Just resurected my old RPi 3 and as long as latest f27 image was OK I've pushed it to rawhide and seems current rawhide kernel has some issues on RPi 3.
Just quick question: are below issues are already known or should I open ticket(s)?
(ful dmesg in attachment)
1)
[ 95.367454] Hardware name: Generic DT based system [ 95.367810] Workqueue: hci0 hci_cmd_work [bluetooth] [ 95.367848] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 95.367868] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 95.367887] [<c0b7e310>] (dump_stack) from [<c03b2dd4>] (register_lock_class+0x298/0x514) [ 95.367905] [<c03b2dd4>] (register_lock_class) from [<c03b716c>] (__lock_acquire+0xe4/0x11f8) [ 95.367921] [<c03b716c>] (__lock_acquire) from [<c03b8e4c>] (lock_acquire+0x280/0x2dc) [ 95.367940] [<c03b8e4c>] (lock_acquire) from [<c0b99634>] (_raw_read_lock+0x4c/0x5c) [ 95.368057] [<c0b99634>] (_raw_read_lock) from [<bf58603c>] (hci_uart_tx_wakeup+0x1c/0x98 [hci_uart]) [ 95.368243] [<bf58603c>] (hci_uart_tx_wakeup [hci_uart]) from [<bf5870f0>] (hci_uart_send_frame+0x54/0x6c [hci_uart]) [ 95.368669] [<bf5870f0>] (hci_uart_send_frame [hci_uart]) from [<bf2ff26c>] (hci_send_frame+0xcc/0xf8 [bluetooth]) [ 95.369271] [<bf2ff26c>] (hci_send_frame [bluetooth]) from [<bf2ff340>] (hci_cmd_work+0xa8/0x124 [bluetooth]) [ 95.369581] [<bf2ff340>] (hci_cmd_work [bluetooth]) from [<c03735a4>] (process_one_work+0x444/0x840) [ 95.369598] [<c03735a4>] (process_one_work) from [<c0374d80>] (worker_thread+0x290/0x40c) [ 95.369615] [<c0374d80>] (worker_thread) from [<c037aac0>] (kthread+0x174/0x1a0) [ 95.369633] [<c037aac0>] (kthread) from [<c03087c8>] (ret_from_fork+0x14/0x2c) [ 95.507788] Bluetooth: hci0: BCM: chip id 94
2)
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
3) some issue with missing symbol due systemd run
[ 57.304786] systemd-journald[193]: Received SIGTERM from PID 1 (systemd). [ 59.997395] systemd: 15 output lines suppressed due to ratelimiting [ 61.986368] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 75.141028] unwind: Unknown symbol address bf067284 [ 75.141036] unwind: Index not found bf067284 [ 78.120054] systemd-journald[457]: Received request to flush runtime journal from PID 1 [ 78.255026] unwind: Unknown symbol address bf067284 [ 78.269971] unwind: Index not found bf067284 [ 78.284717] unwind: Unknown symbol address bf067284 [ 78.299588] unwind: Index not found bf067284 [ 78.314816] unwind: Unknown symbol address bf067284
These messages about "Unknown symbol address bf067284" are repeated after this several times.
4)
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
kloczek
On Wed, Oct 11, 2017 at 1:59 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Just resurected my old RPi 3 and as long as latest f27 image was OK I've pushed it to rawhide and seems current rawhide kernel has some issues on RPi 3.
Just quick question: are below issues are already known or should I open ticket(s)?
Don't bother with tickets, focus has been 4.13 atm due to F27 and time constraints.
1) is bluetoorh 2 and 4) are the same, I believe patches are under review for upstream 3) systemd, not kernel
(ful dmesg in attachment)
[ 95.367454] Hardware name: Generic DT based system [ 95.367810] Workqueue: hci0 hci_cmd_work [bluetooth] [ 95.367848] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 95.367868] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 95.367887] [<c0b7e310>] (dump_stack) from [<c03b2dd4>] (register_lock_class+0x298/0x514) [ 95.367905] [<c03b2dd4>] (register_lock_class) from [<c03b716c>] (__lock_acquire+0xe4/0x11f8) [ 95.367921] [<c03b716c>] (__lock_acquire) from [<c03b8e4c>] (lock_acquire+0x280/0x2dc) [ 95.367940] [<c03b8e4c>] (lock_acquire) from [<c0b99634>] (_raw_read_lock+0x4c/0x5c) [ 95.368057] [<c0b99634>] (_raw_read_lock) from [<bf58603c>] (hci_uart_tx_wakeup+0x1c/0x98 [hci_uart]) [ 95.368243] [<bf58603c>] (hci_uart_tx_wakeup [hci_uart]) from [<bf5870f0>] (hci_uart_send_frame+0x54/0x6c [hci_uart]) [ 95.368669] [<bf5870f0>] (hci_uart_send_frame [hci_uart]) from [<bf2ff26c>] (hci_send_frame+0xcc/0xf8 [bluetooth]) [ 95.369271] [<bf2ff26c>] (hci_send_frame [bluetooth]) from [<bf2ff340>] (hci_cmd_work+0xa8/0x124 [bluetooth]) [ 95.369581] [<bf2ff340>] (hci_cmd_work [bluetooth]) from [<c03735a4>] (process_one_work+0x444/0x840) [ 95.369598] [<c03735a4>] (process_one_work) from [<c0374d80>] (worker_thread+0x290/0x40c) [ 95.369615] [<c0374d80>] (worker_thread) from [<c037aac0>] (kthread+0x174/0x1a0) [ 95.369633] [<c037aac0>] (kthread) from [<c03087c8>] (ret_from_fork+0x14/0x2c) [ 95.507788] Bluetooth: hci0: BCM: chip id 94
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- some issue with missing symbol due systemd run
[ 57.304786] systemd-journald[193]: Received SIGTERM from PID 1 (systemd). [ 59.997395] systemd: 15 output lines suppressed due to ratelimiting [ 61.986368] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 75.141028] unwind: Unknown symbol address bf067284 [ 75.141036] unwind: Index not found bf067284 [ 78.120054] systemd-journald[457]: Received request to flush runtime journal from PID 1 [ 78.255026] unwind: Unknown symbol address bf067284 [ 78.269971] unwind: Index not found bf067284 [ 78.284717] unwind: Unknown symbol address bf067284 [ 78.299588] unwind: Index not found bf067284 [ 78.314816] unwind: Unknown symbol address bf067284
These messages about "Unknown symbol address bf067284" are repeated after this several times.
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
kloczek
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
Thanks for reply Peter.
Just found that even on latest f27 kernel (4.13.4-300.fc27) execution of the sensors-detect command is causing OOPs.
[ 128.795887] Unable to handle kernel paging request at virtual address fee0002e [ 128.803514] pgd = c4a48000 [ 128.806362] [fee0002e] *pgd=00000000 [ 128.810133] Internal error: Oops: 805 [#1] SMP ARM [ 128.815171] Modules linked in: hci_uart btbcm btqca btintel brcmfmac bluetooth brcmutil cfg80211 ecdh_generic rfkill bcm2835_thermal bcm2835_rng bcm2835_wdt leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block vc4 snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer sdhci_iproc snd soundcore drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops crc32_arm_ce dwc2 drm udc_core sdhci_pltfm sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic sunrpc scsi_transport_iscsi [ 128.860708] CPU: 0 PID: 953 Comm: sensors-detect Not tainted 4.13.4-300.fc27.armv7hl #1 [ 128.869121] Hardware name: Generic DT based system [ 128.874159] task: ee7d6900 task.stack: c489a000 [ 128.878937] PC is at write_port+0x48/0xd0 [ 128.883155] LR is at write_port+0x44/0xd0 [ 128.887372] pc : [<c077c8b0>] lr : [<c077c8ac>] psr: 600f0013 [ 128.893960] sp : c489bee0 ip : 00000000 fp : 00855870 [ 128.899451] r10: ffffe000 r9 : 00855842 r8 : 000000aa [ 128.904945] r7 : c489bf88 r6 : 0000002f r5 : 00855870 r4 : 0000002e [ 128.911806] r3 : fee0002e r2 : 00000000 r1 : 00000051 r0 : 00855870 [ 128.918672] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 128.926171] Control: 10c5383d Table: 04a4806a DAC: 00000051 [ 128.932210] Process sensors-detect (pid: 953, stack limit = 0xc489a220) [ 128.939161] Stack: (0xc489bee0 to 0xc489c000) [ 128.943748] bee0: c5484d80 c077c868 00000000 c489bf88 00000001 c489a000 00000000 c04bf61c [ 128.952349] bf00: b6f37bfc 000001b0 00000001 c03012e8 ffffe000 c0a61ad8 c489bf2c c0a61ad8 [ 128.960950] bf20: 00000001 c077f8ec 00000027 c03a5320 00000001 ef0c1100 c1039680 c04c0cbc [ 128.969549] bf40: c5484d80 00000002 c5484d80 00000001 00000000 c489bf88 00855870 c04c0d08 [ 128.978151] bf60: c5484d80 00855870 00000001 c5484d80 c5484d80 00855870 00000001 c0307f84 [ 128.986751] bf80: c489a000 c04c1c00 0000002e 00000000 00000001 00532150 008352ec 00000004 [ 128.995351] bfa0: 00000004 c0307dc0 00532150 008352ec 00000003 00855870 00000001 00000000 [ 129.003951] bfc0: 00532150 008352ec 00000004 00000004 00000000 008352f8 008352f8 00855870 [ 129.012552] bfe0: b6f3828c bef41188 b6e80cec b6d42cdc 600f0010 00000003 2fffd861 2fffdc61 [ 129.021166] [<c077c8b0>] (write_port) from [<c04bf61c>] (__vfs_write+0x34/0x128) [ 129.028951] [<c04bf61c>] (__vfs_write) from [<c04c0d08>] (vfs_write+0xc0/0x194) [ 129.036644] [<c04c0d08>] (vfs_write) from [<c04c1c00>] (SyS_write+0x44/0x7c) [ 129.044069] [<c04c1c00>] (SyS_write) from [<c0307dc0>] (ret_fast_syscall+0x0/0x3c) [ 129.052031] Code: e8bd87f0 f57ff04e ebee724a e2443612 (e5c38000) [ 129.058440] ---[ end trace 5e8408a2d05ba102 ]---
kloczek
Tomasz Kłoczko | LinkedIn: *http://lnkd.in/FXPWxH http://lnkd.in/FXPWxH*
On 11 October 2017 at 10:44, Peter Robinson pbrobinson@gmail.com wrote:
On Wed, Oct 11, 2017 at 1:59 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Just resurected my old RPi 3 and as long as latest f27 image was OK I've pushed it to rawhide and seems current rawhide kernel has some issues on
RPi
Just quick question: are below issues are already known or should I open ticket(s)?
Don't bother with tickets, focus has been 4.13 atm due to F27 and time constraints.
- is bluetoorh
2 and 4) are the same, I believe patches are under review for upstream 3) systemd, not kernel
(ful dmesg in attachment)
[ 95.367454] Hardware name: Generic DT based system [ 95.367810] Workqueue: hci0 hci_cmd_work [bluetooth] [ 95.367848] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 95.367868] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 95.367887] [<c0b7e310>] (dump_stack) from [<c03b2dd4>] (register_lock_class+0x298/0x514) [ 95.367905] [<c03b2dd4>] (register_lock_class) from [<c03b716c>] (__lock_acquire+0xe4/0x11f8) [ 95.367921] [<c03b716c>] (__lock_acquire) from [<c03b8e4c>] (lock_acquire+0x280/0x2dc) [ 95.367940] [<c03b8e4c>] (lock_acquire) from [<c0b99634>] (_raw_read_lock+0x4c/0x5c) [ 95.368057] [<c0b99634>] (_raw_read_lock) from [<bf58603c>] (hci_uart_tx_wakeup+0x1c/0x98 [hci_uart]) [ 95.368243] [<bf58603c>] (hci_uart_tx_wakeup [hci_uart]) from [<bf5870f0>] (hci_uart_send_frame+0x54/0x6c [hci_uart]) [ 95.368669] [<bf5870f0>] (hci_uart_send_frame [hci_uart]) from [<bf2ff26c>] (hci_send_frame+0xcc/0xf8 [bluetooth]) [ 95.369271] [<bf2ff26c>] (hci_send_frame [bluetooth]) from
[<bf2ff340>]
(hci_cmd_work+0xa8/0x124 [bluetooth]) [ 95.369581] [<bf2ff340>] (hci_cmd_work [bluetooth]) from [<c03735a4>] (process_one_work+0x444/0x840) [ 95.369598] [<c03735a4>] (process_one_work) from [<c0374d80>] (worker_thread+0x290/0x40c) [ 95.369615] [<c0374d80>] (worker_thread) from [<c037aac0>] (kthread+0x174/0x1a0) [ 95.369633] [<c037aac0>] (kthread) from [<c03087c8>] (ret_from_fork+0x14/0x2c) [ 95.507788] Bluetooth: hci0: BCM: chip id 94
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma
mapped
cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt
btqca
btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0
02601bb8
02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850
b6f7aa48
02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010
ffffffff
[ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- some issue with missing symbol due systemd run
[ 57.304786] systemd-journald[193]: Received SIGTERM from PID 1
(systemd).
[ 59.997395] systemd: 15 output lines suppressed due to ratelimiting [ 61.986368] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 75.141028] unwind: Unknown symbol address bf067284 [ 75.141036] unwind: Index not found bf067284 [ 78.120054] systemd-journald[457]: Received request to flush runtime journal from PID 1 [ 78.255026] unwind: Unknown symbol address bf067284 [ 78.269971] unwind: Index not found bf067284 [ 78.284717] unwind: Unknown symbol address bf067284 [ 78.299588] unwind: Index not found bf067284 [ 78.314816] unwind: Unknown symbol address bf067284
These messages about "Unknown symbol address bf067284" are repeated after this several times.
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma
mapped
cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt
btqca
btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0
02601bb8
02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850
b6f7aa48
02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010
ffffffff
[ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
kloczek
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
On Wed, Oct 11, 2017 at 1:48 PM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Thanks for reply Peter.
Just found that even on latest f27 kernel (4.13.4-300.fc27) execution of the sensors-detect command is causing OOPs.
sensors-detect in what package?
Ultimately if there's a userspace crash you should use abrt to report a bug against that package
[ 128.795887] Unable to handle kernel paging request at virtual address fee0002e [ 128.803514] pgd = c4a48000 [ 128.806362] [fee0002e] *pgd=00000000 [ 128.810133] Internal error: Oops: 805 [#1] SMP ARM [ 128.815171] Modules linked in: hci_uart btbcm btqca btintel brcmfmac bluetooth brcmutil cfg80211 ecdh_generic rfkill bcm2835_thermal bcm2835_rng bcm2835_wdt leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block vc4 snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer sdhci_iproc snd soundcore drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops crc32_arm_ce dwc2 drm udc_core sdhci_pltfm sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic sunrpc scsi_transport_iscsi [ 128.860708] CPU: 0 PID: 953 Comm: sensors-detect Not tainted 4.13.4-300.fc27.armv7hl #1 [ 128.869121] Hardware name: Generic DT based system [ 128.874159] task: ee7d6900 task.stack: c489a000 [ 128.878937] PC is at write_port+0x48/0xd0 [ 128.883155] LR is at write_port+0x44/0xd0 [ 128.887372] pc : [<c077c8b0>] lr : [<c077c8ac>] psr: 600f0013 [ 128.893960] sp : c489bee0 ip : 00000000 fp : 00855870 [ 128.899451] r10: ffffe000 r9 : 00855842 r8 : 000000aa [ 128.904945] r7 : c489bf88 r6 : 0000002f r5 : 00855870 r4 : 0000002e [ 128.911806] r3 : fee0002e r2 : 00000000 r1 : 00000051 r0 : 00855870 [ 128.918672] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 128.926171] Control: 10c5383d Table: 04a4806a DAC: 00000051 [ 128.932210] Process sensors-detect (pid: 953, stack limit = 0xc489a220) [ 128.939161] Stack: (0xc489bee0 to 0xc489c000) [ 128.943748] bee0: c5484d80 c077c868 00000000 c489bf88 00000001 c489a000 00000000 c04bf61c [ 128.952349] bf00: b6f37bfc 000001b0 00000001 c03012e8 ffffe000 c0a61ad8 c489bf2c c0a61ad8 [ 128.960950] bf20: 00000001 c077f8ec 00000027 c03a5320 00000001 ef0c1100 c1039680 c04c0cbc [ 128.969549] bf40: c5484d80 00000002 c5484d80 00000001 00000000 c489bf88 00855870 c04c0d08 [ 128.978151] bf60: c5484d80 00855870 00000001 c5484d80 c5484d80 00855870 00000001 c0307f84 [ 128.986751] bf80: c489a000 c04c1c00 0000002e 00000000 00000001 00532150 008352ec 00000004 [ 128.995351] bfa0: 00000004 c0307dc0 00532150 008352ec 00000003 00855870 00000001 00000000 [ 129.003951] bfc0: 00532150 008352ec 00000004 00000004 00000000 008352f8 008352f8 00855870 [ 129.012552] bfe0: b6f3828c bef41188 b6e80cec b6d42cdc 600f0010 00000003 2fffd861 2fffdc61 [ 129.021166] [<c077c8b0>] (write_port) from [<c04bf61c>] (__vfs_write+0x34/0x128) [ 129.028951] [<c04bf61c>] (__vfs_write) from [<c04c0d08>] (vfs_write+0xc0/0x194) [ 129.036644] [<c04c0d08>] (vfs_write) from [<c04c1c00>] (SyS_write+0x44/0x7c) [ 129.044069] [<c04c1c00>] (SyS_write) from [<c0307dc0>] (ret_fast_syscall+0x0/0x3c) [ 129.052031] Code: e8bd87f0 f57ff04e ebee724a e2443612 (e5c38000) [ 129.058440] ---[ end trace 5e8408a2d05ba102 ]---
kloczek
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
On 11 October 2017 at 10:44, Peter Robinson pbrobinson@gmail.com wrote:
On Wed, Oct 11, 2017 at 1:59 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Just resurected my old RPi 3 and as long as latest f27 image was OK I've pushed it to rawhide and seems current rawhide kernel has some issues on RPi 3.
Just quick question: are below issues are already known or should I open ticket(s)?
Don't bother with tickets, focus has been 4.13 atm due to F27 and time constraints.
- is bluetoorh
2 and 4) are the same, I believe patches are under review for upstream 3) systemd, not kernel
(ful dmesg in attachment)
[ 95.367454] Hardware name: Generic DT based system [ 95.367810] Workqueue: hci0 hci_cmd_work [bluetooth] [ 95.367848] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 95.367868] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 95.367887] [<c0b7e310>] (dump_stack) from [<c03b2dd4>] (register_lock_class+0x298/0x514) [ 95.367905] [<c03b2dd4>] (register_lock_class) from [<c03b716c>] (__lock_acquire+0xe4/0x11f8) [ 95.367921] [<c03b716c>] (__lock_acquire) from [<c03b8e4c>] (lock_acquire+0x280/0x2dc) [ 95.367940] [<c03b8e4c>] (lock_acquire) from [<c0b99634>] (_raw_read_lock+0x4c/0x5c) [ 95.368057] [<c0b99634>] (_raw_read_lock) from [<bf58603c>] (hci_uart_tx_wakeup+0x1c/0x98 [hci_uart]) [ 95.368243] [<bf58603c>] (hci_uart_tx_wakeup [hci_uart]) from [<bf5870f0>] (hci_uart_send_frame+0x54/0x6c [hci_uart]) [ 95.368669] [<bf5870f0>] (hci_uart_send_frame [hci_uart]) from [<bf2ff26c>] (hci_send_frame+0xcc/0xf8 [bluetooth]) [ 95.369271] [<bf2ff26c>] (hci_send_frame [bluetooth]) from [<bf2ff340>] (hci_cmd_work+0xa8/0x124 [bluetooth]) [ 95.369581] [<bf2ff340>] (hci_cmd_work [bluetooth]) from [<c03735a4>] (process_one_work+0x444/0x840) [ 95.369598] [<c03735a4>] (process_one_work) from [<c0374d80>] (worker_thread+0x290/0x40c) [ 95.369615] [<c0374d80>] (worker_thread) from [<c037aac0>] (kthread+0x174/0x1a0) [ 95.369633] [<c037aac0>] (kthread) from [<c03087c8>] (ret_from_fork+0x14/0x2c) [ 95.507788] Bluetooth: hci0: BCM: chip id 94
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- some issue with missing symbol due systemd run
[ 57.304786] systemd-journald[193]: Received SIGTERM from PID 1 (systemd). [ 59.997395] systemd: 15 output lines suppressed due to ratelimiting [ 61.986368] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 75.141028] unwind: Unknown symbol address bf067284 [ 75.141036] unwind: Index not found bf067284 [ 78.120054] systemd-journald[457]: Received request to flush runtime journal from PID 1 [ 78.255026] unwind: Unknown symbol address bf067284 [ 78.269971] unwind: Index not found bf067284 [ 78.284717] unwind: Unknown symbol address bf067284 [ 78.299588] unwind: Index not found bf067284 [ 78.314816] unwind: Unknown symbol address bf067284
These messages about "Unknown symbol address bf067284" are repeated after this several times.
[ 107.079610] ------------[ cut here ]------------ [ 107.079645] WARNING: CPU: 1 PID: 1 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 107.079655] vc4-drm soc:gpu: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c8acc0] [ 107.079659] Modules linked in: ebtable_filter ebtables ip6table_filter ip6_tables rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore brcmfmac drm_kms_helper brcmutil drm fb_sys_fops hci_uart cfg80211 syscopyarea sysfillrect btbcm sysimgblt btqca btintel bluetooth bcm2835_wdt ecdh_generic rfkill bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc dwc2 sdhci_pltfm crc32_arm_ce udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 107.079932] CPU: 1 PID: 1 Comm: systemd Not tainted 4.14.0-0.rc3.git3.1.fc28.armv7hl #1 [ 107.079937] Hardware name: Generic DT based system [ 107.079973] [<c03131b4>] (unwind_backtrace) from [<c030d98c>] (show_stack+0x18/0x1c) [ 107.079995] [<c030d98c>] (show_stack) from [<c0b7e310>] (dump_stack+0xa0/0xd8) [ 107.080012] [<c0b7e310>] (dump_stack) from [<c0354024>] (__warn+0xe4/0x104) [ 107.080028] [<c0354024>] (__warn) from [<c0354080>] (warn_slowpath_fmt+0x3c/0x4c) [ 107.080045] [<c0354080>] (warn_slowpath_fmt) from [<c0711634>] (debug_dma_assert_idle+0x148/0x1e0) [ 107.080069] [<c0711634>] (debug_dma_assert_idle) from [<c04e59e8>] (wp_page_copy+0xfc/0x640) [ 107.080087] [<c04e59e8>] (wp_page_copy) from [<c04e74b8>] (do_wp_page+0x3a4/0x5ac) [ 107.080101] [<c04e74b8>] (do_wp_page) from [<c04ea810>] (handle_mm_fault+0xd28/0xde0) [ 107.080118] [<c04ea810>] (handle_mm_fault) from [<c0b9a980>] (do_page_fault+0x244/0x3b8) [ 107.080136] [<c0b9a980>] (do_page_fault) from [<c0301360>] (do_DataAbort+0x40/0xc0) [ 107.080151] [<c0301360>] (do_DataAbort) from [<c0b9a260>] (__dabt_usr+0x40/0x60) [ 107.080159] Exception stack(0xef113fb0 to 0xef113ff8) [ 107.080170] 3fa0: 02565dd0 02601bb8 02565df0 00000002 [ 107.080184] 3fc0: 02565df0 0260c920 02601bb8 befdd848 befdd850 b6f7aa48 02565dd0 02559508 [ 107.080196] 3fe0: b6dd38f4 befdd7c8 b6cd1e38 b6cc8f3c 20060010 ffffffff [ 107.080249] ---[ end trace 66ededa5d1568f0b ]--- [ 107.080253] Mapped at: [ 107.080345] vc4_bo_create+0xe4/0x198 [vc4] [ 107.080420] vc4_allocate_bin_bo+0x38/0x150 [vc4] [ 107.080494] vc4_v3d_bind+0x12c/0x20c [vc4] [ 107.080507] component_bind_all+0x138/0x220 [ 107.080581] vc4_drm_bind+0x88/0x130 [vc4] [ 108.193398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
kloczek
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
On 11 October 2017 at 16:21, Peter Robinson pbrobinson@gmail.com wrote:
On Wed, Oct 11, 2017 at 1:48 PM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Thanks for reply Peter.
Just found that even on latest f27 kernel (4.13.4-300.fc27) execution of
the
sensors-detect command is causing OOPs.
sensors-detect in what package?
From lm_sensors.
Ultimately if there's a userspace crash you should use abrt to report a bug against that package
It is not crash in user space. Execution of the user space binary sensors-detect is causing kernel space OOPS.
This is what is printed on the terminal on executing this program:
On Sat, Oct 28, 2017 at 7:38 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
On 11 October 2017 at 16:21, Peter Robinson pbrobinson@gmail.com wrote:
On Wed, Oct 11, 2017 at 1:48 PM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
Thanks for reply Peter.
Just found that even on latest f27 kernel (4.13.4-300.fc27) execution of the sensors-detect command is causing OOPs.
sensors-detect in what package?
From lm_sensors.
Ultimately if there's a userspace crash you should use abrt to report a bug against that package
It is not crash in user space. Execution of the user space binary sensors-detect is causing kernel space OOPS.
This is what is printed on the terminal on executing this program:
I don't believe sensors-detect should be used on the RPi, in fact on any ARM device as it's very much focused on servers/x86 and accessing things via DMI/SMbus and other pretty x86 methods, it uses rudimentary techniques to just bash random locations where there might be sensors.
What are you actually trying to achieve with it? The Pi OOTB has no onboard sensors of note, and the addons should likely be detected/accessed via GPIO or the IIO stack.
-- [root@rpi3 ~]# sensors-detect # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200) # DMI data unavailable, please consider installing dmidecode 2.7 # or later for better results. # Kernel: 4.14.0-0.rc6.git2.1.fc28.armv7hl armv7l Use of uninitialized value in concatenation (.) or string at /sbin/sensors-detect line 2867. Use of uninitialized value in concatenation (.) or string at /sbin/sensors-detect line 2867. Use of uninitialized value in concatenation (.) or string at /sbin/sensors-detect line 2867. # Processor: ARMv7 Processor rev 4 (v7l) (//)
This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): modprobe: FATAL: Module cpuid not found in directory /lib/modules/4.14.0-0.rc6.git2.1.fc28.armv7hl Failed to load module cpuid. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Segmentation fault [root@rpi3 ~]# Message from syslogd@rpi3 at Oct 28 02:32:13 ... kernel:Internal error: Oops: 805 [#1] SMP ARM
Message from syslogd@rpi3 at Oct 28 02:32:13 ... kernel:Process sensors-detect (pid: 854, stack limit = 0xec642220)
Message from syslogd@rpi3 at Oct 28 02:32:13 ... kernel:Stack: (0xec643ed0 to 0xec644000)
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3ec0: 00000001 000000aa 00000001 ed8df7c0
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3ee0: c082dd9c 00000000 ec643f88 00000001 ec642000 00000000 0219e028 c052b0c0
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3f00: 00000000 00000001 600f0013 c12085f4 00000000 c03b7dc0 00000001 00000000
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3f20: 00000000 c04e5130 00000000 00000000 ee839e24 00000000 ffffe000 c052b334
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3f40: ed8df7c0 00000002 ed8df7c0 00000001 00000000 ec643f88 0219e028 c052b380
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3f60: ed8df7c0 0219e028 00000001 ed8df7c0 ed8df7c0 0219e028 00000001 c0308884
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3f80: ec642000 c052b550 0000002e 00000000 00000001 01e7b150 0217e1fc 00000004
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3fa0: 00000004 c03086c0 01e7b150 0217e1fc 00000003 0219e028 00000001 00000000
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3fc0: 01e7b150 0217e1fc 00000004 00000004 00000000 0217e208 0217e208 0219e028
Message from syslogd@rpi3 at Oct 28 02:32:14 ... kernel:3fe0: b6ee928c be8a91a8 b6e31cec b6cf3ce0 600f0010 00000003 00000000 00000000
Message from syslogd@rpi3 at Oct 28 02:32:15 ... kernel:Code: f57ff04e ebebb419 e2453612 e59d2004 (e5c32000)
--
And here is what lands in dmesg buffer:
[ 616.047139] Unable to handle kernel paging request at virtual address fee0002e [ 616.054835] pgd = ec460000 [ 616.057715] [fee0002e] *pgd=00000000 [ 616.061526] Internal error: Oops: 805 [#1] SMP ARM [ 616.066611] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore drm_kms_helper drm brcmfmac hci_uart btbcm brcmutil fb_sys_fops btqca syscopyarea btintel sysfillrect cfg80211 sysimgblt bluetooth ecdh_generic rfkill bcm2835_thermal bcm2835_rng bcm2835_wdt leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 bcm2835 i2c_bcm2835 bcm2835_dma phy_generic [ 616.111895] CPU: 3 PID: 854 Comm: sensors-detect Tainted: G W 4.14.0-0.rc6.git2.1.fc28.armv7hl #1 [ 616.122489] Hardware name: Generic DT based system [ 616.127573] task: eeb18000 task.stack: ec642000 [ 616.132391] PC is at write_port+0x54/0xf8 [ 616.136648] LR is at write_port+0x4c/0xf8 [ 616.140903] pc : [<c082ddf0>] lr : [<c082dde8>] psr: 600f0013 [ 616.147551] sp : ec643ed0 ip : 00000000 fp : c0ed2f0c [ 616.153092] r10: 0219dffa r9 : ffffe000 r8 : 0000002e [ 616.158635] r7 : ec643f88 r6 : 0219e028 r5 : 0000002e r4 : 0219e028 [ 616.165555] r3 : fee0002e r2 : 000000aa r1 : 00000051 r0 : 00000000 [ 616.172477] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 616.180040] Control: 10c5383d Table: 2c46006a DAC: 00000051 [ 616.186132] Process sensors-detect (pid: 854, stack limit = 0xec642220) [ 616.193142] Stack: (0xec643ed0 to 0xec644000) [ 616.197768] 3ec0: 00000001 000000aa 00000001 ed8df7c0 [ 616.206441] 3ee0: c082dd9c 00000000 ec643f88 00000001 ec642000 00000000 0219e028 c052b0c0 [ 616.215113] 3f00: 00000000 00000001 600f0013 c12085f4 00000000 c03b7dc0 00000001 00000000 [ 616.223784] 3f20: 00000000 c04e5130 00000000 00000000 ee839e24 00000000 ffffe000 c052b334 [ 616.232457] 3f40: ed8df7c0 00000002 ed8df7c0 00000001 00000000 ec643f88 0219e028 c052b380 [ 616.241131] 3f60: ed8df7c0 0219e028 00000001 ed8df7c0 ed8df7c0 0219e028 00000001 c0308884 [ 616.249803] 3f80: ec642000 c052b550 0000002e 00000000 00000001 01e7b150 0217e1fc 00000004 [ 616.258475] 3fa0: 00000004 c03086c0 01e7b150 0217e1fc 00000003 0219e028 00000001 00000000 [ 616.283872] 3fc0: 01e7b150 0217e1fc 00000004 00000004 00000000 0217e208 0217e208 0219e028 [ 616.309327] 3fe0: b6ee928c be8a91a8 b6e31cec b6cf3ce0 600f0010 00000003 00000000 00000000 [ 616.334803] [<c082ddf0>] (write_port) from [<c052b0c0>] (__vfs_write+0x34/0x128) [ 616.359537] [<c052b0c0>] (__vfs_write) from [<c052b380>] (vfs_write+0xc0/0x194) [ 616.384154] [<c052b380>] (vfs_write) from [<c052b550>] (SyS_write+0x44/0x7c) [ 616.408456] [<c052b550>] (SyS_write) from [<c03086c0>] (ret_fast_syscall+0x0/0x28) [ 616.433215] Code: f57ff04e ebebb419 e2453612 e59d2004 (e5c32000) [ 616.456395] ---[ end trace fd6257e0866129e5 ]--- [ 693.238550] kworker/dying (33) used greatest stack depth: 4664 bytes left
--
Why it needs to be reported over abrt? I've removed those packages from my image trying to minimize size of the image.
Just had time to back to my RPi3. Latest kernel is OOPSing in bcm driver on boot:
-- [ 45.055586] ------------[ cut here ]------------ [ 45.060715] WARNING: CPU: 3 PID: 618 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 45.069913] bcm2835-dma 3f007000.dma: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c88300] [ 45.080352] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore drm_kms_helper drm brcmfmac hci_uart btbcm brcmutil fb_sys_fops btqca syscopyarea btintel sysfillrect cfg80211 sysimgblt bluetooth ecdh_generic rfkill bcm2835_thermal bcm2835_rng bcm2835_wdt leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 bcm2835 i2c_bcm2835 bcm2835_dma phy_generic [ 45.126296] CPU: 3 PID: 618 Comm: dhclient Not tainted 4.14.0-0.rc6.git2.1.fc28.armv7hl #1 [ 45.135100] Hardware name: Generic DT based system [ 45.140269] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 45.148545] [<c030d92c>] (show_stack) from [<c0b7cf90>] (dump_stack+0xa0/0xd8) [ 45.156768] [<c0b7cf90>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 45.164564] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 45.173010] [<c0353f44>] (warn_slowpath_fmt) from [<c0710258>] (debug_dma_assert_idle+0x148/0x1e0) [ 45.182983] [<c0710258>] (debug_dma_assert_idle) from [<c04e4b90>] (wp_page_copy+0xfc/0x640) [ 45.192353] [<c04e4b90>] (wp_page_copy) from [<c04e6660>] (do_wp_page+0x3a4/0x5ac) [ 45.200744] [<c04e6660>] (do_wp_page) from [<c04e99b8>] (handle_mm_fault+0xd28/0xde0) [ 45.209392] [<c04e99b8>] (handle_mm_fault) from [<c0b99580>] (do_page_fault+0x244/0x3b8) [ 45.218306] [<c0b99580>] (do_page_fault) from [<c0301348>] (do_DataAbort+0x40/0xc0) [ 45.226756] [<c0301348>] (do_DataAbort) from [<c0b98e60>] (__dabt_usr+0x40/0x60) [ 45.234939] Exception stack(0xed95dfb0 to 0xed95dff8) [ 45.240406] dfa0: 02291210 b6cced00 b6ccecf8 00000000 [ 45.249399] dfc0: 02291170 b6cce000 00000001 b6389010 b6fbba48 00000000 00000000 004fea78 [ 45.258446] dfe0: fbad2c84 bed5a9f8 00000000 b6bf29a4 60010010 ffffffff [ 45.265600] ---[ end trace fd6257e0866129e4 ]--- [ 45.270564] Mapped at: [ 45.273228] snd_pcm_lib_preallocate_pages1+0x54/0x180 [snd_pcm] [ 45.279818] dmaengine_pcm_new+0x184/0x1e4 [snd_soc_core] [ 45.285750] soc_new_pcm+0x39c/0x46c [snd_soc_core] [ 45.291120] snd_soc_register_card+0x9c8/0xcb8 [snd_soc_core] [ 45.297411] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] --
kloczek
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
On 28 October 2017 at 08:05, Peter Robinson pbrobinson@gmail.com wrote: [..]
It is not crash in user space. Execution of the user space binary sensors-detect is causing kernel space OOPS.
This is what is printed on the terminal on executing this program:
I don't believe sensors-detect should be used on the RPi, in fact on any ARM device as it's very much focused on servers/x86 and accessing things via DMI/SMbus and other pretty x86 methods, it uses rudimentary techniques to just bash random locations where there might be sensors.
What are you actually trying to achieve with it? The Pi OOTB has no onboard sensors of note, and the addons should likely be detected/accessed via GPIO or the IIO stack.
I don't believe that any binary provided by distribution packages should be able to generate OOPS :) Initializing sensors was part of my standard template system initialization after installation which I'm using on normal/prod systems. You can call it coincidence that I found it :)
PS. BTW sensors under Linux. At the moment it is total mess in Linux now. Thing like temp sensors are exposed over three completely independent kernel interfaces: hwmon, thermal and yet another one which I do not remember now. After man years of the development Linux still is decade if not more behind for example Solaris FMA.
kloczek
It is not crash in user space. Execution of the user space binary sensors-detect is causing kernel space OOPS.
This is what is printed on the terminal on executing this program:
I don't believe sensors-detect should be used on the RPi, in fact on any ARM device as it's very much focused on servers/x86 and accessing things via DMI/SMbus and other pretty x86 methods, it uses rudimentary techniques to just bash random locations where there might be sensors.
What are you actually trying to achieve with it? The Pi OOTB has no onboard sensors of note, and the addons should likely be detected/accessed via GPIO or the IIO stack.
I don't believe that any binary provided by distribution packages should be able to generate OOPS :)
Yep, that's a fair point, but also lmsensors is also "special" (IE garbage), I'll report it upstream but ultimately it's won't be fixed in the short term and I bet if you run lmsensors on most ARM devices you'll get another crash and I don't have the time or inclination to report them all upstream.
Initializing sensors was part of my standard template system initialization after installation which I'm using on normal/prod systems. You can call it coincidence that I found it :)
It's not the first time I've seen something like that from lmsensors, in the short term I suggest adding a check for arch and not doing lmsensors on ARM devices (tmon in the kernel-tools package works on most ARM devices for temp/thermal)
PS. BTW sensors under Linux. At the moment it is total mess in Linux now. Thing like temp sensors are exposed over three completely independent kernel interfaces: hwmon, thermal and yet another one which I do not remember now. After man years of the development Linux still is decade if not more behind for example Solaris FMA.
You're not telling me anything I don't already know. You actually miss at least one, I think I know of 5 interfaces, the one I think you're thinking of is IIO (Industrial I/O). I can so a massive rant on that, and when you then get into things like PWM, which should be part of the IIO framework, it goes even further. Most of the client libraries are absolute garbage, and there's even some that choose to re-implement all the already existing kernel space drivers in userspace and just use i2c/gpio kernel drivers to speak to them. I can rant on this for a long time....
On 28 October 2017 at 11:21, Peter Robinson pbrobinson@gmail.com wrote: [..]
I can rant on this for a long time....
It was not my intention to start the rant. We both can continue such talks .. Sorry my fault. I should not mention this.
Back to the subject of RPi3 and rawhide kernel I have another OOPS on latest kernel:
[ 52.448904] ------------[ cut here ]------------ [ 52.453927] WARNING: CPU: 3 PID: 748 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 52.463044] bcm2835-dma 3f007000.dma: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c479c0] [ 52.473433] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore hci_uart drm_kms_helper brcmfmac btbcm btqca drm btintel brcmutil bluetooth fb_sys_fops cfg80211 syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_wdt bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce sdhci_pltfm dwc2 udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 52.518818] CPU: 3 PID: 748 Comm: bash Not tainted 4.14.0-0.rc7.git2.1.fc28.armv7hl #1 [ 52.527208] Hardware name: Generic DT based system [ 52.532314] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 52.540530] [<c030d92c>] (show_stack) from [<c0b7d210>] (dump_stack+0xa0/0xd8) [ 52.548197] [<c0b7d210>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 52.555586] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 52.563526] [<c0353f44>] (warn_slowpath_fmt) from [<c07101d4>] (debug_dma_assert_idle+0x148/0x1e0) [ 52.573030] [<c07101d4>] (debug_dma_assert_idle) from [<c04e4b98>] (wp_page_copy+0xfc/0x640) [ 52.581982] [<c04e4b98>] (wp_page_copy) from [<c04e6668>] (do_wp_page+0x3a4/0x5ac) [ 52.590009] [<c04e6668>] (do_wp_page) from [<c04e99c0>] (handle_mm_fault+0xd28/0xde0) [ 52.598319] [<c04e99c0>] (handle_mm_fault) from [<c0b99800>] (do_page_fault+0x244/0x3b8) [ 52.606901] [<c0b99800>] (do_page_fault) from [<c0301348>] (do_DataAbort+0x40/0xc0) [ 52.615025] [<c0301348>] (do_DataAbort) from [<c0b990e0>] (__dabt_usr+0x40/0x60) [ 52.622865] Exception stack(0xedee7fb0 to 0xedee7ff8) [ 52.628227] 7fa0: 00fb1f88 00000000 00588464 01041420 [ 52.636899] 7fc0: 00000000 00fae738 00000000 ffffffff 005833e8 00000001 00000000 01024238 [ 52.645570] 7fe0: 00fb1f88 bebaf9c8 0050e1ec 004ac3c4 20030010 ffffffff [ 52.652646] ---[ end trace 9babae82f6635701 ]--- [ 52.657596] Mapped at: [ 52.660173] bcm2835_dma_create_cb_chain+0xb0/0x1f0 [bcm2835_dma] [ 52.666761] bcm2835_dma_prep_slave_sg+0xf0/0x25c [bcm2835_dma] [ 52.673103] bcm2835_request+0x324/0x490 [bcm2835] [ 52.678258] mmc_start_request+0x278/0x2bc [ 52.682677] mmc_start_areq+0x248/0x34c
I'm not asking to solve it asap but my posts are more only in context of what should I do (?). Should I ignore it because it is known issue and someone already working on it? Or should I open the Fedora ticket? Or should I report this to someone specific or some exact place?
kloczek
On Sun, Nov 5, 2017 at 6:50 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
On 28 October 2017 at 11:21, Peter Robinson pbrobinson@gmail.com wrote: [..]
I can rant on this for a long time....
It was not my intention to start the rant. We both can continue such talks .. Sorry my fault. I should not mention this.
Back to the subject of RPi3 and rawhide kernel I have another OOPS on latest kernel:
[ 52.448904] ------------[ cut here ]------------ [ 52.453927] WARNING: CPU: 3 PID: 748 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 52.463044] bcm2835-dma 3f007000.dma: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c479c0] [ 52.473433] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore hci_uart drm_kms_helper brcmfmac btbcm btqca drm btintel brcmutil bluetooth fb_sys_fops cfg80211 syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_wdt bcm2835_thermal bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce sdhci_pltfm dwc2 udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 52.518818] CPU: 3 PID: 748 Comm: bash Not tainted 4.14.0-0.rc7.git2.1.fc28.armv7hl #1 [ 52.527208] Hardware name: Generic DT based system [ 52.532314] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 52.540530] [<c030d92c>] (show_stack) from [<c0b7d210>] (dump_stack+0xa0/0xd8) [ 52.548197] [<c0b7d210>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 52.555586] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 52.563526] [<c0353f44>] (warn_slowpath_fmt) from [<c07101d4>] (debug_dma_assert_idle+0x148/0x1e0) [ 52.573030] [<c07101d4>] (debug_dma_assert_idle) from [<c04e4b98>] (wp_page_copy+0xfc/0x640) [ 52.581982] [<c04e4b98>] (wp_page_copy) from [<c04e6668>] (do_wp_page+0x3a4/0x5ac) [ 52.590009] [<c04e6668>] (do_wp_page) from [<c04e99c0>] (handle_mm_fault+0xd28/0xde0) [ 52.598319] [<c04e99c0>] (handle_mm_fault) from [<c0b99800>] (do_page_fault+0x244/0x3b8) [ 52.606901] [<c0b99800>] (do_page_fault) from [<c0301348>] (do_DataAbort+0x40/0xc0) [ 52.615025] [<c0301348>] (do_DataAbort) from [<c0b990e0>] (__dabt_usr+0x40/0x60) [ 52.622865] Exception stack(0xedee7fb0 to 0xedee7ff8) [ 52.628227] 7fa0: 00fb1f88 00000000 00588464 01041420 [ 52.636899] 7fc0: 00000000 00fae738 00000000 ffffffff 005833e8 00000001 00000000 01024238 [ 52.645570] 7fe0: 00fb1f88 bebaf9c8 0050e1ec 004ac3c4 20030010 ffffffff [ 52.652646] ---[ end trace 9babae82f6635701 ]--- [ 52.657596] Mapped at: [ 52.660173] bcm2835_dma_create_cb_chain+0xb0/0x1f0 [bcm2835_dma] [ 52.666761] bcm2835_dma_prep_slave_sg+0xf0/0x25c [bcm2835_dma] [ 52.673103] bcm2835_request+0x324/0x490 [bcm2835] [ 52.678258] mmc_start_request+0x278/0x2bc [ 52.682677] mmc_start_areq+0x248/0x34c
I'm not asking to solve it asap but my posts are more only in context of what should I do (?). Should I ignore it because it is known issue and someone already working on it? Or should I open the Fedora ticket? Or should I report this to someone specific or some exact place?
I'm not seeing anything like this on any of my RPi devices (2, 3 32 and 64 bit), the one crash I did see on one of them is resolved with rc8 and it unrelated to the above. So to start with we'll need a lot more information.
On 7 November 2017 at 10:43, Peter Robinson pbrobinson@gmail.com wrote: [..]
I'm not seeing anything like this on any of my RPi devices (2, 3 32 and 64 bit), the one crash I did see on one of them is resolved with rc8 and it unrelated to the above. So to start with we'll need a lot more information.
So I'm using my RPi3 on 32bit.
[root@rpi3 ~]# uname -m armv7l
kloczek
On Tue, Nov 7, 2017 at 10:49 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
On 7 November 2017 at 10:43, Peter Robinson pbrobinson@gmail.com wrote: [..]
I'm not seeing anything like this on any of my RPi devices (2, 3 32 and 64 bit), the one crash I did see on one of them is resolved with rc8 and it unrelated to the above. So to start with we'll need a lot more information.
So I'm using my RPi3 on 32bit.
[root@rpi3 ~]# uname -m armv7l
Sure, I have a PRi3 running 32 bit too but I'm not seeing it so we need more details. What image, what attached devices, what device the rootfs is on, when does it happen, when booting, when just runnning etc.
On 7 November 2017 at 10:51, Peter Robinson pbrobinson@gmail.com wrote: [..]
Sure, I have a PRi3 running 32 bit too but I'm not seeing it so we need more details. What image, what attached devices, what device the rootfs is on, when does it happen, when booting, when just runnning etc.
Raw RPi3 connected over eth port. It is fully updated rawhide image. Lat OOPS happens just on finish boot before even I'm eble to start login over ssh.
Except this OOPS it is couple of other issues or lines which looks a bit odd. Below is full corode dmesg output
[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Linux version 4.14.0-0.rc7.git4.1.fc28.armv7hl (mockbuild@buildvm-armv7-06.arm.fedoraproject.org) (gcc version 7.2.1 20170829 (Red Hat 7.2.1-1) (GCC)) #1 SMP Fri Nov 3 22:50:32 UTC 2017[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d[ 0.000000] CPU: div instructions available: patching division code[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B[ 0.000000] Memory policy: Data cache writealloc[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] cma: Reserved 64 MiB at 0x3a400000[ 0.000000] On node 0 totalpages: 255488[ 0.000000] free_area_init_node: node 0, pgdat c133f100, node_mem_map ef72f000[ 0.000000] Normal zone: 1728 pages used for memmap[ 0.000000] Normal zone: 0 pages reserved[ 0.000000] Normal zone: 196608 pages, LIFO batch:31[ 0.000000] HighMem zone: 58880 pages, LIFO batch:15[ 0.000000] random: fast init done[ 0.000000] percpu: Embedded 16 pages/cpu @ef6e1000 s35624 r8192 d21720 u65536[ 0.000000] pcpu-alloc: s35624 r8192 d21720 u65536 alloc=16*4096[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 253760[ 0.000000] Kernel command line: ro root=UUID=fe3e208c-3725-4574-a468-082e887e307a audit=0 selinux=0 LANG=en_US.UTF-8[ 0.000000] audit: disabled (until reboot)[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Memory: 902316K/1021952K available (8813K kernel code, 1428K rwdata, 3920K rodata, 2048K init, 8732K bss, 54100K reserved, 65536K cma-reserved, 169984K highmem)[ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0208000 - 0xc0b9b484 (9806 kB) .init : 0xc1000000 - 0xc1200000 (2048 kB) .data : 0xc1200000 - 0xc13651d4 (1429 kB) .bss : 0xc1370170 - 0xc1bf7424 (8733 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] ftrace: allocating 35976 entries in 71 pages[ 0.000000] Running RCU self tests[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU lockdep checking is enabled.[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.[ 0.000000] RCU callback double-/use-after-free debug enabled.[ 0.000000] Tasks RCU enabled.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns[ 0.000072] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns[ 0.000361] bcm2835: system timer (irq = 33)[ 0.002542] arch_timer*: WARNING: Invalid trigger for IRQ16, assuming level low*[ 0.002598] arch_timer*: WARNING: Please fix your firmware*[ 0.002649] arch_timer*: WARNING: Invalid trigger for IRQ17, assuming level low*[ 0.002667] arch_timer*: WARNING: Please fix your firmware*[ 0.002757] arch_timer: cp15 timer(s) running at 19.20MHz (phys).[ 0.002786] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns[ 0.002816] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns[ 0.002841] Switching to timer-based delay loop, resolution 52ns[ 0.004575] Console: colour dummy device 80x30[ 0.010037] console [tty0] enabled[ 0.010265] Lock dependency validator*: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar*[ 0.010407] ... MAX_LOCKDEP_SUBCLASSES*: 8*[ 0.010490] ... MAX_LOCK_DEPTH*: 48*[ 0.010574] ... MAX_LOCKDEP_KEYS*: 8191*[ 0.010661] ... CLASSHASH_SIZE*: 4096*[ 0.010748] ... MAX_LOCKDEP_ENTRIES*: 32768*[ 0.010835] ... MAX_LOCKDEP_CHAINS*: 65536*[ 0.010923] ... CHAINHASH_SIZE*: 32768*[ 0.011011] memory used by lock dependency info*: 4655 kB*[ 0.011148] per task-struct memory footprint*: 1536 bytes*[ 0.011254] kmemleak: Kernel memory leak detector disabled[ 0.013287] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)[ 0.013499] pid_max: default: 32768 minimum: 301[ 0.014401] Security Framework initialized[ 0.014495] Yama: becoming mindful.[ 0.014676] SELinux: Disabled at boot.[ 0.015203] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.015378] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.020803] CPU: Testing write buffer coherency: ok[ 0.023222] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000[ 0.025727] Setting up static identity map for 0x300000 - 0x3000a0[ 0.027737] Hierarchical SRCU implementation.[ 0.036619] EFI services will not be available.[ 0.038960] smp: Bringing up secondary CPUs ...[ 0.042952] arch_timer*: WARNING: Invalid trigger for IRQ16, assuming level low*[ 0.042962] arch_timer*: WARNING: Please fix your firmware*[ 0.042979] arch_timer*: WARNING: Invalid trigger for IRQ17, assuming level low*[ 0.042987] arch_timer*: WARNING: Please fix your firmware*[ 0.043013] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001[ 0.047582] arch_timer*: WARNING: Invalid trigger for IRQ16, assuming level low*[ 0.047592] arch_timer*: WARNING: Please fix your firmware*[ 0.047606] arch_timer*: WARNING: Invalid trigger for IRQ17, assuming level low*[ 0.047614] arch_timer*: WARNING: Please fix your firmware*[ 0.047640] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002[ 0.051219] arch_timer*: WARNING: Invalid trigger for IRQ16, assuming level low*[ 0.051229] arch_timer*: WARNING: Please fix your firmware*[ 0.051243] arch_timer*: WARNING: Invalid trigger for IRQ17, assuming level low*[ 0.051252] arch_timer*: WARNING: Please fix your firmware*[ 0.051276] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003[ 0.051791] smp: Brought up 1 node, 4 CPUs[ 0.054019] SMP: Total of 4 processors activated (153.60 BogoMIPS).[ 0.054159] CPU: All CPU(s) started in HYP mode.[ 0.054267] CPU: Virtualization extensions available.[ 0.061452] devtmpfs: initialized[ 0.092849] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4[ 0.110032] DMA-API: preallocated 4096 debug entries[ 0.110168] DMA-API: debugging enabled by kernel config[ 0.115953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns[ 0.116231] futex hash table entries: 1024 (order: 4, 65536 bytes)[ 0.123101] pinctrl core: initialized pinctrl subsystem[ 0.128301] DMI not present or invalid.[ 0.131078] NET: Registered protocol family 16[ 0.136824] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.151714] cpuidle: using governor menu[ 0.152895] No ATAGs?[ 0.153382] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.[ 0.153632] hw-breakpoint: maximum watchpoint size is 8 bytes.[ 0.156122] Serial: AMBA PL011 UART driver[ 0.167526] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_gpio32, deferring probe[ 0.247670] vgaarb: loaded[ 0.251484] SCSI subsystem initialized[ 0.252440] libata version 3.00 loaded.[ 0.253576] usbcore: registered new interface driver usbfs[ 0.254023] usbcore: registered new interface driver hub[ 0.254543] usbcore: registered new device driver usb[ 0.256572] EDAC MC: Ver: 3.0.0[ 0.258275] dmi: Firmware registration failed.[ 0.263614] NetLabel: Initializing[ 0.263713] NetLabel: domain hash size = 128[ 0.263818] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO[ 0.264379] NetLabel: unlabeled traffic allowed by default[ 0.266826] clocksource: Switched to clocksource arch_sys_counter[ 0.667138] VFS: Disk quotas dquot_6.6.0[ 0.667548] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.668705] simple-framebuffer 3e914000.framebuffer: framebuffer at 0x3e914000, 0x6d8c00 bytes, mapped to 0xf0880000[ 0.669016] simple-framebuffer 3e914000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296[ 0.722865] Console: switching to colour frame buffer device 228x61[ 0.769693] simple-framebuffer 3e914000.framebuffer: fb0: simplefb registered![ 0.818647] NET: Registered protocol family 2[ 0.823121] TCP established hash table entries: 8192 (order: 3, 32768 bytes)[ 0.823983] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)[ 0.828837] TCP: Hash tables configured (established 8192 bind 8192)[ 0.830030] UDP hash table entries: 512 (order: 3, 40960 bytes)[ 0.831068] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)[ 0.833490] NET: Registered protocol family 1[ 0.833911] PCI: CLS 0 bytes, default 64[ 0.836194] Unpacking initramfs...[ 3.615625] Freeing initrd memory: 18380K[ 3.619089] cryptomgr_test (50) used greatest stack depth: 6348 bytes left[ 3.619679] cryptomgr_test (51) used greatest stack depth: 6168 bytes left[ 3.622072] cryptomgr_test (53) used greatest stack depth: 5876 bytes left[ 3.624237] cryptomgr_test (55) used greatest stack depth: 5788 bytes left[ 3.626861] cryptomgr_test (57) used greatest stack depth: 5508 bytes left[ 3.628322] cryptomgr_test (58) used greatest stack depth: 5316 bytes left[ 3.639271] Initialise system trusted keyrings[ 3.640544] Key type blacklist registered[ 3.641457] workingset: timestamp_bits=14 max_order=18 bucket_order=4[ 3.674722] zbud: loaded[ 6.032533] NET: Registered protocol family 38[ 6.033190] Key type asymmetric registered[ 6.033592] Asymmetric key parser 'x509' registered[ 6.034369] bounce: pool size: 64 pages[ 6.035009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)[ 6.036394] io scheduler noop registered[ 6.046443] io scheduler deadline registered[ 6.057989] io scheduler cfq registered (default)[ 6.067869] io scheduler mq-deadline registered[ 6.084218] atomic64_test: passed[ 6.131032] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[ 6.213761] 3f215040.serial: ttyS1 at MMIO 0x0 (irq = 59, base_baud = 31250000) is a 16550[ 7.176898] console [ttyS1] enabled[ 7.195186] Serial: AMBA driver[ 7.210454] msm_serial: driver initialized[ 7.224818] STMicroelectronics ASC driver initialized[ 7.250712] libphy: Fixed MDIO Bus: probed[ 7.266160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 7.282663] ehci-pci: EHCI PCI platform driver[ 7.297033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 7.313285] ohci-pci: OHCI PCI platform driver[ 7.327937] uhci_hcd: USB Universal Host Controller Interface driver[ 7.345347] usbcore: registered new interface driver usbserial[ 7.361516] usbcore: registered new interface driver usbserial_generic[ 7.378663] usbserial: USB Serial support registered for generic[ 7.396200] mousedev: PS/2 mouse device common for all mice[ 7.420560] device-mapper: uevent: version 1.0.3[ 7.437426] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com[ 7.460095] ledtrig-cpu: registered to indicate activity on CPUs[ 7.476675] dmi-sysfs: dmi entry is absent.[ 7.492271] hidraw: raw HID events driver (C) Jiri Kosina[ 7.508887] usbcore: registered new interface driver usbhid[ 7.524977] usbhid: USB HID core driver[ 7.540915] bcm2835-mbox 3f00b880.mailbox: mailbox enabled[ 7.559130] drop_monitor: Initializing network drop monitor service[ 7.576927] ip_tables: (C) 2000-2006 Netfilter Core Team[ 7.594922] Initializing XFRM netlink socket[ 7.612468] NET: Registered protocol family 10[ 7.670363] Segment Routing with IPv6[ 7.684031] mip6: Mobile IPv6[ 7.696831] NET: Registered protocol family 17[ 7.711347] start plist test[ 7.720378] end plist test[ 7.720648] Registering SWP/SWPB emulation handler[ 7.892272] registered taskstats version 1[ 7.906094] Loading compiled-in X.509 certificates[ 8.470323] Loaded X.509 cert 'Fedora kernel signing key: 337d6da7ed4fb827dabed4bb5158ec2f6d1be7f5'[ 8.490906] zswap: loaded using pool lzo/zbud[ 8.547554] Key type big_key registered[ 8.598031] Key type encrypted registered[ 8.639955] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2[ 8.660575] serial serial0: tty port ttyAMA0 registered[ 8.682722] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-09-12 15:21[ 8.712174] hctosys: unable to open rtc device (rtc0)[ 8.728683] sr_init*: No PMIC hook to init smartreflex*[ 8.744956] sr_init: platform driver register failed for SR[ 8.779599] Freeing unused kernel memory: 2048K[ 8.795356] rodata_test: test data was not read only[ 8.892518] systemd[1]: System time before build time, advancing clock.[ 9.122869] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)[ 9.170567] systemd[1]: Detected architecture arm.[ 9.187123] systemd[1]: Running in initial RAM disk.[ 9.217467] systemd[1]: Set hostname to <rpi3>.[ 10.112690] systemd[1]: Reached target Swap.[ 10.157432] systemd[1]: Created slice System Slice.[ 10.182497] systemd[1]: Listening on Journal Socket (/dev/log).[ 10.210805] systemd[1]: Listening on udev Control Socket.[ 10.236607] systemd[1]: Listening on udev Kernel Socket.[ 10.261239] systemd[1]: Reached target Local File Systems.[ 14.041946] usb_phy_generic phy*: phy supply vcc not found, using dummy regulator*[ 14.238352] sdhci: Secure Digital Host Controller Interface driver[ 14.267603] sdhci: Copyright(c) Pierre Ossman[ 14.309051] sdhci-pltfm: SDHCI platform and OF driver helper[ 14.313647] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)[ 14.327955] i2c-bcm2835 3f805000.i2c*: Could not read clock-frequency property*[ 14.371146] OF: /soc/usb@7e980000: could not get #phy-cells for /phy[ 14.371261] dwc2 3f980000.usb*: 3f980000.usb supply vusb_d not found, using dummy regulator*[ 14.371846] dwc2 3f980000.usb*: 3f980000.usb supply vusb_a not found, using dummy regulator*[ 14.431471] mmc0*: host does not support reading read-only switch, assuming write-enable*[ 14.434501] dwc2 3f980000.usb: DWC OTG Controller[ 14.453687] mmc0: new high speed SDHC card at address 1234[ 14.462969] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1[ 14.463345] dwc2 3f980000.usb: irq 39, io mem 0x3f980000[ 14.466587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 14.466664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 14.466680] usb usb1: Product: DWC OTG Controller[ 14.466692] usb usb1: Manufacturer: Linux 4.14.0-0.rc7.git4.1.fc28.armv7hl dwc2_hsotg[ 14.466704] usb usb1: SerialNumber: 3f980000.usb[ 14.508664] hub 1-0:1.0: USB hub found[ 14.512094] hub 1-0:1.0: 1 port detected[ 14.754256] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO[ 14.801134] mmc1*: queuing unknown CIS tuple 0x80 (2 bytes)*[ 14.803341] mmc1*: queuing unknown CIS tuple 0x80 (3 bytes)*[ 14.805568] mmc1*: queuing unknown CIS tuple 0x80 (3 bytes)*[ 14.809531] mmc1*: queuing unknown CIS tuple 0x80 (7 bytes)*[ 14.908020] usb 1-1: new high-speed USB device number 2 using dwc2[ 14.924324] mmcblk0: mmc0:1234 SA08G 7.21 GiB [ 14.965999] mmcblk0: p1 p2 p3 p4[ 15.090009] mmc1: new high speed SDIO card at address 0001[ 15.125011] usb 1-1: New USB device found, idVendor=0424, idProduct=9514[ 15.125042] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 15.133454] hub 1-1:1.0: USB hub found[ 15.134692] hub 1-1:1.0: 5 ports detected[ 15.452900] usb 1-1.1: new high-speed USB device number 3 using dwc2[ 15.574603] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00[ 15.596020] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 15.684654] smsc95xx v1.0.6[ 15.685936] usb 1-1.2: new low-speed USB device number 4 using dwc2[ 15.782697] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2003[ 15.802560] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 15.816815] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e9:2e:56[ 15.818444] usbcore: registered new interface driver smsc95xx[ 15.864444] usb 1-1.2: Product: Dell USB Keyboard[ 15.880911] usb 1-1.2: Manufacturer: Dell[ 15.922493] input: Dell Dell USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2003.0001/input/input0[ 16.016608] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-3f980000.usb-1.2/input0[ 16.130943] usb 1-1.4: new full-speed USB device number 5 using dwc2[ 16.158011] systemd-udevd (301) used greatest stack depth: 4888 bytes left[ 16.236964] usb 1-1.4: device descriptor read/64, error -32[ 16.419922] usb 1-1.4: device descriptor read/64, error -32[ 16.619925] usb 1-1.4: new full-speed USB device number 6 using dwc2[ 16.718896] usb 1-1.4: device descriptor read/64, error -32[ 16.808308] random: crng init done[ 16.922977] usb 1-1.4: device descriptor read/64, error -32[ 17.008615] SGI XFS with ACLs, security attributes, no debug enabled[ 17.073946] XFS (mmcblk0p4): Mounting V5 Filesystem[ 17.117899] usb 1-1.4: new full-speed USB device number 7 using dwc2[ 17.549906] usb 1-1.4: device not accepting address 7, error -32[ 17.645970] usb 1-1.4: new full-speed USB device number 8 using dwc2[ 18.078852] usb 1-1.4: device not accepting address 8, error -32[ 18.098552] usb 1-1-port4: unable to enumerate USB device[ 19.968439] XFS (mmcblk0p4): Ending clean mount[ 24.921035] systemd-journald[192]: Received SIGTERM from PID 1 (systemd).[ 25.545725] systemd*: 14 output lines suppressed due to ratelimiting*[ 26.258966] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.[ 30.638846] systemd-journald[439]: Received request to flush runtime journal from PID 1[ 30.687533] systemd-journald[439]*: File /var/log/journal/d7cbff58904d4319b43ac10e354ae2bb/system.journal corrupted or uncleanly shut down, renaming and replacing.*[ 37.261100] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer[ 38.231009] bcm2835-rng 3f104000.rng: hwrng registered[ 38.373498] Bluetooth: Core ver 2.22[ 38.409911] NET: Registered protocol family 31[ 38.450425] Bluetooth: HCI device and connection manager initialized[ 38.451080] Bluetooth: HCI socket layer initialized[ 38.451113] Bluetooth: L2CAP socket layer initialized[ 38.451551] Bluetooth: SCO socket layer initialized[ 38.507983] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001[ 38.509645] usbcore: registered new interface driver brcmfmac[ 38.624561] brcmfmac mmc1:0001:1*: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2*[ 38.782682] Adding 499708k swap on /dev/mmcblk0p3. Priority:-2 extents:1 across:499708k SSFS[ 38.864270] Bluetooth: HCI UART driver ver 2.3[ 38.935166] Bluetooth: HCI UART protocol H4 registered[ 38.935178] Bluetooth: HCI UART protocol BCSP registered[ 38.937065] Bluetooth: HCI UART protocol LL registered[ 38.937076] Bluetooth: HCI UART protocol ATH3K registered[ 38.937084] Bluetooth: HCI UART protocol Three-wire (H5) registered[ 38.937607] Bluetooth: HCI UART protocol Intel registered[ 38.942018] uart-pl011 3f201000.serial: no DMA platform data[ 38.947446] Bluetooth: HCI UART protocol Broadcom registered[ 38.947456] Bluetooth: HCI UART protocol QCA registered[ 38.947465] Bluetooth: HCI UART protocol AG6XX registered[ 38.947474] Bluetooth: HCI UART protocol Marvell registered[ 38.978574] INFO*: trying to register non-static key.*[ 38.978581] *the code is fine but needs lockdep annotation.*[ 38.978585] *turning off the locking correctness validator.*[ 38.978605] CPU*: 2 PID: 496 Comm: kworker/u9:1 Not tainted 4.14.0-0.rc7.git4.1.fc28.armv7hl #1*[ 38.978611] Hardware name*: Generic DT based system*[ 38.978992] Workqueue*: hci0 hci_cmd_work [bluetooth]*[ 38.979032] *[<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c)*[ 38.979054] *[<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8)*[ 38.979075] *[<c0b7d4f0>] (dump_stack) from [<c03b2be8>] (register_lock_class+0x298/0x514)*[ 38.979101] *[<c03b2be8>] (register_lock_class) from [<c03b5d08>] (__lock_acquire+0xe4/0x1698)*[ 38.979127] *[<c03b5d08>] (__lock_acquire) from [<c03b7dc0>] (lock_acquire+0x280/0x2dc)*[ 38.979151] *[<c03b7dc0>] (lock_acquire) from [<c0b987b4>] (_raw_read_lock+0x4c/0x5c)*[ 38.979260] *[<c0b987b4>] (_raw_read_lock) from [<bf68d03c>] (hci_uart_tx_wakeup+0x1c/0x98 [hci_uart])*[ 38.979431] *[<bf68d03c>] (hci_uart_tx_wakeup [hci_uart]) from [<bf68e0e0>] (hci_uart_send_frame+0x54/0x6c [hci_uart])*[ 38.979851] *[<bf68e0e0>] (hci_uart_send_frame [hci_uart]) from [<bf3d5260>] (hci_send_frame+0xc8/0xf4 [bluetooth])*[ 38.980460] *[<bf3d5260>] (hci_send_frame [bluetooth]) from [<bf3d5334>] (hci_cmd_work+0xa8/0x124 [bluetooth])*[ 38.980774] *[<bf3d5334>] (hci_cmd_work [bluetooth]) from [<c0373434>] (process_one_work+0x43c/0x83c)*[ 38.980793] *[<c0373434>] (process_one_work) from [<c0374c2c>] (worker_thread+0x2a8/0x428)*[ 38.980812] *[<c0374c2c>] (worker_thread) from [<c037a934>] (kthread+0x14c/0x168)*[ 38.980833] *[<c037a934>] (kthread) from [<c0308768>] (ret_from_fork+0x14/0x2c)*[ 39.094965] Bluetooth: hci0: BCM: chip id 94[ 39.095499] Bluetooth: hci0: BCM: features 0x2e[ 39.312787] Registered IR keymap rc-cec[ 39.313221] rc rc0: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0[ 39.313701] input: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0/input1[ 39.351791] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok[ 39.351817] vc4_hdmi 3f902000.hdmi*: ASoC: no DMI vendor name!*[ 39.354152] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])[ 39.354538] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])[ 39.354692] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])[ 39.355303] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])[ 39.355725] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])[ 39.356182] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])[ 39.388520] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])[ 39.388540] checking generic (3e914000 6d8c00) vs hw (0 ffffffff)[ 39.388546] fb: switching to vc4drmfb from simple[ 39.689313] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50[ 39.874372] Console: switching to colour dummy device 80x30[ 39.895881] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0[ 39.902804] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 39.909660] [drm] Driver supports precise vblank timestamp query.[ 39.969521] Console: switching to colour frame buffer device 240x67[ 40.045057] vc4-drm soc:gpu: fb0: frame buffer device[ 40.690853] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50[ 41.133851] Bluetooth: hci0 command 0x0c14 tx timeout[ 41.374653] systemd-udevd (479) used greatest stack depth: 4864 bytes left[ 41.450665] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)[ 44.328652] *------------[ cut here ]------------*[ 44.344230] WARNING*: CPU: 0 PID: 558 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0*[ 44.363982] vc4-drm soc:gpu*: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00cba800]*[ 44.363995] Modules linked in*: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd soundcore drm_kms_helper hci_uart btbcm drm btqca btintel brcmfmac fb_sys_fops syscopyarea brcmutil sysfillrect bluetooth sysimgblt cfg80211 ecdh_generic rfkill bcm2835_thermal bcm2835_rng bcm2835_wdt leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 udc_core sdhci_pltfm sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic*[ 44.364311] CPU*: 0 PID: 558 Comm: gdbus Not tainted 4.14.0-0.rc7.git4.1.fc28.armv7hl #1*[ 44.364318] Hardware name*: Generic DT based system*[ 44.364355] *[<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c)*[ 44.364373] *[<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8)*[ 44.364394] *[<c0b7d4f0>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104)*[ 44.364411] *[<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c)*[ 44.364432] *[<c0353f44>] (warn_slowpath_fmt) from [<c0710264>] (debug_dma_assert_idle+0x148/0x1e0)*[ 44.364459] *[<c0710264>] (debug_dma_assert_idle) from [<c04e4bf8>] (wp_page_copy+0xfc/0x640)*[ 44.364476] *[<c04e4bf8>] (wp_page_copy) from [<c04e66c8>] (do_wp_page+0x3a4/0x5ac)*[ 44.364491] *[<c04e66c8>] (do_wp_page) from [<c04e9a20>] (handle_mm_fault+0xd28/0xde0)*[ 44.364508] *[<c04e9a20>] (handle_mm_fault) from [<c0b99b00>] (do_page_fault+0x244/0x3b8)*[ 44.364526] *[<c0b99b00>] (do_page_fault) from [<c0301348>] (do_DataAbort+0x40/0xc0)*[ 44.364543] *[<c0301348>] (do_DataAbort) from [<c0b993e0>] (__dabt_usr+0x40/0x60)*[ 44.364550] *Exception stack(0xc3301fb0 to 0xc3301ff8)*[ 44.364561] 1fa0*: b4800010 00000040 00021000 00017600*[ 44.364575] 1fc0*: b4800010 00000040 b67e6000 b6a70618 00017600 00000008 b4809a00 00000046*[ 44.364587] 1fe0*: b4800010 b46fea38 b6713494 b671075c 00010010 ffffffff*[ 44.364624] *---[ end trace 2b6c3c1a48114025 ]---*[ 44.364639] *Mapped at:*[ 44.364787] * drm_fbdev_cma_create+0x64/0x268 [drm_kms_helper]*[ 44.364965] * __drm_fb_helper_initial_config_and_unlock+0x274/0x35c [drm_kms_helper]*[ 44.365100] * drm_fbdev_cma_init_with_funcs+0xb8/0xf4 [drm_kms_helper]*[ 44.365193] * vc4_kms_load+0xd4/0x10c [vc4]*[ 44.365277] * vc4_drm_bind+0xec/0x130 [vc4]*[ 45.304212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 45.363718] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup[ 46.882561] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1[ 49.133935] Bluetooth: hci0: BCM: Reading local name failed (-110)
Fragments which IMO looks a bit odd:
[ 0.258275] dmi: Firmware registration failed.
[ 0.002542] arch_timer*: WARNING: Invalid trigger for IRQ16, assuming level low*[ 0.002598] arch_timer*: WARNING: Please fix your firmware*[ 0.002649] arch_timer*: WARNING: Invalid trigger for IRQ17, assuming level low*[ 0.002667] arch_timer*: WARNING: Please fix your firmware*
As far as I know RPi3 has no firmware ..
kloczek
On Tue, Nov 7, 2017 at 11:12 AM, Tomasz Kłoczko kloczko.tomasz@gmail.com wrote:
On 7 November 2017 at 10:51, Peter Robinson pbrobinson@gmail.com wrote: [..]
Sure, I have a PRi3 running 32 bit too but I'm not seeing it so we need more details. What image, what attached devices, what device the rootfs is on, when does it happen, when booting, when just runnning etc.
Raw RPi3 connected over eth port. It is fully updated rawhide image. Lat OOPS happens just on finish boot before even I'm eble to start login over ssh.
Except this OOPS it is couple of other issues or lines which looks a bit odd. Below is full corode dmesg output
Please trim and just include appropriate bits, really don't need a full boot log for 6 lines...
Fragments which IMO looks a bit odd:
Why do they look odd?
[ 0.258275] dmi: Firmware registration failed.
aarch64 supports DMI, the RPi doesn't have it, how is that odd, it's a spurious at best and can probably provide a better error message but it doesn't stop anything from working. If you want to engage with upstream kernel to make it better feel free!
[ 0.002542] arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low [ 0.002598] arch_timer: WARNING: Please fix your firmware [ 0.002649] arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low [ 0.002667] arch_timer: WARNING: Please fix your firmware
As far as I know RPi3 has no firmware ..
Yes, it does, numerous in fact, the GPU runs firmware which boots the ARM cores, which boots u-boot (which as far as the kernel is concerned is also a firmware), there's even a kernel driver which explicitly communicates with the raspberry pi firmware via a mailbox mechanism:
[ 4.518103] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-09-12 15:21
Ultimately what exactly is your query about the above in relationship to the crash that you're seeing?
On 7 November 2017 at 11:30, Peter Robinson pbrobinson@gmail.com wrote: [..]
[ 4.518103] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-09-12 15:21
Ultimately what exactly is your query about the above in relationship to the crash that you're seeing?
OK I've updated formware
[root@rpi3 ~]# dmesg| grep firm [ 0.002603] arch_timer: WARNING: Please fix your firmware [ 0.002673] arch_timer: WARNING: Please fix your firmware [ 0.043045] arch_timer: WARNING: Please fix your firmware [ 0.043069] arch_timer: WARNING: Please fix your firmware [ 0.047818] arch_timer: WARNING: Please fix your firmware [ 0.047840] arch_timer: WARNING: Please fix your firmware [ 0.051337] arch_timer: WARNING: Please fix your firmware [ 0.051359] arch_timer: WARNING: Please fix your firmware [ 8.673136] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-11 23:24 [ 41.226979] bluetooth hci0: Direct firmware load for brcm/BCM43430A1.hcd failed with error -2 [ 41.253337] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2
and now I see even more issues. First one is generally related to fedora upgrade process as looks like none of the packages post installation scripts takes care of upgrade files on firs vfat patition.
[ 42.778651] ------------[ cut here ]------------ [ 42.778801] WARNING: CPU: 2 PID: 512 at drivers/gpu/drm/drm_atomic_helper.c:1240 drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper] [ 42.778808] [CRTC:67:crtc-2] vblank wait timed out [ 42.778812] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd hci_uart soundcore btbcm brcmfmac btqca drm_kms_helper brcmutil btintel drm cfg80211 fb_sys_fops bluetooth syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_thermal bcm2835_wdt bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 42.779032] CPU: 2 PID: 512 Comm: setfont Not tainted 4.14.0-0.rc7.git4.1.fc28.armv7hl #1 [ 42.779038] Hardware name: Generic DT based system [ 42.779070] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 42.779088] [<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8) [ 42.779106] [<c0b7d4f0>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 42.779120] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 42.779251] [<c0353f44>] (warn_slowpath_fmt) from [<bf60d414>] (drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper]) [ 42.779459] [<bf60d414>] (drm_atomic_helper_wait_for_vblanks [drm_kms_helper]) from [<bf7d3b5c>] (vc4_atomic_complete_commit+0x78/0xb0 [vc4]) [ 42.779607] [<bf7d3b5c>] (vc4_atomic_complete_commit [vc4]) from [<bf7d3cc0>] (vc4_atomic_commit+0x12c/0x140 [vc4]) [ 42.779803] [<bf7d3cc0>] (vc4_atomic_commit [vc4]) from [<bf611210>] (restore_fbdev_mode_atomic+0x88/0x1a0 [drm_kms_helper]) [ 42.780049] [<bf611210>] (restore_fbdev_mode_atomic [drm_kms_helper]) from [<bf613c74>] (drm_fb_helper_pan_display+0x98/0x178 [drm_kms_helper]) [ 42.780184] [<bf613c74>] (drm_fb_helper_pan_display [drm_kms_helper]) from [<c0781f3c>] (fb_pan_display+0xf4/0x130) [ 42.780204] [<c0781f3c>] (fb_pan_display) from [<c078f39c>] (bit_update_start+0x1c/0x38) [ 42.780219] [<c078f39c>] (bit_update_start) from [<c078e560>] (fbcon_switch+0x3b4/0x46c) [ 42.780236] [<c078e560>] (fbcon_switch) from [<c0803668>] (redraw_screen+0x104/0x1d8) [ 42.780252] [<c0803668>] (redraw_screen) from [<c078de80>] (fbcon_do_set_font+0x1e8/0x1f8) [ 42.780267] [<c078de80>] (fbcon_do_set_font) from [<c078e164>] (fbcon_set_font+0x1e8/0x230) [ 42.780282] [<c078e164>] (fbcon_set_font) from [<c080760c>] (con_font_op+0x1a8/0x4b0) [ 42.780300] [<c080760c>] (con_font_op) from [<c07fbf8c>] (vt_ioctl+0x1668/0x16fc) [ 42.780317] [<c07fbf8c>] (vt_ioctl) from [<c07ee6e4>] (tty_ioctl+0x9c0/0xa78) [ 42.780336] [<c07ee6e4>] (tty_ioctl) from [<c053e670>] (vfs_ioctl+0x28/0x3c) [ 42.780355] [<c053e670>] (vfs_ioctl) from [<c053e8b0>] (do_vfs_ioctl+0x9c/0x968) [ 42.780371] [<c053e8b0>] (do_vfs_ioctl) from [<c053f1d4>] (SyS_ioctl+0x58/0x74) [ 42.780389] [<c053f1d4>] (SyS_ioctl) from [<c0308848>] (__sys_trace_return+0x0/0x10) [ 42.780439] ---[ end trace 16203403a1285e5f ]--- [ 43.308252] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 53.231795] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:67:crtc-2] flip_done timed out [ 53.419618] ------------[ cut here ]------------ [ 53.419764] WARNING: CPU: 2 PID: 35 at drivers/gpu/drm/drm_atomic_helper.c:1240 drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper] [ 53.419771] [CRTC:67:crtc-2] vblank wait timed out [ 53.419775] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd hci_uart soundcore btbcm brcmfmac btqca drm_kms_helper brcmutil btintel drm cfg80211 fb_sys_fops bluetooth syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_thermal bcm2835_wdt bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 53.419998] CPU: 2 PID: 35 Comm: kworker/2:1 Tainted: G W 4.14.0-0.rc7.git4.1.fc28.armv7hl #1 [ 53.420004] Hardware name: Generic DT based system [ 53.420132] Workqueue: events output_poll_execute [drm_kms_helper] [ 53.420168] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 53.420186] [<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8) [ 53.420204] [<c0b7d4f0>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 53.420219] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 53.420352] [<c0353f44>] (warn_slowpath_fmt) from [<bf60d414>] (drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper]) [ 53.420559] [<bf60d414>] (drm_atomic_helper_wait_for_vblanks [drm_kms_helper]) from [<bf7d3b5c>] (vc4_atomic_complete_commit+0x78/0xb0 [vc4]) [ 53.420706] [<bf7d3b5c>] (vc4_atomic_complete_commit [vc4]) from [<bf7d3cc0>] (vc4_atomic_commit+0x12c/0x140 [vc4]) [ 53.420901] [<bf7d3cc0>] (vc4_atomic_commit [vc4]) from [<bf611210>] (restore_fbdev_mode_atomic+0x88/0x1a0 [drm_kms_helper]) [ 53.421151] [<bf611210>] (restore_fbdev_mode_atomic [drm_kms_helper]) from [<bf613b44>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x4c/0x80 [drm_kms_helper]) [ 53.421399] [<bf613b44>] (drm_fb_helper_restore_fbdev_mode_unlocked [drm_kms_helper]) from [<bf613bcc>] (drm_fb_helper_set_par+0x54/0x64 [drm_kms_helper]) [ 53.421645] [<bf613bcc>] (drm_fb_helper_set_par [drm_kms_helper]) from [<bf613ae8>] (drm_fb_helper_hotplug_event+0xbc/0xcc [drm_kms_helper]) [ 53.421891] [<bf613ae8>] (drm_fb_helper_hotplug_event [drm_kms_helper]) from [<bf6058d8>] (output_poll_execute+0x174/0x188 [drm_kms_helper]) [ 53.422024] [<bf6058d8>] (output_poll_execute [drm_kms_helper]) from [<c0373434>] (process_one_work+0x43c/0x83c) [ 53.422040] [<c0373434>] (process_one_work) from [<c0374c2c>] (worker_thread+0x2a8/0x428) [ 53.422058] [<c0374c2c>] (worker_thread) from [<c037a934>] (kthread+0x14c/0x168) [ 53.422077] [<c037a934>] (kthread) from [<c0308768>] (ret_from_fork+0x14/0x2c) [ 53.422122] ---[ end trace 16203403a1285e60 ]--- [ 55.021252] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 63.471883] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:67:crtc-2] flip_done timed out [ 63.749762] ------------[ cut here ]------------ [ 63.749914] WARNING: CPU: 2 PID: 573 at drivers/gpu/drm/drm_atomic_helper.c:1240 drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper] [ 63.749921] [CRTC:67:crtc-2] vblank wait timed out [ 63.749926] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd hci_uart soundcore btbcm brcmfmac btqca drm_kms_helper brcmutil btintel drm cfg80211 fb_sys_fops bluetooth syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_thermal bcm2835_wdt bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 63.750154] CPU: 2 PID: 573 Comm: (agetty) Tainted: G W 4.14.0-0.rc7.git4.1.fc28.armv7hl #1 [ 63.750159] Hardware name: Generic DT based system [ 63.750193] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 63.750212] [<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8) [ 63.750231] [<c0b7d4f0>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 63.750246] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 63.750378] [<c0353f44>] (warn_slowpath_fmt) from [<bf60d414>] (drm_atomic_helper_wait_for_vblanks+0xe0/0x1f4 [drm_kms_helper]) [ 63.750585] [<bf60d414>] (drm_atomic_helper_wait_for_vblanks [drm_kms_helper]) from [<bf7d3b5c>] (vc4_atomic_complete_commit+0x78/0xb0 [vc4]) [ 63.750733] [<bf7d3b5c>] (vc4_atomic_complete_commit [vc4]) from [<bf7d3cc0>] (vc4_atomic_commit+0x12c/0x140 [vc4]) [ 63.750929] [<bf7d3cc0>] (vc4_atomic_commit [vc4]) from [<bf611210>] (restore_fbdev_mode_atomic+0x88/0x1a0 [drm_kms_helper]) [ 63.751178] [<bf611210>] (restore_fbdev_mode_atomic [drm_kms_helper]) from [<bf613c74>] (drm_fb_helper_pan_display+0x98/0x178 [drm_kms_helper]) [ 63.751318] [<bf613c74>] (drm_fb_helper_pan_display [drm_kms_helper]) from [<c0781f3c>] (fb_pan_display+0xf4/0x130) [ 63.751339] [<c0781f3c>] (fb_pan_display) from [<c078f39c>] (bit_update_start+0x1c/0x38) [ 63.751356] [<c078f39c>] (bit_update_start) from [<c078e560>] (fbcon_switch+0x3b4/0x46c) [ 63.751373] [<c078e560>] (fbcon_switch) from [<c0803668>] (redraw_screen+0x104/0x1d8) [ 63.751388] [<c0803668>] (redraw_screen) from [<c0803860>] (csi_J+0x124/0x144) [ 63.751403] [<c0803860>] (csi_J) from [<c0806824>] (do_con_write+0xf90/0x1b5c) [ 63.751418] [<c0806824>] (do_con_write) from [<c0807450>] (con_write+0x14/0x28) [ 63.751436] [<c0807450>] (con_write) from [<c07f10f4>] (n_tty_write+0x29c/0x414) [ 63.751453] [<c07f10f4>] (n_tty_write) from [<c07ee9e4>] (tty_write+0x248/0x2b0) [ 63.751471] [<c07ee9e4>] (tty_write) from [<c052b16c>] (__vfs_write+0x34/0x128) [ 63.751489] [<c052b16c>] (__vfs_write) from [<c052b42c>] (vfs_write+0xc0/0x194) [ 63.751504] [<c052b42c>] (vfs_write) from [<c052b5fc>] (SyS_write+0x44/0x7c) [ 63.751521] [<c052b5fc>] (SyS_write) from [<c03086c0>] (ret_fast_syscall+0x0/0x28) [ 63.751585] ---[ end trace 16203403a1285e61 ]--- [ 64.077086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 64.130912] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 65.649152] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 70.706859] systemd-journald[449]: File /var/log/journal/d7cbff58904d4319b43ac10e354ae2bb/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 74.224048] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:67:crtc-2] flip_done timed out [ 76.743467] ------------[ cut here ]------------ [ 76.748467] WARNING: CPU: 1 PID: 757 at lib/dma-debug.c:614 debug_dma_assert_idle+0x148/0x1e0 [ 76.757571] dwc2 3f980000.usb: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00c47040] [ 76.767289] Modules linked in: rc_cec vc4 snd_soc_core ac97_bus snd_pcm_dmaengine cec rc_core snd_pcm snd_timer snd hci_uart soundcore btbcm brcmfmac btqca drm_kms_helper brcmutil btintel drm cfg80211 fb_sys_fops bluetooth syscopyarea sysfillrect sysimgblt ecdh_generic rfkill bcm2835_thermal bcm2835_wdt bcm2835_rng leds_gpio xfs libcrc32c smsc95xx usbnet mii mmc_block sdhci_iproc crc32_arm_ce dwc2 sdhci_pltfm udc_core sdhci pwm_bcm2835 i2c_bcm2835 bcm2835 bcm2835_dma phy_generic [ 76.812678] CPU: 1 PID: 757 Comm: grepconf.sh Tainted: G W 4.14.0-0.rc7.git4.1.fc28.armv7hl #1 [ 76.822995] Hardware name: Generic DT based system [ 76.828097] [<c0313154>] (unwind_backtrace) from [<c030d92c>] (show_stack+0x18/0x1c) [ 76.836320] [<c030d92c>] (show_stack) from [<c0b7d4f0>] (dump_stack+0xa0/0xd8) [ 76.843997] [<c0b7d4f0>] (dump_stack) from [<c0353ee8>] (__warn+0xe4/0x104) [ 76.851392] [<c0353ee8>] (__warn) from [<c0353f44>] (warn_slowpath_fmt+0x3c/0x4c) [ 76.859341] [<c0353f44>] (warn_slowpath_fmt) from [<c0710264>] (debug_dma_assert_idle+0x148/0x1e0) [ 76.868857] [<c0710264>] (debug_dma_assert_idle) from [<c04e4bf8>] (wp_page_copy+0xfc/0x640) [ 76.877820] [<c04e4bf8>] (wp_page_copy) from [<c04e66c8>] (do_wp_page+0x3a4/0x5ac) [ 76.885861] [<c04e66c8>] (do_wp_page) from [<c04e9a20>] (handle_mm_fault+0xd28/0xde0) [ 76.894176] [<c04e9a20>] (handle_mm_fault) from [<c0b99b00>] (do_page_fault+0x244/0x3b8) [ 76.902772] [<c0b99b00>] (do_page_fault) from [<c0301348>] (do_DataAbort+0x40/0xc0) [ 76.910908] [<c0301348>] (do_DataAbort) from [<c0b993e0>] (__dabt_usr+0x40/0x60) [ 76.918752] Exception stack(0xedf97fb0 to 0xedf97ff8) [ 76.924116] 7fa0: 00000001 005823e8 00000a08 00000000 [ 76.932788] 7fc0: 00000001 00589c70 0058fd44 00589d6c 00000000 004ea5fc 005823e8 00000000 [ 76.941462] 7fe0: befaef34 befaf070 004a518c 004e9f30 80010010 ffffffff [ 76.948554] ---[ end trace 16203403a1285e62 ]--- [ 76.953505] Mapped at: [ 76.956156] dwc2_driver_probe+0x3f8/0x4cc [dwc2] [ 76.961217] platform_drv_probe+0x58/0xa4 [ 76.983951] driver_probe_device+0x294/0x42c [ 77.006665] __driver_attach+0x90/0x100 [ 77.028658] bus_for_each_dev+0x84/0x94
kloczek