Ok...guess I have to get this build going after all. Getting halfway through the make, then failing with the following error. Doh! Attacked the cyrus install again. Did a make clean, then changed my mind and deleted entire folder and started all over with it. For some reason, the sasl make seemed to go this time(maybe I just needed to blow the folder out last time)...but, the make on ldapserver still failed. See below for log(snipped out bits of spam...) On the bright side...I'm actually learning lots! =D ==================================================================== [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - tar: Read 2048 bytes from - [root@genie ds]# cd cyrus-sasl-2.1.20 [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure --enable-gssapi=/usr/kerberos/include/--enable-static --without-des --without-openssl configure: creating cache ./config.cache checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu -------------------- SNIP Successful Config updating cache .././config.cache configure: creating ./config.status config.status: creating Makefile config.status: creating saslauthd.h config.status: executing depfiles commands Configuration Complete. Type 'make' to build. [root@genie cyrus-sasl-2.1.20]# ########################## Onto the make... ########################## Configuration Complete. Type 'make' to build. [root@genie cyrus-sasl-2.1.20]# gmake gmake all-recursive gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' Making all in include gmake[2]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o -MD -MP -MF ".deps/makemd5.Tpo" \ -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ else rm -f ".deps/makemd5.Tpo"; exit 1; \ fi /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv mkdir .libs ------------------- SNIP Make spam ---------------------------- if gcc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \ -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo './'`saslauthd-main.c; \ then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \ else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \ fi if gcc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT md5.o -MD -MP -MF ".deps/md5.Tpo" \ -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \ then mv ".deps/md5.Tpo" ".deps/md5.Po"; \ else rm -f ".deps/md5.Tpo"; exit 1; \ fi gcc -O2 -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv -lresolv gmake[3]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' gmake[2]: Entering directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' gmake[1]: Leaving directory `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' [root@genie cyrus-sasl-2.1.20]# ####################################### Seems to have compiled right that time for some reason...weird... ####################################### [root@genie cyrus-sasl-2.1.20]# cd .. [root@genie ds]# ls 09.23 icu-2.4.tgz 09.27 ldapserver cyrus-sasl-2.1.20 mozilla cyrus-sasl-2.1.20.tar.gz mozilla-components.tar.gz db-4.2.52.NC net-snmp-5.2.1 db-4.2.52.NC.tar.gz net-snmp-5.2.1.tar.gz fedora-adminutil-devel-7.1 patch.4.2.52.1 fedora-adminutil-devel-7.1.tar.gz patch.4.2.52.2 fedora-setuputil-devel-7.1 patch.4.2.52.3 fedora-setuputil-devel-7.1.tar.gz patch.4.2.52.4 icu [root@genie ds]# cd ldapserver/ [root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi; /usr/bin/perl buildnum.pl -p Linux NSOS_RELEASE is: 2.6 /usr/bin/perl pumpkin.pl 120 pumpkin.dat The components are up to date ==== Starting LDAP Server ========== gmake BUILD_OPT=1 NO_JAVA=1 nsCommon gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver' -------------------------- SNIP Make Spam .o ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server -lslapd -lldapu -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 -lprldap50 -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 -lplds4 -lnspr4 -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm -lavl -lldif -llitekey -ldl -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2 /usr/bin/ld: cannot find -lsasl2 collect2: ld returned 1 exit status gmake[3]: *** [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd] Error 1 gmake[3]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd' gmake[2]: *** [_slapd] Error 2 gmake[2]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers' gmake[1]: *** [ldapprogs] Error 2 gmake[1]: Leaving directory `/root/Desktop/dsbuild-static/ds/ldapserver/ldap' gmake: *** [buildDirectory] Error 2 [root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib auxprop.c client.lo dlopen.o Makefile.in saslutil.o auxprop.lo client.o external.c md5.c server.c auxprop.o common.c external.lo md5.lo server.lo canonusr.c common.lo external.o md5.o server.o canonusr.lo common.o getaddrinfo.c NTMakefile seterror.c canonusr.o config.c getnameinfo.c plugin_common.lo seterror.lo checkpw.c config.lo getsubopt.c plugin_common.o seterror.o checkpw.lo config.o libsasl2.la saslint.h snprintf.c checkpw.o dlopen.c Makefile saslutil.c staticopen.h client.c dlopen.lo Makefile.am saslutil.lo windlopen.c [root@genie ldapserver]# -- Fedora-directory-users mailing list Fedora-directory-users(a)redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users

My cyrus sasl build creates a symbolic link to the lib directory like this. Do you see it in your build log? > [...] > adding static plugins and dependencies > ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o > ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o > ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o > rm -f libsasl2.a > *ln -s .libs/libsasl2.a libsasl2.a* > gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib' --noriko Richard Megginson wrote: > There is still no libsasl2.a. I'm not sure what the problem is. Try > using "make" instead of "gmake" - perhaps gmake is slightly different > on your OS/version? >

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

/dev/null 2>&1

This info was great, thanks. My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 and I noticed a few differences. One is when configure is checking for database support (db, ndbm, etc). It is found for me, not for you. Can you try installing db4-devel-4.1.25-8.1 (or whatever the equivalent is on FC3)? Another difference I saw is in pam_start in -lpam. I don't know if this is anything to worry about or not. rob Jason Kullo Sam wrote: > Noriko Hosoi wrote: > >> My cyrus sasl build creates a symbolic link to the lib directory >> like this. Do you see it in your build log? >> >>> [...] >>> adding static plugins and dependencies >>> ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o >>> ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o >>> ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o >>> rm -f libsasl2.a >>> *ln -s .libs/libsasl2.a libsasl2.a* >>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib' >> >> >> >> >> --noriko >> >> Richard Megginson wrote: >> >>> There is still no libsasl2.a. I'm not sure what the problem is. >>> Try using "make" instead of "gmake" - perhaps gmake is slightly >>> different on your OS/version? >>> > =========================== > Answering both of these... > I cleaned and blew up the directory again, and started over. Even > fixed a typo in the configure portion(apparently this typo allowed it > to finish before). The configureation was done, but the make failed. > It doesn't look like it ever even MAKES the libsasl2.a, nevermind > links it... > > Here's the whole shabang in case my noobness is leaving something > important out... > ================================================================= > [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - > tar: Read 2048 bytes from - > [root@genie ds]# cd cyrus-sasl-2.1.20 > [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure > --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des > --without-openssl > configure: creating cache ./config.cache > checking build system type... i686-pc-linux-gnu > checking host system type... i686-pc-linux-gnu > checking target system type... i686-pc-linux-gnu > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for gawk... gawk > checking whether make sets $(MAKE)... yes > checking for gcc... gcc > checking for C compiler default output... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ANSI C... none needed > checking for style of include used by make... GNU > checking dependency style of gcc... gcc3 > checking how to run the C preprocessor... gcc -E > checking for gawk... (cached) gawk > checking whether ln -s works... yes > checking whether make sets $(MAKE)... (cached) yes > checking for a BSD-compatible install... /usr/bin/install -c > checking for __attribute__... yes > checking for runpath switch... -Wl,-rpath, > checking for ranlib... ranlib > checking for ld used by GCC... /usr/bin/ld > checking if the linker (/usr/bin/ld) is GNU ld... yes > checking for BSD-compatible nm... /usr/bin/nm -B > updating cache ./config.cache > loading cache ./config.cache within ltconfig > checking for object suffix... o > checking for executable suffix... (cached) > checking for gcc option to produce PIC... -fPIC > checking if gcc PIC flag -fPIC works... yes > checking if gcc supports -c -o file.o... yes > checking if gcc supports -c -o file.lo... yes > checking if gcc supports -fno-rtti -fno-exceptions ... no > checking if gcc static flag -static works... -static > checking if the linker (/usr/bin/ld) is GNU ld... yes > checking whether the linker (/usr/bin/ld) supports shared > libraries... yes > checking command to parse /usr/bin/nm -B output... ok > checking how to hardcode library paths into programs... immediate > checking for /usr/bin/ld option to reload object files... -r > checking dynamic linker characteristics... Linux ld.so > checking if libtool supports shared libraries... yes > checking whether to build shared libraries... yes > checking whether to build static libraries... yes > checking for objdir... .libs > creating libtool > updating cache ./config.cache > configure: loading cache ./config.cache > checking for connect... yes > checking for res_search... no > checking for res_search in -lresolv... yes > checking for dn_expand... yes > checking for dns_lookup... no > checking DB path to use... /etc/sasldb2 > checking