[fedora-arm] Pogoplug pink E02

I was able to get the pogo pink to boot the F18-kirkwood-20121220.img.xz off a usb thumb drive. It uses 1.1 usb which is doggy slow, and it is NOT saving env vars which is a PITA. But they are: setenv usb_boot 'if ext2load usb $usb_device 0x1100000 /uInitrd; then bootm 0x800000 0x1100000;else bootm 0x800000;fi;' setenv usb_load_uimage 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /uImage' setenv usb_root /dev/sda3 (this is the doozan uboot, but I am wondering if I shouldnt get something else. anyone tried anything else?) I am also seeing this during the boot: Is this rewriting the nand?? [   34.638654] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), page size: 2048, OOB size: 64 [   34.723723] Scanning device for bad blocks [   34.728417] Bad eraseblock 6 at 0x0000000c0000 [   34.733218] Bad eraseblock 11 at 0x000000160000 [   34.740889] Bad eraseblock 53 at 0x0000006a0000 [   34.749666] Bad eraseblock 110 at 0x000000dc0000 [   34.762924] Bad eraseblock 226 at 0x000001c40000 [   34.774550] Bad eraseblock 320 at 0x000002800000 [   34.786623] Bad eraseblock 420 at 0x000003480000 [   34.794733] Bad eraseblock 467 at 0x000003a60000 [   34.802999] Bad eraseblock 516 at 0x000004080000 [   34.821846] Bad eraseblock 707 at 0x000005860000 [   34.826595] Bad eraseblock 709 at 0x0000058a0000 [   34.832545] Bad eraseblock 727 at 0x000005ae0000 [   34.837667] Bad eraseblock 734 at 0x000005bc0000 [   34.843248] Bad eraseblock 747 at 0x000005d60000 [   35.091406] Creating 3 MTD partitions on "orion_nand": [   35.132266] 0x000000000000-0x000000100000 : "u-boot" [   35.203610] 0x000000100000-0x000000500000 : "uImage" [   35.272698] 0x000000500000-0x000008000000 : "root" Also, the 'reboot' command isn't working on the guruplug plus. I haven't tried it on the pogoplug ironically as I have to leave right now.