Hi,
Hello together, hello Peter,
I've on my Pinebook Pro U-Boot 2022.10.
Howto: https://nullr0ute.com/2021/05/fedora-on-the-pinebook-pro/
Does it make sence to update U-Boot to up2date Version from Fedora 39 (uboot-images-armv8-2023-07-3.fc39.noarch) ? Are there any significant changes ?
Whatever you decide, don't install 2023.10-rc3. It's broken. I still haven't found the time to disassemble my PBP and put it into maskrom mode to recover. I'll probably have some time next week and will try to install 2023.10 final.
So I finally got time to look into this on my PBP and what's happened is they're moved the offsets the u-boot.itb needs to be written.
So if you do the following for the SPI flash rather than the previous one it should work: sf update ${fdt_addr_r} E0000 ${filesize}
A nasty hack that may work is if you use the spi-flashing-disk to setup a mSD card with the same version that's on the SPI flash it may boot with that to a U-Boot prompt to save taking it to pieces.
spi-flashing-disk --media=/dev/sda --target=pinebook-pro-rk3399
I am going to update the details in the blog post to cover this, also we can likely now move to a single command for flashing a combined blob in F-40. Note I've also discovered a bug in the U-Boot menu if booting off NVME, I am looking into that currently.
Peter