for egrep... grep -E > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking db.h usability... no > checking db.h presence... no > checking for db.h... no > checking ndbm.h usability... no > checking ndbm.h presence... no > checking for ndbm.h... no > checking gdbm.h usability... no > checking gdbm.h presence... no > checking for gdbm.h... no > checking DB library to use... no > configure: WARNING: Disabling SASL authentication database support > checking for dlopen in -ldl... yes > checking /dev/random to use... /dev/random > checking for nm... /usr/bin/nm -B > checking for underscore before symbols... no > checking for syslog... yes > checking for pam_start in -lpam... no > checking if I should include saslauthd... /var/state/saslauthd > checking to include Courier authdaemond support... /dev/null > checking if I should include pwcheck... no > checking if I should include the alwaystrue verifier... no > checking if we should enable sasl_checkapop... enabled > checking CRAM-MD5... enabled > checking for OpenSSL... no > configure: WARNING: No DES support for DIGEST-MD5 > checking DIGEST-MD5... enabled > configure: WARNING: OpenSSL not found -- OTP will be disabled > checking OTP... disabled > configure: WARNING: OpenSSL not found -- SRP will be disabled > checking SRP... disabled > checking KERBEROS_V4... disabled > checking for crypt... no > checking for crypt in -lcrypt... yes > checking gssapi.h usability... no > checking gssapi.h presence... no > checking for gssapi.h... no > checking gssapi/gssapi.h usability... no > checking gssapi/gssapi.h presence... no > checking for gssapi/gssapi.h... no > configure: WARNING: Disabling GSSAPI - no include files found > checking GSSAPI... disabled > checking PLAIN... enabled > checking ANONYMOUS... enabled > checking LOGIN... disabled > configure: WARNING: OpenSSL not found -- NTLM will be disabled > checking NTLM... disabled > checking SQL... disabled > checking for dmalloc library... no > checking for sfio library... no > checking for getsubopt... yes > checking for snprintf... yes > checking for vsnprintf... yes > checking for inet_aton in -lresolv... yes > checking for getaddrinfo... yes > checking for gai_strerror... yes > checking for getnameinfo... yes > checking for an ANSI C-conforming const... yes > checking for inline... inline > checking for mode_t... yes > checking for pid_t... yes > checking return type of signal handlers... void > checking whether time.h and sys/time.h may both be included... yes > checking for ANSI C header files... (cached) yes > checking for dirent.h that defines DIR... yes > checking for library containing opendir... none required > checking for sys/wait.h that is POSIX.1 compatible... yes > checking dlfcn.h usability... yes > checking dlfcn.h presence... yes > checking for dlfcn.h... yes > checking fcntl.h usability... yes > checking fcntl.h presence... yes > checking for fcntl.h... yes > checking limits.h usability... yes > checking limits.h presence... yes > checking for limits.h... yes > checking malloc.h usability... yes > checking malloc.h presence... yes > checking for malloc.h... yes > checking paths.h usability... yes > checking paths.h presence... yes > checking for paths.h... yes > checking for strings.h... (cached) yes > checking sys/file.h usability... yes > checking sys/file.h presence... yes > checking for sys/file.h... yes > checking sys/time.h usability... yes > checking sys/time.h presence... yes > checking for sys/time.h... yes > checking syslog.h usability... yes > checking syslog.h presence... yes > checking for syslog.h... yes > checking for unistd.h... (cached) yes > checking for inttypes.h... (cached) yes > checking sys/uio.h usability... yes > checking sys/uio.h presence... yes > checking for sys/uio.h... yes > checking sys/param.h usability... yes > checking sys/param.h presence... yes > checking for sys/param.h... yes > checking sysexits.h usability... yes > checking sysexits.h presence... yes > checking for sysexits.h... yes > checking stdarg.h usability... yes > checking stdarg.h presence... yes > checking for stdarg.h... yes > checking varargs.h usability... no > checking varargs.h presence... no > checking for varargs.h... no > checking whether you have ss_family in struct sockaddr_storage... yes > checking whether you have sa_len in struct sockaddr... no > checking for socklen_t... yes > checking for gethostname... yes > checking for getdomainname... yes > checking for getpwnam... yes > checking for getspnam... yes > checking for gettimeofday... yes > checking for inet_aton... yes > checking for memcpy... yes > checking for mkdir... yes > checking for select... yes > checking for socket... yes > checking for strchr... yes > checking for strdup... yes > checking for strerror... yes > checking for strspn... yes > checking for strstr... yes > checking for strtol... yes > checking for jrand48... yes > updating cache ./config.cache > configure: creating ./config.status > config.status: creating Makefile > config.status: creating include/Makefile > config.status: creating sasldb/Makefile > config.status: creating plugins/Makefile > config.status: creating lib/Makefile > config.status: creating utils/Makefile > config.status: creating doc/Makefile > config.status: creating sample/Makefile > config.status: creating java/Makefile > config.status: creating java/CyrusSasl/Makefile > config.status: creating java/Test/Makefile > config.status: creating java/javax/Makefile > config.status: creating java/javax/security/Makefile > config.status: creating java/javax/security/auth/Makefile > config.status: creating java/javax/security/auth/callback/Makefile > config.status: creating pwcheck/Makefile > config.status: creating man/Makefile > config.status: creating config.h > config.status: executing depfiles commands > configure: configuring in saslauthd > configure: running /bin/sh './configure' --prefix=/usr/local > '--enable-gssapi=/usr/kerberos/include/' '--enable-static' > '--without-des' '--without-openssl' 'CFLAGS=-O2' > --cache-file=.././config.cache --srcdir=. > configure: loading cache .././config.cache > checking build system type... (cached) i686-pc-linux-gnu > checking host system type... (cached) i686-pc-linux-gnu > checking for a BSD-compatible install... (cached) /usr/bin/install -c > checking whether build environment is sane... yes > checking for gawk... (cached) gawk > checking whether make sets $(MAKE)... (cached) yes > checking for gcc... (cached) gcc > checking for C compiler default output... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... (cached) o > checking whether we are using the GNU C compiler... (cached) yes > checking whether gcc accepts -g... (cached) yes > checking for gcc option to accept ANSI C... (cached) none needed > checking for style of include used by make... GNU > checking dependency style of gcc... (cached) gcc3 > checking how to run the C preprocessor... (cached) gcc -E > checking for gawk... (cached) gawk > checking whether make sets $(MAKE)... (cached) yes > checking whether ln -s works... yes > checking for a BSD-compatible install... /usr/bin/install -c > checking for __attribute__... (cached) yes > checking for runpath switch... -Wl,-rpath, > checking for connect... (cached) yes > checking for res_search... (cached) no > checking for res_search in -lresolv... (cached) yes > checking for dn_expand... (cached) yes > checking for dns_lookup... (cached) no > checking for egrep... (cached) grep -E > checking for ANSI C header files... (cached) yes > checking for sys/types.h... (cached) yes > checking for sys/stat.h... (cached) yes > checking for stdlib.h... (cached) yes > checking for string.h... (cached) yes > checking for memory.h... (cached) yes > checking for strings.h... (cached) yes > checking for inttypes.h... (cached) yes > checking for stdint.h... (cached) yes > checking for unistd.h... (cached) yes > checking for OpenSSL... no > checking KERBEROS_V4... disabled > checking for crypt... (cached) no > checking for crypt in -lcrypt... (cached) yes > checking for gssapi.h... (cached) no > checking for gssapi/gssapi.h... (cached) no > configure: WARNING: Disabling GSSAPI - no include files found > checking GSSAPI... disabled > checking for crypt... (cached) no > checking for crypt in -lcrypt... (cached) yes > checking for pam_start in -lpam... (cached) no > checking for PAM support... no > checking for inet_aton in -lresolv... (cached) yes > checking to include LDAP support... no > checking for ANSI C header files... (cached) yes > checking for sys/wait.h that is POSIX.1 compatible... (cached) yes > checking whether time.h and sys/time.h may both be included... > (cached) yes > checking crypt.h usability... yes > checking crypt.h presence... yes > checking for crypt.h... yes > checking for fcntl.h... (cached) yes > checking krb5.h usability... no > checking krb5.h presence... no > checking for krb5.h... no > checking for strings.h... (cached) yes > checking for syslog.h... (cached) yes > checking for unistd.h... (cached) yes > checking for sys/time.h... (cached) yes > checking for sys/uio.h... (cached) yes > checking for an ANSI C-conforming const... (cached) yes > checking for pid_t... (cached) yes > checking whether gcc implements __func__... yes > checking return type of signal handlers... (cached) void > checking for gethostname... (cached) yes > checking for mkdir... (cached) yes > checking for socket... (cached) yes > checking for strdup... (cached) yes > checking for getspnam... (cached) yes > checking for strlcat... no > checking for strlcpy... no > checking for getaddrinfo... (cached) yes > checking for getnameinfo... (cached) yes > checking whether you have ss_family in struct sockaddr_storage... > (cached) yes > checking whether you have sa_len in struct sockaddr... (cached) no > checking for socklen_t... (cached) yes > updating cache .././config.cache > configure: creating ./config.status > config.status: creating Makefile > config.status: creating saslauthd.h > config.status: executing depfiles commands > Configuration Complete. Type 'make' to build. > [root@genie cyrus-sasl-2.1.20]# make > make all-recursive > make[1]: Entering directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' > Making all in include > make[2]: Entering directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' > if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o > -MD -MP -MF ".deps/makemd5.Tpo" \ > -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ > then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ > else rm -f ".deps/makemd5.Tpo"; exit 1; \ > fi > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 > makemd5.o -lresolv > mkdir .libs > gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv > rm -f md5global.h > ./makemd5 md5global.h > make[2]: Leaving directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' > Making all in sasldb > make[2]: Entering directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../include -Wall -W -O2 -MT allockey.lo -MD -MP > -MF ".deps/allockey.Tpo" \ > -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \ > then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \ > else rm -f ".deps/allockey.Tpo"; exit 1; \ > fi > mkdir .libs > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W > -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c > -fPIC -DPIC -o .libs/allockey.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W > -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o > allockey.o >/dev/null 2>&1 > mv -f .libs/allockey.lo allockey.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../include -Wall -W -O2 -MT db_none.lo -MD -MP -MF > ".deps/db_none.Tpo" \ > -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \ > then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \ > else rm -f ".deps/db_none.Tpo"; exit 1; \ > fi > rm -f .libs/db_none.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W > -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -fPIC > -DPIC -o .libs/db_none.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W > -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o > db_none.o >/dev/null 2>&1 > mv -f .libs/db_none.lo db_none.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasldb.la > allockey.lo db_none.lo -lresolv > rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.* > ar cru .libs/libsasldb.al allockey.lo db_none.lo > ranlib .libs/libsasldb.al > creating libsasldb.la > (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la) > ar cru .libs/libsasldb.a db_none.o > make[2]: Leaving directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' > Making all in plugins > make[2]: Entering directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > cram.lo -MD -MP -MF ".deps/cram.Tpo" \ > -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \ > then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \ > else rm -f ".deps/cram.Tpo"; exit 1; \ > fi > mkdir .libs > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c > cram.c -fPIC -DPIC -o .libs/cram.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c > cram.c -o cram.o >/dev/null 2>&1 > mv -f .libs/cram.lo cram.lo > /bin/sh ./makeinit.sh > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \ > -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo > './'`crammd5_init.c; \ > then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \ > else rm -f ".deps/crammd5_init.Tpo"; exit 1; \ > fi > rm -f .libs/crammd5_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF > .deps/crammd5_init.Tpo -c crammd5_init.c -fPIC -DPIC -o > .libs/crammd5_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF > .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o >/dev/null > 2>&1 > mv -f .libs/crammd5_init.lo crammd5_init.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ > -c -o plugin_common.lo `test -f 'plugin_common.c' || echo > './'`plugin_common.c; \ > then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ > else rm -f ".deps/plugin_common.Tpo"; exit 1; \ > fi > rm -f .libs/plugin_common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF > .deps/plugin_common.Tpo -c plugin_common.c -fPIC -DPIC -o > .libs/plugin_common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF > .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o > >/dev/null 2>&1 > mv -f .libs/plugin_common.lo plugin_common.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module > -export-dynamic -rpath /usr/lib/sasl2 -o libcrammd5.la > -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo -lresolv > rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.* > gcc -shared cram.lo crammd5_init.lo plugin_common.lo -lresolv -lc > -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20 > (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 > libcrammd5.so.2) > (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 > libcrammd5.so) > ar cru .libs/libcrammd5.a cram.o crammd5_init.o plugin_common.o > ranlib .libs/libcrammd5.a > creating libcrammd5.la > (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la > libcrammd5.la) > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \ > -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \ > then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \ > else rm -f ".deps/digestmd5.Tpo"; exit 1; \ > fi > rm -f .libs/digestmd5.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF > .deps/digestmd5.Tpo -c digestmd5.c -fPIC -DPIC -o .libs/digestmd5.lo > digestmd5.c: In function `digestmd5_server_mech_step2': > digestmd5.c:2093: warning: dereferencing type-punned pointer will > break strict-aliasing rules > digestmd5.c:2110: warning: dereferencing type-punned pointer will > break strict-aliasing rules > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF > .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1 > mv -f .libs/digestmd5.lo digestmd5.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \ > -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo > './'`digestmd5_init.c; \ > then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \ > else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \ > fi > rm -f .libs/digestmd5_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF > .deps/digestmd5_init.Tpo -c digestmd5_init.c -fPIC -DPIC -o > .libs/digestmd5_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF > .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o > >/dev/null 2>&1 > mv -f .libs/digestmd5_init.lo digestmd5_init.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module > -export-dynamic -rpath /usr/lib/sasl2 -o libdigestmd5.la > -version-info 2:20:0 digestmd5.lo digestmd5_init.lo plugin_common.lo > -lresolv -lresolv > rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.* > gcc -shared digestmd5.lo digestmd5_init.lo plugin_common.lo > -lresolv -lresolv -lc -Wl,-soname -Wl,libdigestmd5.so.2 -o > .libs/libdigestmd5.so.2.0.20 > (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20 > libdigestmd5.so.2) > (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 > libdigestmd5.so) > ar cru .libs/libdigestmd5.a digestmd5.o digestmd5_init.o > plugin_common.o > ranlib .libs/libdigestmd5.a > creating libdigestmd5.la > (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la > libdigestmd5.la) > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > plain.lo -MD -MP -MF ".deps/plain.Tpo" \ > -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \ > then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \ > else rm -f ".deps/plain.Tpo"; exit 1; \ > fi > rm -f .libs/plain.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c > plain.c -fPIC -DPIC -o .libs/plain.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c > plain.c -o plain.o >/dev/null 2>&1 > mv -f .libs/plain.lo plain.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \ > -c -o plain_init.lo `test -f 'plain_init.c' || echo > './'`plain_init.c; \ > then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \ > else rm -f ".deps/plain_init.Tpo"; exit 1; \ > fi > rm -f .libs/plain_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF > .deps/plain_init.Tpo -c plain_init.c -fPIC -DPIC -o .libs/plain_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF > .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1 > mv -f .libs/plain_init.lo plain_init.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module > -export-dynamic -rpath /usr/lib/sasl2 -o libplain.la -version-info > 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt -lresolv > rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.* > gcc -shared plain.lo plain_init.lo plugin_common.lo -lcrypt > -lresolv -lc -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20 > (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20 > libplain.so.2) > (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so) > ar cru .libs/libplain.a plain.o plain_init.o plugin_common.o > ranlib .libs/libplain.a > creating libplain.la > (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la) > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \ > -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \ > then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \ > else rm -f ".deps/anonymous.Tpo"; exit 1; \ > fi > rm -f .libs/anonymous.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF > .deps/anonymous.Tpo -c anonymous.c -fPIC -DPIC -o .libs/anonymous.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF > .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1 > mv -f .libs/anonymous.lo anonymous.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 -MT > anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \ > -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo > './'`anonymous_init.c; \ > then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \ > else rm -f ".deps/anonymous_init.Tpo"; exit 1; \ > fi > rm -f .libs/anonymous_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF > .deps/anonymous_init.Tpo -c anonymous_init.c -fPIC -DPIC -o > .libs/anonymous_init.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb > -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF > .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o > >/dev/null 2>&1 > mv -f .libs/anonymous_init.lo anonymous_init.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module > -export-dynamic -rpath /usr/lib/sasl2 -o libanonymous.la > -version-info 2:20:0 anonymous.lo anonymous_init.lo plugin_common.lo > -lresolv > rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.