Does each blade have its own optical drive ?

“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)


From: "Sam Sen" <ssen@ariasystems.com>
To: "cobbler mailing list" <cobbler@lists.fedorahosted.org>
Sent: Tuesday, March 19, 2013 1:49:12 PM
Subject: Re: [cobbler] Assigning a system to a profile

Hmmmm … so if I have 12 blades to build, is there a quicker way to do this? I would like to boot from ISO (the same ISO for all 12 systems) and have cobbler take over. I don’t think this will work without PXE based on what you’re telling me.

 

 

Regards,

 

Sam

 

From: cobbler-bounces@lists.fedorahosted.org [mailto:cobbler-bounces@lists.fedorahosted.org] On Behalf Of Dan White
Sent: Tuesday, March 19, 2013 1:45 PM
To: cobbler mailing list
Subject: Re: [cobbler] Assigning a system to a profile

 

The default behavior of the ISO is to boot from local media after a delay

Look at a file : <iso root>/isolinux/isolinux.cfg

“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

 


From: "Sam Sen" <ssen@ariasystems.com>
To: "cobbler mailing list" <cobbler@lists.fedorahosted.org>
Sent: Tuesday, March 19, 2013 1:36:07 PM
Subject: Re: [cobbler] Assigning a system to a profile


When the system boots up and loads the ISO, I thought it would automatically force the system to load a profile. In theory since there is no OS installed, it will start the OS installation without having you select from the cobbler menu.
 
Is this feature not available for non-pxe boot?
 
Dan White <ygor@comcast.net> wrote:
 

So what is happening that should not happen ?

Contrarywise, what is not happening that should ?

“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

 


From: "Sam Sen" <ssen@ariasystems.com>
To: "cobbler mailing list" <cobbler@lists.fedorahosted.org>
Sent: Tuesday, March 19, 2013 1:22:47 PM
Subject: Re: [cobbler] Assigning a system to a profile

It’s there …

 

 

[root@phl-00-cobbler iso]# cobbler profile list

   ORACLE

 

 

Regards,

 

Sam

 

From: cobbler-bounces@lists.fedorahosted.org [mailto:cobbler-bounces@lists.fedorahosted.org] On Behalf Of Dan White
Sent: Tuesday, March 19, 2013 1:12 PM
To: cobbler mailing list
Subject: Re: [cobbler] Assigning a system to a profile

 

What does the command "cobbler profile list" return ?

If one of the lines is not "ORACLE", then that is your first problem.

“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

 


From: "Sam Sen" <ssen@ariasystems.com>
To: cobbler@lists.fedorahosted.org
Sent: Tuesday, March 19, 2013 1:06:56 PM
Subject: [cobbler] Assigning a system to a profile

Not sure what I’m missing but I’m attempting to automatically install the OS with our new blade systems using a cobbler iso (generated by buildiso). The cobbler menu shows up with the list of available systems, but I want it to automatically install when it loads the ISO. I don’t have DHCP hence the use of the buildiso command.

 

I added a new system by running the following command. Please note, the install works fine when I select the system but that’s not what I want. Notice I have the “mac” specified and I went as far as using the mac address of eth0 as the name for the system. Both times, I’m greeted with the menu and I’m forced to choose.

 

cobbler system add --name=blade1 –mac=XX:XX:XX:XX:XX:XX --profile=ORACLE --interface=bond0 --interface-type=bond --bonding-opts="mode=6 miimon=1000" --ip-address=172.31.20.45 --hostname=blade1.domain.com --ksmeta='server_type=DB disk_layout=BLADES_ORACLE' --subnet=255.255.255.0 --gateway=172.31.20.250 --kopts='ksdevice=eth0 ip=172.31.20.45 netmask=255.255.255.0 dns=172.31.10.220 gateway=172.31.20.250' --static=1

 

 

 

--

Sam Sen

Sr Systems Administrator

215.913.4797

 

Aria Systems, Inc.

600 Reed Road, Suite 302

Broomall, PA 19008

www.ariasystems.com

 


_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler


_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler


_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler


_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler