EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.3.7-301.fc31.aarch64 (mockbuild@buildvm-aarch64-02.arm.fedoraproject.org) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Mon Oct 21 19:03:54 UTC 2019 [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.80 by Das U-Boot [ 0.000000] efi: SMBIOS=0x3cb43000 MEMRESERVE=0x3c8d8040 [ 0.000000] cma: Reserved 64 MiB at 0x0000000038000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x3dd8e780-0x3dd9bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000000fff] [ 0.000000] node 0: [mem 0x0000000000001000-0x000000003cb3afff] [ 0.000000] node 0: [mem 0x000000003cb3b000-0x000000003cb41fff] [ 0.000000] node 0: [mem 0x000000003cb42000-0x000000003cb42fff] [ 0.000000] node 0: [mem 0x000000003cb43000-0x000000003cb43fff] [ 0.000000] node 0: [mem 0x000000003cb44000-0x000000003cb45fff] [ 0.000000] node 0: [mem 0x000000003cb46000-0x000000003cb4afff] [ 0.000000] node 0: [mem 0x000000003cb4b000-0x000000003cb4cfff] [ 0.000000] node 0: [mem 0x000000003cb4d000-0x000000003cb4dfff] [ 0.000000] node 0: [mem 0x000000003cb4e000-0x000000003df4ffff] [ 0.000000] node 0: [mem 0x000000003df50000-0x000000003df5ffff] [ 0.000000] node 0: [mem 0x000000003df60000-0x000000003dffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 30 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] percpu: Embedded 30 pages/cpu s83288 r8192 d31400 u122880 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 249984 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.3.7-301.fc31.aarch64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 831968K/1015808K available (11516K kernel code, 2110K rwdata, 5296K rodata, 6272K init, 942K bss, 118304K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x38/0x258 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 42542 entries in 167 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000367] Console: colour dummy device 80x25 [ 0.000536] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000551] pid_max: default: 32768 minimum: 301 [ 0.000751] LSM: Security Framework initializing [ 0.000816] Yama: becoming mindful. [ 0.000858] SELinux: Initializing. [ 0.001004] *** VALIDATE SELinux *** [ 0.001114] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001143] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002060] *** VALIDATE proc *** [ 0.002420] *** VALIDATE cgroup1 *** [ 0.002433] *** VALIDATE cgroup2 *** [ 0.003785] ASID allocator initialised with 32768 entries [ 0.003942] rcu: Hierarchical SRCU implementation. [ 0.007516] Remapping and enabling EFI services. [ 0.008231] smp: Bringing up secondary CPUs ... [ 0.009028] Detected VIPT I-cache on CPU1 [ 0.009100] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.010095] Detected VIPT I-cache on CPU2 [ 0.010144] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.011000] Detected VIPT I-cache on CPU3 [ 0.011044] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.011201] smp: Brought up 1 node, 4 CPUs [ 0.011229] SMP: Total of 4 processors activated. [ 0.011239] CPU features: detected: 32-bit EL0 Support [ 0.011250] CPU features: detected: CRC32 instructions [ 0.015795] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.015806] CPU: All CPU(s) started at EL2 [ 0.015843] alternatives: patching kernel code [ 0.018723] devtmpfs: initialized [ 0.028642] Registered cp15_barrier emulation handler [ 0.028665] Registered setend emulation handler [ 0.029163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.029191] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033616] pinctrl core: initialized pinctrl subsystem [ 0.035150] SMBIOS 3.0 present. [ 0.035175] DMI: raspberrypi rpi/rpi, BIOS 2019.10 10/09/2019 [ 0.036209] NET: Registered protocol family 16 [ 0.038860] audit: initializing netlink subsys (disabled) [ 0.039132] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.040880] cpuidle: using governor menu [ 0.041224] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.050235] DMA: preallocated 256 KiB pool for atomic allocations [ 0.051052] Serial: AMBA PL011 UART driver [ 0.075742] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.075760] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.075770] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.075780] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.197157] cryptd: max_cpu_qlen set to 1000 [ 1.209418] alg: No test for lzo-rle (lzo-rle-generic) [ 1.209799] alg: No test for lzo-rle (lzo-rle-scomp) [ 1.210157] alg: No test for 842 (842-generic) [ 1.210477] alg: No test for 842 (842-scomp) [ 1.233345] ACPI: Interpreter disabled. [ 1.235080] vgaarb: loaded [ 1.235953] SCSI subsystem initialized [ 1.236509] usbcore: registered new interface driver usbfs [ 1.236571] usbcore: registered new interface driver hub [ 1.236680] usbcore: registered new device driver usb [ 1.237045] pps_core: LinuxPPS API ver. 1 registered [ 1.237053] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.237079] PTP clock support registered [ 1.237395] EDAC MC: Ver: 3.0.0 [ 1.238201] Registered efivars operations [ 1.239519] NetLabel: Initializing [ 1.239530] NetLabel: domain hash size = 128 [ 1.239536] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.239633] NetLabel: unlabeled traffic allowed by default [ 1.240279] clocksource: Switched to clocksource arch_sys_counter [ 1.371304] VFS: Disk quotas dquot_6.6.0 [ 1.371410] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.371570] *** VALIDATE hugetlbfs *** [ 1.372091] simple-framebuffer 3e8fa000.framebuffer: framebuffer at 0x3e8fa000, 0x300000 bytes, mapped to 0x(____ptrval____) [ 1.372108] simple-framebuffer 3e8fa000.framebuffer: format=a8r8g8b8, mode=1024x768x32, linelength=4096 [ 1.372418] fbcon: Deferring console take-over [ 1.372432] simple-framebuffer 3e8fa000.framebuffer: fb0: simplefb registered! [ 1.373152] simple-framebuffer 3ea7a000.framebuffer: framebuffer at 0x3ea7a000, 0x180000 bytes, mapped to 0x(____ptrval____) [ 1.373168] simple-framebuffer 3ea7a000.framebuffer: format=r5g6b5, mode=1024x768x16, linelength=2048 [ 1.373438] fbcon: Deferring console take-over [ 1.373451] simple-framebuffer 3ea7a000.framebuffer: fb1: simplefb registered! [ 1.373529] pnp: PnP ACPI: disabled [ 1.383566] thermal_sys: Registered thermal governor 'fair_share' [ 1.383571] thermal_sys: Registered thermal governor 'step_wise' [ 1.383583] thermal_sys: Registered thermal governor 'user_space' [ 1.384279] NET: Registered protocol family 2 [ 1.385085] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.385126] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.385243] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.385440] TCP: Hash tables configured (established 8192 bind 8192) [ 1.385685] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.385734] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.386003] NET: Registered protocol family 1 [ 1.386037] NET: Registered protocol family 44 [ 1.386055] PCI: CLS 0 bytes, default 64 [ 1.386344] Trying to unpack rootfs image as initramfs... [ 6.326000] Freeing initrd memory: 70580K [ 6.326983] kvm [1]: IPA Size Limit: 40bits [ 6.328417] kvm [1]: Hyp mode initialized successfully [ 6.658355] Initialise system trusted keyrings [ 6.658433] Key type blacklist registered [ 6.658709] workingset: timestamp_bits=37 max_order=18 bucket_order=0 [ 6.669304] zbud: loaded [ 6.708873] NET: Registered protocol family 38 [ 6.708902] Key type asymmetric registered [ 6.708911] Asymmetric key parser 'x509' registered [ 6.708998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 6.709265] io scheduler mq-deadline registered [ 6.709275] io scheduler kyber registered [ 6.709558] io scheduler bfq registered [ 6.709915] atomic64_test: passed [ 6.717749] efifb: probing for efifb [ 6.717865] efifb: No BGRT, not showing boot graphics [ 6.717874] efifb: framebuffer at 0x3e8fa000, using 3072k, total 3072k [ 6.717884] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 6.717890] efifb: scrolling: redraw [ 6.717901] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 6.717950] fb0: switching to EFI VGA from simple [ 6.718269] fb1: switching to EFI VGA from simple [ 6.718679] fbcon: Deferring console take-over [ 6.718688] fb0: EFI VGA frame buffer device [ 6.728747] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.740066] printk: console [ttyS0] disabled [ 6.740166] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550 [ 7.757355] printk: console [ttyS0] enabled [ 7.763185] msm_serial: driver initialized [ 7.769356] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 7.776494] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 7.785477] libphy: Fixed MDIO Bus: probed [ 7.790314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.796949] ehci-pci: EHCI PCI platform driver [ 7.801543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.808004] usbcore: registered new interface driver usbserial_generic [ 7.814676] usbserial: USB Serial support registered for generic [ 7.820999] mousedev: PS/2 mouse device common for all mice [ 7.829145] device-mapper: uevent: version 1.0.3 [ 7.834304] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 7.843817] ledtrig-cpu: registered to indicate activity on CPUs [ 7.850664] EFI Variables Facility v0.08 2004-May-17 [ 7.855757] efivars: get_next_variable: status=8000000000000003 [ 7.862252] hidraw: raw HID events driver (C) Jiri Kosina [ 7.867996] usbcore: registered