11 a.m.
So I spent a bit of time today getting beta-1.
First thing I did after logging in was to run 'yum update' It is hung
during cleanup. Here is where it stopped:
Cleanup :
firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
Cleanup :
firewalld-0.3.11-3.fc21.noarch 78/121
[ 1541.629825] Ebtables v2.0 unregistered
[ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1543.652587] Ebtables v2.0 registered
Cleanup :
libselinux-utils-2.3-4.fc21.armv7hl 79/121
Cleanup :
libselinux-python-2.3-4.fc21.armv7hl 80/121
Cleanup :
man-db-2.6.7.1-8.fc21.armv7hl 81/121
Cleanup :
initial-setup-0.3.23-2.fc21.armv7hl 82/121
I did the yum update from the serial console. I am also logged in via
ssh if there is some other information you want to see...
12:20 p.m.
On 10/24/2014 12:00 PM, Robert Moskowitz wrote:
So I spent a bit of time today getting beta-1.
First thing I did after logging in was to run 'yum update' It is hung
during cleanup. Here is where it stopped:
Cleanup :
firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
Cleanup :
firewalld-0.3.11-3.fc21.noarch 78/121
[ 1541.629825] Ebtables v2.0 unregistered
[ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1543.652587] Ebtables v2.0 registered
Cleanup :
libselinux-utils-2.3-4.fc21.armv7hl 79/121
Cleanup :
libselinux-python-2.3-4.fc21.armv7hl 80/121
Cleanup :
man-db-2.6.7.1-8.fc21.armv7hl 81/121
Cleanup :
initial-setup-0.3.23-2.fc21.armv7hl 82/121
I did the yum update from the serial console. I am also logged in via
ssh if there is some other information you want to see...
I did a <ctl-c> on the yum update and got:
Cleanup :
initial-setup-0.3.23-2.fc21.armv7hl 82/121
warning: %postun(initial-setup-0.3.23-2.fc21.armv7hl) scriptlet failed,
signal 2
Non-fatal POSTUN scriptlet failure in rpm package
initial-setup-0.3.23-2.fc21.armv7hl
12:52 p.m.
----- Original Message -----
So I spent a bit of time today getting beta-1.
Thanks very much for testing!
First thing I did after logging in was to run 'yum update' It is hung
during cleanup. Here is where it stopped:
Cleanup :
firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
Cleanup :
firewalld-0.3.11-3.fc21.noarch 78/121
[ 1541.629825] Ebtables v2.0 unregistered
[ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1543.652587] Ebtables v2.0 registered
Cleanup :
libselinux-utils-2.3-4.fc21.armv7hl 79/121
Cleanup :
libselinux-python-2.3-4.fc21.armv7hl 80/121
Cleanup :
man-db-2.6.7.1-8.fc21.armv7hl 81/121
Cleanup :
initial-setup-0.3.23-2.fc21.armv7hl 82/121
I did the yum update from the serial console. I am also logged in via
ssh if there is some other information you want to see...
Which image did you download? Did you complete initial-setup when the
system was booted for the first time? Updates worked okay on the minimal
image. KDE is in progress now.
Paul
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm
1:05 p.m.
On 10/24/2014 01:52 PM, Paul Whalen wrote:
----- Original Message -----
> So I spent a bit of time today getting beta-1.
Thanks very much for testing!
> First thing I did after logging in was to run 'yum update' It is hung
> during cleanup. Here is where it stopped:
>
> Cleanup :
> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
> Cleanup :
> firewalld-0.3.11-3.fc21.noarch 78/121
> [ 1541.629825] Ebtables v2.0 unregistered
> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 1543.652587] Ebtables v2.0 registered
> Cleanup :
> libselinux-utils-2.3-4.fc21.armv7hl 79/121
> Cleanup :
> libselinux-python-2.3-4.fc21.armv7hl 80/121
> Cleanup :
> man-db-2.6.7.1-8.fc21.armv7hl 81/121
> Cleanup :
> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>
> I did the yum update from the serial console. I am also logged in via
> ssh if there is some other information you want to see...
Which image did you download? Did you complete initial-setup when the
system was booted for the first time? Updates worked okay on the minimal
image. KDE is in progress now.
Minimal; see the subject line for what image I used.
This is on my Cubietruck and during setup, I did not setup my userid,
only using root this time.
Once I got logged in and checked that the MACaddr was the same as the
last build, I did the yum update (after checking that the repos would be
f21).
I only have 2 more hours of work, and then it is off and away for three
weeks. I may take the c2 with me.
1:45 p.m.
----- Original Message -----
On 10/24/2014 01:52 PM, Paul Whalen wrote:
>
> ----- Original Message -----
>> So I spent a bit of time today getting beta-1.
> Thanks very much for testing!
>
>> First thing I did after logging in was to run 'yum update' It is hung
>> during cleanup. Here is where it stopped:
>>
>> Cleanup :
>> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
>> Cleanup :
>> firewalld-0.3.11-3.fc21.noarch 78/121
>> [ 1541.629825] Ebtables v2.0 unregistered
>> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 1543.652587] Ebtables v2.0 registered
>> Cleanup :
>> libselinux-utils-2.3-4.fc21.armv7hl 79/121
>> Cleanup :
>> libselinux-python-2.3-4.fc21.armv7hl 80/121
>> Cleanup :
>> man-db-2.6.7.1-8.fc21.armv7hl 81/121
>> Cleanup :
>> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>>
>> I did the yum update from the serial console. I am also logged in via
>> ssh if there is some other information you want to see...
> Which image did you download? Did you complete initial-setup when the
> system was booted for the first time? Updates worked okay on the minimal
> image. KDE is in progress now.
Minimal; see the subject line for what image I used.
Oops!
This is on my Cubietruck and during setup, I did not setup my userid,
only using root this time.
I completed initial-setup including user creation, but it shouldn't
matter.
Once I got logged in and checked that the MACaddr was the same as the
last build, I did the yum update (after checking that the repos would be
f21).
I rebooted prior to updating. I have seen issues in the past with initial-setup
updates when it was still running in the background. I'll try again without
rebooting.
I only have 2 more hours of work, and then it is off and away for
three
weeks. I may take the c2 with me.
Enjoy!
Paul
1:28 a.m.
On Fri, Oct 24, 2014 at 01:52:28PM -0400, Paul Whalen wrote:
----- Original Message -----
> So I spent a bit of time today getting beta-1.
Thanks very much for testing!
>
> First thing I did after logging in was to run 'yum update' It is hung
> during cleanup. Here is where it stopped:
>
> Cleanup :
> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
> Cleanup :
> firewalld-0.3.11-3.fc21.noarch 78/121
> [ 1541.629825] Ebtables v2.0 unregistered
> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 1543.652587] Ebtables v2.0 registered
> Cleanup :
> libselinux-utils-2.3-4.fc21.armv7hl 79/121
> Cleanup :
> libselinux-python-2.3-4.fc21.armv7hl 80/121
> Cleanup :
> man-db-2.6.7.1-8.fc21.armv7hl 81/121
> Cleanup :
> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>
> I did the yum update from the serial console. I am also logged in via
> ssh if there is some other information you want to see...
Which image did you download? Did you complete initial-setup when the
system was booted for the first time?
This seems impossible when using only serial console. Can't we just
ditch initial-setup? I don't think I've ever run it on an ARM box,
but one of my boxes always starts it on an unseen display.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
1:47 a.m.
On 25 October 2014 14:28:50 GMT+08:00, "Richard W.M. Jones"
<rjones(a)redhat.com> wrote:
On Fri, Oct 24, 2014 at 01:52:28PM -0400, Paul Whalen wrote:
>
>
> ----- Original Message -----
> > So I spent a bit of time today getting beta-1.
>
> Thanks very much for testing!
>
> >
> > First thing I did after logging in was to run 'yum update' It is
hung
> > during cleanup. Here is where it stopped:
> >
> > Cleanup :
> > firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
> > Cleanup :
> > firewalld-0.3.11-3.fc21.noarch 78/121
> > [ 1541.629825] Ebtables v2.0 unregistered
> > [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536
max)
> > [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 1543.652587] Ebtables v2.0 registered
> > Cleanup :
> > libselinux-utils-2.3-4.fc21.armv7hl 79/121
> > Cleanup :
> > libselinux-python-2.3-4.fc21.armv7hl 80/121
> > Cleanup :
> > man-db-2.6.7.1-8.fc21.armv7hl 81/121
> > Cleanup :
> > initial-setup-0.3.23-2.fc21.armv7hl 82/121
> >
> > I did the yum update from the serial console. I am also logged in
via
> > ssh if there is some other information you want to see...
