$ sudo arm-image-installer --image=Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
--target=orangepi_prime --media=/dev/sdc
I got
=====================================================
= Selected Image:
= Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
= Selected Media : /dev/sdc
= U-Boot Target : orangepi_prime
=====================================================
*****************************************************
*****************************************************
******** WARNING! ALL DATA WILL BE DESTROYED ********
*****************************************************
*****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes
= Writing:
= Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
= To: /dev/sdc ....
0+638450 records in
0+638450 records out
5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1994.96 s, 2.8 MB/s
= Writing image complete!
= Writing sunxi-spl.bin for orangepi_prime ....
dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': No
such file or directory
= Writing u-boot FIT image for orangepi_prime ....
dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': No such
file or directory
= Installation Complete! Insert into the orangepi_prime and boot.
TIA I hope hope this helps
note: I have been able to get my RPI 3 Model B running from this
Fedora-Xfce-armhfp-29-1.2-sda.raw.xz