7:20 a.m.
Hi list,
Have discovered with the help of a hackerspace group that
my StorCenter ix-200 http://tinyurl.com/27tegxl
has Debian 5 under the hood,
with some Vendor firmware bits invloved.
# uname -smr
Linux 2.6.22.18 armv5tejl
Would it be possible to convert to Fedora?
Only have a lan connection to it.
--
Regards,
Frank Murphy
UTF_8 Encoded
Friend of Fedora
7:23 a.m.
2010/10/26 Frank Murphy <frankly3d(a)gmail.com>:
# uname -smr
Linux 2.6.22.18 armv5tejl
Would it be possible to convert to Fedora?
Yes, it's possible.
Only have a lan connection to it.
That could be a problem. Do you mean that you have no means to reflash it?
--
With best regards, Peter Lemenkov.
7:35 a.m.
Frank Murphy píše v Út 26. 10. 2010 v 13:20 +0100:
Hi list,
Have discovered with the help of a hackerspace group that
my StorCenter ix-200 http://tinyurl.com/27tegxl
has Debian 5 under the hood,
with some Vendor firmware bits invloved.
# uname -smr
Linux 2.6.22.18 armv5tejl
what's in /proc/cpuinfo?
Would it be possible to convert to Fedora?
Only have a lan connection to it.
possible - yes, but adventurous without a serial console (which likely
exists on the system board) or at least a system recovery method
Dan
7:38 a.m.
On 26/10/10 13:35, Dan Horák wrote:
what's in /proc/cpuinfo?
# /proc/cpuinfo
-sh: /proc/cpuinfo: Permission denied
> Would it be possible to convert to Fedora?
> Only have a lan connection to it.
possible - yes, but adventurous without a serial console (which likely
exists on the system board) or at least a system recovery method
I believe one can be soldered on to the board?
--
Regards,
Frank Murphy
UTF_8 Encoded
Friend of Fedora
7:39 a.m.
On 26/10/10 13:35, Dan Horák wrote:
what's in /proc/cpuinfo?
Duh!
# cat /proc/cpuinfo
Processor : ARM926EJ-S rev 1 (v5l)
BogoMIPS : 992.87
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 16384
I assoc : 4
I line length : 32
I sets : 128
D size : 16384
D assoc : 4
D line length : 32
D sets : 128
Hardware : Feroceon-KW
Revision : 0000
Serial : 0000000000000000
--
Regards,
Frank Murphy
UTF_8 Encoded
Friend of Fedora
7:45 a.m.
Frank Murphy píše v Út 26. 10. 2010 v 13:38 +0100:
On 26/10/10 13:35, Dan Horák wrote:
>
> what's in /proc/cpuinfo?
>
# /proc/cpuinfo
-sh: /proc/cpuinfo: Permission denied
oh, I meant to run "cat /proc/cpuinfo", but at also means you have ssh
connection, don't you?
>> Would it be possible to convert to Fedora?
>> Only have a lan connection to it.
>
> possible - yes, but adventurous without a serial console (which likely
> exists on the system board) or at least a system recovery method
I believe one can be soldered on to the board?
there could even be pins already soldered waiting only on connecting eg.
serial-to-usb convertor
Dan
7:54 a.m.
Frank Murphy píše v Út 26. 10. 2010 v 13:39 +0100:
On 26/10/10 13:35, Dan Horák wrote:
>
> what's in /proc/cpuinfo?
>
Duh!
# cat /proc/cpuinfo
Processor : ARM926EJ-S rev 1 (v5l)
BogoMIPS : 992.87
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
Hardware : Feroceon-KW
Revision : 0000
Serial : 0000000000000000
that looks quite promising :-)
Dan
8:10 a.m.
On 26/10/10 13:54, Dan Horák wrote:
>>
>> what's in /proc/cpuinfo?
that looks quite promising :-)
Dan
http://www.openprotium.org/tiki-index.php?page_ref_id=39
Once I get this bit done (serial console),
will probably be back, and ressurect this thread.
--
Regards,
Frank Murphy
UTF_8 Encoded
Friend of Fedora
4924
days inactive
4924
days old
8 comments
3 participants
participants (3)
-
Dan Horák -
Frank Murphy -
Peter Lemenkov