>
> Which image did you download? Did you complete initial-setup when the
> system was booted for the first time?
This seems impossible when using only serial console. Can't we just
ditch initial-setup? I don't think I've ever run it on an ARM box,
but one of my boxes always starts it on an unseen display.
Today I tried the Fedora 21 alpha, it gave me the "firstboot" menu on serial
console.
And it's useful, because otherwise you're into editing /etc/shadow so you can
login from serial console.
But it did not resize my partition either.
However you can do it by hand without needing a reboot...
-Andy
Rich.
--
Richard Jones, Virtualization Group, Red Hat
http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm
4:58 a.m.
On Sat, Oct 25, 2014 at 02:47:39PM +0800, Andy Green wrote:
Today I tried the Fedora 21 alpha, it gave me the
"firstboot" menu
on serial console.
That's good. It didn't happen on the Cubie when I tried Fedora 21
about 1 month ago, but it could have been fixed.
And it's useful, because otherwise you're into editing
/etc/shadow
so you can login from serial console.
Indeed that's a pain. Most other distros start with some standard
root password or known account - not super secure, but convenient.
BTW I used this command to fix mine on the Cubie:
# virt-customize --root-password password:123456 -a /dev/sdX
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
6:31 a.m.
On 25 October 2014 17:58:33 GMT+08:00, "Richard W.M. Jones"
<rjones(a)redhat.com> wrote:
On Sat, Oct 25, 2014 at 02:47:39PM +0800, Andy Green wrote:
> Today I tried the Fedora 21 alpha, it gave me the "firstboot" menu
> on serial console.
That's good. It didn't happen on the Cubie when I tried Fedora 21
about 1 month ago, but it could have been fixed.
It's gradually getting within sight of the whole thing being turnkey for a bunch of
common boards, which will be a great achievement for a single mmc image.
But I think balancing supporting the individual boards without tying up too much time
better spent elsewhere or trying to replace the work of the board community will be a bit
of a challenge.
> And it's useful, because otherwise you're into editing
/etc/shadow
> so you can login from serial console.
Indeed that's a pain. Most other distros start with some standard
root password or known account - not super secure, but convenient.
BTW I used this command to fix mine on the Cubie:
# virt-customize --root-password password:123456 -a /dev/sdX
Nice trick thanks I never heard of it.
-Andy
Rich.
6:33 a.m.
On 10/25/2014 02:47 AM, Andy Green wrote:
On 25 October 2014 14:28:50 GMT+08:00, "Richard W.M. Jones"
<rjones(a)redhat.com> wrote:
> On Fri, Oct 24, 2014 at 01:52:28PM -0400, Paul Whalen wrote:
>>
>> ----- Original Message -----
>>> So I spent a bit of time today getting beta-1.
>> Thanks very much for testing!
>>
>>> First thing I did after logging in was to run 'yum update' It is
> hung
>>> during cleanup. Here is where it stopped:
>>>
>>> Cleanup :
>>> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
>>> Cleanup :
>>> firewalld-0.3.11-3.fc21.noarch 78/121
>>> [ 1541.629825] Ebtables v2.0 unregistered
>>> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536
> max)
>>> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
>>> [ 1543.652587] Ebtables v2.0 registered
>>> Cleanup :
>>> libselinux-utils-2.3-4.fc21.armv7hl 79/121
>>> Cleanup :
>>> libselinux-python-2.3-4.fc21.armv7hl 80/121
>>> Cleanup :
>>> man-db-2.6.7.1-8.fc21.armv7hl 81/121
>>> Cleanup :
>>> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>>>
>>> I did the yum update from the serial console. I am also logged in
> via
>>> ssh if there is some other information you want to see...
>> Which image did you download? Did you complete initial-setup when the
>> system was booted for the first time?
> This seems impossible when using only serial console. Can't we just
> ditch initial-setup? I don't think I've ever run it on an ARM box,
> but one of my boxes always starts it on an unseen display.
Today I tried the Fedora 21 alpha, it gave me the "firstboot" menu on serial
console.
And it's useful, because otherwise you're into editing /etc/shadow so you can
login from serial console.
But it did not resize my partition either.
However you can do it by hand without needing a reboot...
Can you please provide the command to do this?
6:41 a.m.
>>>> So I spent a bit of time today getting beta-1.
>>>
>>> Thanks very much for testing!
