It would be nice if the install script gave a progress status. How long
has it been running and how much longer until done.
Granted it has only been 10 min so far this time, but it would be great
to know when I can switch over to other things....
> Using serial port. The Hieroglyphics regularly occur on output.
What serial rate and terminal program do you use? I see it
occasionally but find screen is usually pretty decent "screen
> No network available had to create ifcfg-eth0 and ifup eth0 to start
> network. Note not using IPV6 on router.
We've seen that randomly but it's intermittently and still being investigated.
> Did not resize partition!
Known issue, we've seen an intermittent issue with finding rootfs that
is believed could be to do with the growing of the partition so we've
disabled it for the moment to see if we can get some data either way.
> First IP address given by router running openwrt and dnsmasq version 2.62.
> root@router:~# cat /var/dhcp.leases
> 1406708192 f6:6b:6e:a3:63:57 192.168.53.53 ct1
> After reboot
> root@router:~# cat /var/dhcp.leases
> 1406710000 be:bd:3e:5e:af:bd 192.168.53.59 ct1
> 1406708192 f6:6b:6e:a3:63:57 192.168.53.53 *
> [root@ct1 ~]# ip link
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
> DEFAULT group default
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether be:bd:3e:5e:af:bd brd ff:ff:ff:ff:ff:ff
I'm not sure the CT has a fixed MAC address or serial number in which
to derive one
> Attached dmesg.txt.
> Any assistance would be welcome.
> On another cubietruck I performed
> yum update - this showed no updates available, even though the mirrors
> were showing updates.
Not sure on that one.
> contents of /boot/extlinux/extlinux.conf
> label Fedora (3.16.0-0.rc5.git0.1.fc22.armv7hl) 22 (Rawhide)
> kernel /vmlinuz-3.16.0-0.rc5.git0.1.fc22.armv7hl
> append ro root=UUID=47984fd6-5fcb-4547-94be-3fa261beaa75
> console=ttyS0,115200 console=tty0 LANG=en_US.UTF-8
> fdtdir /dtb-3.16.0-0.rc4.git3.1.fc22.armv7hl/
> initrd /initramfs-3.16.0-0.rc5.git0.1.fc22.armv7hl.img
> Note the fdtdir should be fdtdir /dtb-3.16.0-0.rc6.git0.1.fc22.1.armv7hl
That's a known blocker bug https://bugzilla.redhat.com/show_bug.cgi?id=1088933
Hello Fedora ARM hackers,
I'm shopping around for a device to provide basic routing and firewall
The goal is to provide remote access to an IP camera through satellite
internet connection. To keep the camera and link from getting buried or
abused, I want to limit access to connections from a particular /25. If
using a dynamic IP, the satellite modem uses NAT and does not offer
firewall or port forwarding capability. If using a static IP, a public IP
is routed directly to the inside device, without a firewall.
I'm thinking a small multipurpose ARM device would be a cost effective
solution. Any problems that can't be resolved via ssh will be dealt with
by post or remote hands, so it must be fairly reliable, not require user
intervention to survive power cycles, etc. I'd like a dual Ethernet
device, but a USB nic could do. There will need to be a case or finished
chassis of some sort, preferably one that could protect that second NIC
from accidental disconnection or tampering.
Is there anything on the market that fits the bill, or am I better off with
some OpenWRT supported consumer router, or maybe something else?
On Jul 22, 2014 9:13 AM, "Peter Robinson" <pbrobinson(a)gmail.com> wrote:
> > On Jul 22, 2014 2:29 AM, "Peter Robinson" <pbrobinson(a)gmail.com> wrote:
> >> Probably the closest to your needs at the moment will be the Utilite
> >>  as it has models with dual NICs and a case. At the moment the
> >> support in Fedora is basic but I'm working to improve that before the
> >> release of F-21.
> >> Peter
> >>  http://utilite-computer.com/web/utilite-models
> > This has all the hardware bits I need, thanks Peter.
> > How basic are we talking? Reliably functional networking and ssh ( and
> > maybe dhcpd ) would be enough. Python would be nice too; I suspect I'll
> > up doing more than one of these deployments, and look for excuses to use
> > ansible.
> From the userspace is has everything every other ARMv7 device has.
> I was meaning in terms of HW. Currently it supports serial console,
> one NIC, mmc and SATA. I plan on expanding and improving this in the
> coming weeks.
(Oops, missed the list...)
One nic is a deal breaker, but presumably whatever comes with the thing
will operate both.
Although, you'll probably be faster than the hoops I have to jump through
to buy all this stuff. Thanks for working on it :)