* > gcc -shared anonymous.lo anonymous_init.lo plugin_common.lo > -lresolv -lc -Wl,-soname -Wl,libanonymous.so.2 -o > .libs/libanonymous.so.2.0.20 > (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20 > libanonymous.so.2) > (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 > libanonymous.so) > ar cru .libs/libanonymous.a anonymous.o anonymous_init.o > plugin_common.o > ranlib .libs/libanonymous.a > creating libanonymous.la > (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la > libanonymous.la) > make[2]: Leaving directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' > Making all in lib > make[2]: Entering directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT auxprop.lo > -MD -MP -MF ".deps/auxprop.Tpo" \ > -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \ > then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \ > else rm -f ".deps/auxprop.Tpo"; exit 1; \ > fi > mkdir .libs > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF > .deps/auxprop.Tpo -c auxprop.c -fPIC -DPIC -o .libs/auxprop.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF > .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1 > mv -f .libs/auxprop.lo auxprop.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT > canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \ > -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \ > then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \ > else rm -f ".deps/canonusr.Tpo"; exit 1; \ > fi > rm -f .libs/canonusr.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF > .deps/canonusr.Tpo -c canonusr.c -fPIC -DPIC -o .libs/canonusr.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF > .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1 > mv -f .libs/canonusr.lo canonusr.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT checkpw.lo > -MD -MP -MF ".deps/checkpw.Tpo" \ > -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \ > then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \ > else rm -f ".deps/checkpw.Tpo"; exit 1; \ > fi > rm -f .libs/checkpw.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF > .deps/checkpw.Tpo -c checkpw.c -fPIC -DPIC -o .libs/checkpw.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF > .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1 > mv -f .libs/checkpw.lo checkpw.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT client.lo > -MD -MP -MF ".deps/client.Tpo" \ > -c -o client.lo `test -f 'client.c' || echo './'`client.c; \ > then mv ".deps/client.Tpo" ".deps/client.Plo"; \ > else rm -f ".deps/client.Tpo"; exit 1; \ > fi > rm -f .libs/client.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo > -c client.c -fPIC -DPIC -o .libs/client.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo > -c client.c -o client.o >/dev/null 2>&1 > mv -f .libs/client.lo client.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT common.lo > -MD -MP -MF ".deps/common.Tpo" \ > -c -o common.lo `test -f 'common.c' || echo './'`common.c; \ > then mv ".deps/common.Tpo" ".deps/common.Plo"; \ > else rm -f ".deps/common.Tpo"; exit 1; \ > fi > rm -f .libs/common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo > -c common.c -fPIC -DPIC -o .libs/common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo > -c common.c -o common.o >/dev/null 2>&1 > mv -f .libs/common.lo common.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT config.lo > -MD -MP -MF ".deps/config.Tpo" \ > -c -o config.lo `test -f 'config.c' || echo './'`config.c; \ > then mv ".deps/config.Tpo" ".deps/config.Plo"; \ > else rm -f ".deps/config.Tpo"; exit 1; \ > fi > rm -f .libs/config.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo > -c config.c -fPIC -DPIC -o .libs/config.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo > -c config.c -o config.o >/dev/null 2>&1 > mv -f .libs/config.lo config.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT > external.lo -MD -MP -MF ".deps/external.Tpo" \ > -c -o external.lo `test -f 'external.c' || echo './'`external.c; \ > then mv ".deps/external.Tpo" ".deps/external.Plo"; \ > else rm -f ".deps/external.Tpo"; exit 1; \ > fi > rm -f .libs/external.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF > .deps/external.Tpo -c external.c -fPIC -DPIC -o .libs/external.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF > .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1 > mv -f .libs/external.lo external.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT md5.lo -MD > -MP -MF ".deps/md5.Tpo" \ > -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \ > then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \ > else rm -f ".deps/md5.Tpo"; exit 1; \ > fi > rm -f .libs/md5.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c > md5.c -fPIC -DPIC -o .libs/md5.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c > md5.c -o md5.o >/dev/null 2>&1 > mv -f .libs/md5.lo md5.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT > saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \ > -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \ > then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \ > else rm -f ".deps/saslutil.Tpo"; exit 1; \ > fi > rm -f .libs/saslutil.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF > .deps/saslutil.Tpo -c saslutil.c -fPIC -DPIC -o .libs/saslutil.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF > .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1 > mv -f .libs/saslutil.lo saslutil.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT server.lo > -MD -MP -MF ".deps/server.Tpo" \ > -c -o server.lo `test -f 'server.c' || echo './'`server.c; \ > then mv ".deps/server.Tpo" ".deps/server.Plo"; \ > else rm -f ".deps/server.Tpo"; exit 1; \ > fi > rm -f .libs/server.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo > -c server.c -fPIC -DPIC -o .libs/server.lo > server.c: In function `sasl_setpass': > server.c:151: warning: dereferencing type-punned pointer will break > strict-aliasing rules > server.c: In function `sasl_server_start': > server.c:1245: warning: dereferencing type-punned pointer will break > strict-aliasing rules > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo > -c server.c -o server.o >/dev/null 2>&1 > mv -f .libs/server.lo server.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT > seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \ > -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \ > then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \ > else rm -f ".deps/seterror.Tpo"; exit 1; \ > fi > rm -f .libs/seterror.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF > .deps/seterror.Tpo -c seterror.c -fPIC -DPIC -o .libs/seterror.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF > .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1 > mv -f .libs/seterror.lo seterror.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT dlopen.lo > -MD -MP -MF ".deps/dlopen.Tpo" \ > -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \ > then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \ > else rm -f ".deps/dlopen.Tpo"; exit 1; \ > fi > rm -f .libs/dlopen.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo > -c dlopen.c -fPIC -DPIC -o .libs/dlopen.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo > -c dlopen.c -o dlopen.o >/dev/null 2>&1 > mv -f .libs/dlopen.lo dlopen.lo > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. > -I../include -I../plugins -I../include -Wall -W -O2 -MT > plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ > -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || echo > './'`../plugins/plugin_common.c; \ > then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ > else rm -f ".deps/plugin_common.Tpo"; exit 1; \ > fi > rm -f .libs/plugin_common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF > .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -fPIC -DPIC -o > .libs/plugin_common.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF > .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o > plugin_common.o >/dev/null 2>&1 > mv -f .libs/plugin_common.lo plugin_common.lo > /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasl2.la > -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo > checkpw.lo client.lo common.lo config.lo external.lo md5.lo > saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo -ldl > -lresolv -lresolv > rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.* > gcc -shared auxprop.lo canonusr.lo checkpw.lo client.lo common.lo > config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo > dlopen.lo plugin_common.lo -ldl -lresolv -lresolv -lc -Wl,-soname > -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20 > (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20 > libsasl2.so.2) > (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so) > ar cru .libs/libsasl2.a auxprop.o canonusr.o checkpw.o client.o > common.o config.o external.o md5.o saslutil.o server.o seterror.o > dlopen.o plugin_common.o > ranlib .libs/libsasl2.a > creating libsasl2.la > (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la) > if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins > -I../include -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF > ".deps/../plugins/sasldb.Tpo" \ > -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo > './'`../plugins/sasldb.c; \ > then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po"; \ > else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \ > fi > ../plugins/sasldb.c:129: fatal error: opening dependency file > .deps/../plugins/sasldb.Tpo: No such file or directory > compilation terminated. > make[2]: *** [../plugins/sasldb.o] Error 1 > make[2]: Leaving directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' > make: *** [all] Error 2 > [root@genie cyrus-sasl-2.1.20]# > > -- > Fedora-directory-users mailing list > Fedora-directory-users(a)redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users ------------------------------------------------------------------------ -- Fedora-directory-users mailing list Fedora-directory-users(a)redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users

Holy cats...it worked! Cyrus is goin now... And, db4-devel is the same name in FC3...yum is even nice enough to have it!

Nathan Kinder wrote: > In addition to what Rob mentioned below, your build is not finding the > gssapi header files. I checked on my FC3 machine, and the gssapi > include location is /usr/include/gssapi. You should change your > configure line to have "--enable-gssapi=/usr/include/gssapi". > > -NGK > > Rob Crittenden wrote: > >> This info was great, thanks. >> >> My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 >> and I noticed a few differences. >> >> One is when configure is checking for database support (db, ndbm, >> etc). It is found for me, not for you. >> >> Can you try installing db4-devel-4.1.25-8.1 (or whatever the >> equivalent is on FC3)? >> >> Another difference I saw is in pam_start in -lpam. I don't know if >> this is anything to worry about or not. >> >> rob >> >> Jason Kullo Sam wrote: >> >>> Noriko Hosoi wrote: >>> >>>> My cyrus sasl build creates a symbolic link to the lib directory >>>> like this. Do you see it in your build log? >>>> >>>>> [...] >>>>> adding static plugins and dependencies >>>>> ar cru .libs/libsasl2.a ../plugins/sasldb.o >>>>> ../sasldb/db_berkeley.o ../sasldb/allockey.o ../plugins/cram.o >>>>> ../plugins/digestmd5.o ../plugins/gssapi.o ../plugins/plain.o >>>>> ../plugins/anonymous.o >>>>> rm -f libsasl2.a >>>>> *ln -s .libs/libsasl2.a libsasl2.a* >>>>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib' >>>> >>>> >>>> >>>> >>>> >>>> >>>> --noriko >>>> >>>> Richard Megginson wrote: >>>> >>>>> There is still no libsasl2.a. I'm not sure what the problem is. >>>>> Try using "make" instead of "gmake" - perhaps gmake is slightly >>>>> different on your OS/version? >>>>> >>> =========================== >>> Answering both of these... >>> I cleaned and blew up the directory again, and started over. Even >>> fixed a typo in the configure portion(apparently this typo allowed >>> it to finish before). The configureation was done, but the make >>> failed. It doesn't look like it ever even MAKES the libsasl2.a, >>> nevermind links it... >>> >>> Here's the whole shabang in case my noobness is leaving something >>> important out... >>> ================================================================= >>> [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - >>> tar: Read 2048 bytes from - >>> [root@genie ds]# cd cyrus-sasl-2.1.20 >>> [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure >>> --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des >>> --without-openssl >>> configure: creating cache ./config.cache >>> checking build system type... i686-pc-linux-gnu >>> checking host system type... i686-pc-linux-gnu >>> checking target system type... i686-pc-linux-gnu >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking whether build environment is sane... yes >>> checking for gawk... gawk >>> checking whether make sets $(MAKE)... yes >>> checking for gcc... gcc >>> checking for C compiler default output... a.out >>> checking whether the C compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... o >>> checking whether we are using the GNU C compiler... yes >>> checking whether gcc accepts -g... yes >>> checking for gcc option to accept ANSI C... none needed >>> checking for style of include used by make... GNU >>> checking dependency style of gcc... gcc3 >>> checking how to run the C preprocessor... gcc -E >>> checking for gawk... (cached) gawk >>> checking whether ln -s works... yes >>> checking whether make sets $(MAKE)... (cached) yes >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking for __attribute__... yes >>> checking for runpath switch... -Wl,-rpath, >>> checking for ranlib... ranlib >>> checking for ld used by GCC... /usr/bin/ld >>> checking if the linker (/usr/bin/ld) is GNU ld... yes >>> checking for BSD-compatible nm... /usr/bin/nm -B >>> updating cache ./config.cache >>> loading cache ./config.cache within ltconfig >>> checking for object suffix... o >>> checking for executable suffix... (cached) >>> checking for gcc option to produce PIC... -fPIC >>> checking if gcc PIC flag -fPIC works... yes >>> checking if gcc supports -c -o file.o... yes >>> checking if gcc supports -c -o file.lo... yes >>> checking if gcc supports -fno-rtti -fno-exceptions ... no >>> checking if gcc static flag -static works... -static >>> checking if the linker (/usr/bin/ld) is GNU ld... yes >>> checking whether the linker (/usr/bin/ld) supports shared >>> libraries... yes >>> checking command to parse /usr/bin/nm -B output... ok >>> checking how to hardcode library paths into programs... immediate >>> checking for /usr/bin/ld option to reload object files... -r >>> checking dynamic linker characteristics... Linux ld.so >>> checking if libtool supports shared libraries... yes >>> checking whether to build shared libraries... yes >>> checking whether to build static libraries... yes >>> checking for objdir... .libs >>> creating libtool >>> updating cache ./config.cache >>> configure: loading cache ./config.cache >>> checking for connect... yes >>> checking for res_search... no >>> checking for res_search in -lresolv... yes >>> checking for dn_expand... yes >>> checking for dns_lookup... no >>> checking DB path to use... /etc/sasldb2 >>> checking for egrep... grep -E >>> checking for ANSI C header files... yes >>> checking for sys/types.h... yes >>> checking for sys/stat.h... yes >>> checking for stdlib.h... yes >>> checking for string.h... yes >>> checking for memory.h... yes >>> checking for strings.h... yes >>> checking for inttypes.h... yes >>> checking for stdint.h... yes >>> checking for unistd.h... yes >>> checking db.h usability... no >>> checking db.h presence... no >>> checking for db.h... no >>> checking ndbm.h usability... no >>> checking ndbm.h presence... no >>> checking for ndbm.h... no >>> checking gdbm.h usability... no >>> checking gdbm.h presence... no >>> checking for gdbm.h... no >>> checking DB library to use... no >>> configure: WARNING: Disabling SASL authentication database support >>> checking for dlopen in -ldl... yes >>> checking /dev/random to use... /dev/random >>> checking for nm... /usr/bin/nm -B >>> checking for underscore before symbols... no >>> checking for syslog... yes >>> checking for pam_start in -lpam... no >>> checking if I should include saslauthd... /var/state/saslauthd >>> checking to include Courier authdaemond support... /dev/null >>> checking if I should include pwcheck... no >>> checking if I should include the alwaystrue verifier... no >>> checking if we should enable sasl_checkapop... enabled >>> checking CRAM-MD5... enabled >>> checking for OpenSSL... no >>> configure: WARNING: No DES support for DIGEST-MD5 >>> checking DIGEST-MD5... enabled >>> configure: WARNING: OpenSSL not found -- OTP will be disabled >>> checking OTP... disabled >>> configure: WARNING: OpenSSL not found -- SRP will be disabled >>> checking SRP... disabled >>> checking KERBEROS_V4... disabled >>> checking for crypt... no >>> checking for crypt in -lcrypt... yes >>> checking gssapi.h usability... no >>> checking gssapi.h presence... no >>> checking for gssapi.h... no >>> checking gssapi/gssapi.h usability... no >>> checking gssapi/gssapi.h presence... no >>> checking for gssapi/gssapi.h... no >>> configure: WARNING: Disabling GSSAPI - no include files found >>> checking GSSAPI... disabled >>> checking PLAIN... enabled >>> checking ANONYMOUS... enabled >>> checking LOGIN... disabled >>> configure: WARNING: OpenSSL not found -- NTLM will be disabled >>> checking NTLM... disabled >>> checking SQL... disabled >>> checking for dmalloc library... no >>> checking for sfio library... no >>> checking for getsubopt... yes >>> checking for snprintf... yes >>> checking for vsnprintf... yes >>> checking for inet_aton in -lresolv... yes >>> checking for getaddrinfo... yes >>> checking for gai_strerror... yes >>> checking for getnameinfo... yes >>> checking for an ANSI C-conforming const... yes >>> checking for inline... inline >>> checking for mode_t... yes >>> checking for pid_t... yes >>> checking return type of signal handlers... void >>> checking whether time.h and sys/time.h may both be included... yes >>> checking for ANSI C header files... (cached) yes >>> checking for dirent.h that defines DIR... yes >>> checking for library containing opendir... none required >>> checking for sys/wait.h that is POSIX.1 compatible... yes >>> checking dlfcn.h usability... yes >>> checking dlfcn.h presence... yes >>> checking for dlfcn.h... yes >>> checking fcntl.h usability... yes >>> checking fcntl.h presence... yes >>> checking for fcntl.h... yes >>> checking limits.h usability... yes >>> checking limits.h presence... yes >>> checking for limits.h... yes >>> checking malloc.h usability... yes >>> checking malloc.h presence... yes >>> checking for malloc.h... yes >>> checking paths.h usability... yes >>> checking paths.h presence... yes >>> checking for paths.h... yes >>> checking for strings.h... (cached) yes >>> checking sys/file.h usability... yes >>> checking sys/file.h presence... yes >>> checking for sys/file.h... yes >>> checking sys/time.h usability... yes >>> checking sys/time.h presence... yes >>> checking for sys/time.h... yes >>> checking syslog.h usability... yes >>> checking syslog.h presence... yes >>> checking for syslog.h... yes >>> checking for unistd.h... (cached) yes >>> checking for inttypes.h... (cached) yes >>> checking sys/uio.h usability... yes >>> checking sys/uio.h presence... yes >>> checking for sys/uio.h... yes >>> checking sys/param.h usability... yes >>> checking sys/param.h presence... yes >>> checking for sys/param.h... yes >>> checking sysexits.h usability... yes >>> checking sysexits.h presence... yes >>> checking for sysexits.h... yes >>> checking stdarg.h usability... yes >>> checking stdarg.h presence... yes >>> checking for stdarg.h... yes >>> checking varargs.h usability... no >>> checking varargs.h presence... no >>> checking for varargs.h... no >>> checking whether you have ss_family in struct sockaddr_storage... yes >>> checking whether you have sa_len in struct sockaddr... no >>> checking for socklen_t... yes >>> checking for gethostname... yes >>> checking for getdomainname... yes >>> checking for getpwnam... yes >>> checking for getspnam... yes >>> checking for gettimeofday... yes >>> checking for inet_aton... yes >>> checking for memcpy... yes >>> checking for mkdir... yes >>> checking for select... yes >>> checking for socket... yes >>> checking for strchr... yes >>> checking for strdup... yes >>> checking for strerror... yes >>> checking for strspn... yes >>> checking for strstr... yes >>> checking for strtol... yes >>> checking for jrand48... yes >>> updating cache ./config.cache >>> configure: creating ./config.status >>> config.status: creating Makefile >>> config.status: creating include/Makefile >>> config.status: creating sasldb/Makefile >>> config.status: creating plugins/Makefile >>> config.status: creating lib/Makefile >>> config.status: creating utils/Makefile >>> config.status: creating doc/Makefile >>> config.status: creating sample/Makefile >>> config.status: creating java/Makefile >>> config.status: creating java/CyrusSasl/Makefile >>> config.status: creating java/Test/Makefile >>> config.status: creating java/javax/Makefile >>> config.status: creating java/javax/security/Makefile >>> config.status: creating java/javax/security/auth/Makefile >>> config.status: creating java/javax/security/auth/callback/Makefile >>> config.status: creating pwcheck/Makefile >>> config.status: creating man/Makefile >>> config.status: creating config.h >>> config.status: executing depfiles commands >>> configure: configuring in saslauthd >>> configure: running /bin/sh './configure' --prefix=/usr/local >>> '--enable-gssapi=/usr/kerberos/include/' '--enable-static' >>> '--without-des' '--without-openssl' 'CFLAGS=-O2' >>> --cache-file=.././config.cache --srcdir=. >>> configure: loading cache .././config.cache >>> checking build system type... (cached) i686-pc-linux-gnu >>> checking host system type... (cached) i686-pc-linux-gnu >>> checking for a BSD-compatible install... (cached) /usr/bin/install -c >>> checking whether build environment is sane... yes >>> checking for gawk... (cached) gawk >>> checking whether make sets $(MAKE)... (cached) yes >>> checking for gcc... (cached) gcc >>> checking for C compiler default output... a.out >>> checking whether the C compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... (cached) o >>> checking whether we are using the GNU C compiler... (cached) yes >>> checking whether gcc accepts -g... (cached) yes >>> checking for gcc option to accept ANSI C... (cached) none needed >>> checking for style of include used by make... GNU >>> checking dependency style of gcc... (cached) gcc3 >>> checking how to run the C preprocessor... (cached) gcc -E >>> checking for gawk... (cached) gawk >>> checking whether make sets $(MAKE)... (cached) yes >>> checking whether ln -s works... yes >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking for __attribute__... (cached) yes >>> checking for runpath switch... -Wl,-rpath, >>> checking for connect... (cached) yes >>> checking for res_search... (cached) no >>> checking for res_search in -lresolv... (cached) yes >>> checking for dn_expand... (cached) yes >>> checking for dns_lookup... (cached) no >>> checking for egrep... (cached) grep -E >>> checking for ANSI C header files... (cached) yes >>> checking for sys/types.h... (cached) yes >>> checking for sys/stat.h... (cached) yes >>> checking for stdlib.h... (cached) yes >>> checking for string.h... (cached) yes >>> checking for memory.h... (cached) yes >>> checking for strings.h... (cached) yes >>> checking for inttypes.h... (cached) yes >>> checking for stdint.h... (cached) yes >>> checking for unistd.h... (cached) yes >>> checking for OpenSSL... no >>> checking KERBEROS_V4... disabled >>> checking for crypt... (cached) no >>> checking for crypt in -lcrypt... (cached) yes >>> checking for gssapi.h... (cached) no >>> checking for gssapi/gssapi.h... (cached) no >>> configure: WARNING: Disabling GSSAPI - no include files found >>> checking GSSAPI... disabled >>> checking for crypt... (cached) no >>> checking for crypt in -lcrypt... (cached) yes >>> checking for pam_start in -lpam... (cached) no >>> checking for PAM support... no >>> checking for inet_aton in -lresolv... (cached) yes >>> checking to include LDAP support... no >>> checking for ANSI C header files... (cached) yes >>> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes >>> checking whether time.h and sys/time.h may both be included... >>> (cached) yes >>> checking crypt.h usability... yes >>> checking crypt.h presence... yes >>> checking for crypt.h... yes >>> checking for fcntl.h... (cached) yes >>> checking krb5.h usability... no >>> checking krb5.h presence... no >>> checking for krb5.h... no >>> checking for strings.h... (cached) yes >>> checking for syslog.h... (cached) yes >>> checking for unistd.h... (cached) yes >>> checking for sys/time.h... (cached) yes >>> checking for sys/uio.h... (cached) yes >>> checking for an ANSI C-conforming const... (cached) yes >>> checking for pid_t... (cached) yes >>> checking whether gcc implements __func__... yes >>> checking return type of signal handlers... (cached) void >>> checking for gethostname... (cached) yes >>> checking for mkdir... (cached) yes >>> checking for socket... (cached) yes >>> checking for strdup... (cached) yes >>> checking for getspnam... (cached) yes >>> checking for strlcat... no >>> checking for strlcpy... no >>> checking for getaddrinfo... (cached) yes >>> checking for getnameinfo... (cached) yes >>> checking whether you have ss_family in struct sockaddr_storage... >>> (cached) yes >>> checking whether you have sa_len in struct sockaddr... (cached) no >>> checking for socklen_t... (cached) yes >>> updating cache .././config.cache >>> configure: creating ./config.status >>> config.status: creating Makefile >>> config.status: creating saslauthd.h >>> config.status: executing depfiles commands >>> Configuration Complete. Type 'make' to build. >>> [root@genie cyrus-sasl-2.1.20]# make >>> make all-recursive >>> make[1]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >>> Making all in include >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' >>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o >>> -MD -MP -MF ".deps/makemd5.Tpo" \ >>> -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ >>> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ >>> else rm -f ".deps/makemd5.Tpo"; exit 1; \ >>> fi >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 >>> makemd5.o -lresolv >>> mkdir .libs >>> gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv >>> rm -f md5global.h >>> ./makemd5 md5global.h >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' >>> Making all in sasldb >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../include -Wall -W -O2 -MT allockey.lo -MD >>> -MP -MF ".deps/allockey.Tpo" \ >>> -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \ >>> then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \ >>> else rm -f ".deps/allockey.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c >>> -fPIC -DPIC -o .libs/allockey.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o >>> allockey.o >/dev/null 2>&1 >>> mv -f .libs/allockey.lo allockey.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../include -Wall -W -O2 -MT db_none.lo -MD >>> -MP -MF ".deps/db_none.Tpo" \ >>> -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \ >>> then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \ >>> else rm -f ".deps/db_none.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/db_none.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -fPIC >>> -DPIC -o .libs/db_none.