10:40 p.m.
I just got a chance to test the 4.16.0-0.rc2 kernel using the 20180220
Xfce Rawhide Spin. It fails to boot due to a kernel paging request.
Here are the snippets:
U-Boot 2018.03-rc2 (Feb 16 2018 - 14:14:52 +0000) for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default
environment
Failed (-5)
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc_init: -5, time 6
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
591 bytes read in 14 ms (41 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Xfce-armhfp-Rawhide-20180220.n.0 Boot Options.
1: Fedora-Xfce-armhfp-Rawhide-20180220.n.0
(4.16.0-0.rc2.git0.1.fc28.armv7hl)
Enter choice: 1: Fedora-Xfce-armhfp-Rawhide-20180220.n.0
(4.16.0-0.rc2.git0.1.fc28.armv7hl)
Retrieving file: /initramfs-4.16.0-0.rc2.git0.1.fc28.armv7hl.img
54271696 bytes read in 4082 ms (12.7 MiB/s)
Retrieving file: /vmlinuz-4.16.0-0.rc2.git0.1.fc28.armv7hl
6660608 bytes read in 519 ms (12.2 MiB/s)
append: ro root=UUID=7d9c6236-7437-49c9-9e30-cf5ba8d147d5 cma=192MB
Retrieving file:
/dtb-4.16.0-0.rc2.git0.1.fc28.armv7hl/exynos5422-odroidxu4.dtb
56970 bytes read in 508 ms (109.4 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x65a200 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cc3e000, end 4ffffed0 ... OK
Loading Device Tree to 4cc2d000, end 4cc3de89 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.16.0-0.rc2.git0.1.fc28.armv7hl
(mockbuild(a)buildvm-armv7-07.arm.fedoraproject.org) (gcc version
8.0.1 20180218 8
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
.
.
.
[ 6.366866] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq =
61, base_baud = 0) is a S3C6400/10
[ 6.377630] msm_serial: driver initialized
[ 6.380655] STMicroelectronics ASC driver initialized
[ 6.390013] libphy: Fixed MDIO Bus: probed
[ 6.393299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 6.399194] ehci-pci: EHCI PCI platform driver
[ 6.403631] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.409762] ohci-pci: OHCI PCI platform driver
[ 6.414203] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.420729] usbcore: registered new interface driver
usbserial_generic
[ 6.427020] usbserial: USB Serial support registered for generic
[ 6.433186] mousedev: PS/2 mouse device common for all mice
[ 6.445564] device-mapper: uevent: version 1.0.3
[ 6.449213] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20)
initialised: dm-devel(a)redhat.com
[ 6.461297] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.466198] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.471445] usbcore: registered new interface driver usbhid
[ 6.476783] usbhid: USB HID core driver
[ 6.483709] drop_monitor: Initializing network drop monitor service
[ 6.489025] Initializing XFRM netlink socket
[ 6.493716] NET: Registered protocol family 10
[ 8.028149] Unable to handle kernel paging request at virtual
address fffffffc
Stewart
On 02/22/2018 12:01 PM, Peter Robinson wrote:
On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels
<searider74(a)gmail.com> wrote:
>
> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels <searider74(a)gmail.com>
>> wrote:
>>> Hi Peter,
>>>
>>> I just got a chance to update my Odroid Xu4 with the latest updates for
>>> F27.
>>> All was working fine with the exceptions for the Exynos 5 USB-3 issues
>>> prior
>>> to this upgrade. After the upgrade and a reboot, my system no longer
>>> boots
>>> into graphics mode. It seems to be failing somewhere along the line with
>>> udev, but I am not certain of this. The system will eventually boot into
>>> non-graphics mode, which can be seen when connecting the serial port and
>>> watching the boot messages.
>>>
>>> As I mentioned in previous posts, the Rawhide Spins all seem to have this
>>> issue too. In fact, they have had the problem for a long time now. On
>>> the
>>> positive side, both this release of F27 updates and the Rawhide spins do
>>> seem to have the USB-3 issues fixed.
>> Can you try the 4.16rc2 kernel [1] and see if that has the same
>> issues. The 4.16 kernel might help as there was a bunch of stuff that
>> changed in the exynos drm driver.
>>
>> https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
> Looking at the builds in this URL I see "rawhide" listed as one of the
> "Tasks". Doe this mean the current rawhide build are already including
the
> kernel-4.16.0-0.rc2 kernel?
Yes, and the just branched F-28 will as well. So you can do an upgrade
to F-28 and get it there too
>>> Attached, is a MS Word formatted file of my boot log. Hope this helps.
>> Please don't do that, word processing docs are really not the way to
>> handle this in open source just fpaste it or something. If it's booted
>> just do "dmesg | fpaste" and provide the URL.
>>
>>> Regards,
>>> Stewart
>>>
>>>
>>> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>>>> Hi All,
>>>>
>>>> Just a heads up that the 4.15 kernel is headed to stable releases.
>>>>
>>>> I did a bunch of testing over the weekend and fixed up a bunch of
>>>> issues, added some minor enhancements across a number of platforms.
>>>> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
>>>> for people to test, I expect a 4.15.3 kernel going to updates-testing
>>>> later today or tomorrow.
>>>>
>>>> A few notes for the fixes I added:
>>>> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
>>>> * Crypto/rng engine on some AllWinner devices now loads/works
>>>> (A10/A143/A20 at least, I suspect more will come with later kernels)
>>>> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
>>>> * A bunch of improvements for monitor detection on the Raspberry Pi
>>>> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
>>>> Pine64)
>>>> * Numerous other upstream fixes improvements that headed upstream
>>>> * 4.15.3 (not in the build above) will include aarch64 fixes for
>>>> Spectre/Meltdown.
>>>>
>>>> So please test and feel free to reply to this thread with any new
>>>> issues you see with the 4.15 series, or any positive results.
>>>>
>>>> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
6:07 a.m.
New subject: The 4.15 kernel rebase on stable releases
On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels <searider74(a)gmail.com> wrote:
I just got a chance to test the 4.16.0-0.rc2 kernel using the
20180220 Xfce
Rawhide Spin. It fails to boot due to a kernel paging request. Here are
the snippets:
[ 8.028149] Unable to handle kernel paging request at virtual
address fffffffc
Wow kernel, thanks, it's very useful :-/
Was there any further output after this? The kernel would normally
spit out a full traceback right after this line.
There's some fixes for the exynos landed for rc3 so might be worth
trying that one when it lands next week.
P
>
> Stewart
>
>
>
>
>
> On 02/22/2018 12:01 PM, Peter Robinson wrote:
>
> On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels <searider74(a)gmail.com>
> wrote:
>
> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>
> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels <searider74(a)gmail.com>
> wrote:
>
> Hi Peter,
>
> I just got a chance to update my Odroid Xu4 with the latest updates for
> F27.
> All was working fine with the exceptions for the Exynos 5 USB-3 issues
> prior
> to this upgrade. After the upgrade and a reboot, my system no longer
> boots
> into graphics mode. It seems to be failing somewhere along the line with
> udev, but I am not certain of this. The system will eventually boot into
> non-graphics mode, which can be seen when connecting the serial port and
> watching the boot messages.
>
> As I mentioned in previous posts, the Rawhide Spins all seem to have this
> issue too. In fact, they have had the problem for a long time now. On
> the
> positive side, both this release of F27 updates and the Rawhide spins do
> seem to have the USB-3 issues fixed.
>
> Can you try the 4.16rc2 kernel [1] and see if that has the same
> issues. The 4.16 kernel might help as there was a bunch of stuff that
> changed in the exynos drm driver.
>
> https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
>
> Looking at the builds in this URL I see "rawhide" listed as one of the
> "Tasks". Doe this mean the current rawhide build are already including
the
> kernel-4.16.0-0.rc2 kernel?
>
> Yes, and the just branched F-28 will as well. So you can do an upgrade
> to F-28 and get it there too
>
> Attached, is a MS Word formatted file of my boot log. Hope this helps.
>
> Please don't do that, word processing docs are really not the way to
> handle this in open source just fpaste it or something. If it's booted
> just do "dmesg | fpaste" and provide the URL.
>
> Regards,
> Stewart
>
>
> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>
> Hi All,
>
> Just a heads up that the 4.15 kernel is headed to stable releases.
>
> I did a bunch of testing over the weekend and fixed up a bunch of
> issues, added some minor enhancements across a number of platforms.
> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
> for people to test, I expect a 4.15.3 kernel going to updates-testing
> later today or tomorrow.
>
> A few notes for the fixes I added:
> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
> * Crypto/rng engine on some AllWinner devices now loads/works
> (A10/A143/A20 at least, I suspect more will come with later kernels)
> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
> * A bunch of improvements for monitor detection on the Raspberry Pi
> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
> Pine64)
> * Numerous other upstream fixes improvements that headed upstream
> * 4.15.3 (not in the build above) will include aarch64 fixes for
> Spectre/Meltdown.
>
> So please test and feel free to reply to this thread with any new
> issues you see with the 4.15 series, or any positive results.
>
> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
11:09 a.m.
New subject: The 4.15 kernel rebase on stable releases
No. No other messages follow. The system freezes at this point.
Stewart
On 02/24/2018 04:07 AM, Peter Robinson wrote:
On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels
<searider74(a)gmail.com> wrote:
> I just got a chance to test the 4.16.0-0.rc2 kernel using the 20180220 Xfce
> Rawhide Spin. It fails to boot due to a kernel paging request. Here are
> the snippets:
>
> [ 8.028149] Unable to handle kernel paging request at virtual address fffffffc
Wow kernel, thanks, it's very useful :-/
Was there any further output after this? The kernel would normally
spit out a full traceback right after this line.
There's some fixes for the exynos landed for rc3 so might be worth
trying that one when it lands next week.
P
> Stewart
>
>
>
>
>
> On 02/22/2018 12:01 PM, Peter Robinson wrote:
>
> On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels <searider74(a)gmail.com>
> wrote:
>
> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>
> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels <searider74(a)gmail.com>
> wrote:
>
> Hi Peter,
>
> I just got a chance to update my Odroid Xu4 with the latest updates for
> F27.
> All was working fine with the exceptions for the Exynos 5 USB-3 issues
> prior
> to this upgrade. After the upgrade and a reboot, my system no longer
> boots
> into graphics mode. It seems to be failing somewhere along the line with
> udev, but I am not certain of this. The system will eventually boot into
> non-graphics mode, which can be seen when connecting the serial port and
> watching the boot messages.
>
> As I mentioned in previous posts, the Rawhide Spins all seem to have this
> issue too. In fact, they have had the problem for a long time now. On
> the
> positive side, both this release of F27 updates and the Rawhide spins do
> seem to have the USB-3 issues fixed.
>
> Can you try the 4.16rc2 kernel [1] and see if that has the same
> issues. The 4.16 kernel might help as there was a bunch of stuff that
> changed in the exynos drm driver.
>
> https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
>
> Looking at the builds in this URL I see "rawhide" listed as one of the
> "Tasks". Doe this mean the current rawhide build are already including
the
> kernel-4.16.0-0.rc2 kernel?
>
> Yes, and the just branched F-28 will as well. So you can do an upgrade
> to F-28 and get it there too
>
> Attached, is a MS Word formatted file of my boot log. Hope this helps.
>
> Please don't do that, word processing docs are really not the way to
> handle this in open source just fpaste it or something. If it's booted
> just do "dmesg | fpaste" and provide the URL.
>
> Regards,
> Stewart
>
>
> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>
> Hi All,
>
> Just a heads up that the 4.15 kernel is headed to stable releases.
>
> I did a bunch of testing over the weekend and fixed up a bunch of
> issues, added some minor enhancements across a number of platforms.
> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
> for people to test, I expect a 4.15.3 kernel going to updates-testing
> later today or tomorrow.
>
> A few notes for the fixes I added:
> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
> * Crypto/rng engine on some AllWinner devices now loads/works
> (A10/A143/A20 at least, I suspect more will come with later kernels)
> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
> * A bunch of improvements for monitor detection on the Raspberry Pi
> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
> Pine64)
> * Numerous other upstream fixes improvements that headed upstream
> * 4.15.3 (not in the build above) will include aarch64 fixes for
> Spectre/Meltdown.
>
> So please test and feel free to reply to this thread with any new
> issues you see with the 4.15 series, or any positive results.
>
> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
10:10 p.m.
New subject: The 4.15 kernel rebase on stable releases
Hello All,
I am happy to report that the latest Rawhide spin
"Fedora-Mate-armhfp-Rawhide-20180301.n.0-sda.raw.xz
<https://mirrors.rit.edu/fedora/fedora/linux/development/rawhide/Spins/arm...
seems to be working correctly now for the Odroid XU4. The system boots
into graphical mode and the USB 3 issues seem to be working as well.
This version of spins is using the 4.16.0-0.rc3 kernel.
Stewart
On 02/24/2018 09:09 AM, Stewart Samuels wrote:
No. No other messages follow. The system freezes at this point.
Stewart
On 02/24/2018 04:07 AM, Peter Robinson wrote:
> On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels
> <searider74(a)gmail.com> wrote:
>> I just got a chance to test the 4.16.0-0.rc2 kernel using the
>> 20180220 Xfce
>> Rawhide Spin. It fails to boot due to a kernel paging request.
>> Here are
>> the snippets:
>>
>> [ 8.028149] Unable to handle kernel paging request at virtual
>> address fffffffc
> Wow kernel, thanks, it's very useful :-/
>
> Was there any further output after this? The kernel would normally
> spit out a full traceback right after this line.
>
> There's some fixes for the exynos landed for rc3 so might be worth
> trying that one when it lands next week.
>
> P
>
>
>> Stewart
>>
>>
>>
>>
>>
>> On 02/22/2018 12:01 PM, Peter Robinson wrote:
>>
>> On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels <searider74(a)gmail.com>
>> wrote:
>>
>> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>>
>> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels <searider74(a)gmail.com>
>> wrote:
>>
>> Hi Peter,
>>
>> I just got a chance to update my Odroid Xu4 with the latest updates for
>> F27.
>> All was working fine with the exceptions for the Exynos 5 USB-3 issues
>> prior
>> to this upgrade. After the upgrade and a reboot, my system no longer
>> boots
>> into graphics mode. It seems to be failing somewhere along the line
>> with
>> udev, but I am not certain of this. The system will eventually boot
>> into
>> non-graphics mode, which can be seen when connecting the serial port
>> and
>> watching the boot messages.
>>
>> As I mentioned in previous posts, the Rawhide Spins all seem to have
>> this
>> issue too. In fact, they have had the problem for a long time now. On
>> the
>> positive side, both this release of F27 updates and the Rawhide
>> spins do
>> seem to have the USB-3 issues fixed.
>>
>> Can you try the 4.16rc2 kernel [1] and see if that has the same
>> issues. The 4.16 kernel might help as there was a bunch of stuff that
>> changed in the exynos drm driver.
>>
>> https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
>>
>> Looking at the builds in this URL I see "rawhide" listed as one of the
>> "Tasks". Doe this mean the current rawhide build are already
>> including the
>> kernel-4.16.0-0.rc2 kernel?
>>
>> Yes, and the just branched F-28 will as well. So you can do an upgrade
>> to F-28 and get it there too
>>
>> Attached, is a MS Word formatted file of my boot log. Hope this helps.
>>
>> Please don't do that, word processing docs are really not the way to
>> handle this in open source just fpaste it or something. If it's booted
>> just do "dmesg | fpaste" and provide the URL.
>>
>> Regards,
>> Stewart
>>
>>
>> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>>
>> Hi All,
>>
>> Just a heads up that the 4.15 kernel is headed to stable releases.
>>
>> I did a bunch of testing over the weekend and fixed up a bunch of
>> issues, added some minor enhancements across a number of platforms.
>> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
>> for people to test, I expect a 4.15.3 kernel going to updates-testing
>> later today or tomorrow.
>>
>> A few notes for the fixes I added:
>> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
>> * Crypto/rng engine on some AllWinner devices now loads/works
>> (A10/A143/A20 at least, I suspect more will come with later kernels)
>> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
>> * A bunch of improvements for monitor detection on the Raspberry Pi
>> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
>> Pine64)
>> * Numerous other upstream fixes improvements that headed upstream
>> * 4.15.3 (not in the build above) will include aarch64 fixes for
>> Spectre/Meltdown.
>>
>> So please test and feel free to reply to this thread with any new
>> issues you see with the 4.15 series, or any positive results.
>>
>> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>
>>
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>
5:16 p.m.
New subject: The 4.15 kernel rebase on stable releases
Hello All,
FYI. After my previous successes (see thread below) I earlier this week
performed an upgrade on my Odroid XU4 to the latest version of Rawhide
Mate Spin. For some reason, once again, although the system boots, it
no longer boots into graphical mode, complaining of a UDEV issue. This
is the same problem it seems I was running into with the latest updates
of F27 and why I switched over to the Rawhide releases with the newer
kernel. With the updated software, my Odroid boots into graphical mode
if I use the previously installed 4.16.0-0.rc3 kernel, but not with the
newer kernel.
I will upgrade it again to the latest rawhide release and post the log
of that, should I still have issues.
Stewart
On 03/04/2018 08:10 PM, Stewart Samuels wrote:
Hello All,
I am happy to report that the latest Rawhide spin
"Fedora-Mate-armhfp-Rawhide-20180301.n.0-sda.raw.xz
<https://mirrors.rit.edu/fedora/fedora/linux/development/rawhide/Spins/arm...
seems to be working correctly now for the Odroid XU4. The system
boots into graphical mode and the USB 3 issues seem to be working as
well. This version of spins is using the 4.16.0-0.rc3 kernel.
