Mhh, suse Pakete sind hier vielleicht nicht das beste. Würde doch noch Linux Mint empfehlen. (Debian Pakete)

Viele Grüße, Jannis Christ

Gesendet von meinem Nokia Telefon

------Original message------ From: Detlef Graef detlef.graef@yahoo.de To: "Fedora discussions in German" de-users@lists.fedoraproject.org Date: Monday, December 19, 2011 7:42:32 PM GMT+0100 Subject: Fedora 16 (x86_64) cyberJack RFID komfort Kartenleser

Hallo,

hat vielleicht jemand einen "cyberJack RFID komfort Leser" unter Fedora 16 erfolgreich in Betrieb?

Ich habe folgendes RPM Paket installiert:

pcsc-cyberjack-3.99.5final.SP03-1.suse12.1.x86_64.rpm

da es keine Pakete für Fedora gibt.

Habe den Dienst pcscd neu gestartet.

Wenn ich das Kommando "cyberjack" aufrufe um die Installation zu überprüfen erhalte ich folgende Fehlermeldung:

BEGIN: ermittle Distribution (0/5) END : ermittle Distribution (1/5) [OK] BEGIN: ermittle Systeminformationen (1/5) END : ermittle Systeminformationen (2/5) [OK] BEGIN: ermittle Gruppeninformation (2/5) END : ermittle Gruppeninformation (3/5) [OK] BEGIN: ermittle laufende Dienste (3/5) END : ermittle laufende Dienste (4/5) [OK] BEGIN: ermittle und teste angeschlossene Leser (4/5) SCardListReader: Cannot find a smart card reader. (8010002E) Error in enumReaders: -5 END : ermittle und teste angeschlossene Leser (5/5) [ERROR]

Mit "lsusb" sieht man den Kartenleser:

Bus 002 Device 004: ID 0c4b:0501 Reiner SCT Kartensysteme GmbH

Ich habe den pcscd auch mal folgendermassen gestartet und anschließend das Kommando "cyberjack" aufgerufen:

/usr/sbin/pcscd -f -d 00000000 debuglog.c:269:DebugLogSetLevel() debug level=debug 00001301 configfile.l:245:DBGetReaderListDir() Parsing conf directory: /etc/reader.conf.d 00000084 configfile.l:287:DBGetReaderList() Parsing conf file: /etc/reader.conf.d/libccidtwin 00000219 pcscdaemon.c:575:main() pcsc-lite 1.7.4 daemon ready. 00003834 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0001, path: /dev/bus/usb/002/001 00000446 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0001, path: /dev/bus/usb/002/001 00000411 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x04A9, PID: 0x2220, path: /dev/bus/usb/002/002 00000405 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0001, path: /dev/bus/usb/002/001 00000413 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x0C4B, PID: 0x0501, path: /dev/bus/usb/002/004 00000520 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001 00000385 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001 00000410 hotplug_libudev.c:258:get_driver() Looking for a driver for VID: 0x0EA0, PID: 0x2168, path: /dev/bus/usb/001/003 65680216 winscard_msg_srv.c:227:ProcessEventsServer() Common channel packet arrival 00000058 winscard_msg_srv.c:239:ProcessEventsServer() ProcessCommonChannelRequest detects: 5 00000017 pcscdaemon.c:93:SVCServiceRunLoop() A new context thread creation is requested: 5 00001232 winscard_svc.c:297:ContextThread() Thread is started: dwClientID=5, threadContext @25D43A0 00000052 winscard_svc.c:315:ContextThread() Received command: CMD_VERSION from client 5 00000081 winscard_svc.c:327:ContextThread() Client is protocol version 4:2 00000015 winscard_svc.c:347:ContextThread() CMD_VERSION rv=0x0 for client 5 00000159 winscard_svc.c:315:ContextThread() Received command: ESTABLISH_CONTEXT from client 5 00000046 winscard.c:193:SCardEstablishContext() Establishing Context: 0x103DBB5 00000015 winscard_svc.c:408:ContextThread() ESTABLISH_CONTEXT rv=0x0 for client 5 00000140 winscard_svc.c:315:ContextThread() Received command: CMD_GET_READERS_STATE from client 5 00000278 winscard_svc.c:315:ContextThread() Received command: RELEASE_CONTEXT from client 5 00000085 winscard.c:204:SCardReleaseContext() Releasing Context: 0x103DBB5 00000023 winscard_svc.c:423:ContextThread() RELEASE_CONTEXT rv=0x0 for client 5 00000073 winscard_svc.c:307:ContextThread() Client die: 5 00000037 winscard_svc.c:918:MSGCleanupClient() Thread is stopping: dwClientID=5, threadContext @25D43A0 00000015 winscard_svc.c:924:MSGCleanupClient() Freeing SCONTEXT @25D43A0

Gruß

Detlef -- de-users mailing list de-users@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/de-users