April 2018 - arm - Fedora Mailing-Lists

[RaspberryPI 3B] [unicorn Hat] [how to configure spi]

by Pierre-Francois RENARD

Hello I am running raspberry pi3B and with lastest fedora 28 (with kernel 4.16.0-300.fc28.aarch64) I read from the unicorn Hat that I need to activate SPI using raspi-config ( for raspbian only) So I tried to do it manually .. and that's when everything did not go so well :) I understood that I have to tune /boot/efi/config.txt file adding device_tree_param=spi=on I guess I have also to add a dtoverlay line but I don't which one ... Thanks

5 years, 8 months

6
28
0 / 0

aarch64 copr?

by Avi Kivity

Hello, What are the prospects for getting aarch64 copr? Copr is very useful for bringing bleeding edge Fedora packages to CentOS/RHEL users.

5 years, 10 months

3
3
3 / 0

Re: RPI 3b+ Support ?

by Ludovic Hirlimann - wargame

https://dl.fedoraproject.org/pub/alt/stage/28_RC-1.1/Server/aarch64/image... ----- Mail original ----- > De: "Peter Robinson" <pbrobinson(a)gmail.com> > À: "Ludovic Hirlimann - wargame" <debellum(a)free.fr> > Envoyé: Lundi 30 Avril 2018 15:51:19 > Objet: Re: [fedora-arm] Re: RPI 3b+ Support ? > > On Mon, Apr 30, 2018 at 2:48 PM, Ludovic Hirlimann - wargame > <debellum(a)free.fr> wrote: > >> > black with no more green light blinking. > >> > >> By selection menu you mean grub? How are you connected? Via HDMI? > >> If > >> so do you get the penguins? > > > > Yes Grub - I use HDMI yes + mouse and French keyboard. > > > > I don't see pinguins. > > What was the file name of the image you used? > > You'd normally get some output until the vc4 driver loaded, it > wouldn't usually go straight blank. > > > Ludo > > ps any debuging I can turn on to get logs for you guys ? >

5 years, 12 months

1
0
0 / 0

RPI 3b+ Support ?

by Ludovic Hirlimann - wargame

Hi, I've finally had some time today to toy with my RPI 3b+. I wanted to install fedora-server on it and followed the instructions at https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi#Supported_H... (using the aarch64 images). I get the rainbow screen. To rule out the SD card and the power supply I've just installed Rasbpian and it worked. How can I gather and provide useful information for the project or me to understand why it's not working out of the box. Shall I try to use beta 28 from https://dl.fedoraproject.org/pub/fedora/linux/releases/test/28_Beta/Serve... Or Should I just run rawhide (which was my plan once I had and idea how things work in a stable env). Ludo

5 years, 12 months

2
7
0 / 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting

by pwhalen＠redhat.com

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2018-05-01 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.o... Source: https://apps.fedoraproject.org/calendar/meeting/9202/

5 years, 12 months

1
0
0 / 0

fedora 27 on inet 3f tablet with newer kernel from repo does not boot anymore

by Steven Vanden Branden

hello all, i have a inet 3f tablet (pov protab 255xxl) and managed to get fedora 27 running on the board with a inet1 dtb, The kernel from the initial image boots and everything (except for the touchscreen) works. this is version 4.13.3-300.fc27.amv7hl, i also installed version 4.13.9-300.fc27.amv7hl, and these also work fine, Then i updated to the latest fedora 27 kernel 4.15.15-300.fc27.armv7hl and this kernel starts booting, but then the screen goes blank, and i cannot login via ssh either, the same happened with a self compiled kernel 4.17.0-0.rc0.git0.300.fc27.armv7hl with lima drivers patched. I have tried to find the serial port pins on the board, but could not locate them, also kernel versions 4.14 i have not tried yet because i cannot find them precompiled. Are there any parameters i can change to try to make it boot, or get more output in the process? Or a link to documentation :) greetings, Steven

6 years

4
10
0 / 0

NanoPi Neo2, Rawhide-20180330: (probably) hangs in initial-setup

by Tomasz Kłoczko

Hi, Whole boot process is OK until: [ OK ] Mounted /boot. Mounting /boot/efi... [ OK ] Mounted /boot/efi. [ OK ] Reached target Local File Systems. Starting Restore /run/initramfs on shutdown... Starting Import network configuration from initramfs... Starting Rebuild Journal Catalog... Starting Rebuild Dynamic Linker Cache... Starting Tell Plymouth To Write Out Runtime Data... [ OK [ 39.871989] audit: type=1130 audit(1520306229.519:93): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown c' ] Started Restore /run/initramfs on shutdown. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Import network configuration from initramfs. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... Starting Create Volatile Files and Directories... [ OK ] Started Update is Completed. [ OK ] Started Create Volatile Files and Directories. Starting Security Auditing Service... [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on SSSD Secrets Service responder socket. [ OK ] Started dnf makecache timer. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Login Service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Initial Setup configuration program... [ OK ] Started Secure Boot DBX (blacklist) updater. Starting NTP client/server... [ OK ] Reached target sshd-keygen.target. Starting firewalld - dynamic firewall daemon... On some boots is displayed FAIL on NTP and firewalld services but except this nothing more happens. Suggestions/comments? kloczek -- Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH

6 years

2
8
0 / 0

Re: Raspberry Pi 3

by Chris Hall

Peter sorry for the confusion and thank you for the prompt reply Re rpi-3-b-plus. in your reply to Fri, Mar 23, 2018 at 11:28 AM, Tomáš Frolík you wrote. "Once it's running if you update the kernel to rc6 you should be running just fine. One other thing to note is there's some different bits needed for the wifi. I'm going to put all of those, inc the one needed for the original Pi3, into an rpm but I've not had a chance to do that as yet. Give me a day or so and I'll likely get that done." This is what I was enquiring about. I have fedora 28 beta running on a Raspberry pi 3B+ all good but no wifi. Regards Chris Hall

6 years

2
2
0 / 0

Custom image from kickstart

by James Szinger

Hi, I've become used to using kickstart files to automate my Fedora installs to VMs and bare-metal x86 hardware. I'm getting started with Fedora on ARM and am wondering if there is something similar to create custom disk images. The closest I've found is the page on creating ARM remixes: <https://fedoraproject.org/wiki/Architectures/ARM/Creating_Remixes>. Is that still the way to go, or is there a better approach? Thanks, Jim

6 years

3
7
0 / 0

Urgent testing request: Raspberry Pi 3 owners

by Adam Williamson

Hi folks! It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final: https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware) like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release. If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3 and feedback for the kernel build to this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1570983 that'd be awesome. Thanks a lot, folks! -- Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net

6 years

3
4
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm April 2018