Stewart
On 02/24/2018 09:09 AM, Stewart Samuels wrote:
> No. No other messages follow. The system freezes at this point.
>
> Stewart
>
> On 02/24/2018 04:07 AM, Peter Robinson wrote:
>> On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels
>> <searider74(a)gmail.com> wrote:
>>> I just got a chance to test the 4.16.0-0.rc2 kernel using the
>>> 20180220 Xfce
>>> Rawhide Spin. It fails to boot due to a kernel paging request.
>>> Here are
>>> the snippets:
>>>
>>> [ 8.028149] Unable to handle kernel paging request at virtual
>>> address fffffffc
>> Wow kernel, thanks, it's very useful :-/
>>
>> Was there any further output after this? The kernel would normally
>> spit out a full traceback right after this line.
>>
>> There's some fixes for the exynos landed for rc3 so might be worth
>> trying that one when it lands next week.
>>
>> P
>>
>>
>>> Stewart
>>>
>>>
>>>
>>>
>>>
>>> On 02/22/2018 12:01 PM, Peter Robinson wrote:
>>>
>>> On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels
>>> <searider74(a)gmail.com>
>>> wrote:
>>>
>>> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>>>
>>> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels
>>> <searider74(a)gmail.com>
>>> wrote:
>>>
>>> Hi Peter,
>>>
>>> I just got a chance to update my Odroid Xu4 with the latest updates
>>> for
>>> F27.
>>> All was working fine with the exceptions for the Exynos 5 USB-3 issues
>>> prior
>>> to this upgrade. After the upgrade and a reboot, my system no longer
>>> boots
>>> into graphics mode. It seems to be failing somewhere along the
>>> line with
>>> udev, but I am not certain of this. The system will eventually
>>> boot into
>>> non-graphics mode, which can be seen when connecting the serial
>>> port and
>>> watching the boot messages.
>>>
>>> As I mentioned in previous posts, the Rawhide Spins all seem to
>>> have this
>>> issue too. In fact, they have had the problem for a long time
>>> now. On
>>> the
>>> positive side, both this release of F27 updates and the Rawhide
>>> spins do
>>> seem to have the USB-3 issues fixed.
>>>
>>> Can you try the 4.16rc2 kernel [1] and see if that has the same
>>> issues. The 4.16 kernel might help as there was a bunch of stuff that
>>> changed in the exynos drm driver.
>>>
>>> https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
>>>
>>> Looking at the builds in this URL I see "rawhide" listed as one of
the
>>> "Tasks". Doe this mean the current rawhide build are already
>>> including the
>>> kernel-4.16.0-0.rc2 kernel?
>>>
>>> Yes, and the just branched F-28 will as well. So you can do an upgrade
>>> to F-28 and get it there too
>>>
>>> Attached, is a MS Word formatted file of my boot log. Hope this
>>> helps.
>>>
>>> Please don't do that, word processing docs are really not the way to
>>> handle this in open source just fpaste it or something. If it's booted
>>> just do "dmesg | fpaste" and provide the URL.
>>>
>>> Regards,
>>> Stewart
>>>
>>>
>>> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>>>
>>> Hi All,
>>>
>>> Just a heads up that the 4.15 kernel is headed to stable releases.
>>>
>>> I did a bunch of testing over the weekend and fixed up a bunch of
>>> issues, added some minor enhancements across a number of platforms.
>>> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
>>> for people to test, I expect a 4.15.3 kernel going to updates-testing
>>> later today or tomorrow.
>>>
>>> A few notes for the fixes I added:
>>> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
>>> * Crypto/rng engine on some AllWinner devices now loads/works
>>> (A10/A143/A20 at least, I suspect more will come with later kernels)
>>> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
>>> * A bunch of improvements for monitor detection on the Raspberry Pi
>>> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
>>> Pine64)
>>> * Numerous other upstream fixes improvements that headed upstream
>>> * 4.15.3 (not in the build above) will include aarch64 fixes for
>>> Spectre/Meltdown.
>>>
>>> So please test and feel free to reply to this thread with any new
>>> issues you see with the 4.15 series, or any positive results.
>>>
>>> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>>
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>
2221
days inactive
2246
days old
4 comments
2 participants
participants (2)
-
Peter Robinson -
Stewart Samuels