For reference this issue is now fixed in the 2019.04 GA build on it's
way to F-30 testing repos.
Peter
On Sun, Mar 3, 2019 at 10:18 PM Robert Moskowitz <rgm(a)htt-consult.com> wrote:
>
> The environment is only the uboot on the uSD and all partitions on the
> sata HD.
>
> I have been doing this for years now with no problem. uboot has always
> switched to looking for the sata hd for partitions if no partitions on
> the uSD:
>
> U-Boot SPL 2018.09-rc3 (Sep 05 2018 - 19:12:48 +0000)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2018.09-rc3 (Sep 05 2018 - 19:12:48 +0000) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: Cubietech Cubieboard2
> I2C: ready
> DRAM: 1 GiB
> MMC: SUNXI SD/MMC: 0
> Loading Environment from FAT... ** No valid partitions found **
> In: serial
> Out: serial
> Err: serial
> SCSI: Target spinup took 0 ms.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
>
> Net: eth0: ethernet@01c50000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> ** Invalid partition 1 **
> scanning bus for devices...
> Device 0: (0:0) Vendor: ATA Prod.: WDC WD800BEVS-75 Rev: 04.0
> Type: Hard Disk
> Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
> Found 1 device(s).
>
> Device 0: (0:0) Vendor: ATA Prod.: WDC WD800BEVS-75 Rev: 04.0
> Type: Hard Disk
> Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
> ... is now current device
> Scanning scsi 0:2...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 567 bytes read in 33 ms (16.6 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command: autoboot
> Ignoring malformed menu command: hidden
> Ignoring unknown command: totaltimeout
> CentOS-Userland-7-armv7hl-generic-Minimal-1810 Boot Options.
> 1: CentOS-Userland-7-armv7hl-generic-Minimal-1810
> (4.14.82-201.el7.armv7hl)
>
> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-1810 (4.14.82-
> 201.el7.armv7hl)
> Retrieving file: /initramfs-4.14.82-201.el7.armv7hl.img
>
> Yes, this particular event is with the current Centos arm image, but
> that should not matter. I have to get this Centos image built and
> installed before I can test with Fedora arm image....
>
> I grabbed a more recent uboot via:
>
> Fedora-Minimal-armhfp-30-20190301.n.0-sda
>
> When I try booting with the uboot in that image I get:
>
> U-Boot SPL 2019.04-rc2 (Feb 19 2019 - 10:00:37 +0000)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2019.04-rc2 (Feb 19 2019 - 10:00:37 +0000) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: Cubietech Cubieboard2
> I2C: ready
> DRAM: 1 GiB
> MMC: mmc@1c0f000: 0
> Loading Environment from FAT... ** No valid partitions found **
> In: serial
> Out: serial
> Err: serial
> SCSI: Target spinup took 0 ms.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
>
> Net: sunxi_set_gate: (CLK#66) unhandled
> eth0: ethernet@1c50000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning bus 3 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> ** Invalid partition 1 **
> scanning bus for devices...
> data abort
> pc : [<7ef86b0e>] lr : [<7ef82d89>]
> reloc pc : [<4a01ab0e>] lr : [<4a016d89>]
> sp : 7af43ad0 ip : 0000001c fp : 000000c0
> r10: 00000000 r9 : 7af4bed8 r8 : 00000000
> r7 : 7af43d50 r6 : 7efc4894 r5 : 7efcc2f8 r4 : 7efcc2f8
> r3 : 00000000 r2 : 00000000 r1 : ea000016 r0 : 7efcc2f8
> Flags: nZcv IRQs off FIQs off Mode SVC_32
> Code: e92dbd10 f8d045f0 b0858080 1000f8d8 (f8d14604)
> Resetting CPU ...
>
> resetting ...
>
> U-Boot SPL 2019.04-rc2 (Feb 19 2019 - 10:00:37 +0000)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2019.04-rc2 (Feb 19 2019 - 10:00:37 +0000) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: Cubietech Cubieboard2
> I2C: ready
> DRAM: 1 GiB
> MMC: mmc@1c0f000: 0
> Loading Environment from FAT... ** No valid partitions found **
> In: serial
> Out: serial
> Err: serial
>
> and so forth....
>
> If there is a rc3 available, please tell me what image to grab for it
> and I can test with that.
>
> Meanwhile, it seems there is a problem here.
>
> thanks
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://getfedora.org/code-of-conduct.html
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org