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o >>> db_none.o >/dev/null 2>&1 >>> mv -f .libs/db_none.lo db_none.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasldb.la >>> allockey.lo db_none.lo -lresolv >>> rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.* >>> ar cru .libs/libsasldb.al allockey.lo db_none.lo >>> ranlib .libs/libsasldb.al >>> creating libsasldb.la >>> (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la) >>> ar cru .libs/libsasldb.a db_none.o >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' >>> Making all in plugins >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT cram.lo -MD -MP -MF ".deps/cram.Tpo" \ >>> -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \ >>> then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \ >>> else rm -f ".deps/cram.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c >>> cram.c -fPIC -DPIC -o .libs/cram.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c >>> cram.c -o cram.o >/dev/null 2>&1 >>> mv -f .libs/cram.lo cram.lo >>> /bin/sh ./makeinit.sh >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \ >>> -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo >>> './'`crammd5_init.c; \ >>> then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \ >>> else rm -f ".deps/crammd5_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/crammd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF >>> .deps/crammd5_init.Tpo -c crammd5_init.c -fPIC -DPIC -o >>> .libs/crammd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF >>> .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/crammd5_init.lo crammd5_init.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ >>> -c -o plugin_common.lo `test -f 'plugin_common.c' || echo >>> './'`plugin_common.c; \ >>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c plugin_common.c -fPIC -DPIC -o >>> .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o >>> >/dev/null 2>&1 >>> mv -f .libs/plugin_common.lo plugin_common.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libcrammd5.la >>> -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo -lresolv >>> rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.* >>> gcc -shared cram.lo crammd5_init.lo plugin_common.lo -lresolv -lc >>> -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20 >>> (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 >>> libcrammd5.so.2) >>> (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 >>> libcrammd5.so) >>> ar cru .libs/libcrammd5.a cram.o crammd5_init.o plugin_common.o >>> ranlib .libs/libcrammd5.a >>> creating libcrammd5.la >>> (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la >>> libcrammd5.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \ >>> -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \ >>> then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \ >>> else rm -f ".deps/digestmd5.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/digestmd5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF >>> .deps/digestmd5.Tpo -c digestmd5.c -fPIC -DPIC -o .libs/digestmd5.lo >>> digestmd5.c: In function `digestmd5_server_mech_step2': >>> digestmd5.c:2093: warning: dereferencing type-punned pointer will >>> break strict-aliasing rules >>> digestmd5.c:2110: warning: dereferencing type-punned pointer will >>> break strict-aliasing rules >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF >>> .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1 >>> mv -f .libs/digestmd5.lo digestmd5.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \ >>> -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo >>> './'`digestmd5_init.c; \ >>> then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \ >>> else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/digestmd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -fPIC -DPIC -o >>> .libs/digestmd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/digestmd5_init.lo digestmd5_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libdigestmd5.la >>> -version-info 2:20:0 digestmd5.lo digestmd5_init.lo >>> plugin_common.lo -lresolv -lresolv >>> rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.* >>> gcc -shared digestmd5.lo digestmd5_init.lo plugin_common.lo >>> -lresolv -lresolv -lc -Wl,-soname -Wl,libdigestmd5.so.2 -o >>> .libs/libdigestmd5.so.2.0.20 >>> (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20 >>> libdigestmd5.so.2) >>> (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 >>> libdigestmd5.so) >>> ar cru .libs/libdigestmd5.a digestmd5.o digestmd5_init.o >>> plugin_common.o >>> ranlib .libs/libdigestmd5.a >>> creating libdigestmd5.la >>> (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la >>> libdigestmd5.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plain.lo -MD -MP -MF ".deps/plain.Tpo" \ >>> -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \ >>> then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \ >>> else rm -f ".deps/plain.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plain.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo >>> -c plain.c -fPIC -DPIC -o .libs/plain.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo >>> -c plain.c -o plain.o >/dev/null 2>&1 >>> mv -f .libs/plain.lo plain.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \ >>> -c -o plain_init.lo `test -f 'plain_init.c' || echo >>> './'`plain_init.c; \ >>> then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \ >>> else rm -f ".deps/plain_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plain_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF >>> .deps/plain_init.Tpo -c plain_init.c -fPIC -DPIC -o >>> .libs/plain_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF >>> .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1 >>> mv -f .libs/plain_init.lo plain_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libplain.la -version-info >>> 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt -lresolv >>> rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.* >>> gcc -shared plain.lo plain_init.lo plugin_common.lo -lcrypt >>> -lresolv -lc -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20 >>> (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20 >>> libplain.so.2) >>> (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so) >>> ar cru .libs/libplain.a plain.o plain_init.o plugin_common.o >>> ranlib .libs/libplain.a >>> creating libplain.la >>> (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \ >>> -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \ >>> then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \ >>> else rm -f ".deps/anonymous.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/anonymous.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF >>> .deps/anonymous.Tpo -c anonymous.c -fPIC -DPIC -o .libs/anonymous.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF >>> .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1 >>> mv -f .libs/anonymous.lo anonymous.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \ >>> -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo >>> './'`anonymous_init.c; \ >>> then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \ >>> else rm -f ".deps/anonymous_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/anonymous_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF >>> .deps/anonymous_init.Tpo -c anonymous_init.c -fPIC -DPIC -o >>> .libs/anonymous_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF >>> .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/anonymous_init.lo anonymous_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libanonymous.la >>> -version-info 2:20:0 anonymous.lo anonymous_init.lo >>> plugin_common.lo -lresolv >>> rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.* >>> gcc -shared anonymous.lo anonymous_init.lo plugin_common.lo >>> -lresolv -lc -Wl,-soname -Wl,libanonymous.so.2 -o >>> .libs/libanonymous.so.2.0.20 >>> (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20 >>> libanonymous.so.2) >>> (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 >>> libanonymous.so) >>> ar cru .libs/libanonymous.a anonymous.o anonymous_init.o >>> plugin_common.o >>> ranlib .libs/libanonymous.a >>> creating libanonymous.la >>> (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la >>> libanonymous.la) >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' >>> Making all in lib >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> auxprop.lo -MD -MP -MF ".deps/auxprop.Tpo" \ >>> -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \ >>> then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \ >>> else rm -f ".deps/auxprop.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF >>> .deps/auxprop.Tpo -c auxprop.c -fPIC -DPIC -o .libs/auxprop.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF >>> .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1 >>> mv -f .libs/auxprop.lo auxprop.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \ >>> -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \ >>> then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \ >>> else rm -f ".deps/canonusr.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/canonusr.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF >>> .deps/canonusr.Tpo -c canonusr.c -fPIC -DPIC -o .libs/canonusr.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF >>> .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1 >>> mv -f .libs/canonusr.lo canonusr.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> checkpw.lo -MD -MP -MF ".deps/checkpw.Tpo" \ >>> -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \ >>> then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \ >>> else rm -f ".deps/checkpw.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/checkpw.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF >>> .deps/checkpw.Tpo -c checkpw.c -fPIC -DPIC -o .libs/checkpw.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF >>> .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1 >>> mv -f .libs/checkpw.lo checkpw.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> client.lo -MD -MP -MF ".deps/client.Tpo" \ >>> -c -o client.lo `test -f 'client.c' || echo './'`client.c; \ >>> then mv ".deps/client.Tpo" ".deps/client.Plo"; \ >>> else rm -f ".deps/client.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/client.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo >>> -c client.c -fPIC -DPIC -o .libs/client.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo >>> -c client.c -o client.o >/dev/null 2>&1 >>> mv -f .libs/client.lo client.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> common.lo -MD -MP -MF ".deps/common.Tpo" \ >>> -c -o common.lo `test -f 'common.c' || echo './'`common.c; \ >>> then mv ".deps/common.Tpo" ".deps/common.Plo"; \ >>> else rm -f ".deps/common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo >>> -c common.c -fPIC -DPIC -o .libs/common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo >>> -c common.c -o common.o >/dev/null 2>&1 >>> mv -f .libs/common.lo common.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> config.lo -MD -MP -MF ".deps/config.Tpo" \ >>> -c -o config.lo `test -f 'config.c' || echo './'`config.c; \ >>> then mv ".deps/config.Tpo" ".deps/config.Plo"; \ >>> else rm -f ".deps/config.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/config.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo >>> -c config.c -fPIC -DPIC -o .libs/config.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo >>> -c config.c -o config.o >/dev/null 2>&1 >>> mv -f .libs/config.lo config.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> external.lo -MD -MP -MF ".deps/external.Tpo" \ >>> -c -o external.lo `test -f 'external.c' || echo './'`external.c; \ >>> then mv ".deps/external.Tpo" ".deps/external.Plo"; \ >>> else rm -f ".deps/external.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/external.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF >>> .deps/external.Tpo -c external.c -fPIC -DPIC -o .libs/external.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF >>> .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1 >>> mv -f .libs/external.lo external.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> md5.lo -MD -MP -MF ".deps/md5.Tpo" \ >>> -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \ >>> then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \ >>> else rm -f ".deps/md5.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/md5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c >>> md5.c -fPIC -DPIC -o .libs/md5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c >>> md5.c -o md5.o >/dev/null 2>&1 >>> mv -f .libs/md5.lo md5.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \ >>> -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \ >>> then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \ >>> else rm -f ".deps/saslutil.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/saslutil.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF >>> .deps/saslutil.Tpo -c saslutil.c -fPIC -DPIC -o .libs/saslutil.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF >>> .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1 >>> mv -f .libs/saslutil.lo saslutil.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> server.lo -MD -MP -MF ".deps/server.Tpo" \ >>> -c -o server.lo `test -f 'server.c' || echo './'`server.c; \ >>> then mv ".deps/server.Tpo" ".deps/server.Plo"; \ >>> else rm -f ".deps/server.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/server.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo >>> -c server.c -fPIC -DPIC -o .libs/server.lo >>> server.c: In function `sasl_setpass': >>> server.c:151: warning: dereferencing type-punned pointer will break >>> strict-aliasing rules >>> server.c: In function `sasl_server_start': >>> server.c:1245: warning: dereferencing type-punned pointer will break >>> strict-aliasing rules >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo >>> -c server.c -o server.o >/dev/null 2>&1 >>> mv -f .libs/server.lo server.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \ >>> -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \ >>> then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \ >>> else rm -f ".deps/seterror.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/seterror.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF >>> .deps/seterror.Tpo -c seterror.c -fPIC -DPIC -o .libs/seterror.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF >>> .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1 >>> mv -f .libs/seterror.lo seterror.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> dlopen.lo -MD -MP -MF ".deps/dlopen.Tpo" \ >>> -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \ >>> then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \ >>> else rm -f ".deps/dlopen.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/dlopen.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo >>> -c dlopen.c -fPIC -DPIC -o .libs/dlopen.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo >>> -c dlopen.c -o dlopen.o >/dev/null 2>&1 >>> mv -f .libs/dlopen.lo dlopen.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ >>> -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || >>> echo './'`../plugins/plugin_common.c; \ >>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -fPIC -DPIC >>> -o .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o >>> plugin_common.o >/dev/null 2>&1 >>> mv -f .libs/plugin_common.lo plugin_common.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasl2.la >>> -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo >>> checkpw.lo client.lo common.lo config.lo external.lo md5.lo >>> saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo -ldl >>> -lresolv -lresolv >>> rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.* >>> gcc -shared auxprop.lo canonusr.lo checkpw.lo client.lo common.lo >>> config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo >>> dlopen.lo plugin_common.lo -ldl -lresolv -lresolv -lc -Wl,-soname >>> -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20 >>> (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20 >>> libsasl2.so.2) >>> (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so) >>> ar cru .libs/libsasl2.a auxprop.o canonusr.o checkpw.o client.o >>> common.o config.o external.o md5.o saslutil.o server.o seterror.o >>> dlopen.o plugin_common.o >>> ranlib .libs/libsasl2.a >>> creating libsasl2.la >>> (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la) >>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF >>> ".deps/../plugins/sasldb.Tpo" \ >>> -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo >>> './'`../plugins/sasldb.c; \ >>> then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po"; \ >>> else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \ >>> fi >>> ../plugins/sasldb.c:129: fatal error: opening dependency file >>> .deps/../plugins/sasldb.Tpo: No such file or directory >>> compilation terminated. >>> make[2]: *** [../plugins/sasldb.o] Error 1 >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >>> make: *** [all] Error 2 >>> [root@genie cyrus-sasl-2.1.20]# >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users(a)redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> >> >> >> >> ------------------------------------------------------------------------ >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users(a)redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> >> > > ------------------------------------------------------------------------ > > -- > Fedora-directory-users mailing list > Fedora-directory-users(a)redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users > > -- Fedora-directory-users mailing list Fedora-directory-users(a)redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users