Fedora 22 WS live i686 fails
by Patrick Dupre
Hello,
I tried to start Fedora 22 WS live i686 (from a DVD that I burned) on 2 different machines
and it failed with the message:
Could not boot
/dev/disk/by-label/Fedora-Live-WS-i686-22-3 does not exist
/dev/mapper/live-rw does not exit
I burned 2 DVDs with the same issue!
Thank for your help.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 10 months
initial-setup-graphical.service
by Patrick Dupre
Hello,
In the manual (Installation Guide for fedora 22, 6.1), it says:
You can make it display again (after the next reboot, before a login prompt is displayed), by
executing the following command as
root
systemctl enable initial-setup-graphical.service
But the response is:
Fails to execute the operation: No such file or directory
How could I rerun the Initial Setup?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 10 months
Thunderbird is loading up my AdressBook
by Mickey
Fedora 21/ KDE Fedup from F20
Thunderbird is loading up Email Addreses in my AddressBook that I'm not
doing myself.
I'm get double entries of Email addresses I have entered.
Fedup 20-21 has Screwed up a number of things in the F21 update that I
did not have in F20. I guess I'm going to have to do a Fresh install of
F22 to get rid of these problems.
8 years, 10 months
graphic issue in fedora 22
by Patrick Dupre
Hello,
I deleted the dir /etc/X11/
with a new user, I start startx
It takes a while and I get
Oh no Soemthing has gone wrong
A problem has occurred and the system can't recover
Then I get a screen about the language
and then asking about the keyboard (no mouse available)
and then it ends.
I can read:
Loading extension GLX
waiting for X server too shutdown (EE) Server
closing log file the X serverxinit: connection to X Server lostType "ONE_LEVEL" has 1 levels, but
What to do?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 10 months
Blinking wifi light - Intel Pro Dell Wireless WIFI 3945 card in Dell D630 Laptop
by Max Pyziur
Greetings,
I swapped out a stock Broadcom wifi card for an Intel 3945 card and now my
Wifi indicator light blinks continually. I tried some of the
recommendations that I've found (create an /etc/modprobe.d/iwlwifi.conf
file with the line:
options iwlwifi led_mode=1
Subsequent rebooting does nothing to eliminate the annoyance.
The reason that I swapped out the Broadcom card is because it would stop
functioning after a certain irregular period of time, and
"systemctl restart NetworkManager" would not restart it (resorting to
plugging in the ethernet cable, or rebooting).
Any suggestions would be greatly appreciated (either how to keep the
Broadcom card from dying, or getting rid of the Intel card causing the
wifi light to blink).
Thank you.
Max Pyziur
pyz(a)brama.com
8 years, 10 months
Graphics with fedora 22
by Patrick Dupre
Hello,
After I update from 20 to 22. there is a graphics issue.
It works fine with a Live version.
This what I did in the past (2013). Should I do the same?
Xorg -configure
cvt 1440 900
xrandr -q
create /etc/X11/xorg.conf.d/40-monitor.conf and
/etc/X11/xorg.conf.d/50-screen.conf
Check /var/log/Xorg.0.log
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 10 months
Fedora 21 Install: Stuck at "Installing software 12%"
by Steven P. Ulrick
Hello, Everyone
Just put a new Seagate 2TB hard drive in the computer that I use as a
media server. I proceeded to install the KDE spin of Fedora 21 from a
flash drive. Everything went fine, but the progress indicator is
stuck at "Installing software 12%" Has been stuck there for about 10
minutes or more.
So, I WAS wondering what was wrong... Then I saw the following at the
bottom of the screen:
Fedora is now successfully installed and ready for you to use!
Go ahead and reboot to start using it!
In the lower right hand corner is a button that says "Quit"
So, I'm going to click that button and see what happens...
Steven P. Ulrick
8 years, 10 months
chromecast: Fedora vs Windows
by Timothy Murphy
Sadly, I find that chromecast (under google chrome) performs much better
under Windows 7 than under Fedora-22 (on the same laptop).
Under Fedora the reception is very jumpy.
Admittedly this is with a rather low - 6.5Mb/s - internet speed.
I wonder if this is a common experience?
--
Timothy Murphy
gayleard /at/ eircom.net
School of Mathematics, Trinity College, Dublin
8 years, 10 months
Re: fedup 20 -> 21 -> xinit -> KDE -> open /dev/fb0: No such file or directory
by Ed Greshko
On 07/28/15 11:41, richard emberson wrote:
> ]# journalctl -b 0 | grep -i mouse
> Jul 27 19:52:02 localhost.localdomain kernel: mousedev: PS/2 mouse device common for all mice
> Jul 27 19:52:02 localhost.localdomain kernel: usb 7-1: Product: USB Optical Mouse
> Jul 27 19:52:02 localhost.localdomain kernel: input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:093A:2510.0001/input/input6
> Jul 27 19:52:02 localhost.localdomain kernel: hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-1/input0
> Jul 27 19:52:02 localhost.localdomain kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0, board id: 0, fw id: 496485
> Jul 27 19:52:49 localhost.localdomain kernel: input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input10
> Jul 27 19:52:49 localhost.localdomain kernel: IR MCE Keyboard/mouse protocol handler initialized
> # journalctl -b 0 | grep -i keyb
> Jul 27 19:52:02 localhost.localdomain kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> Jul 27 19:52:49 localhost.localdomain kernel: input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input10
> Jul 27 19:52:49 localhost.localdomain kernel: IR MCE Keyboard/mouse protocol handler initialized
>
> I appreciate the help. I've been downloading the fedora 22
> workstation and server dvds just in case.
> Re-installing my laptops is not much of a problem, its my home
> servers where I want to be sure prior to going from fedora x to x+1.
> Also, I'd like to keep using KDE, but, at least for this laptop,
> that may not be possible.
Well, that all looks in order.
So, you are able to boot and you do get a graphical login screen, but you don't get a cursor and you can't type a password.
You looked in the fedup log, located in /var/log, and see no errors.
I'm fairly sure the lack of XINPUT lines in the Xorg log is telling....just have no idea what could be the issue.
I've not had a failure in fedup such as this and I've been using it for the past several releases.
--
If I wanted a blog or social media I'd go elsewhere
8 years, 10 months