December 2019 - arm - Fedora Mailing-Lists

The server images are not working with Fedora 31

by Peter Hjalmarsson

Hi, Just wanted to point out that due to U-Boot not supporting XFS, and Fedora Server has moved to a XFS /boot, the current images as https://dl.fedoraproject.org/pub/fedora/linux/releases/31/Server/aarch64/... does not boot on any system using U-Boot, like for example the raspberry pi. Best Regards, Peter Hjalmarsson

3 years, 3 months

3
5
0 / 0

How to help supporting a new Arm device

by Alexander Shopov

Hi all, I have the following device: DIY Laptop by Olimex https://www.olimex.com/Products/DIY-Laptop/ It is a 2GB A64 Cortex A53 Quad core 64-bit processor based. https://www.olimex.com/Products/DIY-Laptop/SPARE-PARTS/TERES-PCB1-A64/ope... There are several options for running Linux on it, but Fedora is not among them https://github.com/OLIMEX/DIY-LAPTOP/tree/master/SOFTWARE/A64-TERES I did not manage to run the latest stable Fedora on it. How can I help with getting Fedora on this laptop? Is there a how-to for getting this to run? Kind regards: al_shopov

3 years, 8 months

3
4
0 / 0

[RPI3B+ & Ethernet On Board Card]

by RENARD Pierre-Francois

Hello all, I am running Fedora 31, aarch64 release on many Raspberry PI 3B+. I have exactly the same behaviour with all the RPIs. When trying to access a NFS server ( perfectly working with my laptops running fedora X86) with a ls command when a huge transfer is on going, I have a lot of "NFS server not responding" in journal and ls is hanged. I tried to replace the onboard ethernet card with a USB 1GB ethernet and I don't have this issue at all. I also tried to change port on the switch with the same result ( not working with on board card, working with USB one) I also had such network issue with Fedora 30. Are you aware of such a behavior, if not I will open an issue. Thanks Fox

3 years, 10 months

3
13
0 / 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting

by pwhalen＠redhat.com

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2019-12-31 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.o... Source: https://apps.fedoraproject.org/calendar/meeting/9431/

3 years, 11 months

2
1
0 / 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting

by pwhalen＠redhat.com

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2019-12-24 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.o... Source: https://apps.fedoraproject.org/calendar/meeting/9431/

3 years, 11 months

1
0
0 / 0

Fedora on Khadas VIM3 Pro

by Ole Dalgaard

Hello I have been trying to boot Fedora on a Khadas VIM3 Pro board. It is now booting Fedora 31 with version 5.4.2 kernel. To make it run the following changes was needed: 1. Mainline u-boot compiled after the recipe at https://gitlab.denx.de/u-boot/u-boot/blob/master/board/amlogic/w400/READM... - whether the fedora provided one also works I do not know. The recipe says that some firmwares are needed for the board. Beyond the recipe, I have added a couple of patches from the fedora u-boot, to find the right file to boot. 2. The U-boot is too large (1.1M) to fit in before the first FAT partition starts. So I added some more space before to not destroy the beginning of the FAT partition. 3. The fedora kernel has CONFIG_PWM_MESON=m instead of CONFIG_PWM_MESON=y. This causes an other clock setup than intended, so a needed clock is stopped, unless clk_ignore_unused is added as kernel boot parameter. Using clk_ignore_unused it boots, but cpufreq and others are not setup correct. CONFIG_PWM_MESON=y is the preferred fix for now. I would like some input on how to include this in Fedora? BR Ole

3 years, 11 months

1
0
0 / 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting

by pwhalen＠redhat.com

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2019-12-17 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.o... Source: https://apps.fedoraproject.org/calendar/meeting/9431/

3 years, 11 months

1
0
0 / 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting

by pwhalen＠redhat.com

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2019-12-10 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.o... Source: https://apps.fedoraproject.org/calendar/meeting/9431/

3 years, 11 months

1
0
0 / 0

RPi senseHAT compatability?

by adam SP

Hi there, I’ve recently been trying to get Fedora working with the RPi’s sense expansion hat but have run into some issues. My first instinct was to play around with device tree overlays using /boot/efi/config.txt but have had no luck. I was wondering if anyone here has any insights into device tree overlays for the RPi that could help me out. Thanks, Adam E.

3 years, 12 months

2
1
0 / 0

Re: Boot issues with Sugar On A Stick

by Peter Robinson

Please leave the Arm list on the replies. My name is Peter. I've emailed the sugar list to see if they're aware of the F-31 problem and asked them to resolve it if so. Peter > Hi Paul - Thank you very much for the suggestion to move to the 31 pre-release. It is getting us much closer, but not all the way there yet. > With the 31 pre-release, installed following the same directions as earlier in this thread, the system boots up, asks for an Admin name and password, user name and password, finishes configuration, then goes to the login page. Upon entering the login information, the system reboots itself. :/ So close! > > Does there happen to be a stable 29 release for the Pi 3b+ ? I could not find it in numerous searches today. > > Thanks again, > > Garry Wakely > > > On Wed, Oct 16, 2019 at 5:48 PM Peter Robinson <pbrobinson(a)gmail.com> wrote: >> >> Adding back Arm list. >> >> On Wed, Oct 16, 2019 at 8:01 PM Garry Wakely <bristolgarry(a)gmail.com> wrote: >> > >> > Hi Peter - It is the Fedora-SoaS-armhfp-30-1.2-sda version downloaded this morning from here: https://arm.fedoraproject.org/ >> > It was installed according to the directions here: https://docs.fedoraproject.org/en-US/fedora/f30/install-guide/install/Pre... >> > and installed using the Fedora Media Writer. >> >> There was a known issue with the F-30 release. I would give one of the >> F-31 pre-releases out as I believe they should be much better. >> >> >> >> >> > Hi Folks - I am trying to set up Sugar On A Stick for Raspberry Pi 3+, but am running into a boot issue. The boot process runs properly until it gets to "Reached Target Basic System", and then it hangs at >> >> > "A start job is running for dev/dis...1fe03C48" at which point there is no further progress. Has anyone else had a problem like this, and if so, what is your workaround/solution? >> >> >> >> What release?

3 years, 12 months

3
3
0 / 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm December 2019