Hello together,
I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64
every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32
[root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]#
Are there any tips and tricks to boot with more up2date kernel?
Thanks
Andreas
Hi Andreas
I use fedora32 on my raspberry 4 and it works fine with the latest kernel.
Note that I only managed to get the Minimal build to boot. See the former threads on the boot getting stuck in dracut for workstation images. I just used Minimal and then installed all the things from Workstation from dnf. It boots fine and the 4GB model I use even runs gnome-shell surprisingly smoothly.
On Thu, Apr 2, 2020 at 3:33 PM Andreas Reschke arm_ml@rirasoft.de wrote:
Hello together,
I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64
every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32
[root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]#
Are there any tips and tricks to boot with more up2date kernel?
Thanks
Andreas _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hello Thomas
I think that I have taken the Fedora-Workstation-31-1.9.aarch64.raw.xz to install my Raspi4.
Do you mean the Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz Image? I will try it with another SD-Card.
thanks
Andreas
Am 02.04.20 um 15:43 schrieb Thomas H.P. Andersen:
Hi Andreas
I use fedora32 on my raspberry 4 and it works fine with the latest kernel.
Note that I only managed to get the Minimal build to boot. See the former threads on the boot getting stuck in dracut for workstation images. I just used Minimal and then installed all the things from Workstation from dnf. It boots fine and the 4GB model I use even runs gnome-shell surprisingly smoothly.
On Thu, Apr 2, 2020 at 3:33 PM Andreas Reschke <arm_ml@rirasoft.de mailto:arm_ml@rirasoft.de> wrote:
Hello together, I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64 every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32 [root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]# Are there any tips and tricks to boot with more up2date kernel? Thanks Andreas _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work for me
On Thu, Apr 2, 2020 at 3:52 PM Andreas Reschke arm_ml@rirasoft.de wrote:
Hello Thomas
I think that I have taken the Fedora-Workstation-31-1.9.aarch64.raw.xz to install my Raspi4.
Do you mean the Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz Image? I will try it with another SD-Card.
thanks
Andreas Am 02.04.20 um 15:43 schrieb Thomas H.P. Andersen:
Hi Andreas
I use fedora32 on my raspberry 4 and it works fine with the latest kernel.
Note that I only managed to get the Minimal build to boot. See the former threads on the boot getting stuck in dracut for workstation images. I just used Minimal and then installed all the things from Workstation from dnf. It boots fine and the 4GB model I use even runs gnome-shell surprisingly smoothly.
On Thu, Apr 2, 2020 at 3:33 PM Andreas Reschke arm_ml@rirasoft.de wrote:
Hello together,
I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64
every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32
[root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]#
Are there any tips and tricks to boot with more up2date kernel?
Thanks
Andreas _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hi Fred,
----- Original Message -----
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work for me
What didnt work?
The minimal image should work OK (running it on two RPi4's). Desktop and server images are currently broken as others have mentioned.
On Thu, Apr 2, 2020 at 3:52 PM Andreas Reschke < arm_ml@rirasoft.de > wrote:
Hello Thomas
I think that I have taken the Fedora-Workstation-31-1.9.aarch64.raw.xz to install my Raspi4.
Do you mean the Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz Image? I will try it with another SD-Card.
thanks
Andreas Am 02.04.20 um 15:43 schrieb Thomas H.P. Andersen:
Hi Andreas
I use fedora32 on my raspberry 4 and it works fine with the latest kernel.
Note that I only managed to get the Minimal build to boot. See the former threads on the boot getting stuck in dracut for workstation images. I just used Minimal and then installed all the things from Workstation from dnf. It boots fine and the 4GB model I use even runs gnome-shell surprisingly smoothly.
On Thu, Apr 2, 2020 at 3:33 PM Andreas Reschke < arm_ml@rirasoft.de > wrote:
Hello together,
I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64
every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32
[root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]#
Are there any tips and tricks to boot with more up2date kernel?
Thanks
Andreas _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hi Paul,
From memory, it first hung for a long time before continuing and later it hung indefinitely (well, as long as my patience was). I will retry later and update the thread. I only have 1 rpi4 and it is in use as my private cloud, so i can not experiment at will.
- Fred
On Thu, Apr 2, 2020 at 6:31 PM Paul Whalen pwhalen@redhat.com wrote:
Hi Fred,
----- Original Message -----
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work
for me
What didnt work?
The minimal image should work OK (running it on two RPi4's). Desktop and server images are currently broken as others have mentioned.
