Ext2ls and the usb start commands are built into uboot. You need to be at the uboot prompt
to use them.
----- Reply message -----
From: "Robert Moskowitz" <rgm(a)htt-consult.com>
To: "Paul Whalen" <pwhalen(a)redhat.com>
Cc: <arm(a)lists.fedoraproject.org>
Subject: [fedora-arm] Bad image/instructions? - Re: Problems with a pogoplug v02
Date: Thu, Apr 18, 2013 4:19 pm
On 04/18/2013 03:11 PM, Paul Whalen wrote:
----- Original Message -----
> Per:
>
>
fedoraproject.org/wiki/Architectures/ARM/F18/GuruPlug
>
> I just downloaded the image again from:
>
>
http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Images/arm/F...
>
> This time I took a 4Gb usb drive I got from MicroCenter that still had a
> FAT partition. On my F18 notebook as root, I ran:
>
> xzcat Fedora-18-kirkwood-arm.img.xz > /dev/sdc1
Hi Rob,
In your above example your writing to the first partition. Try changing that to:
xzcat Fedora-18-kirkwood-arm.img.xz > /dev/sdc
Hope that works,
OK. I kind of figured out part of this. That is, I had more to do
after the 1st boot, per:
fedoraproject.org/wiki/Architectures/ARM/F18/GuruPlug
Problem is with the instructions:
# NOTE: substitute "usb 1:1" with "usb 0:1" on non-Plus model devices,
or try:
usb start
ext2ls usb x:1
#where x can be any integer but usually 0-3, the right number will show
a directory listing including the files uInitrd and uImage
Well no usb or ext2ls commands. I searched all over the image. I ran
updatedb, the tried locate. Nothing. Now what?
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm