On Mon, Dec 15, 2014 at 5:24 AM, Robert Brown
> Thanks for the reply Peter.
> On 15/12/14 15:58, Peter Robinson wrote:
>> On Mon, Dec 15, 2014 at 4:52 AM, Robert Brown <rebrown(a)exemail.com.au
>>> Found several log files with date 01/01/1970 (attached).
>>> /var/log/chrony was
>> Would be until network comes up and chrony can start
>>> Messages log reports:
>>> EXYNOS: PMU not supported and
>>> edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
>>> edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
>> All spurious, for HW other than AllWinner
>>> fairly early on. And
1c18000.sata: PHY power up failed.
>>> ahci-sunxi: probe of 1c18000.sata failed with error -5
>> Do you have a SATA device attached?
> No sata device attached.
>>> Generated key 1
>>> Fatal error : getpwnam(chrony) failed
>>> getpwnam(chrony) failed
>>> A search found all of
these were empty:
>>> First things to check
>> Maybe I missed in it earlier posts but what A10 device are you using?
> This is a Rikomagic MK802II hdmi device. Trying to boot headless with no
> serial console!
What uboot are you using, are you specifying a .dtb file, if so what one?
I have applied /usr/share/uboot/Mele_A1000/u-boot-sunxi-with-spl.bin
using dd. This Mele device has shown a very high compatibility
previously with the MK802II. Other u-boot options that I could try might
be Cubieboard (1) and maybe A10-OLinuXino-Lime but less sure of this
Is my understanding correct that this step would have applied
sun4i-a10-a1000.dtb or have I missed a step?