On Thu, Apr 2, 2020 at 3:52 PM Andreas Reschke < arm_ml@rirasoft.de >
wrote:
Hello Thomas
I think that I have taken the Fedora-Workstation-31-1.9.aarch64.raw.xz to install my Raspi4.
Do you mean the Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz Image? I will
try
it with another SD-Card.
thanks
Andreas Am 02.04.20 um 15:43 schrieb Thomas H.P. Andersen:
Hi Andreas
I use fedora32 on my raspberry 4 and it works fine with the latest
kernel.
Note that I only managed to get the Minimal build to boot. See the former threads on the boot getting stuck in dracut for workstation images. I
just
used Minimal and then installed all the things from Workstation from
dnf. It
boots fine and the 4GB model I use even runs gnome-shell surprisingly smoothly.
On Thu, Apr 2, 2020 at 3:33 PM Andreas Reschke < arm_ml@rirasoft.de >
wrote:
Hello together,
I've Fedora 32 (beta) updated from Rawhide. The only kernel that boots correct is: 5.6.0-0.rc2.git0.1.fc32.aarch64
every newer kernel didn't find the root (/) UUID. Even the actual kernel 5.6.0-300.fc32
[root@fedora-raspi4 ~]# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda └─sda1 ext4 1.0 a8c60ba4-ec9d-4636-b5a1-64b54c48235f 9,5G 28% /home mmcblk1 ├─mmcblk1p1 vfat FAT32 51BA-42E4 566,8M 5% /boot/efi ├─mmcblk1p2 ext4 1.0 4d93649c-d4f6-412a-b81a-ba4c61dabfb3 795,2M 12% /boot └─mmcblk1p3 ext4 1.0 1cec3baa-ef02-4e33-9b78-4a38efa491eb 19,5G 25% / zram0 [SWAP] [root@fedora-raspi4 ~]#
Are there any tips and tricks to boot with more up2date kernel?
Thanks
Andreas _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an
to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hello Paul,
Am 02.04.20 um 18:31 schrieb Paul Whalen:
Hi Fred,
----- Original Message -----
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work for me
What didnt work?
The minimal image should work OK (running it on two RPi4's). Desktop and server images are currently broken as others have mentioned.
I have tested on my PI 4 yesterday and the Result is the same.
Minimal -32-Beta works without any Problems, the latest Server Version does not work.
Would you please explain, what the difference between this two Version is that Minimal runs, Server not?
Regards
Dirk
Am 03.04.20 um 09:28 schrieb Dirk Streubel:
Hello Paul,
Am 02.04.20 um 18:31 schrieb Paul Whalen:
Hi Fred,
----- Original Message -----
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work for me
What didnt work?
The minimal image should work OK (running it on two RPi4's). Desktop and server images are currently broken as others have mentioned.
I have tested on my PI 4 yesterday and the Result is the same.
Minimal -32-Beta works without any Problems, the latest Server Version does not work.
Would you please explain, what the difference between this two Version is that Minimal runs, Server not?
Regards
Dirk
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello Andreas,
yes, i installed the two Version yesterday on a 64 GB SD Card.
Image has been unpacked with all necessary tools.
For installation on the SD Card i use balenaEtcher. That Program works fine here.
Dirk
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hello Dirk,
I've tried it with balenaEtcher: It works !!
Thank you for that tip !!
Andreas
PS: I dind't know why it not works with xzcat and dd but now I have a working method.
Am 03.04.20 um 10:23 schrieb Dirk Streubel:
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello Andreas,
yes, i installed the two Version yesterday on a 64 GB SD Card.
Image has been unpacked with all necessary tools.
For installation on the SD Card i use balenaEtcher. That Program works fine here.
Dirk
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke arm_ml@rirasoft.de wrote:
Hello Dirk,
I've tried it with balenaEtcher: It works !!
Thank you for that tip !!
Andreas
PS: I dind't know why it not works with xzcat and dd but now I have a working method.
Am 03.04.20 um 10:23 schrieb Dirk Streubel:
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on
SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc
status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello Andreas,
yes, i installed the two Version yesterday on a 64 GB SD Card.
Image has been unpacked with all necessary tools.
For installation on the SD Card i use balenaEtcher. That Program works
fine here.
Dirk
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo:
Are you running a custom or non Fedora kernel because the upstream kernel Fedora uses doesn't propagate most of the information such as a the Rev/Model number of the RPi.
Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke arm_ml@rirasoft.de wrote:
Hello Dirk,
I've tried it with balenaEtcher: It works !!
Thank you for that tip !!
Andreas
PS: I dind't know why it not works with xzcat and dd but now I have a working method.
