2017-05-23 1:06 GMT+02:00 Andrew Gillis andrew@vortexbox.org:

I am using an imx6 SoM from SolidRun. We have purchased a large number of these and mostly they work fine.

I tried to update to Fedora 25 and now a few of them won't boot. (most work fine)

All my SoMs are all supposed to be the same but some must be different. Both worked fine with an older version of Fedora

Is there any way to just force a boot from MMC1 with no checks?

I tried to update to the u-boot from Fedora 26 just to see if that would help. It does not.

This is what I get with the "bad" ones

U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from unknown boot device SPL: Unsupported Boot Device! SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###

The ones that boot correctly do this

U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from MMC1

U-Boot 2016.09.01 (Oct 19 2016 - 14:40:29 +0000)

CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 28C Reset cause: POR Board: MX6 Hummingboard DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment

It means that it's using the default environment because no custom env was ever saved. try (on the devices that do not boot) resetenv savenv

So it means that you probably need to report the problem to u-boot upstream as a normal u-boot binary should discover the right boot device without additional tweak. Or do you have a link to the report ?

2017-05-23 21:26 GMT+02:00 Andrew Gillis andrew@vortexbox.org:

Thanks that didn't work but it turns out the new version of u-boot doesn't work correctly if the SRC_SBMR1 value is not set. The old version figured it out somehow.

I modified u-boot to always boot from the MMC and now it works fine. Thanks for your help.

-Andrew

On Tue, May 23, 2017 at 3:06 AM, Nicolas Chauvet kwizart@gmail.com wrote:

...

2017-05-23 1:06 GMT+02:00 Andrew Gillis andrew@vortexbox.org:

...

I am using an imx6 SoM from SolidRun. We have purchased a large number of these and mostly they work fine.

I tried to update to Fedora 25 and now a few of them won't boot. (most work fine)

All my SoMs are all supposed to be the same but some must be different. Both worked fine with an older version of Fedora

Is there any way to just force a boot from MMC1 with no checks?

I tried to update to the u-boot from Fedora 26 just to see if that would help. It does not.

This is what I get with the "bad" ones

U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from unknown boot device SPL: Unsupported Boot Device! SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###

The ones that boot correctly do this

U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from MMC1

U-Boot 2016.09.01 (Oct 19 2016 - 14:40:29 +0000)

CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 28C Reset cause: POR Board: MX6 Hummingboard DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment

It means that it's using the default environment because no custom env was ever saved. try (on the devices that do not boot) resetenv savenv

--

Nicolas (kwizart)

-- Andrew Gillis Small Green Computer 603-488-0617