Issue on the relationship of the three rpms
by Park Lee
Hi,
In fedora/linux/core/updates/2/SRPMS/, we can see
there is a kernel-2.6.9-1.6_FC2.src.rpm, while, in
fedora/linux/core/updates/2/i386/, there also is a
kernel-sourcecode-2.6.9-1.6_FC2.noarch.rpm.
Since these two rpms both contain kernel source,
What is the difference with the two?
And, What's the relationship between them and
kernel-2.6.9-1.6_FC2.i686.rpm ?
Thanks a lot.
=====
Best Regards,
Park Lee
__________________________________
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
http://info.mail.yahoo.com/mail_250
19 years, 3 months
First packaging attempt : atmel-firmware
by Richard Hughes
I have made a simple package that I think would be suitable for
fedora-extras/pre-extras - but I would like some feedback frrom the list.
The spec file is located at
http://hughsie.no-ip.com/linux/atmel-firmware/atmel-firmware.spec
- I have based this on the existing firmware packages from dag, and a
couple of spec files for fedora that I found.
Notes about the package: I've not included the firmware loader (atmel_fwl)
- as this would force me to create i386 packages and the like, but by
packaging the firmware alone, the package can be a noarch. I've not needed
to use the firmware loader once in all my testing, hotplug works just fine.
By installing the rpm, my belkin 802.11b wireless card works first time,
loading the firmware from /lib/firmware
The firmware is freely re-distributable (see COPYING)
Simon Kelley http://www.thekelleys.org.uk/atmel (original packager) has no
problems with a fedora rpm, as debian and slackware already package the
firmware themselves.
Comments?
Richard Hughes
url: http://hughsie.no-ip.com/linux/atmel-firmware/
19 years, 3 months
Plese make.
by T.T. Eiji Sato
Please make Internet Radio...Monitor...portable...car accessary...in car
navi.(World Wide Satellite.)
19 years, 3 months
RE: First packaging attempt : atmel-firmware
by Atchley.Van@inventec.com
Is this about my installation problem? If so it's an internal 1,600 Gig
HDD. I am have 6 300Gig HDDs grouped together using HPs Smart Array card
-----Original Message-----
From: Alan Cox [mailto:alan@redhat.com]
Sent: Tuesday, December 28, 2004 4:47 PM
To: Development discussions related to Fedora Core
Subject: Re: First packaging attempt : atmel-firmware
On Tue, Dec 28, 2004 at 01:22:43PM -0800, Kenneth Porter wrote:
> I'd recommend at76c50x-firmware, instead.
If you are only included the pcmcia/cf firmware in the package make it
explicitly at76c50x-pcmcia-firmware as there are USB ones that need
firmware
sets too and I'm under the impression the firmware is different
--
fedora-devel-list mailing list
fedora-devel-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-devel-list
19 years, 3 months
rawhide report: 20041228 changes
by Build System
Updated Packages:
coreutils-5.2.1-35
------------------
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 5.2.1-35
- Change install to restorecon if it can
* Wed Dec 15 2004 Tim Waugh <twaugh(a)redhat.com>
- Fixed small bug in i18n patch.
libselinux-1.19.3-2
-------------------
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 1.19.3-2
- Fix unitialized variable in avcstat.c
net-snmp-5.2-2
--------------
* Mon Dec 27 2004 Radek Vokal <rvokal(a)redhat.com> 5.2-2
- patch adding ipv6 support to ip system stats
rpmdb-fedora-1:4-0.20041228
---------------------------
selinux-policy-strict-1.19.15-9
-------------------------------
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 1.19-15-9
- Try to fix certain scripts to not transition to initrc_t
* sendmail, sshd, prefdm, crond
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 1.19-15-8
- Add Russell patches to udev, modutil
selinux-policy-targeted-1.19.15-9
---------------------------------
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 1.19-15-9
- Try to fix certain scripts to not transition to initrc_t
* sendmail, sshd, prefdm, crond
* Mon Dec 27 2004 Dan Walsh <dwalsh(a)redhat.com> 1.19-15-8
- Add Russell patches to udev, modutil
slrn-0.9.8.1-3
--------------
* Mon Dec 27 2004 Jindrich Novy <jnovy(a)redhat.com> 0.9.8.1-3
- package contrib subdir because of slrn-conv script (#73451)
- slrnpull.conf is now %config(noreplace), original config
won't be overwritten (#56001)
- include slrnpull man page
19 years, 3 months
FC3: install: Howto generate a new dvd tree with recent update?
