Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux workstation (built manually, not from RPM). After running the setup script to install it, everything appears to be working, except I can't login to the admin console. I can connect to the server via the web browser on my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any hosts or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found? Doesn't it always exist? Yes, I used the default name for this user when I ran setup.
Any input would be appreciated!
Thanks, Mike
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm completely stuck.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux workstation (built manually, not from RPM). After running the setup script to install it, everything appears to be working, except I can't login to the admin console. I can connect to the server via the web browser on my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any hosts or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found? Doesn't it always exist? Yes, I used the default name for this user when I ran setup.
Any input would be appreciated!
Thanks, Mike
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Mike Mueller wrote:
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm completely stuck.
Check the access log for the DS from around the time of the console login attempt. You should see a BIND dn="cn=directory manager" followed by the result of that operation.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux
workstation
(built manually, not from RPM). After running the setup script to install it, everything appears to be working, except I can't
login to
the admin console. I can connect to the server via the web
browser on
my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any
hosts
or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found? Doesn't it always exist? Yes, I used the default name for this user when I ran setup.
Any input would be appreciated!
Thanks, Mike
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
On 1/2/07, Richard Megginson rmeggins@redhat.com wrote:
Mike Mueller wrote:
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm completely stuck.
Check the access log for the DS from around the time of the console login attempt. You should see a BIND dn="cn=directory manager" followed by the result of that operation.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux
workstation
(built manually, not from RPM). After running the setup script to install it, everything appears to be working, except I can't
login to
the admin console. I can connect to the server via the web
browser on
my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any
hosts
or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found? Doesn't it always exist? Yes, I used the default name for this user when I ran setup.
Any input would be appreciated!
Thanks, Mike
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Nothing at all appears in the slapd access or error logs.
Mike Mueller wrote:
On 1/2/07, Richard Megginson rmeggins@redhat.com wrote:
Mike Mueller wrote:
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm completely stuck.
Check the access log for the DS from around the time of the console login attempt. You should see a BIND dn="cn=directory manager" followed by the result of that operation.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux
workstation
(built manually, not from RPM). After running the setup
script to
install it, everything appears to be working, except I can't
login to
the admin console. I can connect to the server via the web
browser on
my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any
hosts
or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found?
Doesn't it
always exist? Yes, I used the default name for this user when
I ran
setup.
Any input would be appreciated!
Thanks, Mike
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Nothing at all appears in the slapd access or error logs.
Hmm - check shared/config/dbswitch.conf and make sure it points to the correct ds host and port.
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Can you just try adding your IP to the /etc/hosts file?
Bart
On 1/2/07, Mike Mueller mike@subfocal.net wrote:
On 1/2/07, Richard Megginson rmeggins@redhat.com wrote:
Mike Mueller wrote:
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm completely stuck.
Check the access log for the DS from around the time of the console login attempt. You should see a BIND dn="cn=directory manager" followed by the result of that operation.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux
workstation
(built manually, not from RPM). After running the setup script to install it, everything appears to be working, except I can't
login to
the admin console. I can connect to the server via the web
browser on
my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any
hosts
or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not found? Doesn't it always exist? Yes, I used the default name for this user when I ran setup.
Any input would be appreciated!
Thanks, Mike
I had trouble logging into the admin console on a RHEL server as well. My resolution; install 64-bit java.
-----Original Message----- From: fedora-directory-users-bounces@redhat.com [mailto:fedora-directory-users-bounces@redhat.com] On Behalf Of Richard Megginson Sent: Tuesday, January 02, 2007 2:01 PM To: General discussion list for the Fedora Directory server project. Subject: Re: [Fedora-directory-users] Can't connect to admin serveras Directory Manager
Mike Mueller wrote:
I hate to do this, but I'd really appreciate it if someone has any thoughs about my problem using the GUI admin console. I'm
completely
stuck.
Check the access log for the DS from around the time of the console login attempt. You should see a BIND dn="cn=directory manager" followed by the result of that operation.
(In other words, "bump")
Mike
On 12/24/06, Bob Rossi ihateuninterruptiblesleep@gmail.com wrote:
Could it be uninterruptible sleep? Just think about it.
On Sat, Dec 23, 2006 at 05:18:42AM -0500, Mike Mueller wrote:
I just did a fresh install of FDS 1.0.4 on a Gentoo Linux
workstation
(built manually, not from RPM). After running the
setup script
to install it, everything appears to be working, except I can't
login to
the admin console. I can connect to the server via the web
browser on
my admin port (9419) and authenticate fine there.
However, when I start the console up, I do:
User ID: cn=Directory Manager Password: <my password> Administration URL: http://hostname.domain.com:9419/
The dialog that I get says:
"Cannot logon because of an incorrect User ID,
Incorrect password
or Directory problem.
HttpException Response: HTTP/1.1 401 Authorization Required Status: 401 URL: http://hostname.domain.com:9419/admin-serv/authenticate"
I made sure that the admin server isn't configured to block any
hosts
or IP addresses (set them both to '*' in the local.conf file).
Here's what the error log says:
[Sat Dec 23 05:09:46 2006] [notice] [client 192.168.2.1] admserv_host_ip_check: ap_get_remote_host could not resolve 192.168.2.1 [Sat Dec 23 05:09:46 2006] [error] [client 192.168.2.1] user cn=Directory Manager not found: /admin-serv/authenticate
How could the "cn=Directory Manager" user be not
found? Doesn't
it always exist? Yes, I used the default name for
this user when
I ran setup.
Any input would be appreciated!
Thanks, Mike
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
389-users@lists.fedoraproject.org
-
Bart Schelstraete -
Bob Rossi -
Diana Shepard -
Mike Mueller -
Rich Megginson