Am 03.04.20 um 10:23 schrieb Dirk Streubel:
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello Andreas,
yes, i installed the two Version yesterday on a 64 GB SD Card.
Image has been unpacked with all necessary tools.
For installation on the SD Card i use balenaEtcher. That Program works fine here.
Dirk
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hi Peter,
Yeah, I currently run Buster on it. As soon as I can get to an RH based aarch distro, I jump.
Fedora 32 aarch is the one, I hope...
- Fred
On Fri, Apr 3, 2020 at 1:17 PM Peter Robinson pbrobinson@gmail.com wrote:
I haven't retried it yet, but I do have some extra info on my previous
(and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4
target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo:
Are you running a custom or non Fedora kernel because the upstream kernel Fedora uses doesn't propagate most of the information such as a the Rev/Model number of the RPi.
Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke arm_ml@rirasoft.de
wrote:
Hello Dirk,
I've tried it with balenaEtcher: It works !!
Thank you for that tip !!
Andreas
PS: I dind't know why it not works with xzcat and dd but now I have a working method.
Am 03.04.20 um 10:23 schrieb Dirk Streubel:
Hello together,
Hello Dirk
how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on
SD-Card?
Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd
of=/dev/sdc status=progress bs=4M
didn't work for me. All I get is a dracut shell
Thanks
Andreas
Hello Andreas,
yes, i installed the two Version yesterday on a 64 GB SD Card.
Image has been unpacked with all necessary tools.
For installation on the SD Card i use balenaEtcher. That Program
works fine here.
Dirk
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
On Fri, 3 Apr 2020, Fred van Zwieten wrote:
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
I am also having problems with my Pi 4 with the latest Fedora 32 kernels and it is also Revision : c03111
Michael Young
Hi Fred,
Am 03.04.20 um 13:10 schrieb Fred van Zwieten:
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
this should work with Linux 5.6. So i don't have an idea what's the problem here.
Rev 1.2 needs recent changes to sdhci-iproc and the devicetree.
Best regards Stefan
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke <arm_ml@rirasoft.de mailto:arm_ml@rirasoft.de> wrote:
Hello Dirk, I've tried it with balenaEtcher: It works !! Thank you for that tip !! Andreas PS: I dind't know why it not works with xzcat and dd but now I have a working method. Am 03.04.20 um 10:23 schrieb Dirk Streubel: >> Hello together, >> >> Hello Dirk >> >> how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card? >> >> Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M >> >> didn't work for me. All I get is a dracut shell >> >> >> Thanks >> >> Andreas > Hello Andreas, > > yes, i installed the two Version yesterday on a 64 GB SD Card. > > Image has been unpacked with all necessary tools. > > For installation on the SD Card i use balenaEtcher. That Program works fine here. > > Dirk > > > > > >> _______________________________________________ >> arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> >> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> >> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org > _______________________________________________ > arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> > To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
On Fri, Apr 3, 2020 at 6:13 PM Stefan Wahren stefan.wahren@i2se.com wrote:
Hi Fred,
Am 03.04.20 um 13:10 schrieb Fred van Zwieten:
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
this should work with Linux 5.6. So i don't have an idea what's the problem here.
I have the exact same model/revision (confirmed with /proc/cpuinfo when booting raspbian) and mine boots without problems.
These are the steps I did to get it to boot to gnome-shell:
Wrote Fedora-Minimal-32-20200328.n.0.aarch64.raw.xz (latest compose from koji at the time) with arm-image-installer to the sd. Resized partion. Booted and set up users etc.
Once booted I ran: # dnf update # dnf install fedora-release-workstation-32 --allowerasing # dnf group install workstation-product # dnf install bash-completion
and then after a reboot: # systemctl start graphical.target
This got me a gnome-shell (on llvmipe obviously, but it is usable)
Rev 1.2 needs recent changes to sdhci-iproc and the devicetree.
Best regards Stefan
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke <arm_ml@rirasoft.de mailto:arm_ml@rirasoft.de> wrote:
Hello Dirk, I've tried it with balenaEtcher: It works !! Thank you for that tip !! Andreas PS: I dind't know why it not works with xzcat and dd but now I have a working method. Am 03.04.20 um 10:23 schrieb Dirk Streubel: >> Hello together, >> >> Hello Dirk >> >> how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card? >> >> Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M >> >> didn't work for me. All I get is a dracut shell >> >> >> Thanks >> >> Andreas > Hello Andreas, > > yes, i installed the two Version yesterday on a 64 GB SD Card. > > Image has been unpacked with all necessary tools. > > For installation on the SD Card i use balenaEtcher. That Program works fine here. > > Dirk > > > > > >> _______________________________________________ >> arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> >> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> >> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> _______________________________________________ > arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> > To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
_______________________________________________ arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Hi,
OK, my issue was a "glitch in the matrix". I retried with another sd-card (Kingston 8GB) and it now just works! My use case is server only, so I will not test any desktop stuff.
- Fred
On Sat, Apr 4, 2020 at 1:46 AM Thomas H.P. Andersen phomes@gmail.com wrote:
On Fri, Apr 3, 2020 at 6:13 PM Stefan Wahren stefan.wahren@i2se.com wrote:
Hi Fred,
Am 03.04.20 um 13:10 schrieb Fred van Zwieten:
I haven't retried it yet, but I do have some extra info on my previous (and failed) attempt:
I used arm-image-installer as the tool. As it does not yet have a rpi4 target, I used the rpi3 value. It does boot, but, like I said, it hangs in a later stage. I will provide screenshots when I am able to test again.
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
this should work with Linux 5.6. So i don't have an idea what's the problem here.
I have the exact same model/revision (confirmed with /proc/cpuinfo when booting raspbian) and mine boots without problems.
These are the steps I did to get it to boot to gnome-shell:
Wrote Fedora-Minimal-32-20200328.n.0.aarch64.raw.xz (latest compose from koji at the time) with arm-image-installer to the sd. Resized partion. Booted and set up users etc.
Once booted I ran: # dnf update # dnf install fedora-release-workstation-32 --allowerasing # dnf group install workstation-product # dnf install bash-completion
and then after a reboot: # systemctl start graphical.target
This got me a gnome-shell (on llvmipe obviously, but it is usable)
Rev 1.2 needs recent changes to sdhci-iproc and the devicetree.
Best regards Stefan
- Fred
On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke <arm_ml@rirasoft.de mailto:arm_ml@rirasoft.de> wrote:
Hello Dirk, I've tried it with balenaEtcher: It works !! Thank you for that tip !! Andreas PS: I dind't know why it not works with xzcat and dd but now I havea
working method. Am 03.04.20 um 10:23 schrieb Dirk Streubel: >> Hello together, >> >> Hello Dirk >> >> how did you you install Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card? >> >> Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd of=/dev/sdc status=progress bs=4M >> >> didn't work for me. All I get is a dracut shell >> >> >> Thanks >> >> Andreas > Hello Andreas, > > yes, i installed the two Version yesterday on a 64 GB SD Card. > > Image has been unpacked with all necessary tools. > > For installation on the SD Card i use balenaEtcher. That Program works fine here. > > Dirk > > > > > >> _______________________________________________ >> arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> >> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> >> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> _______________________________________________ > arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> > To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
_______________________________________________ arm mailing list -- arm@lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org> To unsubscribe send an email to arm-leave@lists.fedoraproject.org <mailto:arm-leave@lists.fedoraproject.org> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
On Sun, 5 Apr 2020, Fred van Zwieten wrote:
OK, my issue was a "glitch in the matrix". I retried with another sd-card (Kingston 8GB) and it now just works! My use case is server only, so I will not test any desktop stuff.
I worked out how to get my pi4 working the 5.6.2-300.fc32.aarch64 kernel without a reinstall. The kernelopts line in grubenv in my install was kernelopts=root=UUID=72375f48-5ce5-49c8-b5df-88d8afcd2122 ro cma=192MB which worked with 5.6.0-0.rc2.git0.1.fc32.aarch64 but not any later kernels I tried. The newer images don't have the cma=192MB option and if I remove that (I used grub2-editenv but it might be better to remove the GRUB_CMDLINE_LINUX="cma=192MB" line in /etc/defaults/grub and rebuild the grub files with grub2-mkconfig) then the pi4 boots successfully with 5.6.2-300.fc32.aarch64
Michael Young
This is the (relevant) output from /proc/cpuinfo: Hardware : BCM2835 Revision : c03111 Serial : 1000000094b1358a Model : Raspberry Pi 4 Model B Rev 1.1
this should work with Linux 5.6. So i don't have an idea what's the problem here.
Rev 1.2 needs recent changes to sdhci-iproc and the devicetree.
Is that these two or are they a different set?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
Peter
Hi Fred,
Am 02.04.20 um 18:17 schrieb Fred van Zwieten:
I tried Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz but it did not work for me
could you also please tell which hardware revision of the Raspberry Pi 4 you are using?
Regards Stefan
-
Andreas Reschke -
Dirk Streubel -
Fred van Zwieten -
Michael Young -
Paul Whalen -
Peter Robinson -
Stefan Wahren -
Thomas H.P. Andersen