On Fri, Apr 3, 2020 at 6:13 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
Hi Fred,

Am 03.04.20 um 13:10 schrieb Fred van Zwieten:
> I haven't retried it yet, but I do have some extra info on my previous
> (and failed) attempt:
>
> I used arm-image-installer as the tool. As it does not yet have a rpi4
> target, I used the rpi3 value. It does boot, but, like I said, it
> hangs in a later stage. I will provide screenshots when I am able to
> test again.
>
> This is the (relevant) output from /proc/cpuinfo:
> Hardware : BCM2835
> Revision : c03111
> Serial : 1000000094b1358a
> Model : Raspberry Pi 4 Model B Rev 1.1

this should work with Linux 5.6. So i don't have an idea what's the
problem here.

I have the exact same model/revision (confirmed with /proc/cpuinfo when booting raspbian) and mine boots without problems.

These are the steps I did to get it to boot to gnome-shell:

Wrote Fedora-Minimal-32-20200328.n.0.aarch64.raw.xz (latest compose from koji at the time) with arm-image-installer to the sd.
Resized partion.
Booted and set up users etc.

Once booted I ran:
# dnf update
# dnf install fedora-release-workstation-32 --allowerasing
# dnf group install workstation-product
# dnf install bash-completion

and then after a reboot:
# systemctl start graphical.target

This got me a gnome-shell (on llvmipe obviously, but it is usable)
 
Rev 1.2 needs recent changes to sdhci-iproc and the devicetree.

Best regards
Stefan

>
> - Fred
>
> On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke <arm_ml@rirasoft.de
> <mailto:arm_ml@rirasoft.de>> wrote:
>
>     Hello Dirk,
>
>     I've tried it with balenaEtcher: It works !!
>
>     Thank you for that tip !!
>
>     Andreas
>
>     PS: I dind't know why it not works with xzcat and dd but now I have a
>     working method.
>
>     Am 03.04.20 um 10:23 schrieb Dirk Streubel:
>     >> Hello together,
>     >>
>     >> Hello Dirk
>     >>
>     >> how did you you install
>     Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card?
>     >>
>     >> Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd
>     of=/dev/sdc status=progress bs=4M
>     >>
>     >> didn't work for me. All I get is a dracut shell
>     >>
>     >>
>     >> Thanks
>     >>
>     >> Andreas
>     > Hello Andreas,
>     >
>     > yes, i installed the two Version yesterday on a 64 GB SD Card.
>     >
>     > Image has been unpacked with all necessary tools.
>     >
>     > For installation on the SD Card i use balenaEtcher. That Program
>     works fine here.
>     >
>     > Dirk
>     >
>     >
>     >
>     >
>     >
>     >> _______________________________________________
>     >> arm mailing list -- arm@lists.fedoraproject.org
>     <mailto:arm@lists.fedoraproject.org>
>     >> To unsubscribe send an email to
>     arm-leave@lists.fedoraproject.org
>     <mailto:arm-leave@lists.fedoraproject.org>
>     >> Fedora Code of Conduct:
>     https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>     >> List Guidelines:
>     https://fedoraproject.org/wiki/Mailing_list_guidelines
>     >> List Archives:
>     https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
>     > _______________________________________________
>     > arm mailing list -- arm@lists.fedoraproject.org
>     <mailto:arm@lists.fedoraproject.org>
>     > To unsubscribe send an email to
>     arm-leave@lists.fedoraproject.org
>     <mailto:arm-leave@lists.fedoraproject.org>
>     > Fedora Code of Conduct:
>     https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>     > List Guidelines:
>     https://fedoraproject.org/wiki/Mailing_list_guidelines
>     > List Archives:
>     https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
>     _______________________________________________
>     arm mailing list -- arm@lists.fedoraproject.org
>     <mailto:arm@lists.fedoraproject.org>
>     To unsubscribe send an email to arm-leave@lists.fedoraproject.org
>     <mailto:arm-leave@lists.fedoraproject.org>
>     Fedora Code of Conduct:
>     https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>     List Guidelines:
>     https://fedoraproject.org/wiki/Mailing_list_guidelines
>     List Archives:
>     https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
>
>
> _______________________________________________
> arm mailing list -- arm@lists.fedoraproject.org
> To unsubscribe send an email to arm-leave@lists.fedoraproject.org
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org