Hi Ken,
----- Original Message -----
the cat list says it is supported but the target is not fornd
If you could give some more detail- which image, version of the installer and command you are using?
Thanks, Paul
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
$ sudo arm-image-installer --image=Fedora-Xfce-armhfp-29-1.2-sda.raw.xz --target=orangepi_prime --media=/dev/sdc
I got
===================================================== = Selected Image: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = To: /dev/sdc .... 0+638450 records in 0+638450 records out 5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1994.96 s, 2.8 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': No such file or directory = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': No such file or directory
= Installation Complete! Insert into the orangepi_prime and boot.
TIA I hope hope this helps note: I have been able to get my RPI 3 Model B running from this Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
Hi Ken,
----- Original Message -----
$ sudo arm-image-installer --image=Fedora-Xfce-armhfp-29-1.2-sda.raw.xz --target=orangepi_prime --media=/dev/sdc
I got
===================================================== = Selected Image: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime =====================================================
******** WARNING! ALL DATA WILL BE DESTROYED ********
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = To: /dev/sdc .... 0+638450 records in 0+638450 records out 5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1994.96 s, 2.8 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': No such file or directory = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': No such file or directory
= Installation Complete! Insert into the orangepi_prime and boot.
TIA I hope hope this helps note: I have been able to get my RPI 3 Model B running from this Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
The Orange Pi prime looks to be an aarch64 device (Cortex-A53), so you will want one of the aarch64 disk images from:
https://alt.fedoraproject.org/alt/
Paul
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Paul what does this meanin cleaning what?? TIA
===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdc .... 0+1037692 records in 0+1037692 records out 11811160064 bytes (12 GB, 11 GiB) copied, 2154.94 s, 5.5 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': Structure needs cleaning = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': Structure needs cleaning
= Installation Complete! Insert into the orangepi_prime and boot.
Paul what does this meanin cleaning what??
Can you rephrase that sentence as I have no idea what you're asking.
The OrangePi Prime is a 64 bit device and as a result we only support running 64 bit images on it, the XFCE image you tries to write out is armhfp and is hence 32 bit, we don't support that on aarch64 (arm64) devices.
Peter
TIA
===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime =====================================================
******** WARNING! ALL DATA WILL BE DESTROYED ********
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdc .... 0+1037692 records in 0+1037692 records out 11811160064 bytes (12 GB, 11 GiB) copied, 2154.94 s, 5.5 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': Structure needs cleaning = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': Structure needs cleaning
= Installation Complete! Insert into the orangepi_prime and boot. _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Thanks Peter
What does
= Writing sunxi-spl.bin for orangepi_prime .... > dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': Structure needs cleaning > = Writing u-boot FIT image for orangepi_prime .... > dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': Structure needs cleaning
mean? What structure needs cleaning and how do you do it?
TIA ken
On Tue, Dec 11, 2018 at 12:33 AM ken soup ken@bcdapps.com wrote:
Thanks Peter
What does
= Writing sunxi-spl.bin for orangepi_prime .... > dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': Structure needs cleaning > = Writing u-boot FIT image for orangepi_prime .... > dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': Structure needs cleaning
mean? What structure needs cleaning and how do you do it?
No idea TBH, it's an error from dd
$ sudo arm-image-installer --image=Fedora-Xfce-armhfp-29-1.2-sda.raw.xz --target=orangepi_prime --media=/dev/sdc
I got
===================================================== = Selected Image: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = To: /dev/sdc .... 0+638450 records in 0+638450 records out 5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1994.96 s, 2.8 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': No such file or directory = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': No such file or directory
= Installation Complete! Insert into the orangepi_prime and boot.
TIA I hope hope this helps note: I have been able to get my RPI 3 Model B running from this Fedora-Xfce-armhfp-29-1.2-sda.raw.xz
===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdd = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1038205 records in 0+1038205 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1997.52 s, 5.9 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime.
= Installation Complete! Insert into the orangepi_prime and boot.
How do I get U-Boot files??
TIA(Thanks In Advance) ken
===================================================== = Selected Image: = Fedora-Xfce-armhfp-Rawhide-20181216.n.1-sda.raw.xz = Selected Media : /dev/sdd = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Xfce-armhfp-Rawhide-20181216.n.1-sda.raw.xz = To: /dev/sdd .... 0+620228 records in 0+620228 records out 5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1342.59 s, 4.1 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime.
= Installation Complete! Insert into the orangepi_prime and boot.
Not in Rawhide either TIA ken
= Fedora-Xfce-armhfp-Rawhide-20181216.n.1-sda.raw.xz
= Writing image complete! = No U-Boot files found for orangepi_prime.
= Installation Complete! Insert into the orangepi_prime and boot.
Not in Rawhide either
That's a 32 bit image with 64 bit hardware, I wouldn't expect it there.
The aarch64 Workstation image should have the orangepi_prime, for both F29 and rawhide, but the thing to note is that none of the AllWinner devices have accelerated graphics so I'm not sure you want to be running Workstation on it.
Peter Where might find aarch64 *.xz sda image?? for rawhide??
FC29_1.2 does NOT have orangepi_prime
Type 'YES' to proceed, anything else to exit now = Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1038205 records in 0+1038205 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1997.52 s, 5.9 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime. = Installation Complete! Insert into the orangepi_prime and boot. TIA ken
Ken,
Peter Where might find aarch64 *.xz sda image?? for rawhide??
We produce Workstaion, Server and Minimal for aarch64, for all the Spins it's up to the Spins maintainers to request they get added for a particular architecture and for the Spins maintainers to assist in supporting them. I would suggest you reach out to the maintainer of which ever spin you prefer.
FC29_1.2 does NOT have orangepi_prime
There's no need to yell...
Fedora 29 GA, AKA the 1.2 you refer to above shipped with uboot-tools-2018.09-1.fc29 which has in the uboot-images-armv8-2018.09-1.fc29 sub package the following 64 bit Orange Pi models: orangepi_one_plus orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2
In fact initial upstream U-Boot support for this device landed in May 2017.
Type 'YES' to proceed, anything else to exit now = Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1038205 records in 0+1038205 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1997.52 s, 5.9 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime. = Installation Complete! Insert into the orangepi_prime and boot.
It works just fine for me:
# arm-image-installer --image=Fedora-Workstation-29-1.2.aarch64.raw.xz --target=orangepi_prime --media=/dev/sdb ===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdb = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdb .... 0+909233 records in 0+909233 records out 11811160064 bytes (12 GB, 11 GiB) copied, 865.543 s, 13.6 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... 4+0 records in 4+0 records out 32768 bytes (33 kB, 32 KiB) copied, 0.00203287 s, 16.1 MB/s = Writing u-boot FIT image for orangepi_prime .... 72+1 records in 72+1 records out 597064 bytes (597 kB, 583 KiB) copied, 0.0474322 s, 12.6 MB/s
= Installation Complete! Insert into the orangepi_prime and boot.
A question, do you have a local install of uboot bits ("rpm -qa | grep uboot") on the device which you're running arm-image-installer from? If so what version, what version of arm-image-installer?
[ken@localhost ~]$ rpm -qa | grep uboot uboot-images-armv8-2018.09-1.fc29.noarch uboot-tools-2018.09-1.fc29.x86_64 uboot-images-armv7-2018.09-1.fc29.noarch
===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdd = U-Boot Target : orangepi_prime =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** *****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1029538 records in 0+1029538 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1973.72 s, 6.0 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime.
= Installation Complete! Insert into the orangepi_prime and boot. [root@localhost ken]# arm-image-installer --version arm-image-installer-2.10
why is your records out different than mine = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdb .... 0+909233 records in 0+909233 records out
TIA