Gitweb:
http://git.fedorahosted.org/git/?p=fence-agents.git;a=commitdiff;h=4cc358...
Commit: 4cc3580075dc0e7211837ffd98350224b882bde5
Parent: e6fcc75af95f56c107786d60e310ce0e0442e940
Author: Jan Pokorný <jpokorny(a)redhat.com>
AuthorDate: Thu Feb 28 22:37:08 2013 +0100
Committer: Marek 'marx' Grac <mgrac(a)redhat.com>
CommitterDate: Fri Jun 28 11:05:30 2013 +0200
lib: remove static metadata from fence.rng.head
Possible as:
- rps10: droped in aa905c0bf7a717648b44069e4a192f7afe0cda61
(4 years back)
- brocade, mcdata, sanbox2, bladecenter, bullpap, ipmilan:
generate metadata natively
- vixel, egenera, xcat: ditto
Signed-off-by: Jan Pokorný <jpokorny(a)redhat.com>
Resolves: rhbz#917675
---
fence/agents/lib/fence.rng.head | 129 ---------------------------------------
1 files changed, 0 insertions(+), 129 deletions(-)
diff --git a/fence/agents/lib/fence.rng.head b/fence/agents/lib/fence.rng.head
index 632bb53..22f4452 100644
--- a/fence/agents/lib/fence.rng.head
+++ b/fence/agents/lib/fence.rng.head
@@ -3,134 +3,5 @@
<optional>
<choice>
<!-- begin specific fence devices -->
- <!-- begin non-generated device definitions -->
- <!-- RPS10 -->
- <group rha:name="fence_rps10" rha:description="RPS10 Serial
Switch" >
- <attribute name="device" rha:description="The device the
switch
- is connected to on the controlling host."
- rha:sample="/dev/ttys2"/>
- <attribute name="port" rha:description="The switch outlet
- number." rha:sample="2"/>
- </group>
- <!--FIXME: Determine if the following group should exclude
- the auth and lanplus attributes. Those attributes apply only to
- the impilan fence device.-->
- <!-- Brocade, McData, SANBox2, Bladecenter,bullpap, ipmilan -->
- <!-- FIXME split apart and add rha:name hints for
- configuration utilities -->
- <group>
- <attribute name="ipaddr" rha:description="IP address or the
name
- of the device." rha:sample="rack007"/>
- <optional>
- <attribute name="login" rha:description="The login name used
to
- access the device. " rha:sample="admin"/>
- </optional>
- <optional>
- <attribute name="passwd" rha:description="The password used to
- authenticate the connection to the
- device." rha:sample="pa$$word"/>
- </optional>
- <optional>
- <attribute name="passwd_script" rha:description="The script
that
- supplies a password for access to the fence device. Using
- this supersedes the Password parameter." rha:sample=""/>
- </optional>
- <optional>
- <attribute name="auth" rha:description="For IPMI LAN
- only. Authentication Type: none, password,
- md2, or md5" rha:sample=""/>
- </optional>
- <optional>
- <attribute name="lanplus" rha:description="For IPMI LAN only.
- Set value to either True or 1; leave out for false."
- rha:sample="True"/>
- </optional>
- </group>
- <!-- Vixel -->
- <group rha:name="fence_vixel">
- <optional>
- <attribute name="ipaddr" rha:description="IP address or the
- name of the device." rha:sample="10.1.0.1"/>
- </optional>
- <optional>
- <attribute name="passwd" rha:description="The password used to
- authenticate the connection to the
- device." rha:sample="pa$$word"/>
- </optional>
- <optional>
- <attribute name="passwd_script" rha:description="The script
- that supplies a password for access to the
- fence device. Using this supersedes the Password
- parameter." rha:sample=""/>
- </optional>
- </group>
- <!-- Egenera -->
- <!-- FIXME: Note that in the schema web page each is listed as a
- parameter. Likewise for Conga. In addition, Conga shows Ipan
- and pserver parameters. Also, in Conga, the esh parameter is
- an optional ESH path. Presumably those should be attributes in
- the schema. We need more invormation on this. -->
- <group rha:name="fence_egenera">
- <optional>
- <attribute name="cserver" rha:description="The hostname (and
- optionally the username in the form of username@hostname)
- assigned to the device. Refer to the fence_egenera(8) man
- page for more information." rha:sample=""/>
- </optional>
- <optional>
- <attribute name="pserver" rha:description="The pserver to
operate on. fence_egenera(8)" />
- </optional>
- <optional>
- <attribute name="lpan" rha:description="The lpan to operate
on. fence_egenera(8)" />
- </optional>
- <optional>
- <attribute name="action" rha:description="The action to
perform (reboot, off, on, or status). fence_egenera(8)" />
- </optional>
- <optional>
- <attribute name="esh" rha:description="Path to the esh command
on the cserver. fence_egenera(8)" />
- </optional>
- <optional>
- <attribute name="user" rha:description="See
fence_egenera(8)" />
- </optional>
- <optional>
- <attribute name="delay" rha:description="Wait this many
seconds before fencing is started. fence_egenera(8)" />
- </optional>
- </group>
- <!-- FIXME: It appears that xCat is no longer supported. Found no
- fence agents for x Cat in RHEL 5.3. -->
- <!-- xCAT -->
- <group rha:name="fence_xcat">
- <attribute name="rpowerpath" rha:description=""
rha:sample=""/>
- </group>
- <group rha:name="fence_na" rha:description="Node
Assassin">
- <optional>
- <attribute name="option"/> <!-- deprecated; for
compatibility. use "action" -->
- </optional>
- <!-- I don't think I need this yet.
- <optional>
- <attribute name="auth" rha:description="Node Assassin Auth
type (password or none)" />
- </optional>
- -->
- <optional>
- <attribute name="ipaddr" rha:description="Node Assassin IP
or name to talk to" />
- </optional>
- <optional>
- <attribute name="passwd" rha:description="Password needed to
access the Node Assassin(s)" />
- </optional>
- <optional>
- <attribute name="passwd_script" rha:description="Script to
retrieve password (not implemented)" />
- </optional>
- <optional>
- <attribute name="login" rha:description="Login name used to
log into the Node Assassin(s)" />
- </optional>
- <optional>
- <attribute name="action" rha:description="Operation to
perform. Valid operations: on, off, reboot, status, list, release, boot or shutdown"
/>
- </optional>
- <optional>
- <attribute name="quiet" rha:description="Supress
output" />
- </optional>
- </group>
-
- <!-- end non-generated device definitions -->
<!-- begin auto-generated device definitions -->