On Mon, Jan 28, 2019 at 5:18 PM Patrick Charles François Ernzer
<pcfe(a)redhat.com> wrote:
There's some discussion of this on the upstream USB mailing list:
https://www.spinics.net/lists/linux-usb/msg176210.html
I think this is also related:
https://www.spinics.net/lists/linux-usb/msg176223.html
Yes. While I can live with adding 'xhci-plat-hcd', another annoyance is
that on some of the reboots the bard boots fine but fails to initialise
the network device:
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
RTL8153 Gigabit Ethernet Adapter
dmesg in that state at
https://paste.fedoraproject.org/paste/zOqTsC8EiWsRaM2DTQojJA
lsusb in that state at
https://paste.fedoraproject.org/paste/Iq-ZBtl29GG9xvtVD2~Ijw
I'm happy to provide more logs is needed, I've just wired up 2 serial
consoles permanently, that makes life easier.
FWIW: when the ODROID is in this state of not having access to the
network, clean reboots issued via serial console end up in the same
disconnected state. (I've tried 3 consecutive reboots just now).
Additionally, I have the hardware watchdog set up and when I
forcefully crash a system in this state with
[root@localhost ~]# echo '1' > /proc/sys/kernel/sysrq
[root@localhost ~]# echo 'c' > /proc/sysrq-trigger
Network remains unreachable after the reboot triggered by the watchdog
(also tested 3 times in a row)
Power cycling the ODOID has, so far, always resolved the issue.
pcfe