El dom, 14-10-2018 a las 16:24 +0200, Torbjorn Jansson escribió:
for a while now i have been struggling to create a set of steps to
successfully bootable fedora 28 image for my odroid hc2 computers.
the reason for this is several, but main one is to have all gluster
packaged available like the samba vfs modules and iscsi related
gluster that is missing from the ubuntu images.
plus i prefer fedora.
all i get is a sd card that boots but then hangs on initial setup and
if i try
to work around that by disabling it then boot takes maybe 5-10
minutes at least
with failing services (probably those that depend on network) and
finally get to a login prompt root doesn't work
here is my step by step instructions so far that's not quite working:
(this is done from a fedora 28 host)
1: first install needed packages
dnf install arm-image-installer-2.5-1.fc28.noarch
dnf install uboot-images-armv7-2018.03-6.fc28.noarch
2: get image and install it to sd card
--image=Fedora-Minimal-armhfp-28-1.1-sda.raw.xz --resizefs --
--media=/dev/sdf --args "rd.driver.pre=ledtrig-heartbeat,xhci-plat-
cpuidle.off=1 no_bL_switcher console=tty1 console=ttySAC2,115200n8"
given the hardware you will not want a console on tty1 and being first
it is likely where initial-setup is being run
(sdf in this case is my sd card)
3: fix the missing dtb file
mount -t auto /dev/sdf2 /tmp/sd
ln -s exynos5422-odroidxu4.dtb exynos5422-odroidunknown.dtb
4: make it boot by running sd_fusing
mkdir sd_fusing; cd sd_fusing
chmod a+x sd_fusing.sh
cp /usr/share/uboot/odroid-xu3/u-boot.bin .
ok so now comes the problems
at this stage i have a bootable image but it gets stuck, most likely
setup that never shows up.
the thing is, it is not locked up because if i plug in an usb device
i get a
few lines on the serial console so kernel is still working but boot
last few lines on serial console is something like:
Starting firewalld - dynamic firewall daemon...
Starting Initial Setup configuration program...
then some stuff related to usb & my disk
then on first boot a few lines related to OpenSSH key generation
rebooting hangs at same place with exception of SSH keys.
to get a bit further i can mount the root filesystem manually on my
computer and remove the following two files:
this gets rid of the initial setup but then i get a whole bunch of
failing and boot being really really slow, it takes probably 10-15
everything to time out and get to the logon prompt.
when i get it root doesn't work.
this is where i kind of gave up.
i know i somehow managed to get a bootable image several months ago,
not sure if i then had to manually set root password by editing
shadow before trying to boot.
things on my wish list for this board:
easier installation and updated packages that work.
for example arm-image-installer with a board definition for odroid.
may be usefull even if we have to run sd_fusing manualy after anyway,
with a text saying so.
this also would help to make --addconsole work
uboot that recognized hc2 so it loads the right file
dtb file for hc2, one that works and is appropriate.
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html