Hi, I'm trying out the fedora-arm(*rootfs-f12.tar.bz2*) over qemu using the * zImage-versatile-2.6.24-rc7.armv5tel* available at the fedora-arm site. During the boot process, the *system stops at the console asking for a login *. Something like:
*Fedora release 12 (Constantine) Kernel 2.6.24-rc7 on an armv5tel (tty1) Fedora login: * The GUI does NOT start. How do i proceed to login to the system?
During the boot process i observed the following error as well - "Starting Udev: modprobe: FATAL: Could not load /lib/modules/2.6.24-rc7/moodules.dep No such file or directory"
I'm launching QEMU with(running as root): *#qemu-system-arm -M versatilepb -kernel zImage-versatile-2.6.24-rc7.armv5tel -hdc rootfs-f12-dev -append root="0800" -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup.sh *
My host is a 32 bit F12.
Any pointers will be really helpful.
TIA, Indro
..snip...
On Sun, 2009-12-06 at 05:49 -0800, Indraneel Mukherjee wrote:
Hi, I'm trying out the fedora-arm(rootfs-f12.tar.bz2) over qemu using the zImage-versatile-2.6.24-rc7.armv5tel available at the fedora-arm site. During the boot process, the system stops at the console asking for a login. Something like:
Fedora release 12 (Constantine) Kernel 2.6.24-rc7 on an armv5tel (tty1) Fedora login:
Here is where you enter the default username/password :-) (root/fedoraarm)
The GUI does NOT start. How do i proceed to login to the system?
It won't. The default rootfs is not bundled with X/desktop environment.
During the boot process i observed the following error as well - "Starting Udev: modprobe: FATAL: Could not load /lib/modules/2.6.24-rc7/moodules.dep No such file or directory"
That is not a fatal error. You don't have your kernel modules installed in the rfs.
Jitesh
I'm launching QEMU with(running as root): #qemu-system-arm -M versatilepb -kernel zImage-versatile-2.6.24-rc7.armv5tel -hdc rootfs-f12-dev -append root="0800" -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup.sh
My host is a 32 bit F12.
Any pointers will be really helpful.
TIA, Indro
Thanks Jitesh. I did find the password on the fedora-arm site but after sending out the sos mail :(
Indro
On Mon, Dec 7, 2009 at 10:51 AM, Jitesh Shah jiteshs@marvell.com wrote:
..snip...
On Sun, 2009-12-06 at 05:49 -0800, Indraneel Mukherjee wrote:
Hi, I'm trying out the fedora-arm(rootfs-f12.tar.bz2) over qemu using the zImage-versatile-2.6.24-rc7.armv5tel available at the fedora-arm site. During the boot process, the system stops at the console asking for a login. Something like:
Fedora release 12 (Constantine) Kernel 2.6.24-rc7 on an armv5tel (tty1) Fedora login:
Here is where you enter the default username/password :-) (root/fedoraarm)
The GUI does NOT start. How do i proceed to login to the system?
It won't. The default rootfs is not bundled with X/desktop environment.
During the boot process i observed the following error as well - "Starting Udev: modprobe: FATAL: Could not load /lib/modules/2.6.24-rc7/moodules.dep No such file or directory"
That is not a fatal error. You don't have your kernel modules installed in the rfs.
Jitesh
I'm launching QEMU with(running as root): #qemu-system-arm -M versatilepb -kernel zImage-versatile-2.6.24-rc7.armv5tel -hdc rootfs-f12-dev -append root="0800" -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup.sh
My host is a 32 bit F12.
Any pointers will be really helpful.
TIA, Indro
-
Indraneel Mukherjee -
Jitesh Shah