by Dario Lesca
Another question:
What is the correct option fo /usr/lib/anaconda-runtime/buildinstall for
rebuild a fc3 tree ?
I have use this:
/usr/lib/anaconda-runtime/buildinstall \
--comp dist-9 --pkgorder /u/fc3/pkgorder.txt \
--product 'Fedora Core 3.b' --release 3 --version b \
--prodpath Fedora /u/fc3
but I got this error:
> Getting pango modules
> /usr/sbin/chroot: cannot execute /usr/bin/pango-querymodules: No such
> file or directory
>
> I've confirmed that pango-querymodules exists in the instimage
> and bash does as well.
there are a howto or doc for this procedure?
Many thanks
Dario Lesca
-----Messaggio Inoltrato-----
From: Dario Lesca <d.lesca(a)solinos.it>
To: fedora-list(a)redhat.com
Subject: FC3: install: Howto generate a dvd whit recent update?
Date: Sat, 25 Dec 2004 20:34:12 +0100
I have fount this howto for FC1:
http://www.coolgoose.com/sites/lal_tvm/anaconda.html
But some files (es.: getfullcomps.py) not there are into package for FC3...
I want only update the Fedora/RPMS dir, after I run the command
/usr/lib/anaconda-runtime/genhdlist for rebuild base/hdlist* and check the
new structure via nfs setup .... but somethink is wrong ... when the
anaconda check the package dependencies exit and stop the installation.
Someone can point me on right way?
Many thanks and sorry for my bad english
d.l.
--
Dario Lesca <d.lesca(a)solinos.it>
19 years, 3 months
New unified and updated Linux Font HOWTO
by Avi Alkalay
http://tldp.org/HOWTO/Font-HOWTO
Table of Contents
1. Introduction
2. Why Fonts on Linux Aren't Straight Forward ?
3. Font Packages
3.1. Bitstream Vera Fonts
3.2. Microsoft Fonts
4. The Easy Steps to Enlighten Your Desktop
4.1. Get a Better FreeType RPM
4.2. Configure Your Desktop
5. Producing Portable Documents
5.1. Linux to Windows and vice-versa
5.2. Linux to Linux
5.3. Any to Any with OpenOffice.org and Bitstream Vera Fonts
5.4. A Very Small Guide of Style
6. Create RPMs of Your Fonts
6.1. Step 1: Prepare Your Environment to Build The Package
6.2. Step 2: Prepare the Fonts Files to Package
6.3. Step 3: Create a .spec File With This Template
6.4. Step 4: Build It
7. Designer's Guide for Modern Good Looking Documents
7.1. Families of Typefaces
7.2. Classifications of Typefaces
7.3. Ligatures, Small caps fonts and expert fonts
7.4. Font Metrics and Shapes
8. Font Technologies
8.1. Bitmap Fonts
8.2. TrueType Fonts
8.3. Type 1 Fonts
8.4. Type3 Fonts
8.5. Type 42 Fonts
8.6. Type 1 vs TrueType -- a comparison
9. Getting Fonts For Linux
9.1. True Type
9.2. Type 1 Fonts and Metafont
10. Useful Font Software for Linux
11. Ethics and Licensing Issues Related to Type
12. References
12.1. Font Information
12.2. Postscript and Printing Information
13. Glossary
A. Enabling Bytecode Interpreter in FreeType
B. We Need Your Help
C. About this Document
19 years, 3 months
reg getch() function
by ram
Can anyone tell me how to write a getch fucntion using the GETATTR and
SETATTR commands.The functions should be like " when we click the button the
key board should display the button pressed.THis can be done but what about
the escape sequence buttons like uparrow and down arrow.
--
warm regards
Ram
DISCLAIMER:
Information contained and transmitted by this E-MAIL is proprietary to
Sify Limited and is intended for use only by the individual or entity to
which it is addressed, and may contain information that is privileged,
confidential or exempt from disclosure under applicable law. If this is a
forwarded message, the content of this E-MAIL may not have been sent with
the authority of the Company. If you are not the intended recipient, an
agent of the intended recipient or a person responsible for delivering the
information to the named recipient, you are notified that any use,
distribution, transmission, printing, copying or dissemination of this
information in any way or in any manner is strictly prohibited. If you have
received this communication in error, please delete this mail & notify us
immediately at admin(a)sifycorp.com
19 years, 3 months
Kolab server
by Dennis Gilmore
Hi All,
Ive done some work on the mandrake rpms for kolab. and nearly have them ready
to release to the world. Just wanted to ask if i should bundle in the
configuration for amavis-new and clamav so that someone installing kolab
would have a working mailserver with spam and antivirus scanning out of the
box.
and if i should replace /etc/sysconfig/saslauthd as it needs modification.
my thinking was this the way kolab runs it keeps the config files
in /etc/kolab and runs some macros over them on service start. and if
theres changes put the new config in place. i should just add a template for
the saslauthd file
i still need to switch over the ftp deamon from proftpd to vsftpd and tidy up
some config files but right now after making one chnage to the kolab.schema
file enabling ldap for sasl authentication and
running /usr/sbin/kolab_bootstrap -b the kolab server works
i dont know if the ftp deamon is really necessary as it is only used for
legacy clients. but i should do it so kolab is feature complete.
So why will gnome users want kolab. well at the least it provides an easy way
to configure cyrus-imapd and get a working setup with ldap authentication
and kde users will be able to easily setup kontact to run with it.
Dennis
19 years, 3 months
xfce dependence problem
by Richard Hally
Would someone please fix the dependencce problem xfce has in the
/development tree? see below for the output from "yum update" :
this has been happening for more than a few days.
Thanks
Richard Hally
Error: missing dep: libxfce4mcs-client.so.1 for pkg xffm
Error: missing dep: libxfcegui4.so.1 for pkg xfce4-systray
Error: missing dep: libxfce4mcs-manager.so.1 for pkg xfce4-iconbox
Error: missing dep: libxfce4mcs-client.so.1 for pkg xfce4-iconbox
Error: missing dep: libxfce4mcs-client.so.1 for pkg xfce-utils
Error: missing dep: libxfcegui4.so.1 for pkg xfwm4
Error: missing dep: libxfce4mcs-manager.so.1 for pkg xfce-utils
Error: missing dep: libxfce4mcs-client.so.1 for pkg xfdesktop
Error: missing dep: libxfcegui4.so.1 for pkg xfprint
Error: missing dep: libxfcegui4.so.1 for pkg xffm
Error: missing dep: libxfce4mcs-client.so.1 for pkg xfce4-panel
Error: missing dep: libxfcegui4.so.1 for pkg xfdesktop
Error: missing dep: libxfce4mcs-manager.so.1 for pkg xfce4-panel
Error: missing dep: libxfce4mcs-manager.so.1 for pkg xffm
Error: missing dep: libxfcegui4.so.1 for pkg xfce-utils
Error: missing dep: libxfcegui4.so.1 for pkg xfce4-panel
Error: missing dep: libxfcegui4.so.1 for pkg xfce4-iconbox
Error: missing dep: libxfce4mcs-client.so.1 for pkg xfwm4
19 years, 3 months