynn Wheeler
i've been having all sorts of sporadic problems where yum won't install
new updates ... because of supposed dependencies. I wondered if that has
contributed to my problem with ACPI all of a sudden generating tens of
megabytes of syslog entries about my laptop screen.
A "yum list" of all installed packages turned up about 100 packages that
appear to be left over from FC3 ... and hadn't been deleted in the FC4
upgrade (there were 100 packages that had both an earlier version and a
later version). Manually going thru all 100 and deleting the earlier
version seems to have eliminated various YUM error messages about not
being able to apply various packages (because of conflicting
dependencies) ... but that still hasn't stopped the ACPI syslog message
flood on my laptop machine.
19 years, 1 month
