On Tue, Apr 4, 2017 at 2:18 AM, Rafael Leiva-Ochoa <spawn(a)rloteck.net&gt; wrote: > Hi Everyone, > > I have a Raspberry Pi 3 running a 64GB card. After installing Fedora 25 > Server, I tried using the xfs_growfs command to enlarge the partition. But, > it does not work. I have done this before on my other Pi's with no problems. > Restarting did not help. Any ideas? Did you expand the partition first? PS re-forwarding the same email is not useful, you'll likely just get more ignored next time! > Here is the out of my Pi: > > [root@localhost ~]# df -H > > Filesystem Size Used Avail Use% Mounted on > > devtmpfs 451M 0 451M 0% /dev > > tmpfs 509M 13k 509M 1% /dev/shm > > tmpfs 509M 435k 509M 1% /run > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > tmpfs 102M 0 102M 0% /run/user/0 > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# lsblk > > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > > mmcblk0 179:0 0 59.5G 0 disk > > ├─mmcblk0p4 179:4 0 2.8G 0 part / > > ├─mmcblk0p2 179:2 0 488M 0 part /boot > > ├─mmcblk0p3 179:3 0 488M 0 part [SWAP] > > └─mmcblk0p1 179:1 0 29M 0 part > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# xfs_growfs /dev/mmcblk0p4 > > meta-data=/dev/mmcblk0p4 isize=512 agcount=4, agsize=183104 blks > > = sectsz=512 attr=2, projid32bit=1 > > = crc=1 finobt=1 spinodes=0 rmapbt=0 > > = reflink=0 > > data = bsize=4096 blocks=732416, imaxpct=25 > > = sunit=0 swidth=0 blks > > naming =version 2 bsize=4096 ascii-ci=0 ftype=1 > > log =internal bsize=4096 blocks=2560, version=2 > > = sectsz=512 sunit=0 blks, lazy-count=1 > > realtime =none extsz=4096 blocks=0, rtextents=0 > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# > > [root@localhost ~]# df -H > > Filesystem Size Used Avail Use% Mounted on > > devtmpfs 451M 0 451M 0% /dev > > tmpfs 509M 13k 509M 1% /dev/shm > > tmpfs 509M 435k 509M 1% /run > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > tmpfs 102M 0 102M 0% /run/user/0 > > [root@localhost ~]# > > > Thanks, > > > Rafael > > > _______________________________________________ > arm mailing list -- arm(a)lists.fedoraproject.org > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org >

Hi Rafael, ----- Original Message ----- > Does the xfs_growfs not do that? > > The process on the wiki page only has the resize process. > > Thanks, From the wiki[1]: # enlarge the 4th partition (this example uses mmcblk0) growpart /dev/mmcblk0 4 # grow the fileystem to fill the available space resize2fs /dev/mmcblk0p4 # for the server image (which uses xfs) xfs_growfs /dev/mmcblk0p4 Paul [1] - https://fedoraproject.org/wiki/Architectures/ARM/F26/Installation#FAQ > > Rafael > On Wed, Apr 5, 2017 at 6:35 AM Peter Robinson < pbrobinson(a)gmail.com > wrote: > > > On Tue, Apr 4, 2017 at 2:18 AM, Rafael Leiva-Ochoa < spawn(a)rloteck.net > > wrote: > > Hi Everyone, > > > > I have a Raspberry Pi 3 running a 64GB card. After installing Fedora 25 > > Server, I tried using the xfs_growfs command to enlarge the partition. But, > > it does not work. I have done this before on my other Pi's with no > > problems. > > Restarting did not help. Any ideas? > > Did you expand the partition first? > > PS re-forwarding the same email is not useful, you'll likely just get > more ignored next time! > > > Here is the out of my Pi: > > > > [root@localhost ~]# df -H > > > > Filesystem Size Used Avail Use% Mounted on > > > > devtmpfs 451M 0 451M 0% /dev > > > > tmpfs 509M 13k 509M 1% /dev/shm > > > > tmpfs 509M 435k 509M 1% /run > > > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > > > tmpfs 102M 0 102M 0% /run/user/0 > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# lsblk > > > > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > > > > mmcblk0 179:0 0 59.5G 0 disk > > > > ├─mmcblk0p4 179:4 0 2.8G 0 part / > > > > ├─mmcblk0p2 179:2 0 488M 0 part /boot > > > > ├─mmcblk0p3 179:3 0 488M 0 part [SWAP] > > > > └─mmcblk0p1 179:1 0 29M 0 part > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# xfs_growfs /dev/mmcblk0p4 > > > > meta-data=/dev/mmcblk0p4 isize=512 agcount=4, agsize=183104 blks > > > > = sectsz=512 attr=2, projid32bit=1 > > > > = crc=1 finobt=1 spinodes=0 rmapbt=0 > > > > = reflink=0 > > > > data = bsize=4096 blocks=732416, imaxpct=25 > > > > = sunit=0 swidth=0 blks > > > > naming =version 2 bsize=4096 ascii-ci=0 ftype=1 > > > > log =internal bsize=4096 blocks=2560, version=2 > > > > = sectsz=512 sunit=0 blks, lazy-count=1 > > > > realtime =none extsz=4096 blocks=0, rtextents=0 > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# > > > > [root@localhost ~]# df -H > > > > Filesystem Size Used Avail Use% Mounted on > > > > devtmpfs 451M 0 451M 0% /dev > > > > tmpfs 509M 13k 509M 1% /dev/shm > > > > tmpfs 509M 435k 509M 1% /run > > > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > > > tmpfs 102M 0 102M 0% /run/user/0 > > > > [root@localhost ~]# > > > > > > Thanks, > > > > > > Rafael > > > > > > _______________________________________________ > > arm mailing list -- arm(a)lists.fedoraproject.org > > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org > > > > _______________________________________________ > arm mailing list -- arm(a)lists.fedoraproject.org > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org >

----- Original Message ----- > And I used the xfs_growfs /dev/mmcblk0p4.... and that did nothing. I > provided that as part of the first email that I sent. Prior to resizing the filesystem, you need to resize the partition. Try: growpart /dev/mmcblk0 4 Then: xfs_growfs /dev/mmcblk0p4 I'll try to make it clearer on the wiki. Thanks for pointing it out. Paul > > On Wed, Apr 5, 2017 at 6:56 AM Paul Whalen <pwhalen(a)redhat.com&gt; wrote: > > > > > Hi Rafael, > > > > ----- Original Message ----- > > > Does the xfs_growfs not do that? > > > > > > The process on the wiki page only has the resize process. > > > > > > Thanks, > > > > From the wiki[1]: > > > > # enlarge the 4th partition (this example uses mmcblk0) > > growpart /dev/mmcblk0 4 > > # grow the fileystem to fill the available space > > resize2fs /dev/mmcblk0p4 > > # for the server image (which uses xfs) > > xfs_growfs /dev/mmcblk0p4 > > > > > > Paul > > > > [1] - > > https://fedoraproject.org/wiki/Architectures/ARM/F26/Installation#FAQ > > > > > > > > Rafael > > > On Wed, Apr 5, 2017 at 6:35 AM Peter Robinson < pbrobinson(a)gmail.com > > > wrote: > > > > > > > > > On Tue, Apr 4, 2017 at 2:18 AM, Rafael Leiva-Ochoa < spawn(a)rloteck.net > > > > wrote: > > > > Hi Everyone, > > > > > > > > I have a Raspberry Pi 3 running a 64GB card. After installing Fedora 25 > > > > Server, I tried using the xfs_growfs command to enlarge the partition. > > But, > > > > it does not work. I have done this before on my other Pi's with no > > > > problems. > > > > Restarting did not help. Any ideas? > > > > > > Did you expand the partition first? > > > > > > PS re-forwarding the same email is not useful, you'll likely just get > > > more ignored next time! > > > > > > > Here is the out of my Pi: > > > > > > > > [root@localhost ~]# df -H > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > devtmpfs 451M 0 451M 0% /dev > > > > > > > > tmpfs 509M 13k 509M 1% /dev/shm > > > > > > > > tmpfs 509M 435k 509M 1% /run > > > > > > > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > > > > > > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > > > > > > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > > > > > > > tmpfs 102M 0 102M 0% /run/user/0 > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# lsblk > > > > > > > > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > > > > > > > > mmcblk0 179:0 0 59.5G 0 disk > > > > > > > > ├─mmcblk0p4 179:4 0 2.8G 0 part / > > > > > > > > ├─mmcblk0p2 179:2 0 488M 0 part /boot > > > > > > > > ├─mmcblk0p3 179:3 0 488M 0 part [SWAP] > > > > > > > > └─mmcblk0p1 179:1 0 29M 0 part > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# xfs_growfs /dev/mmcblk0p4 > > > > > > > > meta-data=/dev/mmcblk0p4 isize=512 agcount=4, agsize=183104 blks > > > > > > > > = sectsz=512 attr=2, projid32bit=1 > > > > > > > > = crc=1 finobt=1 spinodes=0 rmapbt=0 > > > > > > > > = reflink=0 > > > > > > > > data = bsize=4096 blocks=732416, imaxpct=25 > > > > > > > > = sunit=0 swidth=0 blks > > > > > > > > naming =version 2 bsize=4096 ascii-ci=0 ftype=1 > > > > > > > > log =internal bsize=4096 blocks=2560, version=2 > > > > > > > > = sectsz=512 sunit=0 blks, lazy-count=1 > > > > > > > > realtime =none extsz=4096 blocks=0, rtextents=0 > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# > > > > > > > > [root@localhost ~]# df -H > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > devtmpfs 451M 0 451M 0% /dev > > > > > > > > tmpfs 509M 13k 509M 1% /dev/shm > > > > > > > > tmpfs 509M 435k 509M 1% /run > > > > > > > > tmpfs 509M 0 509M 0% /sys/fs/cgroup > > > > > > > > /dev/mmcblk0p4 3.0G 2.1G 965M 68% / > > > > > > > > /dev/mmcblk0p2 479M 321M 144M 70% /boot > > > > > > > > tmpfs 102M 0 102M 0% /run/user/0 > > > > > > > > [root@localhost ~]# > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Rafael > > > > > > > > > > > > _______________________________________________ > > > > arm mailing list -- arm(a)lists.fedoraproject.org > > > > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org > > > > > > > > > > _______________________________________________ > > > arm mailing list -- arm(a)lists.fedoraproject.org > > > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org > > > > > >