On 02/25/2015 09:33 AM, Robert Moskowitz wrote:
On 02/25/2015 09:19 AM, Cole Robinson wrote:
> Hey all,
>
> First time trying to setup my cubietruck/cubieboard3. I used
> fedora-arm-installer[1] to fill in an 8GB sd card on my host machine, using
> Fedora-Minimal-armhfp-21-5-sda.raw.xz.
Did you include
--target=Cubietruck
Yes, I used --target=Cubietruck.
on the installer script command? (case insensitive, ir you read the
script)
I have run this successfully on my Cubietruck and Cubieboard2 (I sent in a
script change to support the C2, don't know if it has been rolled in).
Though I am now working with F22 Alpha to get video support.
> Pop it into my cubietruck, connect via serial console, start it up. Machine
> passes uboot fine and boots the initrd, but eventually fails waiting for the
> root mount point to show up, and falls back to dracut.
Mount the card on your host system and see that you get the __boot and __
partitions. Perhaps there is something wrong with your card install step.
After I build an SD card, I use gparted to increase the __ partition to max
size for the card. The I pull out the card from my host system. I would like
to see this step automated in the script.
The sdcard mounts fine on multiple machines using an sd-to-usb adapter, and
all partitions are accounted for. That's the only other way I have to test an
sdcard
Thanks,
Cole