>>>
>>>> First thing I did after logging in was to run 'yum update' It
is
>>
>> hung
>>>>
>>>> during cleanup. Here is where it stopped:
>>>>
>>>> Cleanup :
>>>> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
>>>> Cleanup :
>>>> firewalld-0.3.11-3.fc21.noarch 78/121
>>>> [ 1541.629825] Ebtables v2.0 unregistered
>>>> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536
>>
>> max)
>>>>
>>>> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
>>>> [ 1543.652587] Ebtables v2.0 registered
>>>> Cleanup :
>>>> libselinux-utils-2.3-4.fc21.armv7hl 79/121
>>>> Cleanup :
>>>> libselinux-python-2.3-4.fc21.armv7hl 80/121
>>>> Cleanup :
>>>> man-db-2.6.7.1-8.fc21.armv7hl 81/121
>>>> Cleanup :
>>>> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>>>>
>>>> I did the yum update from the serial console. I am also logged in
>>
>> via
>>>>
>>>> ssh if there is some other information you want to see...
>>>
>>> Which image did you download? Did you complete initial-setup when the
>>> system was booted for the first time?
>>
>> This seems impossible when using only serial console. Can't we just
>> ditch initial-setup? I don't think I've ever run it on an ARM box,
>> but one of my boxes always starts it on an unseen display.
>
> Today I tried the Fedora 21 alpha, it gave me the "firstboot" menu on
> serial console.
>
> And it's useful, because otherwise you're into editing /etc/shadow so you
> can login from serial console.
>
> But it did not resize my partition either.
>
> However you can do it by hand without needing a reboot...
Can you please provide the command to do this?
resize2fs
6:51 a.m.
On 10/26/2014 07:41 AM, Peter Robinson wrote:
>>>>> So I spent a bit of time today getting beta-1.
>>>> Thanks very much for testing!
>>>>
>>>>> First thing I did after logging in was to run 'yum update'
It is
>>> hung
>>>>> during cleanup. Here is where it stopped:
>>>>>
>>>>> Cleanup :
>>>>> firewalld-config-standard-0.3.11-3.fc21.noarch 77/121
>>>>> Cleanup :
>>>>> firewalld-0.3.11-3.fc21.noarch 78/121
>>>>> [ 1541.629825] Ebtables v2.0 unregistered
>>>>> [ 1543.420638] nf_conntrack version 0.5.0 (16384 buckets, 65536
>>> max)
>>>>> [ 1543.481335] ip6_tables: (C) 2000-2006 Netfilter Core Team
>>>>> [ 1543.652587] Ebtables v2.0 registered
>>>>> Cleanup :
>>>>> libselinux-utils-2.3-4.fc21.armv7hl 79/121
>>>>> Cleanup :
>>>>> libselinux-python-2.3-4.fc21.armv7hl 80/121
>>>>> Cleanup :
>>>>> man-db-2.6.7.1-8.fc21.armv7hl 81/121
>>>>> Cleanup :
>>>>> initial-setup-0.3.23-2.fc21.armv7hl 82/121
>>>>>
>>>>> I did the yum update from the serial console. I am also logged in
>>> via
>>>>> ssh if there is some other information you want to see...
>>>> Which image did you download? Did you complete initial-setup when the
>>>> system was booted for the first time?
>>> This seems impossible when using only serial console. Can't we just
>>> ditch initial-setup? I don't think I've ever run it on an ARM box,
>>> but one of my boxes always starts it on an unseen display.
>> Today I tried the Fedora 21 alpha, it gave me the "firstboot" menu on
>> serial console.
>>
>> And it's useful, because otherwise you're into editing /etc/shadow so
you
>> can login from serial console.
>>
>> But it did not resize my partition either.
>>
>> However you can do it by hand without needing a reboot...
>
> Can you please provide the command to do this?
resize2fs
thanks. I will read up on it and add it to my 'steps' document. Got to
be better than the current gparted process I am currently using.
6:41 a.m.
On Sun, Oct 26, 2014 at 07:33:45AM -0400, Robert Moskowitz wrote:
Can you please provide the command to do this?
One way is:
virt-resize <the-image-file> /dev/sdX --expand /dev/sdaN
You have to set X == the USB device, and N == the partition in the
image that you want to expand. This command will copy the image file
to the USB device as well.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
3467
days inactive
3469
days old
12 comments
5 participants
participants (5)
-
Andy Green -
Paul Whalen -
Peter Robinson -
Richard W.M. Jones -
Robert Moskowitz