new interface driver usbhid [ 7.873662] usbhid: USB HID core driver [ 7.877852] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 7.884520] drop_monitor: Initializing network drop monitor service [ 7.891202] Initializing XFRM netlink socket [ 7.896490] NET: Registered protocol family 10 [ 7.961217] Segment Routing with IPv6 [ 7.965072] mip6: Mobile IPv6 [ 7.968084] NET: Registered protocol family 17 [ 7.973965] registered taskstats version 1 [ 7.978166] Loading compiled-in X.509 certificates [ 8.252923] Loaded X.509 cert 'Fedora kernel signing key: 8d526677ef9b455c0789749a6b3f7d23ea4a0d36' [ 8.262324] zswap: loaded using pool lzo/zbud [ 8.299805] Key type big_key registered [ 8.332253] Key type encrypted registered [ 8.336369] ima: No TPM chip found, activating TPM-bypass! [ 8.341998] ima: Allocated hash algorithm: sha256 [ 8.346807] No architecture policies found [ 8.357850] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2 [ 8.369152] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-09-30 14:42 [ 8.378345] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1400000000 [ 8.391195] hctosys: unable to open rtc device (rtc0) [ 8.410932] Freeing unused kernel memory: 6272K [ 8.477644] Checked W+X mappings: passed, no W+X pages found [ 8.483433] rodata_test: all tests were successful [ 8.488301] Run /init as init process [ 8.531954] systemd[1]: System time before build time, advancing clock. [ 8.548433] efivars: get_next_variable: status=8000000000000003 [ 8.558741] systemd[1]: systemd v243-4.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 ) [ 8.583393] systemd[1]: Detected architecture arm64. [ 8.588446] systemd[1]: Running in initial RAM disk. Welcome to Fedora 31 (Server Edition) dracut-049-27.git20181204.fc31.1 (Initramfs)! [ 8.630427] systemd[1]: No hostname configured. [ 8.635053] systemd[1]: Set hostname to . [ 8.640332] random: systemd: uninitialized urandom read (16 bytes read) [ 8.647074] systemd[1]: Initializing machine ID from random generator. [ 9.092813] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 9.116300] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. [ 9.187193] random: systemd: uninitialized urandom read (16 bytes read) [ 9.194028] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 9.230622] random: systemd: uninitialized urandom read (16 bytes read) [ 9.237397] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ OK ] Reached target Timers. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Starting Create list of st…odes for the current kernel... Starting Journal Service... Starting Load Kernel Modules... Starting Setup Virtual Console... [ 9.594223] Asymmetric key parser 'pkcs8' registered [ OK ] Started Create list of sta… nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. Starting dracut ask for additional cmdline parameters... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started dracut ask for additional cmdline parameters. Starting dracut cmdline hook... [ OK ] Started Journal Service. [ 10.731123] audit: type=1130 audit(1570712163.189:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.822839] Loading iSCSI transport class v2.0-870. [ 10.880488] iscsi: registered transport (tcp) [ 11.005937] iscsi: registered transport (qla4xxx) [ 11.010841] QLogic iSCSI HBA Driver [ 11.051152] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 11.141543] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) [ 11.147766] iscsi: registered transport (cxgb3i) [ 11.310541] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 11.317029] iscsi: registered transport (cxgb4i) [ 11.321767] cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled. [ 11.365750] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 11.396162] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 11.403422] iscsi: registered transport (bnx2i) [ 11.453427] iscsi: registered transport (be2iscsi) [ 11.458299] In beiscsi_module_init, tt=(____ptrval____) [ OK ] Started dracut cmdline hook. [ 11.620657] audit: type=1130 audit(1570712164.079:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting dracut pre-udev hook... [ 11.900449] RPC: Registered named UNIX socket transport module. [ 11.906465] RPC: Registered udp transport module. [ 11.911285] RPC: Registered tcp transport module. [ 11.916054] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.652467] alua: device handler registered [ 12.682932] emc: device handler registered [ 12.713728] rdac: device handler registered [ OK ] Started dracut pre-udev hook. [ 12.850700] audit: type=1130 audit(1570712165.309:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ 14.101023] audit: type=1130 audit(1570712166.559:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting dracut pre-trigger hook... [ OK ] Started dracut pre-trigger hook. [ 14.780643] audit: type=1130 audit(1570712167.239:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. [ 15.331055] audit: type=1130 audit(1570712167.789:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Mounting Kernel Configuration File System... Starting dracut initqueue hook... [ 15.407058] usb_phy_generic phy: phy supply vcc not found, using dummy regulator Startin[ 15.427871] random: fast init done g Show Plymouth Boot Screen... [ 15.537981] audit: type=1130 audit(1570712167.989:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Show Plymouth Boot Screen. [ 15.700786] sdhci: Secure Digital Host Controller Interface driver [ 15.707076] sdhci: Copyright(c) Pierre Ossman [ OK ] Started Forward Password R…s to Plymouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. [ 15.740219] sdhci-pltfm: SDHCI platform and OF driver helper [ 15.754684] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) [ 15.794450] mmc1: SDHCI controller on 3f300000.mmcnr [3f300000.mmcnr] using PIO [ 15.821959] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator [ 15.830730] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator [ 15.841052] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 15.848531] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 15.856129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 15.865042] mmc0: host does not support reading read-only switch, assuming write-enable [ 15.866846] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 15.875216] mmc0: new high speed SDHC card at address b368 [ 15.950869] mmc1: new high speed SDIO card at address 0001 [ 15.976102] mmcblk0: mmc0:b368 SD 7.70 GiB [ 15.986045] mmcblk0: p1 p2 p3 [ 16.070431] dwc2 3f980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 16.078706] dwc2 3f980000.usb: DWC OTG Controller [ 16.084240] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 [ 16.091829] dwc2 3f980000.usb: irq 41, io mem 0x3f980000 [ 16.097759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 16.106280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.113665] usb usb1: Product: DWC OTG Controller [ 16.118444] usb usb1: Manufacturer: Linux 5.3.7-301.fc31.aarch64 dwc2_hsotg [ 16.125556] usb usb1: SerialNumber: 3f980000.usb [ 16.131415] hub 1-0:1.0: USB hub found [ 16.135322] hub 1-0:1.0: 1 port detected [ 16.450481] rc_core: IR keymap rc-cec not found [ 16.455094] Registered IR keymap rc-empty [ 16.459395] rc rc0: vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 16.466435] input: vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 16.474810] debugfs: Directory '3f902000.hdmi' with parent 'vc4-hdmi' already present! [ 16.482975] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory: -17 [ 16.495296] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 16.505420] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 16.516293] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 16.523527] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 16.530539] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 16.537748] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 16.545691] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 16.553702] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 16.561295] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 16.568021] fb0: switching to vc4drmfb from EFI VGA [ 16.573460] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.580172] [drm] Driver supports precise vblank timestamp query. [ 16.588102] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 16.590421] usb 1-1: new high-speed USB device number 2 using dwc2 [ 16.625314] fbcon: Deferring console take-over [ 16.629847] vc4-drm soc:gpu: fb0: vc4drmfb frame buffer device [ OK ] Star[ 16.732191] audit: type=1130 audit(1570712169.189:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=suc' ted udev Wait for Complete Device Initialization. [ 16.759269] audit: type=1130 audit(1570712169.219:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=multipathd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting Device-Mapper Multipath Device Controller... [ OK ] Started Device-Mapper Multipath Device Controller. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 16.850782] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 16.859102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 16.876771] audit: type=1130 audit(1570712169.329:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [[ 16.898212] hub 1-1:1.0: USB hub found OK 16.902810] hub 1-1:1.0: 4 ports detected 0m] Started Create Volatile Files and Directories. [ OK ] Reached target System Initialization. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Listening on 16.928214] audit: type=1130 audit(1570712169.379:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsiuio comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=succe' 0;1;39mOpen-iSCSI iscsiuio Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting iSCSI UserSpace I/O driver... [ OK ] Started iSCSI UserSpace I/O driver. Starting Open-iSCSI... [ 16.989230] audit: type=1130 audit(1570712169.439:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started Open-iSCSI. [ 17.260389] usb 1-1.1: new high-speed USB device number 3 using dwc2 [ 17.400768] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 17.409262] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.417760] hub 1-1.1:1.0: USB hub found [ 17.422030] hub 1-1.1:1.0: 3 ports detected [ OK ] Found device /dev/mapper/fedora-root. [ OK ] Reached target Initrd Root Device. [[ 18.062227] audit: type=1130 audit(1570712170.519:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Started dracut initqueue hook. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting dracut pre-mount hook... [ 18.140342] usb 1-1.1.1: new high-speed USB device number 4 using dwc2 [[ 18.207528] audit: type=1130 audit(1570712170.659:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Started dracut pre-mount hook. Starting File System Check on /dev/mapper/fedora-root... [ 18.280994] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 18.289663] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [[ 18.402707] audit: type=1130 audit(1570712170.859:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Started File System Check on /dev/mapper/fedora-root. Mounting /sysroot... [ 18.564867] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 18.576504] libphy: lan78xx-mdiobus: probed [ 18.673514] random: crng init done [ 18.676986] random: 7 urandom warning(s) missed due to ratelimiting [ 18.690748] usbcore: registered new interface driver lan78xx [ 19.107163] SGI XFS with ACLs, security attributes, scrub, no debug enabled [ 19.132181] XFS (dm-0): Mounting V5 Filesystem [ 20.209944] XFS (dm-0): Ending clean mount [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [[ 21.494328] audit: type=1130 audit(1570712173.949:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK 21.515139] audit: type=1131 audit(1570712173.949:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 0m] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut mount hook... [ OK ] Started dracut mount hook. Starting dracut pre-pivot and cleanup hook... [ 22.019332] dracut-pre-pivot[723]: Oct 10 12:56:14 | /etc/multipath.conf does not exist, blacklisting all devices. [ 22.020079] dracut-pre-pivot[723]: Oct 10 12:56:14 | You can run "/sbin/mpathconf --enable" to create [ 22.020664] dracut-pre-pivot[723]: Oct 10 12:56:14 | /etc/multipath.conf. See man mpathconf(8) for more details [[ 22.234962] kauditd_printk_skb: 1 callbacks suppressed OK 22.234973] audit: type=1130 audit(1570712174.689:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 0m] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target 22.324753] audit: type=1131 audit(1570712174.779:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?' ;39mTimers. [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped target 22.357300] audit: type=1131 audit(1570712174.809:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res' [ 22.379535] audit: type=1131 audit(1570712174.829:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Sto[ 22.401853] audit: type=1131 audit(1570712174.859:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=succes' pped target Basic System. [ OK ] Stopped target Initrd Root Device. [ OK ] Stopped target Paths. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] [ 22.451913] audit: type=1131 audit(1570712174.909:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Stopped target Slices. [ 22.479517] audit: type=1130 audit(1570712174.929:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.500414] audit: type=1131 audit(1570712174.929:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' m OK ] Sto[ 22.521527] audit: type=1131 audit(1570712174.979:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsiuio comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' pped dracut mount hook. [ OK ] Stopped 22.547900] audit: type=1131 audit(1570712174.999:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=succ' ;39mdracut pre-mount hook. [ OK ] Stopped dracut initqueue hook. Stopping Open-iSCSI... Starting Plymouth switch root service... [ OK ] Stopped Open-iSCSI. [ OK ] Closed Open-iSCSI iscsid Socket. Stopping iSCSI UserSpace I/O driver... [ OK ] Started Cleaning Up and Shutting Down Daemons. [ OK ] Stopped iSCSI UserSpace I/O driver. [ OK ] Closed Open-iSCSI iscsiuio Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped target Swap. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Local File Systems (Pre). Stopping Device-Mapper Multipath Device Controller... [ OK ] Started Plymouth switch root service. [ OK ] Stopped Device-Mapper Multipath Device Controller. [ OK ] Stopped udev Wait for Complete Device Initialization. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped dracut pre-trigger hook. Stopping udev Kernel Device Manager... [ OK ] Stopped udev Kernel Device Manager. [ OK ] Closed udev Control Socket. [ OK ] Closed udev Kernel Socket. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. [ OK ] Stopped dracut ask for additional cmdline parameters. Starting Cleanup udevd DB... [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of sta… nodes for the current kernel. Starting Setup Virtual Console... [ OK ] Started Cleanup udevd DB. [ OK ] Started Setup Virtual Console. [ OK ] Reached target Switch Root. Starting Switch Root... [ 23.038528] systemd-journald[280]: Received SIGTERM from PID 1 (systemd). [ 23.505895] printk: systemd: 22 output lines suppressed due to ratelimiting [ 26.881569] SELinux: policy capability network_peer_controls=1 [ 26.887586] SELinux: policy capability open_perms=1 [ 26.892654] SELinux: policy capability extended_socket_class=1 [ 26.898657] SELinux: policy capability always_check_network=0 [ 26.904586] SELinux: policy capability cgroup_seclabel=1 [ 26.910059] SELinux: policy capability nnp_nosuid_transition=1 [ 27.148608] systemd[1]: Successfully loaded SELinux policy in 2.821265s. [ 27.232188] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 27.764153] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 397.256ms. [ 27.792966] systemd[1]: systemd v243-4.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 ) [ 27.817514] systemd[1]: Detected architecture arm64. Welcome to 27.843433] systemd[1]: Set hostname to . 0;34mFedora 31 (Server Edition)! [ 29.695853] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 29.899602] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 29.922120] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. [ 30.052509] systemd[1]: /usr/lib/systemd/system/sssd-kcm.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/.heim_org.h5l.kcm-socket → /run/.heim_org.h5l.kcm-socket; please update the unit f . [ 30.080686] systemd[1]: /usr/lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. [ 30.583989] kauditd_printk_skb: 20 callbacks suppressed [ 30.583999] audit: type=1131 audit(1570726583.040:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? r' [ 30.586499] systemd[1]: initrd-switch-root.service: Succeeded. [ 30.618823] systemd[1]: Stopped Switch Root. [[ 30.624765] audit: type=1130 audit(1570726583.080:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=' OK 30.647631] audit: type=1131 audit(1570726583.080:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termi' 0m] Stopped Switch Root. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Stopped target Initrd Root File System. [ OK ] Reached target Paths. [ OK ] Reached target rpc_pipefs.target. [ OK ] Reached target Slices. [ OK ] Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Listening on multipathd control socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on udev Contro[ 30.796825] audit: type=1131 audit(1570726583.250:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/syste' l Socket. [ 30.820587] audit: type=1130 audit(1570726583.280:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? r' [[ 30.843373] audit: type=1131 audit(1570726583.280:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? ' OK ] Listening on udev Kernel Socket. Mounting Huge Pages File System... Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... Starting Create list of st…odes for the current kernel... Starting Monitoring of LVM…meventd or progress polling... Starting Preprocess NFS configuration convertion... [ OK ] Stopped File System Check on Root Device. [ OK ] Stopped Journal Service. Starting Journal Service... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... Starting udev Coldplug all Devices... Starting Setup Virtual Console... Starting Enable compressed swap in memory using zram... [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File Sys[ 30.993381] audit: type=1130 audit(1570726583.450:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/' tem. [ OK ] Started Create list of sta… nodes for the current kernel. [ OK [ 31.026443] audit: type=1130 audit(1570726583.470:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?' ] St[ 31.048707] audit: type=1131 audit(1570726583.470:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? re' arted 31.070781] audit: type=1130 audit(1570726583.480:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? ter' 0;1;39mPreprocess NFS configuration convertion. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... [ OK ] Started Apply Kernel Variables. [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... [ OK ] Started Load/Save Random Seed. [ 31.817107] zram: Added device: zram0 [ 32.001089] zram0: detected capacity change from 0 to 475000832 [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 32.120979] Adding 463864k swap on /dev/zram0. Priority:1000 extents:1 across:463864k SSFS [ OK ] Started Enable compressed swap in memory using zram. [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ 32.324637] systemd-journald[793]: Received client request to flush runtime journal. [ 32.340740] systemd-journald[793]: File /var/log/journal/15fb73e3f7d44943ae7b6ee95b82046b/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Started Setup Virtual Console. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ 35.153295] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 35.168786] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 35.179425] bcm2835-rng 3f104000.rng: hwrng registered [ 35.193155] vchiq: vchiq_init_state: slot_zero = 000000005fffc3a0 [ OK ] Reached target Sound Card. [ OK ] Created slice system-lvm2\x2dpvscan.slice. Starting LVM event activation on device 179:3... [ 35.947583] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 35.959519] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK 36.059094] kauditd_printk_skb: 12 callbacks suppressed m] Start[ 36.059106] audit: type=1130 audit(1570726588.510:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal' ed Monitoring of LVM2… dmeventd or progress polling. [ 36.351593] audit: type=1130 audit(1570726588.810:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@179:3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? ' [ OK ] Started LVM event activation on device 179:3. [ 36.457064] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 36.470129] usbcore: registered new interface driver brcmfmac [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 36.607730] mc: Linux media interface: v0.10 [ 36.617494] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 36.649775] bcm2835_audio bcm2835_audio: card created with 8 channels [ 36.652899] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 36.665494] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 36.677614] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 Starting 36.717830] Bluetooth: Core ver 2.22 39mLoad/Save RF Kill Swi[ 36.723493] NET: Registered protocol family 31 tch Stat[ 36.728296] Bluetooth: HCI device and connection manager initialized us..[ 36.735747] Bluetooth: HCI socket layer initialized . [ 36.744431] Bluetooth: L2CAP socket layer initialized [ 36.749831] Bluetooth: SCO socket layer initialized [ 36.769781] videodev: Linux video capture interface: v2.00 [[ 36.858048] audit: type=1130 audit(1570726589.310:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? re' OK ] Started Load/Save RF Kill Switch Status. [ 36.945981] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [[ 37.639674] audit: type=1130 audit(1570726590.090:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal' OK ] Started udev Wait for Complete Device Initialization. Starting Activation of DM RAID sets... [[ 37.807221] audit: type=1130 audit(1570726590.260:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?' OK 37.829989] audit: type=1131 audit(1570726590.260:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termin' 0m] Started Activation of DM RAID sets. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Local File Systems (Pre). Mounting /boot... Starting File System Check…/dev/disk/by-uuid/B7C7-D61F... [ 37.881866] XFS (mmcblk0p2): Mounting V5 Filesystem [ 38.567825] XFS (mmcblk0p2): Ending clean mount [ OK ] Mounted /boot. [[ 38.725873] audit: type=1130 audit(1570726591.180:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-B7C7\x2dD61F comm="systemd" exe="/usr/lib/systemd/systemd" ' OK ] Started File System Check on /dev/disk/by-uuid/B7C7-D61F. Mounting /boot/efi... [ OK ] Mounted /boot/efi. [ OK ] Reached target Local File Systems. Starting Restore /run/initramfs on shutdown... Starting Import network configuration from initramfs... Starting Tell Plymouth To Write Out Runtime[ 38.883363] audit: type=1130 audit(1570726591.340:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/' Data... [ OK ] Started Restore /run/initramfs on shutdown. [[ 38.958407] audit: type=1130 audit(1570726591.410:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal' OK 38.981389] audit: type=1131 audit(1570726591.410:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? term' 0m] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Security Auditing Service... [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started dnf makecache --timer. [ OK ] Started Updates mlocate database every day. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Cockpit Web Service Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Listening on SSSD Kerberos…ache Manager responder socket. [ OK ] Listening on Cockpit Web Service Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Modem Manager... Starting ABRT Automated Bug Reporting Tool... Starting NTP client/server... [ OK ] Started Secure Boot DBX (blacklist) updater. Starting firewalld - dynamic firewall daemon... Starting GSSAPI Proxy Daemon... Starting Initial Setup configuration program... [ OK ] Started irqbalance daemon. Starting Hardware Monitoring Sensors... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting System Logging Service... Starting Self Monitoring a…g Technology (SMART) Daemon... [ OK ] Reached target sshd-keygen.target. Starting System Security Services Daemon... [ 51.935471] lan78xx 1-1.1.1:1.0 eth0: kevent 4 may have been dropped [ 51.942028] ------------[ cut here ]------------ [ 51.946752] irq 79 handler irq_default_primary_handler+0x0/0x20 enabled interrupts [ 51.954527] WARNING: CPU: 0 PID: 959 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x224/0x230 [ 51.963883] Modules linked in: ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter vfat fat bcm2835_v4l2(C) videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common v4l2_common btsdio videodev r [ 52.052153] CPU: 0 PID: 959 Comm: sssd Tainted: G C 5.3.7-301.fc31.aarch64 #1 [ 52.060710] Hardware name: raspberrypi rpi/rpi, BIOS 2019.10 10/09/2019 [ 52.067418] pstate: 40400005 (nZcv daif +PAN -UAO) [ 52.072278] pc : __handle_irq_event_percpu+0x224/0x230 [ 52.077486] lr : __handle_irq_event_percpu+0x224/0x230 [ 52.082690] sp : ffff000010003cc0 [ 52.086043] x29: ffff000010003cc0 x28: ffffc19a6a0bce00 [ 52.091428] x27: ffff270120afe018 x26: ffff270120afe018 [ 52.096812] x25: ffff270120f2af38 x24: ffff000010003d4c [ 52.102194] x23: 0000000000000000 x22: 000000000000004f [ 52.107580] x21: ffffc19a6a0bce28 x20: 0000000000000002 [ 52.112965] x19: ffffc19a6533c880 x18: 0000000000000000 [ 52.118349] x17: 0000000000000000 x16: 0000000000000000 [ 52.123732] x15: 0000000000000010 x14: ffffffffffffffff [ 52.129116] x13: ffff0000900039ef x12: ffff0000100039f7 [ 52.134499] x11: ffff270120f55000 x10: ffff270120741518 [ 52.139882] x9 : ffff270121149000 x8 : 00000000000001bb [ 52.145264] x7 : 0000000000000017 x6 : 0000000000000001 [ 52.150647] x5 : 0000000000000000 x4 : ffffc19a7dd13210 [ 52.156029] x3 : ffffc19a7dd21288 x2 : ffffc19a7dd13210 [ 52.161412] x1 : 00009a995d213000 x0 : 0000000000000046 [ 52.166796] Call trace: [ 52.169275] __handle_irq_event_percpu+0x224/0x230 [ 52.174131] handle_irq_event_percpu+0x28/0x70 [ 52.178634] handle_irq_event+0x50/0xa8 [ 52.182520] handle_simple_irq+0xac/0xf8 [ 52.186494] generic_handle_irq+0x34/0x50 [ 52.190567] intr_complete+0xf0/0x178 [lan78xx] [ 52.195160] __usb_hcd_giveback_urb+0x74/0x140 [ 52.199661] usb_giveback_urb_bh+0xe0/0x170 [ 52.203902] tasklet_action_common.isra.0+0x98/0x108 [ 52.208933] tasklet_hi_action+0x2c/0x38 [ 52.212908] __do_softirq+0x138/0x334 [ 52.216619] irq_exit+0xc0/0xe0 [ 52.219803] __handle_domain_irq+0x70/0xc0 [ 52.223952] bcm2836_arm_irqchip_handle_irq+0x74/0xd8 [ 52.229070] el1_irq+0xf0/0x1c0 [ 52.232253] poll_freewait+0xac/0xc0 [ 52.235873] do_sys_poll+0x3cc/0x5a0 [ 52.239494] __arm64_sys_ppoll+0x8c/0xc0 [ 52.243471] el0_svc_common.constprop.0+0x74/0x168 [ 52.248327] el0_svc_handler+0x34/0x90 [ 52.252124] el0_svc+0x8/0xc [ 52.255040] ---[ end trace aeea2e4e8d8f5521 ]--- [ 52.283144] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 131.872050] uart-pl011 3f201000.serial: no DMA platform data [ 133.635472] fbcon: Taking over console [ 133.653705] Console: switching to colour frame buffer device 128x48 ================================================================================ ================================================================================ 1) [x] Language settings 2) [x] Time settings (English (United States)) (US/Eastern timezone) 3) [x] Network configuration 4) [x] Root password (Wired (eth0) connected) (Disabled. Set password to enable root account.) 5) [ ] User creation (No user will be created) Please make a selection from the above ['c' to continue, 'q' to quit, 'r' to refresh]: