El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
Hi Dennis,
I have been doing the same process as you with the exception that I
change the UUIDs in extlinux.conf and /etc/fstab. The other thing I
do, because I change update the UUIDs, is create a new initramfs. I
will try again later without creating a new initramfs to see if I can
get to where you are. BTW, I also am trying to load the Mate spin,
not the server release.
Can you try an experiment for me? Can you try to upgrade your system
doing a "dnf -y update" command. The reboot to ensure it reboots
with the new kernel? By doing the dnf upgrade, you will force the
system to use dracut to create a new initramfs image. Let's see if
this now works. This is essentially where the system began failing
after f24. We need some confidence that the upgrade process is not
going to kill our path forward.
I plugged in a usb2 ethernet adapter and updated the system and it came
back fine, however I had to use a usb2 ethernet adapater in the usb2
port as it seems the usb3 port is not working, the ethernet onboard is
wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
Thanks.
Stewart
On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
--
Hello Dennis,
that looks beautiful. You have a running Odroid-XU4 with actual
Kernel
with Fedora 26 !!
How did you manage it? I haven't so much luck with the
installation.
Thanks
Andreas
I ran
xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran xfs_growfs
so it
filled the sd card
I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd and
unlock the root account as initial-setup is not running.
of couse /dev/sdb was my sdcard, make sure you have the right
device
for yours. It does seem that the nic is not detected however.
Dennis
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org