On Tue, Nov 28, 2017 at 4:33 AM, Stewart Samuels <searider74(a)gmail.com> wrote:
Sorry it took me so long to get back. I have just tested kernel
4.15.0-0.rc0.git7.2.fc28.armv7hl and can confirm that indeed, USB 3 devices
are now recognized as is the onboard gigabit ethernet port. However, the
system still requires the "cpuidle.off=1" argument on the
"append" line of
the extlinux.conf file to boot.
Why is this a problem?
> On 11/21/2017 08:49 AM, Andreas Reschke wrote:
>> Am 15.11.2017 um 23:02 schrieb Stewart Samuels:
>>> So, to follow up with my last transmission, I did indeed down load the
>>> latest updates to both F26 & F27. The kernel I just tested on F27 is
>>> 4.13.12-200. It appears Andreas is correct in that USB 3 still does not
>>> respond from what I can see.
>>> On 11/15/2017 08:53 AM, Stewart Samuels wrote:
>>>> I was under the impression that the fix was going to be released into
>>>> kernel 4.15 based on this response from you Peter. And based on your
>>>> schedule, I was also under the impression that any of these fixes
>>>> likely would not go into earlier releases, so I haven't tested them.
>>>> As this was the last set of communications we have had regarding these
>>>> issues, I was not aware that you had actually pushed the upstream
>>>> patch. Now that I know you have, I will retest them by downloading
>>>> the latest updates to F27.
>> Hello together,
>> with the actuell kernel 4.15.0-0.rc0.git6.1.fc28.armv7hl it seems to work:
>> [root@odroidh1 ~]# lsusb
>> Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 005 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
>> Gigabit Ethernet Adapter
>> Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 004 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA
>> Technology Corp.
>> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> [root@odroidh1 ~]# lsblk
>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
>> sda 8:0 0 118G 0 disk
>> ├─sda1 8:1 0 680M 0 part
>> └─sda2 8:2 0 6,1M 0 part
>> mmcblk1 179:0 0 14,9G 0 disk
>> ├─mmcblk1p1 179:1 0 29M 0 part
>> ├─mmcblk1p2 179:2 0 488M 0 part /boot
>> ├─mmcblk1p3 179:3 0 488M 0 part [SWAP]
>> └─mmcblk1p4 179:4 0 14G 0 part /
>> [root@odroidh1 ~]#
>> Now the onboard network and the ssd is working on my Odroid HC1. Next
>> test is the Odroid Xu4.
>> Thanks to everybody who made work.
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org