October 2013 - devel - Fedora Mailing-Lists

by Frankie

Hi guys, I hope all is well. I am writing in regards to something I had written about two months ago. This in regards to the search engine. https://fedorahosted.org/fedora-infrastructure/ticket/1055#trac-add-comment I think we need to seriously fix this thing once and for all. I am looking at designing a solution for us. I however would like to start from the basics. We will need to look at the solutions that are present at the current time. This should allow us to critic and analyse them. I will then take this issue into the meeting for voting and whatever is decided is what I shall implement. Kindly do advice if you have any pointers on this project. I however must be honest and say it will take me about 2 months to complete when i start because I have a day job elsewhere. This does not mean I will not want assistance. As always assistance is highly appreciated. I hope this will be fruitful so we can close this once and for all. Or should I say until we need a revision done. Thanks, Kind Regards, -- Skype: Frankie Onuonga twitter: Frankie.onuonga irc #freenode: Frankie.onuonga

10 years, 5 months

10
19
0 / 0

Fedora Working Groups: Call for Self-Nominations

by Matthew Miller

Introduction ------------ Based on discussions at and around Flock, the Fedora Project Board has approved a proposal for a big change in the way we put Fedora together. Rather than presenting one Fedora with multiple slightly-different install options, future Fedora will be designed, developed, and promoted as three separate products built around a common core. To take that idea from talk to reality, we're making a corresponding change to Fedora leadership. Each product will be guided by a Working Group, which will function as an independent subcommittee of FESCo, (the Fedora Engineering Steering Committee). FESCo will resolve issues which impact multiple working groups, and the Fedora Board will continue to set overall strategic direction, but the working groups will be largely autonomous within their own areas. The Groups ---------- We are creating a group for each of the three initial products the Board has approved: * Fedora Workstation * Fedora Server * Fedora Cloud The Board asks that the Working Groups determine their own target audience definition and product description as a first task; the names aren't set in stone. We're also creating groups to focus on the common core, and to work on policies and practices for software operating outside of Fedora's traditional packaging model, alongside the existing (and continuing) Fedora Packaging Committee. * Base Design Working Group * Environments & Software Stacks Working Group Composition ----------- The working groups' initial membership will be chosen by FESCo from volunteers. This message is the request for those volunteers to self-nominate. Each group will have at least one FESCo member, who will act as a liaison to FESCo and as a representative of the group at FESCo meetings. We would like each group to also have representation from other major areas of Fedora - Quality Assurance, Infrastructure, Release Engineering, Documentation, Design, Websites, Ambassadors, Feature Wrangler, Marketing. We don't intend for this to be additional work to current members of those teams; working group members should interact with and augment the existing subprojects. What's Expected --------------- These working groups will be more formal than the existing SIGs, with a documented governing structure and process of operation, voting members, up-to-date and maintained project materials, and regular open communication. All working group members will need to actively participate. The first responsibility will be to establish a governance charter, followed by a product requirements document. We're obviously in the middle of Fedora 20 development, and that's the priority for many of us right now. For that reason, these deliverables won't be required until after the F20 release, but we do want to start organizing as soon as possible. Interlude: Interested in Something Else? ---------------------------------------- Are the projects listed above not your interest? That's fine; you can keep on working the way you are now. Or, perhaps you're interested in a target product, but something different from the ones described above. In that case, you may start a "secondary product" working group following the same model; if that is successful the Fedora Board may elect to promote that product to a primary target. How to Self-Nominate -------------------- To volunteer to serve on one of the new Fedora working groups, simply add yourself to the appropriate section in the wiki page below, along with a brief description of your current involvement with Fedora and plans for participation in this group. <https://fedoraproject.org/wiki/Fedora.next/WG_Nominations> Next Steps ---------- The nomination period will be at least one month from this announcement. FESCo will review the applications, appoint the initial members, and assist with the development of each group's independent governance. -- Matthew Miller ☁☁☁ Fedora Cloud Architect ☁☁☁ <mattdm(a)fedoraproject.org> _______________________________________________ devel-announce mailing list devel-announce(a)lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/devel-announce

10 years, 5 months

32
63
0 / 0

PATH has /bin before /usr/bin in upgraded rawhide

by Sandro Mani

Hi, I just noticed that my rawhide installation, which was originally installed when F18 was rawhide in summer 2012 and upgraded since, has PATH=/bin:/usr/bin:/usr/local/bin:/usr/local/sbin:/usr/sbin:/home/sandro/.local/bin:/home/sandro/bin On a fresh rawhide installation, I get PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/home/sandro/.local/bin:/home/sandro/bin So, the order of /bin /usr/bin /usr/local/bin is reversed. Who is screwing up the order? - /etc/profile, /etc/bashrc and /etc/profile.d/* are identical between the "old" and the "new" installations - strings /bin/bash | grep /bin gives me the same output in both cases - my .bashrc and .bash_profile are harmless (i.e. PATH=$PATH:$HOME/.local/bin:$HOME/bin) Any ideas? Thanks! Sandro

10 years, 5 months

29
90
0 / 0

Status of packages buffer mindi mindi-busybox mondo

by Michael Schwendt

Hello Bruno! A few days ago on Fedora devel@ list, the ancient and stalled Review Request of mindi-busybox has been pointed at. Together with the hint that the submitter is still waiting to be sponsored since five years. That's also the reason I'm posting a copy of this message to devel@ list. When I've had a first look in bugzilla, I've discovered that the ticket has not been displayed properly in the review queue, because it was assigned to a reviewer via the "fedora-review" flag. The review request tracker displays such tickets on a separate page only, http://fedoraproject.org/PackageReviewStatus/ and potential reviewers as well as sponsors assume somebody else is working on the review. There are various reasons why a review may have stalled. Only occasionally somebody makes extra effort to recheck aging tickets. Here, there has been no progress in that ticket at all until recently when it has been discovered. As a next step, I've located a few related review requests, since there are inter-dependencies. I've found: mindi : https://bugzilla.redhat.com/187317 mondo : https://bugzilla.redhat.com/187318 mindi-busybox : https://bugzilla.redhat.com/476234 buffer : https://bugzilla.redhat.com/759818 There is some confusion, and it's not easy to track down the details: 1) Package "buffer" is a re-review, because it has been retired in 2011 after it FTBFS. The re-review had been assigned to the "buffer" component, so it has not been displayed as a Review Request anywhere. 2) It has been questioned why it had been retired. Dist git claims: http://pkgs.fedoraproject.org/cgit/buffer.git/plain/dead.package | This package was retired on 2011-07-25 due to it being unable to | build this package for multiple releases (FTBFS). https://lists.fedoraproject.org/pipermail/scm-commits/2011-July/639234.html But koji shows a successful build on 2011-02-08 as done by Dennis Gilmore for the Fedora 15 mass-rebuild: http://koji.fedoraproject.org/koji/packageinfo?packageID=7297 In July 2011, it has been listed as "orphan", [ACTION REQUIRED] Retiring packages in F-16 (final warning) https://lists.fedoraproject.org/pipermail/devel/2011-July/154622.html and I could not find out its status at that time. Pkgdb activity gets logged to scm-commits@ list, so perhaps somebody else has more luck. 3) In koji, dist git and pkgdb, I've found that user "bcornec" has been an approved packager before *and* even the maintainer of that package: [pkgdb] buffer was added for bcornec https://lists.fedoraproject.org/pipermail/scm-commits/2008-December/23191... an older FTBFS ticket for that maintainer: https://bugzilla.redhat.com/511589 In the Fedora Account System, user "bcornec" is not a member of the "packager" group anymore. What has happened there? 4) In the review queue, the review requests have been submitted using three different e-mail addresses. What's the status/plan with regard to these package review requests? Regards, -- Michael Schwendt (mschwendt) Fedora release 20 (Heisenbug) - Linux 3.12.0-0.rc6.git1.2.fc21.x86_64 loadavg: 0.04 0.12 0.17

10 years, 5 months

1
1
0 / 0

rawhide report: 20131026 changes

by Fedora compose checker

Compose started at Sat Oct 26 08:15:03 UTC 2013 Broken deps for i386 ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.i686 requires libImath.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIexMath.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIex.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libHalf.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6 [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.i686 requires libatlas.so.3 [apbs] apbs-1.3-6.fc20.i686 requires libf77blas.so.3 apbs-1.3-6.fc20.i686 requires libatlas.so.3 [blueman] blueman-1.23-7.fc20.i686 requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.i686 requires gvfs-obexftp [cinepaint] cinepaint-libs-1.3-9.fc19.i686 requires libImath.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIlmThread.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIlmImf.so.7 cinepaint-libs-1.3-9.fc19.i686 requires libIexMath.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIex.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libHalf.so.6 [converseen] converseen-0.6.2-2.fc20.i686 requires libMagick++-6.Q16.so.1 [cp2k] cp2k-2.4-6.fc20.i686 requires libf77blas.so.3 cp2k-2.4-6.fc20.i686 requires libatlas.so.3 cp2k-mpich-2.4-6.fc20.i686 requires libf77blas.so.3 cp2k-openmpi-2.4-6.fc20.i686 requires libf77blas.so.3 [dayplanner] dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4 [derelict] derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod [drawtiming] drawtiming-0.7.1-11.fc20.i686 requires libMagick++-6.Q16.so.1 [ekiga] ekiga-4.0.1-6.fc20.i686 requires libcamel-1.2.so.45 [evolution-mapi] evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45 [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.i686 requires libcamel-1.2.so.45 [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4 [freefem++] freefem++-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-3.19-3.1.fc18.i686 requires libatlas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libatlas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libatlas.so.3 [gfal] gfal-1.16.0-1.fc21.i686 requires libgsoap.so.3 gfal-doc-1.16.0-1.fc21.i686 requires libgsoap.so.3 gfal-python-1.16.0-1.fc21.i686 requires libgsoap.so.3 [glabels] glabels-3.0.1-10.fc21.i686 requires libcamel-1.2.so.45 [gnome-contacts] gnome-contacts-3.10-1.fc21.i686 requires libcamel-1.2.so.45 [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60 [gxine] gxine-0.5.907-10.fc20.i686 requires libxine.so.1 [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [kawa] 1:kawa-1.11-5.fc19.i686 requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.i686 requires libMagick++-6.Q16.so.1 [kyua-cli] kyua-cli-0.5-3.fc19.i686 requires liblutok.so.0 kyua-cli-tests-0.5-3.fc19.i686 requires liblutok.so.0 [libghemical] libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3 libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3 [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.i686 requires libcamel-1.2.so.45 [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.i686 requires libopenobex.so.1 [mail-notification] mail-notification-evolution-plugin-5.4-75.git.eab5c13.fc20.i686 requires libcamel-1.2.so.45 [mpqc] mpqc-2.3.1-23.fc20.i686 requires libf77blas.so.3 mpqc-2.3.1-23.fc20.i686 requires libatlas.so.3 [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.i686 requires libvtksys.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkWidgets.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkVolumeRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkViews.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkTextAnalysis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkParallel.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkInfovis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkImaging.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkIO.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkHybrid.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGraphics.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGeovis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGenericFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCommon.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCharts.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmMSFF.so.2.2 nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmDICT.so.2.2 nifti2dicom-0.4.6-3.fc20.i686 requires libQVTK.so.5.10 [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.i686 requires libopenobex.so.1 [obexftp] obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1 perl-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 python-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 ruby-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 [octave-dicom] octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg8.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg16.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg12.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmMSFF.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmIOD.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmDSED.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmDICT.so.2.2 octave-dicom-0.1.1-5.fc20.i686 requires libgdcmCommon.so.2.2 [openbox] gdm-control-3.5.2-2.fc20.i686 requires gnome-panel gnome-panel-control-3.5.2-2.fc20.i686 requires gnome-panel [ovaldi] ovaldi-5.9.1-7.fc20.i686 requires libxalan-c.so.110 [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [perl-PDL-Graphics-PLplot] perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires perl(:MODULE_COMPAT_5.16.1) perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires libplplotd.so.11 [pion-net] pion-net-4.0.9-8.fc20.i686 requires liblog4cpp.so.4 [python-pandas] python-pandas-0.12.0-1.fc21.i686 requires python-bottleneck [python-scikit-learn] python-scikit-learn-0.14.1-3.fc21.i686 requires libptf77blas.so.3 python-scikit-learn-0.14.1-3.fc21.i686 requires libptcblas.so.3 python-scikit-learn-0.14.1-3.fc21.i686 requires libatlas.so.3 python3-scikit-learn-0.14.1-3.fc21.i686 requires libptf77blas.so.3 python3-scikit-learn-0.14.1-3.fc21.i686 requires libptcblas.so.3 python3-scikit-learn-0.14.1-3.fc21.i686 requires libatlas.so.3 [python-tag] python-tag-2013.1-1.fc20.i686 requires libboost_python.so.1.53.0 [remmina] remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-rail.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-kbd.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-gdi.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-core.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-codec.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-channels.so.1.0 [resource-agents] resource-agents-3.9.5-8.i686 requires /sbin/quotaon resource-agents-3.9.5-8.i686 requires /sbin/quotacheck resource-agents-3.9.5-8.i686 requires /bin/hostname [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [subsurface] subsurface-3.1.1-2.fc20.i686 requires libosmgpsmap.so.2 [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 [tango] tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60 [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [vdsm] vdsm-4.12.1-4.fc21.i686 requires /bin/hostname [xine-plugin] xine-plugin-1.0.2-8.fc20.i686 requires libxine.so.1 Broken deps for x86_64 ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libImath.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIexMath.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libHalf.so.6()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit) [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.x86_64 requires libatlas.so.3()(64bit) [apbs] apbs-1.3-6.fc20.i686 requires libf77blas.so.3 apbs-1.3-6.fc20.i686 requires libatlas.so.3 apbs-1.3-6.fc20.x86_64 requires libf77blas.so.3()(64bit) apbs-1.3-6.fc20.x86_64 requires libatlas.so.3()(64bit) [blueman] blueman-1.23-7.fc20.x86_64 requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.x86_64 requires gvfs-obexftp [cinepaint] cinepaint-libs-1.3-9.fc19.i686 requires libImath.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIlmThread.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIlmImf.so.7 cinepaint-libs-1.3-9.fc19.i686 requires libIexMath.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libIex.so.6 cinepaint-libs-1.3-9.fc19.i686 requires libHalf.so.6 cinepaint-libs-1.3-9.fc19.x86_64 requires libImath.so.6()(64bit) cinepaint-libs-1.3-9.fc19.x86_64 requires libIlmThread.so.6()(64bit) cinepaint-libs-1.3-9.fc19.x86_64 requires libIlmImf.so.7()(64bit) cinepaint-libs-1.3-9.fc19.x86_64 requires libIexMath.so.6()(64bit) cinepaint-libs-1.3-9.fc19.x86_64 requires libIex.so.6()(64bit) cinepaint-libs-1.3-9.fc19.x86_64 requires libHalf.so.6()(64bit) [converseen] converseen-0.6.2-2.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [cp2k] cp2k-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) cp2k-2.4-6.fc20.x86_64 requires libatlas.so.3()(64bit) cp2k-mpich-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) cp2k-openmpi-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) [dayplanner] dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4 [derelict] derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-3-20.20130626gite70c293.fc20.x86_64 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.x86_64 requires tcod [drawtiming] drawtiming-0.7.1-11.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [ekiga] ekiga-4.0.1-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [evolution-mapi] evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45 evolution-mapi-3.10.1-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4 1:fatrat-1.2.0-0.14.beta2.fc20.x86_64 requires liblog4cpp.so.4()(64bit) [freefem++] freefem++-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) [gfal] gfal-1.16.0-1.fc21.i686 requires libgsoap.so.3 gfal-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit) gfal-doc-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit) gfal-python-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit) [glabels] glabels-3.0.1-10.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [gnome-contacts] gnome-contacts-3.10-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60 gtkd-2.0.0-29.20120815git9ae9181.fc18.x86_64 requires libphobos-ldc.so.60()(64bit) [gxine] gxine-0.5.907-10.fc20.x86_64 requires libxine.so.1()(64bit) [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [kawa] 1:kawa-1.11-5.fc19.x86_64 requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [kyua-cli] kyua-cli-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit) kyua-cli-tests-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit) [libghemical] libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3 libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3 libghemical-2.99.1-24.fc20.x86_64 requires libf77blas.so.3()(64bit) libghemical-2.99.1-24.fc20.x86_64 requires libatlas.so.3()(64bit) [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.x86_64 requires libopenobex.so.1()(64bit) [mail-notification] mail-notification-evolution-plugin-5.4-75.git.eab5c13.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [mpqc] mpqc-2.3.1-23.fc20.x86_64 requires libf77blas.so.3()(64bit) mpqc-2.3.1-23.fc20.x86_64 requires libatlas.so.3()(64bit) [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtksys.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkWidgets.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkVolumeRendering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkViews.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkTextAnalysis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkRendering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkParallel.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkInfovis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkImaging.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkIO.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkHybrid.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGraphics.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGeovis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGenericFiltering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkFiltering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCommon.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCharts.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmMSFF.so.2.2()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmDICT.so.2.2()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libQVTK.so.5.10()(64bit) [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.x86_64 requires libopenobex.so.1()(64bit) [obexftp] obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) perl-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) python-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) ruby-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) [octave-dicom] octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg8.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg16.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg12.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmMSFF.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmIOD.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmDSED.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmDICT.so.2.2()(64bit) octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmCommon.so.2.2()(64bit) [openbox] gdm-control-3.5.2-2.fc20.x86_64 requires gnome-panel gnome-panel-control-3.5.2-2.fc20.x86_64 requires gnome-panel [ovaldi] ovaldi-5.9.1-7.fc20.x86_64 requires libxalan-c.so.110()(64bit) [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [perl-PDL-Graphics-PLplot] perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.1) perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires libplplotd.so.11()(64bit) [pion-net] pion-net-4.0.9-8.fc20.i686 requires liblog4cpp.so.4 pion-net-4.0.9-8.fc20.x86_64 requires liblog4cpp.so.4()(64bit) [python-pandas] python-pandas-0.12.0-1.fc21.x86_64 requires python-bottleneck [python-scikit-learn] python-scikit-learn-0.14.1-3.fc21.x86_64 requires libptf77blas.so.3()(64bit) python-scikit-learn-0.14.1-3.fc21.x86_64 requires libptcblas.so.3()(64bit) python-scikit-learn-0.14.1-3.fc21.x86_64 requires libatlas.so.3()(64bit) python3-scikit-learn-0.14.1-3.fc21.x86_64 requires libptf77blas.so.3()(64bit) python3-scikit-learn-0.14.1-3.fc21.x86_64 requires libptcblas.so.3()(64bit) python3-scikit-learn-0.14.1-3.fc21.x86_64 requires libatlas.so.3()(64bit) [python-tag] python-tag-2013.1-1.fc20.x86_64 requires libboost_python.so.1.53.0()(64bit) [remmina] remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-rail.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-kbd.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-gdi.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-core.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-codec.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-channels.so.1.0()(64bit) [resource-agents] resource-agents-3.9.5-8.x86_64 requires /sbin/quotaon resource-agents-3.9.5-8.x86_64 requires /sbin/quotacheck resource-agents-3.9.5-8.x86_64 requires /bin/hostname [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [subsurface] subsurface-3.1.1-2.fc20.x86_64 requires libosmgpsmap.so.2()(64bit) [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit) 1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit) 1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [tango] tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60 tango-2-12.20120821git7b92443.fc19.x86_64 requires libphobos-ldc.so.60()(64bit) [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [vdsm] vdsm-4.12.1-4.fc21.x86_64 requires /bin/hostname [xine-plugin] xine-plugin-1.0.2-8.fc20.x86_64 requires libxine.so.1()(64bit) Broken deps for armhfp ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libImath.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIexMath.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIex.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libHalf.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIex.so.6 [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.armv7hl requires libatlas.so.3 [apbs] apbs-1.3-6.fc20.armv7hl requires libf77blas.so.3 apbs-1.3-6.fc20.armv7hl requires libatlas.so.3 [blueman] blueman-1.23-7.fc20.armv7hl requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.armv7hl requires gvfs-obexftp [cinepaint] cinepaint-libs-1.3-9.fc19.armv7hl requires libImath.so.6 cinepaint-libs-1.3-9.fc19.armv7hl requires libIlmThread.so.6 cinepaint-libs-1.3-9.fc19.armv7hl requires libIlmImf.so.7 cinepaint-libs-1.3-9.fc19.armv7hl requires libIexMath.so.6 cinepaint-libs-1.3-9.fc19.armv7hl requires libIex.so.6 cinepaint-libs-1.3-9.fc19.armv7hl requires libHalf.so.6 [cloud-init] cloud-init-0.7.2-4.fc20.noarch requires dmidecode [cobbler] cobbler-2.4.0-2.fc20.noarch requires syslinux [converseen] converseen-0.6.2-2.fc20.armv7hl requires libMagick++-6.Q16.so.1 [cp2k] cp2k-2.4-6.fc20.armv7hl requires libf77blas.so.3 cp2k-2.4-6.fc20.armv7hl requires libatlas.so.3 cp2k-mpich-2.4-6.fc20.armv7hl requires libf77blas.so.3 cp2k-openmpi-2.4-6.fc20.armv7hl requires libf77blas.so.3 [dayplanner] dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4 [drawtiming] drawtiming-0.7.1-11.fc20.armv7hl requires libMagick++-6.Q16.so.1 [ekiga] ekiga-4.0.1-6.fc20.armv7hl requires libcamel-1.2.so.45 [evolution-mapi] evolution-mapi-3.10.1-1.fc21.armv7hl requires libcamel-1.2.so.45 [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.armv7hl requires libcamel-1.2.so.45 [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.armv7hl requires liblog4cpp.so.4 [fence-agents] fence-agents-common-4.0.3-1.fc21.armv7hl requires pexpect [gfal] gfal-1.16.0-1.fc21.armv7hl requires libgsoap.so.3 gfal-doc-1.16.0-1.fc21.armv7hl requires libgsoap.so.3 gfal-python-1.16.0-1.fc21.armv7hl requires libgsoap.so.3 [glabels] glabels-3.0.1-10.fc21.armv7hl requires libcamel-1.2.so.45 [gnome-contacts] gnome-contacts-3.10-1.fc21.armv7hl requires libcamel-1.2.so.45 [gnome-do-plugins] gnome-do-plugins-thunderbird-0.8.4-14.fc20.armv7hl requires thunderbird [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-geany-tags-2.0.0-29.20120815git9ae9181.fc18.noarch requires gtkd = 0:2.0.0-29.20120815git9ae9181.fc18 [gxine] gxine-0.5.907-10.fc20.armv7hl requires libxine.so.1 [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [ipython] python-ipython-console-0.13.2-2.fc20.noarch requires pexpect python3-ipython-console-0.13.2-2.fc20.noarch requires python3-pexpect [kawa] 1:kawa-1.11-5.fc19.armv7hl requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.armv7hl requires libMagick++-6.Q16.so.1 [kyua-cli] kyua-cli-0.5-3.fc19.armv7hl requires liblutok.so.0 kyua-cli-tests-0.5-3.fc19.armv7hl requires liblutok.so.0 [libghemical] libghemical-2.99.1-24.fc20.armv7hl requires libf77blas.so.3 libghemical-2.99.1-24.fc20.armv7hl requires libatlas.so.3 [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.armv7hl requires libcamel-1.2.so.45 [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.armv7hl requires libopenobex.so.1 [mail-notification] mail-notification-evolution-plugin-5.4-75.git.eab5c13.fc20.armv7hl requires libcamel-1.2.so.45 [mozilla-firetray] mozilla-firetray-thunderbird-0.3.6-0.5.143svn.fc18.1.armv7hl requires thunderbird >= 0:11 [mpqc] mpqc-2.3.1-23.fc20.armv7hl requires libf77blas.so.3 mpqc-2.3.1-23.fc20.armv7hl requires libatlas.so.3 [msp430-libc] msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3 [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtksys.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkWidgets.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkVolumeRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkViews.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkTextAnalysis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkParallel.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkInfovis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkImaging.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkIO.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkHybrid.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGraphics.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGeovis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGenericFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCommon.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCharts.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmMSFF.so.2.2 nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmDICT.so.2.2 nifti2dicom-0.4.6-3.fc20.armv7hl requires libQVTK.so.5.10 [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.armv7hl requires libopenobex.so.1 [obexftp] obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.armv7hl requires libopenobex.so.1 perl-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 python-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 ruby-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 [octave-dicom] octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg8.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg16.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg12.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmMSFF.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmIOD.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmDSED.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmDICT.so.2.2 octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmCommon.so.2.2 [openbox] gdm-control-3.5.2-2.fc20.armv7hl requires gnome-panel gnome-panel-control-3.5.2-2.fc20.armv7hl requires gnome-panel [ovaldi] ovaldi-5.9.1-7.fc20.armv7hl requires libxalan-c.so.110 [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [pion-net] pion-net-4.0.9-8.fc20.armv7hl requires liblog4cpp.so.4 [pure] pure-doc-0.57-4.fc20.noarch requires pure = 0:0.57-4.fc20 [python-pandas] python-pandas-0.12.0-1.fc21.armv7hl requires python-bottleneck [python-scikit-learn] python-scikit-learn-0.14.1-3.fc21.armv7hl requires libptf77blas.so.3 python-scikit-learn-0.14.1-3.fc21.armv7hl requires libptcblas.so.3 python-scikit-learn-0.14.1-3.fc21.armv7hl requires libatlas.so.3 python3-scikit-learn-0.14.1-3.fc21.armv7hl requires libptf77blas.so.3 python3-scikit-learn-0.14.1-3.fc21.armv7hl requires libptcblas.so.3 python3-scikit-learn-0.14.1-3.fc21.armv7hl requires libatlas.so.3 [python-tag] python-tag-2013.1-1.fc20.armv7hl requires libboost_python.so.1.53.0 [remmina] remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-rail.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-kbd.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-gdi.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-core.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-codec.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-channels.so.1.0 [resource-agents] resource-agents-3.9.5-8.armv7hl requires /sbin/quotaon resource-agents-3.9.5-8.armv7hl requires /sbin/quotacheck resource-agents-3.9.5-8.armv7hl requires /bin/hostname [rootplot] rootplot-2.2.1-7.fc19.noarch requires root-python [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [sigul] sigul-0.100-3.fc20.noarch requires pexpect [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [spring-installer] ca-installer-20090316-14.fc20.armv7hl requires spring spring-installer-20090316-14.fc20.armv7hl requires spring [spring-maps-default] spring-maps-default-0.1-11.fc20.noarch requires spring [springlobby] springlobby-0.169-5.fc20.armv7hl requires spring [stylus-toolbox] stylus-toolbox-0.2.7-6.fc20.noarch requires pexpect [subsurface] subsurface-3.1.1-2.fc20.armv7hl requires libosmgpsmap.so.2 [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1 1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45 [syntastic] syntastic-d-2.3.0-11.20120917git72856e6.fc20.noarch requires ldc [tango] tango-doc-2-12.20120821git7b92443.fc19.noarch requires tango-devel = 0:2-12.20120821git7b92443.fc19 tango-geany-tags-2-12.20120821git7b92443.fc19.noarch requires tango = 0:2-12.20120821git7b92443.fc19 [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [vdsm] vdsm-4.12.1-4.fc21.armv7hl requires /bin/hostname [xine-plugin] xine-plugin-1.0.2-8.fc20.armv7hl requires libxine.so.1 [yumex] yumex-3.0.13-1.fc21.noarch requires python-pexpect New package: admesh-0.97.2-1.fc21 Diagnose and/or repair problems with STereo Lithography files New package: aspell-fi-0.7-2.fc21 Finnish dictionaries for Aspell New package: aspell-la-20020503-1.fc21 Latin dictionaries for Aspell New package: general-purpose-preprocessor-2.24-3.fc21 Customizable language-agnostic preprocessor New package: gnome-directory-thumbnailer-0.1.0-3.fc21 Thumbnailer for directories New package: jboss-batch-1.0-api-1.0.0-1.fc21 Batch Applications 1.0 API New package: jline1-1.0-6.fc21 Java library for reading and editing user input in console applications New package: lpf-0-8.ff50a5b.fc21 Local package factory - build non-redistributable rpms New package: lpf-spotify-client-0.9.4.183.g644e24e.428-2.fc21 Spotify music player native client package bootstrap New package: otf2-1.2.1-4.fc21 Open Trace Format 2 library New package: python-irawadi-user-0.1-6.fc21 Python Library for manage system user in Linux New package: python-pylcdsysinfo-0-0.8.20131014git.fc21 Python interface to Coldtears Electronics LCD Sys Info device Removed package: python-logilab-astng-0.24.1-3.fc20 Removed package: schlichtherle-oss-parent-21-3.fc21 Updated Packages: InsightToolkit-4.4.2-3.fc21 --------------------------- * Fri Oct 25 2013 Sebastian Pölsterl <sebp(a)k-d-w.org> - 4.4.2-3 - Removed HDF5 patch that seems to interfere with cmake 2.8.12 * Tue Oct 22 2013 Sebastian Pölsterl <sebp(a)k-d-w.org> - 4.4.2-2 - Rebuilt for gdcm 2.4.0 Size change: -119 bytes ReviewBoard-1.7.16-2.fc21 ------------------------- * Sun Oct 13 2013 Patrick Uiterwijk <puiterwijk(a)gmail.com> - 1.7.16-2 - Update Djblets version Size change: 102 bytes abiword-3.0.0-3.fc21 -------------------- * Fri Oct 25 2013 Peter Robinson <pbrobinson(a)fedoraproject.org> 1:3.0.0-3 - Update icon cache on install/update/erase Size change: 219 bytes anaconda-21.3-1.fc21 -------------------- * Fri Oct 25 2013 Brian C. Lane <bcl(a)redhat.com> - 21.3-1 - Reset _proxyChange when a change is triggered (bcl) - Setup No Update checkbox correctly (#1016801) (bcl) - Fall back to closest mirror in source (#1016801) (bcl) - anaconda-dracut: fix ks failure with hd:<dev>:some/path.ks (wwoods) - Make sure lower bound for resize is applied. (#986575) (dlehman) - Use devicetree to resolve device specs in kickstart. (#1022206) (dlehman) - Disregard raid level combo when it isn't applicable. (#1022203) (dlehman) - Mountpoint is an attr of the format, not the device. (#892747) (dlehman) - Add bootloader execute before autopart (#1021258) (bcl) - Do error checking of repository names on "Installation Source" screen. (amulhern) - Avoid configure-event loops. (#1021511) (dshea) Size change: 37208 bytes beesu-2.7-13.fc21 ----------------- * Wed Sep 25 2013 D. Charles Pyle <dcharlespyle(a)msn.com> and Bee <http://www.honeybeenet.altervista.org> - 2.7-13 - Bug fixes gedit-beesu-plugin and beesu scripts to stop crashing of GNOME Shell and added a require of usermode-gtk. - Bug fixes to nemo scripts and nautilus scripts. Size change: -691 bytes binutils-2.24-4.fc21 -------------------- * Fri Oct 25 2013 Nick Clifton <nickc(a)redhat.com> - 2.24-4 - Update binutils 2.24 snapshot. - Stop NM from halting if it encounters a file with no symbols when displaying dynamic symbols in multiple files. (#1022845) Size change: -1777 bytes bookkeeper-4.2.1-5.fc21 ----------------------- Size change: -1014 bytes cinnamon-2.0.6-1.fc21 --------------------- * Fri Oct 25 2013 Leigh Scott <leigh123linux(a)googlemail.com> - 2.0.6-1 - update to 2.0.6 Size change: 10809 bytes cinnamon-control-center-2.0.5-1.fc21 ------------------------------------ * Fri Oct 25 2013 Leigh Scott <leigh123linux(a)googlemail.com> - 2.0.5-1 - update to 2.0.5 Size change: -971 bytes cinnamon-settings-daemon-2.0.5-1.fc21 ------------------------------------- * Fri Oct 25 2013 Leigh Scott <leigh123linux(a)googlemail.com> - 2.0.5-1 - update to 2.0.5 Size change: -1120 bytes condor-8.1.1-0.3.fc21 --------------------- * Fri Oct 25 2013 Timothy St. Clair <tstclair(a)redhat.com> - 8.1.1-0.3 - Patch for workaround on BZ1000106 Size change: -18135 bytes eclipse-4.3.1-9.fc21 -------------------- * Fri Oct 25 2013 Krzysztof Daniel <kdaniel(a)redhat.com> 1:4.3.1-9 - Do mark *.so as executable. * Fri Oct 25 2013 Krzysztof Daniel <kdaniel(a)redhat.com> 1:4.3.1-8 - Mark *.so as executable. Size change: 225 bytes eclipse-wtp-sourceediting-3.5.1-2.fc21 -------------------------------------- * Sat Oct 12 2013 Gerard Ryan <galileo(a)fedoraproject.org> - 3.5.1-2 - Rebuild for f20+ Size change: 104 bytes gnome-session-3.10.1-1.fc21 --------------------------- * Mon Oct 14 2013 Richard Hughes <rhughes(a)redhat.com> - 3.10.1-1 - Update to 3.10.1 Size change: -6721 bytes gnome-shell-3.10.1-2.fc21 ------------------------- * Fri Oct 25 2013 Florian Müllner <fmuellner(a)redhat.com> - 3.10.1-2 - Rebuild for new e-d-s Size change: 90 bytes gnu-efi-3.0u-0.2.fc20 --------------------- Size change: 1105 bytes gnutls-3.1.15-1.fc21 -------------------- * Fri Oct 25 2013 Tomáš Mráz <tmraz(a)redhat.com> 3.1.15-1 - new upstream release - fixes CVE-2013-4466 buffer overflow in handling DANE entries Size change: 5170 bytes groovy-1.8.9-6.fc21 ------------------- * Thu Oct 24 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 1.8.9-6 - Migrate from jline to jline1 - Resolves: rhbz#1022969 Size change: -951 bytes gsettings-desktop-schemas-3.10.1-1.fc21 --------------------------------------- * Wed Oct 16 2013 Richard Hughes <rhughes(a)redhat.com> - 3.10.1-1 - Update to 3.10.1 Size change: 805 bytes iperf3-3.0-1.fc21 ----------------- * Fri Oct 25 2013 Steven Roberts <strobert(a)strobe.net> 3.0-1 - Update to 3.0 Size change: 7628 bytes jarjar-1.4-6.fc21 ----------------- * Fri Oct 25 2013 Vít Ondruch <vondruch(a)redhat.com> - 1.4-6 - Fix alias to com.googlecode.jarjar:jarjar. Size change: 121 bytes javanotes-5.1-9.fc21 -------------------- * Fri Oct 25 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 5.1-9 - Install to %{_pkgdocdir} where available (#993845). - Fix bogus date in %changelog. Size change: -850 bytes javasqlite-20130214-3.fc21 -------------------------- * Fri Oct 25 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 20130214-3 - Depend on headless java where available. - Drop aarch64 specfile cruft, rely on %configure (#951442). Size change: -900 bytes jing-trang-20091111-15.fc21 --------------------------- * Fri Oct 25 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 20091111-15 - Depend on headless JRE where available. Size change: -944 bytes kernel-3.12.0-0.rc6.git4.1.fc21 ------------------------------- * Fri Oct 25 2013 Josh Boyer <jwboyer(a)fedoraproject.org> - 3.12.0-0.rc6.git4.1 - Linux v3.12-rc6-292-g4208c47 * Thu Oct 24 2013 Peter Robinson <pbrobinson(a)fedoraproject.org> - Add patch for i.MX6 Utilite device dtb Size change: -848 bytes kid3-3.0-1.fc21 --------------- * Fri Oct 25 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 3.0-1 - Update to 3.0. Size change: -8349 bytes libpgf-6.12.27-0.2.svn119.fc21 ------------------------------ * Fri Oct 25 2013 Alexey Kurov <nucleo(a)fedoraproject.org> - 6.12.27-0.2.svn119 - disable OpenMP * Fri Oct 25 2013 Alexey Kurov <nucleo(a)fedoraproject.org> - 6.12.27-0.1.svn119 - libpgf-6.12.27 r119 snapshot Size change: -1813 bytes libtar-1.2.20-3.fc21 -------------------- * Fri Oct 25 2013 Kamil Dudka <kdudka(a)redhat.com> - 1.2.20-3 - avoid using a static buffer in th_get_pathname() Size change: 1060 bytes mate-doc-utils-1.6.2-1.fc21 --------------------------- * Fri Oct 25 2013 Wolfgang Ulbrich <chat-to-me(a)raveit.de> - 1.6.2-1 - update to 1.6.2 release - sort spec file - use modern 'make install' macro - clean up BR's - remove debian sript removal, no need anymore - fix %{buildroot} vs $RPM_BUILD_ROOT mismatch Size change: 8094 bytes mate-notification-daemon-1.6.1-1.fc21 ------------------------------------- * Fri Oct 25 2013 Wolfgang Ulbrich <chat-to-me(a)raveit.de> - 1.6.1-1 - update to 1.6.1 release Size change: 180433 bytes nagios-3.5.1-4.fc21 ------------------- * Fri Oct 25 2013 Peter Lemenkov <lemenkov(a)gmail.com> - 3.5.1-4 - Fixed main binary permissions Size change: 143 bytes nagstamon-0.9.11-1.fc21 ----------------------- * Mon Sep 16 2013 Nikita Klimov <nk(a)jaur.su> 0.9.11-1 - Updated to 0.9.11 - Updated description Size change: 2374 bytes opengrok-0.9-7.fc21 ------------------- * Thu Oct 24 2013 Lubomir Rintel <lkundrak(a)v3.sk> - 0.9-7 - Bulk sad and useless attempt at consistent SPEC file formatting - Require ant instead of ant-nodeps * Sat Aug 03 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 0.9-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild Size change: -850 bytes openssh-6.3p1-4.fc21 -------------------- * Fri Oct 25 2013 Petr Lautrbach <plautrba(a)redhat.com> 6.3p1-4 + 0.9.3-6 - rebuild with the openssl with the ECC support Size change: 139 bytes openstack-puppet-modules-2013.2-4.fc21 -------------------------------------- * Fri Oct 25 2013 Martin Mágr <mmagr(a)redhat.com> - 2013.2-4 - Added puppet-ceilometer, puppetlabs-mongodb, puppet-heat and puppet-pacemaker - Synchronized modules with current state in package packstack-modules-puppet Size change: 46166 bytes perl-Archive-Tar-1.96-1.fc21 ---------------------------- * Fri Oct 25 2013 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.96-1 - 1.96 bump Size change: -370 bytes perl-Text-Autoformat-1.669004-1.fc21 ------------------------------------ * Fri Oct 25 2013 Paul Howarth <paul(a)city-fan.org> - 1.669004-1 - Update to 1.669004 - Tweaked widow handling to avoid a nasty edge case - Specify all dependencies - Replace provides filter with a patch that works right back to EL-5 - Don't need to remove empty directories from the buildroot - Drop %defattr, redundant since rpm 4.4 - Make %files list more explicit - Don't use macros for commands Size change: 487 bytes perl-Text-Diff-HTML-0.07-1.fc21 ------------------------------- * Fri Oct 25 2013 Paul Howarth <paul(a)city-fan.org> - 0.07-1 - Update to 0.07 - Moved to http://github.com/theory/text-diff-html/ - Switched to a static README.md, rather than a generated README - Specify all dependencies - Drop %defattr, redundant since rpm 4.4 - Make %files list more explicit - Don't need to remove empty directories from the buildroot - Don't use macros for commands Size change: 214 bytes postgis-2.1.0-2.fc21 -------------------- * Fri Oct 25 2013 Dan Horák <dan[at]danny.cz> - 2.1.0-2 - fix build on non-x86 64-bit arches Size change: 143 bytes pptp-1.8.0-1.fc21 ----------------- * Fri Oct 25 2013 Jaroslav Škarvada <jskarvad(a)redhat.com> - 1.8.0-1 - New version Resolves: rhbz#1022685 - Dropped compat, ip-path, pptpsetup, makedeps, parallel-build, pptpsetup-encrypt, waitpid, conn-free, conn-free2, call-disconnect-notify, nohostroute-option, fsf-update sign-compare, unused, prototype, nested-externs, aliasing options.pptp, so_mark, const, field-init patches (all upstreamed) Size change: -18944 bytes pykickstart-1.99.44-1.fc21 -------------------------- * Fri Oct 25 2013 Chris Lumens <clumens(a)redhat.com> - 1.99.44-1 - method getattr should default to handler.url (bcl) Related: rhbz#1016801 Size change: 371 bytes pyqt-mail-checker-2.0.5-1.fc21 ------------------------------ * Sat Sep 14 2013 Fl@sh <kaperang07(a)gmail.com> - 2.0.5-1 - version updated; * Wed Aug 14 2013 Fl@sh <kaperang07(a)gmail.com> - 2.0.3-1 - version updated; - improved spec & Makefile Size change: -664 bytes pysdm-0.4.1-7.fc21 ------------------ Size change: -1105 bytes python-amqp-1.3.1-1.fc21 ------------------------ * Fri Oct 25 2013 Eric Harney <eharney(a)redhat.com> - 1.3.1-1 - Update to 1.3.1 Size change: 186 bytes python-blivet-0.25-1.fc21 ------------------------- * Fri Oct 25 2013 Brian C. Lane <bcl(a)redhat.com> - 0.25-1 - Remove requirement for btrfsctl which no longer exists. (#1012504) (dlehman) - Allow for adjustment of factory vg after removal of thin pool. (#1021890) (dlehman) - Add boot description for "disk" devices on s390. (#867777, #903237, #960143) (sbueno+anaconda) - Add initial spport for aarch64 as we only plan to support UEFI this should be enough (dennis) Size change: -25477 bytes python-rhsm-1.10.5-1.fc21 ------------------------- * Fri Oct 25 2013 ckozak <ckozak(a)redhat.com> 1.10.5-1 - 1006748: replace simplejson with 'ourjson' (alikins(a)redhat.com) - Log the new requestUuid from candlepin if it is present in the response. (dgoodwin(a)redhat.com) * Fri Oct 25 2013 ckozak <ckozak(a)redhat.com> - 1006748: replace simplejson with 'ourjson' (alikins(a)redhat.com) - Log the new requestUuid from candlepin if it is present in the response. (dgoodwin(a)redhat.com) Size change: 657 bytes python-tahrir-0.4.3-1.fc21 -------------------------- * Fri Oct 25 2013 Ralph Bean <rbean(a)redhat.com> - 0.4.3-1 - Many new changes: - Reporting system. - User profile editing. - Rss feed of new badges. - Login tracking - FOAF fixes. - Version in footer. - Diff users. - Show date badge was awarded. - Fix bad link on badge page. - Drop old patches. Size change: 6481 bytes python-tahrir-api-0.4.0-1.fc21 ------------------------------ * Fri Oct 25 2013 Ralph Bean <rbean(a)redhat.com> - 0.4.0-1 - Latest upstream. - Keep track of logins. - Return leaderboard as an ordereddict Size change: 7977 bytes qt5-qtgraphicaleffects-5.2.0-0.3.beta1.fc21 ------------------------------------------- * Thu Oct 24 2013 Rex Dieter <rdieter(a)fedoraproject.org> 5.2.0-0.3.beta1 - 5.2.0-beta1 * Thu Oct 24 2013 Rex Dieter <rdieter(a)fedoraproject.org> 5.2.0-0.2.alpha - ppc bootstrap Size change: -350 bytes rsnapshot-1.3.1-12.fc21 ----------------------- * Tue Sep 10 2013 Steven Roberts <strobert(a)strobe.net> - 1.3.1-12 - added lvm-quiet patch to correct lvremove handling. bug 1005911 Size change: -304 bytes rubygem-qpid_messaging-0.24.2-1.fc21 ------------------------------------ * Fri Oct 25 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.24.2-1 - Rebased on qpid_messaging 0.24.2. - Fixed ordering of caught exceptions from C++. * Fri Oct 25 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.24.1-2 - Removed the ARM exclusion. * Fri Oct 25 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.24.1-1 - Rebased on qpid_messaging 0.24.1. Size change: 5988 bytes setup-2.8.73-1.fc21 ------------------- * Fri Oct 25 2013 Ondrej Vasik <ovasik(a)redhat.com> 2.8.73-1 - sync services with latest IANA Size change: 1049 bytes shim-0.5-1.fc20 --------------- * Fri Oct 04 2013 Peter Jones <pjones(a)redhat.com> - 0.5-1 - Update to 0.5 Size change: 296790 bytes shim-signed-0.5-1.fc20 ---------------------- * Thu Oct 24 2013 Peter Jones <pjones(a)redhat.com> - 0.5-1 - Update to shim 0.5 Size change: 7535 bytes subscription-manager-1.10.5-1.fc21 ---------------------------------- * Fri Oct 25 2013 ckozak <ckozak(a)redhat.com> 1.10.5-1 - 1021581: account/contract display nothing when no data exists (ckozak(a)redhat.com) - Swap heading of selectsla/confirmsubs widgets. (alikins(a)redhat.com) - 1006748: replace simplejson with 'ourjson' (alikins(a)redhat.com) * Thu Oct 17 2013 ckozak <ckozak(a)redhat.com> 1.10.4-1 - 1017351: ignore dbus failures on show_window (alikins(a)redhat.com) - 1016643: Fix firstboot issues with new firstboot. (alikins(a)redhat.com) - 1005420: adding --ondate to manpage (dlackey(a)redhat.com.com) - 1007580: Add contract number to the output of list --available (bkearney(a)redhat.com) - 1017299: handle dmidecode module not installed (alikins(a)redhat.com) - 846331: Add tooltips to the filters page (bkearney(a)redhat.com) - 1015553: fix help message for no-overlap. display usage requirement (ckozak(a)redhat.com) Size change: 3135 bytes supybot-fedmsg-0.0.7-1.fc21 --------------------------- * Fri Oct 25 2013 Ralph Bean <rbean(a)redhat.com> - 0.0.7-1 - Latest upstream - Protect against double-wrapping. - Add meeting owner to the list of chairs by default. Size change: -577 bytes sysstat-10.1.7-1.fc21 --------------------- * Fri Oct 25 2013 Peter Schiffer <pschiffe(a)redhat.com> - 10.1.7-1 - resolves: #1007794 updated to 10.1.7 Size change: 1657 bytes system-config-printer-1.4.3-2.fc21 ---------------------------------- * Fri Oct 25 2013 Tim Waugh <twaugh(a)redhat.com> 1.4.3-2 - Fixed typo in D-Bus signature decorator (bug #1023449). Size change: 569 bytes termit-2.9.6-4.fc21 ------------------- * Fri Oct 25 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 2.9.6-4 - Clean up obsolete docdir comments (#993900). - Fix bogus dates in %changelog. Size change: -900 bytes texlive-2013-3.20131021_r31961.fc21 ----------------------------------- * Fri Oct 25 2013 Jindrich Novy <novyjindrich(a)gmail.com> - 2013-3-20131021 - improve obsoletion automatism (#1022291, #1022746) Size change: 1312308 bytes upower-0.9.23-1.fc21 -------------------- * Fri Oct 18 2013 Richard Hughes <rhughes(a)redhat.com> - 0.9.23-1 - New upstream release - Add missing dbus-glib-1 to private requires - Avoid trying to close fd that wasn't opened - Disable Watts-Up devices by default - Don't guess discharging state for devices - Fix crasher calling _about_to_sleep_sync() - Really don't overwrite retval with prop values - Update and correct Toshiba recall list * Wed Oct 09 2013 Bastien Nocera <bnocera(a)redhat.com> 0.9.22-1 - Update to 0.9.22 - Fixes incorrect reporting of some properties - Fixes battery values for Logitech unifying devices - Bluetooth input devices support - Device name fixes Size change: 4031 bytes vdpauinfo-0.1-1.fc21 -------------------- * Fri Oct 25 2013 Nicolas Chauvet <kwizart(a)gmail.com> - 0.1-1 - Update to 0.1 Size change: 4236 bytes wordpress-3.7-1.fc21 -------------------- * Fri Oct 25 2013 Remi Collet <rcollet(a)redhat.com> - 3.7-1 - update to 3.7 - requires ca-certificates for ca-bundle.crt Size change: 564735 bytes xemacs-21.5.34-3.fc21 --------------------- * Fri Oct 25 2013 Jerry James <loganjerry(a)gmail.com> - 21.5.34-3 - Update the -utf8-fonts patch to remove more references to iso8859 fonts Size change: 559 bytes xfce4-mailwatch-plugin-1.2.0-2.fc21 ----------------------------------- * Fri Oct 25 2013 Christoph Wickert <cwickert(a)fedoraproject.org> - 1.2-0-2 - Fix the icon in the panel's "Add new Item" dialog * Fri Oct 25 2013 Christoph Wickert <cwickert(a)fedoraproject.org> - 1.2.0-1 - Update to 1.2.0 - Remove upstreamed/obsolete patches * Sun Aug 04 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 1.1.0-16 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild Size change: -155874 bytes xorg-x11-drv-apm-1.2.5-10.fc21 ------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.2.5-10 - ABI rebuild Size change: -1030 bytes xorg-x11-drv-armsoc-0.6.0-0.2.f245da3.fc21 ------------------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.6.0-0.2.f245da3 - ABI rebuild Size change: 93 bytes xorg-x11-drv-ati-7.2.0-1.fc21 ----------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 7.2.0-1 - ABI rebuild Size change: -39833 bytes xorg-x11-drv-cirrus-1.5.2-2.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.5.2-2 - ABI rebuild Size change: 76 bytes xorg-x11-drv-dummy-0.3.6-12.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.3.6-12 - ABI rebuild Size change: -1037 bytes xorg-x11-drv-evdev-2.8.2-2.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 2.8.2-2 - ABI rebuild Size change: 76 bytes xorg-x11-drv-fbdev-0.4.3-11.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.4.3-11 - ABI rebuild Size change: -1034 bytes xorg-x11-drv-geode-2.11.14-9.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> 2.11.14-9 - Fix FTBFS against 1.15 * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 2.11.14-8 - ABI rebuild Size change: -575 bytes xorg-x11-drv-glint-1.2.8-9.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.2.8-9 - ABI rebuild Size change: -1032 bytes xorg-x11-drv-i128-1.3.6-10.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.3.6-10 - ABI rebuild Size change: -1032 bytes xorg-x11-drv-i740-1.3.4-10.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.3.4-10 - ABI rebuild Size change: -1033 bytes xorg-x11-drv-intel-2.21.15-7.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 2.21.15-7 - ABI rebuild * Thu Oct 24 2013 Adam Jackson <ajax(a)redhat.com> 2.21.15-6 - Disable UMS support in F21+ Size change: 179 bytes xorg-x11-drv-ivtv-1.2.0-0.7.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.2.0-0.7 - ABI rebuild Size change: -1030 bytes xorg-x11-drv-keyboard-1.7.0-3.fc21 ---------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.7.0-3 - ABI rebuild Size change: -1031 bytes xorg-x11-drv-mach64-6.9.4-8.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 6.9.4-8 - ABI rebuild Size change: -1034 bytes xorg-x11-drv-mga-1.6.2-9.fc21 ----------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.6.2-9 - ABI rebuild Size change: -1039 bytes xorg-x11-drv-modesetting-0.8.0-5.fc21 ------------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.8.0-5 - ABI rebuild * Thu Oct 24 2013 Adam Jackson <ajax(a)redhat.com> - 0.8.0-4 - ABI rebuild Size change: 140 bytes xorg-x11-drv-mouse-1.9.0-3.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.9.0-3 - ABI rebuild Size change: -1035 bytes xorg-x11-drv-neomagic-1.2.8-2.fc21 ---------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.2.8-2 - ABI rebuild Size change: 76 bytes xorg-x11-drv-nouveau-1.0.9-3.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1:1.0.9-3 - ABI rebuild Size change: 71 bytes xorg-x11-drv-omap-0.4.3-9.fc21 ------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.4.3-9 - ABI rebuild Size change: -1036 bytes xorg-x11-drv-openchrome-0.3.3-3.fc21 ------------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.3.3-3 - ABI rebuild Size change: -1026 bytes xorg-x11-drv-qxl-0.1.1-3.fc21 ----------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.1.1-3 - ABI rebuild Size change: 70 bytes xorg-x11-drv-r128-6.9.1-7.fc21 ------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 6.9.1-7 - ABI rebuild Size change: -1026 bytes xorg-x11-drv-rendition-4.2.5-10.fc21 ------------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 4.2.5-10 - ABI rebuild Size change: -1030 bytes xorg-x11-drv-s3virge-1.10.6-10.fc21 ----------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.10.6-10 - ABI rebuild Size change: -1038 bytes xorg-x11-drv-savage-2.3.6-10.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 2.3.6-10 - ABI rebuild Size change: -1029 bytes xorg-x11-drv-siliconmotion-1.7.7-9.fc21 --------------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.7.7-9 - ABI rebuild Size change: -1031 bytes xorg-x11-drv-sis-0.10.7-10.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.10.7-10 - ABI rebuild Size change: -1024 bytes xorg-x11-drv-sisusb-0.9.6-10.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.9.6-10 - ABI rebuild Size change: -1035 bytes xorg-x11-drv-synaptics-1.7.1-6.fc21 ----------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.7.1-6 - ABI rebuild Size change: -1032 bytes xorg-x11-drv-tdfx-1.4.5-9.fc21 ------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.4.5-9 - ABI rebuild Size change: -1033 bytes xorg-x11-drv-trident-1.3.6-10.fc21 ---------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.3.6-10 - ABI rebuild Size change: -1036 bytes xorg-x11-drv-v4l-0.2.0-32.fc21 ------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.2.0-32 - ABI rebuild Size change: -1035 bytes xorg-x11-drv-vesa-2.3.2-11.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 2.3.2-11 - ABI rebuild Size change: -1032 bytes xorg-x11-drv-vmmouse-13.0.0-7.fc21 ---------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 13.0.0-7 - ABI rebuild Size change: -1031 bytes xorg-x11-drv-vmware-13.0.1-4.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 13.0.1-4 - ABI rebuild * Thu Oct 24 2013 Adam Jackson <ajax(a)redhat.com> 13.0.1-3 - xserver 1.15 API compat Size change: -350 bytes xorg-x11-drv-void-1.4.0-20.fc21 ------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.4.0-20 - ABI rebuild Size change: -1030 bytes xorg-x11-drv-voodoo-1.2.5-10.fc21 --------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 1.2.5-10 - ABI rebuild Size change: -1033 bytes xorg-x11-drv-wacom-0.23.0-2.fc21 -------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.23.0-2 - ABI rebuild Size change: 75 bytes xorg-x11-glamor-0.5.1-3.20131009gitba209eee.fc21 ------------------------------------------------ * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> - 0.5.1-3.20131009gitba209eee - -ABI rebuild * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> 0.5.1-2 - Add xserver ABI version interlocks Size change: 245 bytes xorg-x11-server-1.14.99.3-1.20131021.fc21 ----------------------------------------- * Fri Oct 25 2013 Adam Jackson <ajax(a)redhat.com> 1.14.99.3-1 - xserver 1.14.99.3 - xwayland branch refresh - Drop some F17-era Obsoletes - Update BuildReqs to match reality Size change: 32248 bytes znc-1.2-0.4.rc2.fc21 -------------------- * Fri Oct 25 2013 Nick Bebout <nb(a)fedoraproject.org> - 1.2-0.4.rc2 - Upgrade to 1.2-rc2 Size change: 2759 bytes zookeeper-3.4.5-14.fc21 ----------------------- * Fri Oct 25 2013 Timothy St. Clair <tstclair(a)redhat.com> - 3.4.5-14 - Update dependencies to jline1 Size change: 114 bytes zsh-5.0.2-7.fc21 ---------------- * Sat Oct 26 2013 Dominic Hopf <dmaphy(a)fedoraproject.org> - 5.0.2-7 - Require hostname package instead of /bin/hostname * Tue Oct 22 2013 Dominic Hopf <dmaphy(a)fedoraproject.org> - 5.0.2-6 - remove systemd completion, it delivers it's own now (RHBZ#1022039) Size change: -12342 bytes Summary: Added Packages: 12 Removed Packages: 2 Modified Packages: 110 Size of added packages: 5910038 (5.6 M) Size change of modified packages: 2224703 (2.1 M) Size of removed packages: 120455 (118 k) Size change: 8014286 (7.6 M) Compose finisheded at Sat Oct 26 14:18:53 UTC 2013

10 years, 5 months

2
1
0 / 0

Fatal flaw in the udev paradigm?

by rrankin＠ihug.com.au

I have run into an issue which seems to call into question the udev paradigm for USB devices. In my case it has ramifications in ModemManager and gpsd packages, but I see it as a fundamental problem with udev which is in all current versions of Fedora. My USB GPS is a BU-353 which uses a pl2303 USB-Serial Controller (idVendor=067b, idProduct=2303). However, bugzilla report 878737 indicates this same interface chip is used on other devices such as RS232-USB adapters. If the device is a GPS you do not want ModemManager run on it (bugzilla 1023234) but you do want gpsctl to tell gpsd about it when it is plugged in. If it is a RS232 adapter the opposite is true (bugzilla 878737). Note that it is reported that the DU-353 can be bricked if the wrong thing is written to it. After looking at the lsusb -v output for my BU-353 and the output for RS232 devices reported on the net, I do not see any way to distinguish between the two different types of devices that udev could use to tell them apart. Unless I am missing something this seems like a fatal flaw in the udev paradigm. Regards Roy Rankin

10 years, 5 months

11
13
0 / 0

[Test-Announce] Fedora 20 Beta to slip by one week

by Jaroslav Reznik

Today at Go/No-Go meeting it was decided to slip Fedora 20 Beta release by one week due to unresolved blocker bugs not being fixed by the time of meeting. Due to constrained schedule, shorter slip was considered but with limited QA resources availability, it was decided to slip for a full week. FESCo will be contacted for further schedule adjustments. Beta release is now planned for Nov-12. More details in meeting minutes [2]. The next Go/No-Go meeting is on Thursday, Nov 07, the same time in #fedora-meeting-2 channel. [1] http://qa.fedoraproject.org/blockerbugs/milestone/20/beta/buglist [2] http://meetbot.fedoraproject.org/fedora-meeting-2/2013-10-31/f20_beta_gon... [3] https://fedoraproject.org/wiki/Releases/20/Schedule _______________________________________________ test-announce mailing list test-announce(a)lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/test-announce

10 years, 5 months

1
0
0 / 0

Canonical copy of config.guess/config.sub

by Florian Weimer

What's the canonical system-wide copy of the config.guess file? I have: 9c01fa8c4554cb2c7b92c95dfa0dbfcf /usr/lib/rpm/redhat/config.guess 9c01fa8c4554cb2c7b92c95dfa0dbfcf /usr/share/libtool/config/config.guess c3178bdc1506f569388eaebec2026003 /usr/lib/rpm/config.guess d9375ba9d0b8cfd7bb6737e3fc43984f /usr/share/dejagnu/libexec/config.guess eea34cf893bb060ee20189e256a8065a /usr/share/automake-1.13/config.guess The situation with config.sub isn't much better: 0b96c40308f509ba2c0e132c1d2e70e7 /usr/lib/rpm/config.sub 1803a1d601bcf4debccfe2902c4f0f65 /usr/lib/rpm/redhat/config.sub 1803a1d601bcf4debccfe2902c4f0f65 /usr/share/libtool/config/config.sub 520911d86319be25a97f4be9ed7e0301 /usr/share/automake-1.13/config.sub I'm asking because I want to propose upstream that they put in a check if the system-wide version is newer, and if it is, just run it instead of the package-supplied copy. But in order to do that, we need a canonical path. Right now, iterating over /usr/share/automake*/config.{guess,sub} looks most promising and would work on Debian as well. -- Florian Weimer / Red Hat Product Security Team

10 years, 5 months

6
5
0 / 0

Announcing Fedora 19 ARM remix for Allwinner SOCs release 3

by Hans de Goede

Hi All, I'm very happy to announce the third release (r3) of my Fedora 19 ARM remix images for Allwinner A10, A10s, A13 and A20 based devices. This release is based on the official Fedora 19 Final for ARM images, with u-boot and kernel(s) from the linux-sunxi project: http://linux-sunxi.org/ New this release: 1) Fix the bad brown paper bag bug in r2 which caused it to not boot on sun4i (A10) and sun5i (A13/A10s) devices 2) Support for the cubietruck (except for the wifi module) 3) Support for the Megafeis A08 and Mini-X with A10s You can download it here: http://people.fedoraproject.org/~jwrdegoede/a10-images/Fedora-19-a10-armh... sha1sum: a57e5897e0c6047dbb473c438016d6364fd0709f It is important to read the README, the image standard comes without u-boot pre-loaded since u-boot is board specific. The image includes a user-friendly simple script to install the right u-boot for your board, but if you simply xzcat the image to an sdcard, and then boot your device with the sdcard, things will *not* work. See the README for a list of currently supported boards. Known Issues: -Many boards don't have an rtc (A10 and A20 have a builtin one), or at least no battery backup for it, resulting in the date + time being wrong. -If the date is of by more then a couple of months, "yum update" won't work because certificate validation fails for the https connection yum tries to make. So if yum fails to get its repodata first check (and fix) your date -The regular (host not otg) usb-port on A10s based boards can be a bit quirky. It is best to plug in a hub even when using only one device, otherwise the device may not be recognized. If this happens, after adding a hub, often a power-cycle is needed too. -The wifi chip on the Auxtek-T004 hdmi-stick and on the cubietruck are unsupported atm Enjoy, Hans And to make sure everyone reads the README, let me print it here in full: Fedora 19 ARM for Allwinner A10, A10s, A13 and A20 devices README ----------------------------------------------------------------- Quickstart guide ---------------- 1) Insert an sdcard, note any data on the card will be destroyed! 2) Make sure the card is not mounted, run "mount" and if the card shows up in the output umount its partitions 3) Write the img file to the card, ie as root do: xzcat Fedora-19-a10-armhfp-r2.img.xz > /dev/mmcblk0 sync 4) The card is not yet ready for use! Since the A10 u-boot is board specific, the image comes without any uboot install, follow the next steps to install the right u-boot for your board 5) Remove the card, and re-insert it. The uboot partition should get automatically mounted, if not mount it manually, 6) As root (or through sudo) run: <uboot-part-mount>/select-board.sh, ie: sudo /run/media/hans/uboot/select-board.sh If you've dialog installed the select-board.sh script will prompt for your board. If you don't have dialog installed, it will print the list of supported boards. Lookup your board and re-run the script with the shortname for your board as argument, ie: sudo sh /run/media/hans/uboot/select-board.sh mk802 7) umount the uboot and rootfs partitions, ie: umount /run/media/hans/uboot umount /run/media/hans/rootfs 8) Your sdcard is now ready for use 9) *Before* powering up your A10 device connect it to an hdmi or dvi monitor 10) When first booting from the sdcard inserted Fedora will automatically reboot once, this is part of the process to resize the root partition to fill the entire sdcard and is normal behavior. 11) After the automatic reboot Fedora will start with the initial-setup wizard: 11a) Configure networking, note: * If you've an A10 board with wired ethernet and you want to use dhcp you don't need to do anything. * If you've an A20 board, your ethernet may have a random mac-address, so if you want to configure a static ip-address and want it to stick across reboots, go to the ethernet-tab, select the mac-address field and delete its contents, so that the static ip address you're configuring does not get tied to the random mac-address. 11b) Setup the time zone 11c) Set a root password 11d) Create a user 12) Log in as the just created user 13) Enjoy Fedora on your A10 device Supported Devices: ------------------ Fedora 19 ARM for Allwinner A10 has been tested with the following devices: * A10s-OLinuXino-MICRO (Olimex) * A13-OLinuXino (Olimex) * A13-OLinuXino-MICRO (Olimex) * A20-OLinuXino-MICRO (Olimex) * Auxtek T003 hdmi tv stick * Auxtek T004 hdmi tv stick * BA10 TV Box * Cubieboard development board 1024 MB RAM * Cubieboard2 (A20) development board * Cubietruck development board * Gooseberry development board * Mele A1000G/A2000G 1024 MB RAM * Mini-X 1024 MB RAM * mk802 (with female mini hdmi) 512 MB RAM * mk802 with A10s (s with a circle around it on the barcode label) * mk802ii (with male normal hdmi) 1024 MB RAM * r7 hdmi tv stick * UHost U1A hdmi tv stick * Wobo i5 TV Box Fedora 19 ARM should also work on the following devices: * A10 tablet sold under various names (whitelabel) * A13 tablet sold under various names (whitelabel) * Coby MID7042 tablet * Coby MID8042 tablet * Coby MID9742 tablet * Cubieboard development board 512 MB RAM * DNS AirTab M82 tablet * EOMA68 A10 CPU card * H6 netbook * Hackberry development board * Hyundai a7hd tablet * iNet-97F Rev.2 (and clones) tablet * Marsboard A10 * Megafeis A08 * Mele A1000/A2000 512 MB RAM * Mele A3700 * Mini-X 512 MB RAM * Mini-X with A10s soc * mk802 (with female mini hdmi) 1024 MB RAM * pcDuino development board * Point of View ProTab 2 IPS 9" tablet * Point of View ProTab 2 IPS tablet with 3g * Sanei N90 * XZPAD700 7" tablet Configuring the display output ------------------------------ Multiple video outputs at the same time are not supported. By default hdmi output with EDID is used for all devices, except for tablets/netbooks where the default output is the lcd. The default hdmi output with EDID will get the native resolution of your TV / monitor and use that. Note that in order for this to work your TV / monitor must be connected *and turned on*, before booting your device. The output resolution can be configured with the disp.screen0_output_mode kernel cmdline value, which can be found in the extrargs part of uEnv.txt in the uboot partition. The default uEnv.txt contains the following value: disp.screen0_output_mode=EDID:1280x720p60 This means try to use EDID and if no valid EDID info is found fallback to 1280x720p60. The used output can be changed by adding disp.screen0_output_type=X to the extraargs in uEnv.txt. With X being one of: 0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga Some per display type notes: -lcd outputs: Hardcoded to the native mode, disp.screen0_output_mode is ignored -tv: For the cvbs output disp.screen0_output_mode must be set to one of the following: pal, pal-svideo, ntsc, ntsc-svideo, pal-m, pal-m-svideo, pal-nc, pal-nc-svideo. Note the -svideo variants should only be used on boards with an svideo connector, for composite out use the regular variants, ie: disp.screen0_output_type=2 disp.screen0_output_mode=pal -hdmi: To override the EDID detected mode, drop the "EDID:" from the disp.screen0_output_mode value and set it to the desired mode, ie: disp.screen0_output_type=3 disp.screen0_output_mode=1360x768p60 -vga: Does not support EDID, "EDID:" must be removed from the disp.screen0_output_mode value otherwise it will be ignored. interlaced progressive and refreshrate settings specified are ignored, each resolution has hardcoded values for these. Example usage: disp.screen0_output_type=4 disp.screen0_output_mode=1024x768 How to power your allwinner device ---------------------------------- For reliable operation it is important that your allwinner device is properly powered. Some users try to power their allwinner development boards through the power pin on the serial port / uart connector. This is a very bad idea! and will almost always result in unreliable operation. Instaed always power your allwinner device over the barrel connector intended for that using, using a quality, reliable power supply. USB controller caveats ---------------------- The OTG USB controller in host mode only supports a limited number of devices, plugging in a hub + mouse + keyboard typically will make either the mouse or keyboard not work. This is a hardware limitation which we will likely not be able to work around. On tv-sticks and top-set boxes, simply avoid the otg connector, instead use a hub in a regular host usb connector. Note on the mini-x the otg / host marking is not always correct. If things don't work try using the OTG connector instead! On tablets and the gooseberry unfortunately only the otg connector is available. One solution there is using a single usb-device which is both a keyboard and a mouse at the same time. IE the receiver for logitech wireless desktop sets. Known Issues ------------ * The broadcom sdio wifi found in the Auxtek T004 hdmi-stick and on the Cubietruck is not supported Supported hardware components / features: ----------------------------------------- Fedora 19 ARM for Allwinner A10 supports the following components: * CPU + PMU + RAM * Serial ports * MMC cards * Internal NAND storage * Framebuffer on lcd / vga / hdmi / composite video * Sound both analog out and over hdmi * OTG USB controller * Both standard USB host controllers * Wifi * Wired Ethernet * SATA * IR (untested at this time) * SPI (as module, not supported on A20) * "tablet" keys on olinuxino boards * 7 and 10 inch lcd displays on olinuxino boards (requires selecting the right config in select-board.sh Unsupported hardware components: -------------------------------- The following components require various proprietary blobs to be used, and as such are not supported in the Fedora images. The kernel drivers for them are present (usually as modules), so if you add the necessary blobs you might get these to work: * Mali 400 GPU * Cedar hardware video & audio decoding and encoding engine * G2D 2d engine Note that the drivers for these need some memory to be reserved at boot, and since they are not supported by default in the Fedora images, this memory reservation has been disabled. To reserve the memory edit /boot/uEnv.txt and remove the kernel cmdline options which disable the memory reservation. Differences from stock Fedora ----------------------------- * Since the A10 is not a very powerful soc some services which are enabled by default on Fedora are disabled in the image, see build-image.sh for a list. * No plymouth: we log to a serial console for debugging so no pretty splash. Also we don't use an initrd, so removing the console=ttyS0,115200 from the extraargs in uEnv.txt will give plymouth, but so late it hardly matters. Rebuilding the Fedora 19 ARM for Allwinner A10 disk image --------------------------------------------------------- Building the Fedora 19 ARM for Allwinner A10 disk image consists of 2 steps 1) Building a uboot.tar.gz and rootfs.tar.gz "overlays", this is done bu the build-boot-root-sh script 2) Combining uboot.tar.gz and rootfs.tar.gz with an official Fedora 19 arm img, this combining is done by the build-image.sh script The a10 image you downloaded is based on Fedora-XFCE-armhfp-19-1-sda.raw These scripts are hosted here: https://github.com/jwrdegoede/sunxi-fedora-scripts.git A copy of the exact versions of these scripts used to build this Fedora A10 image can be found in the scripts directory of the uboot partition, the kernel config used during the build can be found here too. If you want to exactly reproduce this image it is important to use the scripts from the scripts dir of the uboot partition, as the scripts contain GIT tags used during the build to checkout the exact versions to build. The pre-conditions these scripts expect to be met, and the exact usage of them is documented in comments in the top of each script.

10 years, 5 months

2
1
0 / 0

rawhide report: 20131031 changes

by Fedora compose checker

Compose started at Thu Oct 31 08:15:03 UTC 2013 Broken deps for i386 ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.i686 requires libImath.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIexMath.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIex.so.6 OpenEXR_CTL-1.0.1-16.fc20.i686 requires libHalf.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6 [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.i686 requires libatlas.so.3 [blueman] blueman-1.23-7.fc20.i686 requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.i686 requires gvfs-obexftp [cinnamon-control-center] cinnamon-control-center-2.0.5-1.fc21.i686 requires libupower-glib.so.1 [cinnamon-session] cinnamon-session-2.0.1-1.fc21.i686 requires libupower-glib.so.1 [cinnamon-settings-daemon] cinnamon-settings-daemon-2.0.5-1.fc21.i686 requires libupower-glib.so.1 cinnamon-settings-daemon-devel-2.0.5-1.fc21.i686 requires libupower-glib.so.1 [control-center] 1:control-center-3.10.1-1.fc21.i686 requires libupower-glib.so.1 [converseen] converseen-0.6.2-2.fc20.i686 requires libMagick++-6.Q16.so.1 [cp2k] cp2k-2.4-6.fc20.i686 requires libf77blas.so.3 cp2k-2.4-6.fc20.i686 requires libatlas.so.3 cp2k-mpich-2.4-6.fc20.i686 requires libf77blas.so.3 cp2k-openmpi-2.4-6.fc20.i686 requires libf77blas.so.3 [derelict] derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod [drawtiming] drawtiming-0.7.1-11.fc20.i686 requires libMagick++-6.Q16.so.1 [ekiga] ekiga-4.0.1-6.fc20.i686 requires libcamel-1.2.so.45 [evolution-mapi] evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45 [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.i686 requires libcamel-1.2.so.45 [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4 [freefem++] freefem++-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-3.19-3.1.fc18.i686 requires libatlas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-glx-3.19-3.1.fc18.i686 requires libatlas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libf77blas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libcblas.so.3 freefem++-mpi-3.19-3.1.fc18.i686 requires libatlas.so.3 [gnome-packagekit] gnome-packagekit-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-packagekit-installer-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-packagekit-updater-3.10.1-1.fc21.i686 requires libupower-glib.so.1 [gnome-power-manager] gnome-power-manager-3.10.1-1.fc21.i686 requires libupower-glib.so.1 [gnome-session] gnome-session-3.10.1-1.fc21.i686 requires libupower-glib.so.1 [gnome-settings-daemon] gnome-settings-daemon-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-settings-daemon-devel-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-settings-daemon-updates-3.10.1-1.fc21.i686 requires libupower-glib.so.1 [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60 [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [kawa] 1:kawa-1.11-5.fc19.i686 requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.i686 requires libMagick++-6.Q16.so.1 [kyua-cli] kyua-cli-0.5-3.fc19.i686 requires liblutok.so.0 kyua-cli-tests-0.5-3.fc19.i686 requires liblutok.so.0 [libghemical] libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3 libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3 [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.i686 requires libcamel-1.2.so.45 [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.i686 requires libopenobex.so.1 [mate-applets] mate-applets-1.6.1-5.fc20.i686 requires libupower-glib.so.1 [mate-power-manager] mate-power-manager-1.6.3-0.3.gitbc54d96.fc21.i686 requires libupower-glib.so.1 [mate-session-manager] mate-session-manager-1.6.1-4.fc21.i686 requires libupower-glib.so.1 [mpqc] mpqc-2.3.1-23.fc20.i686 requires libf77blas.so.3 mpqc-2.3.1-23.fc20.i686 requires libatlas.so.3 [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.i686 requires libvtksys.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkWidgets.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkVolumeRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkViews.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkTextAnalysis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkParallel.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkInfovis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkImaging.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkIO.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkHybrid.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGraphics.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGeovis.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGenericFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCommon.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCharts.so.5.10 nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmMSFF.so.2.2 nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmDICT.so.2.2 nifti2dicom-0.4.6-3.fc20.i686 requires libQVTK.so.5.10 [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.i686 requires libopenobex.so.1 [obexftp] obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1 perl-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 python-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 ruby-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1 [openbox] gdm-control-3.5.2-2.fc20.i686 requires gnome-panel gnome-panel-control-3.5.2-2.fc20.i686 requires gnome-panel [openlmi-providers] openlmi-powermanagement-0.4.0-2.fc21.i686 requires libupower-glib.so.1 [ovaldi] ovaldi-5.9.1-7.fc20.i686 requires libxalan-c.so.110 [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [perl-PDL-Graphics-PLplot] perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires perl(:MODULE_COMPAT_5.16.1) perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires libplplotd.so.11 [pion-net] pion-net-4.0.9-9.fc20.i686 requires liblog4cpp.so.4 [python-pandas] python-pandas-0.12.0-1.fc21.i686 requires python-bottleneck [python-tag] python-tag-2013.1-1.fc20.i686 requires libboost_python.so.1.53.0 [remmina] remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-rail.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-kbd.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-gdi.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-core.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-codec.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-channels.so.1.0 [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [subsurface] subsurface-3.1.1-2.fc20.i686 requires libosmgpsmap.so.2 [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 [tango] tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60 [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [tracker] tracker-0.16.2-4.fc21.i686 requires libupower-glib.so.1 Broken deps for x86_64 ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libImath.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIexMath.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit) OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libHalf.so.6()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit) OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit) [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.x86_64 requires libatlas.so.3()(64bit) [blueman] blueman-1.23-7.fc20.x86_64 requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.x86_64 requires gvfs-obexftp [cinnamon-control-center] cinnamon-control-center-2.0.5-1.fc21.i686 requires libupower-glib.so.1 cinnamon-control-center-2.0.5-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [cinnamon-session] cinnamon-session-2.0.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [cinnamon-settings-daemon] cinnamon-settings-daemon-2.0.5-1.fc21.i686 requires libupower-glib.so.1 cinnamon-settings-daemon-2.0.5-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) cinnamon-settings-daemon-devel-2.0.5-1.fc21.i686 requires libupower-glib.so.1 cinnamon-settings-daemon-devel-2.0.5-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [control-center] 1:control-center-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [converseen] converseen-0.6.2-2.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [cp2k] cp2k-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) cp2k-2.4-6.fc20.x86_64 requires libatlas.so.3()(64bit) cp2k-mpich-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) cp2k-openmpi-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit) [derelict] derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-3-20.20130626gite70c293.fc20.x86_64 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod derelict-tcod-devel-3-20.20130626gite70c293.fc20.x86_64 requires tcod [drawtiming] drawtiming-0.7.1-11.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [ekiga] ekiga-4.0.1-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [evolution-mapi] evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45 evolution-mapi-3.10.1-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit) [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4 1:fatrat-1.2.0-0.14.beta2.fc20.x86_64 requires liblog4cpp.so.4()(64bit) [freefem++] freefem++-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-glx-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit) freefem++-mpi-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit) [gnome-packagekit] gnome-packagekit-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) gnome-packagekit-installer-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) gnome-packagekit-updater-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [gnome-power-manager] gnome-power-manager-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [gnome-session] gnome-session-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [gnome-settings-daemon] gnome-settings-daemon-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-settings-daemon-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) gnome-settings-daemon-devel-3.10.1-1.fc21.i686 requires libupower-glib.so.1 gnome-settings-daemon-devel-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) gnome-settings-daemon-updates-3.10.1-1.fc21.x86_64 requires libupower-glib.so.1()(64bit) [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60 gtkd-2.0.0-29.20120815git9ae9181.fc18.x86_64 requires libphobos-ldc.so.60()(64bit) [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [kawa] 1:kawa-1.11-5.fc19.x86_64 requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit) [kyua-cli] kyua-cli-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit) kyua-cli-tests-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit) [libghemical] libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3 libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3 libghemical-2.99.1-24.fc20.x86_64 requires libf77blas.so.3()(64bit) libghemical-2.99.1-24.fc20.x86_64 requires libatlas.so.3()(64bit) [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.x86_64 requires libopenobex.so.1()(64bit) [mate-applets] mate-applets-1.6.1-5.fc20.x86_64 requires libupower-glib.so.1()(64bit) [mate-power-manager] mate-power-manager-1.6.3-0.3.gitbc54d96.fc21.x86_64 requires libupower-glib.so.1()(64bit) [mate-session-manager] mate-session-manager-1.6.1-4.fc21.x86_64 requires libupower-glib.so.1()(64bit) [mpqc] mpqc-2.3.1-23.fc20.x86_64 requires libf77blas.so.3()(64bit) mpqc-2.3.1-23.fc20.x86_64 requires libatlas.so.3()(64bit) [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtksys.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkWidgets.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkVolumeRendering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkViews.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkTextAnalysis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkRendering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkParallel.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkInfovis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkImaging.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkIO.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkHybrid.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGraphics.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGeovis.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGenericFiltering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkFiltering.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCommon.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCharts.so.5.10()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmMSFF.so.2.2()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmDICT.so.2.2()(64bit) nifti2dicom-0.4.6-3.fc20.x86_64 requires libQVTK.so.5.10()(64bit) [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.x86_64 requires libopenobex.so.1()(64bit) [obexftp] obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) perl-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) python-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) ruby-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit) [openbox] gdm-control-3.5.2-2.fc20.x86_64 requires gnome-panel gnome-panel-control-3.5.2-2.fc20.x86_64 requires gnome-panel [openlmi-providers] openlmi-powermanagement-0.4.0-2.fc21.x86_64 requires libupower-glib.so.1()(64bit) [ovaldi] ovaldi-5.9.1-7.fc20.x86_64 requires libxalan-c.so.110()(64bit) [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [perl-PDL-Graphics-PLplot] perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.1) perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires libplplotd.so.11()(64bit) [pion-net] pion-net-4.0.9-9.fc20.i686 requires liblog4cpp.so.4 pion-net-4.0.9-9.fc20.x86_64 requires liblog4cpp.so.4()(64bit) [python-pandas] python-pandas-0.12.0-1.fc21.x86_64 requires python-bottleneck [python-tag] python-tag-2013.1-1.fc20.x86_64 requires libboost_python.so.1.53.0()(64bit) [remmina] remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-rail.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-kbd.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-gdi.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-core.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-codec.so.1.0()(64bit) remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-channels.so.1.0()(64bit) [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [subsurface] subsurface-3.1.1-2.fc20.x86_64 requires libosmgpsmap.so.2()(64bit) [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit) 1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit) 1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit) [tango] tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60 tango-2-12.20120821git7b92443.fc19.x86_64 requires libphobos-ldc.so.60()(64bit) [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [tracker] tracker-0.16.2-4.fc21.i686 requires libupower-glib.so.1 tracker-0.16.2-4.fc21.x86_64 requires libupower-glib.so.1()(64bit) Broken deps for armhfp ---------------------------------------------------------- [OpenEXR_CTL] OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libImath.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIexMath.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIex.so.6 OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libHalf.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7 OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIex.so.6 [R-RScaLAPACK] R-RScaLAPACK-0.6.1-13.fc20.armv7hl requires libatlas.so.3 [avro] avro-mapred-1.7.5-1.fc21.noarch requires hadoop-mapreduce avro-mapred-1.7.5-1.fc21.noarch requires hadoop-client [blueman] blueman-1.23-7.fc20.armv7hl requires obex-data-server >= 0:0.4.3 blueman-1.23-7.fc20.armv7hl requires gvfs-obexftp [cinnamon-control-center] cinnamon-control-center-2.0.5-1.fc21.armv7hl requires libupower-glib.so.1 [cinnamon-session] cinnamon-session-2.0.1-1.fc21.armv7hl requires libupower-glib.so.1 [cinnamon-settings-daemon] cinnamon-settings-daemon-2.0.5-1.fc21.armv7hl requires libupower-glib.so.1 cinnamon-settings-daemon-devel-2.0.5-1.fc21.armv7hl requires libupower-glib.so.1 [cloud-init] cloud-init-0.7.2-4.fc20.noarch requires dmidecode [cobbler] cobbler-2.4.0-2.fc20.noarch requires syslinux [control-center] 1:control-center-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 [converseen] converseen-0.6.2-2.fc20.armv7hl requires libMagick++-6.Q16.so.1 [cp2k] cp2k-2.4-6.fc20.armv7hl requires libf77blas.so.3 cp2k-2.4-6.fc20.armv7hl requires libatlas.so.3 cp2k-mpich-2.4-6.fc20.armv7hl requires libf77blas.so.3 cp2k-openmpi-2.4-6.fc20.armv7hl requires libf77blas.so.3 [drawtiming] drawtiming-0.7.1-11.fc20.armv7hl requires libMagick++-6.Q16.so.1 [ekiga] ekiga-4.0.1-6.fc20.armv7hl requires libcamel-1.2.so.45 [evolution-mapi] evolution-mapi-3.10.1-1.fc21.armv7hl requires libcamel-1.2.so.45 [evolution-rss] 1:evolution-rss-0.3.94-1.fc21.armv7hl requires libcamel-1.2.so.45 [fatrat] 1:fatrat-1.2.0-0.14.beta2.fc20.armv7hl requires liblog4cpp.so.4 [fence-agents] fence-agents-common-4.0.3-1.fc21.armv7hl requires pexpect [gnome-do-plugins] gnome-do-plugins-thunderbird-0.8.4-14.fc20.armv7hl requires thunderbird [gnome-packagekit] gnome-packagekit-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 gnome-packagekit-installer-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 gnome-packagekit-updater-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 [gnome-power-manager] gnome-power-manager-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 [gnome-session] gnome-session-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 [gnome-settings-daemon] gnome-settings-daemon-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 gnome-settings-daemon-devel-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 gnome-settings-daemon-updates-3.10.1-1.fc21.armv7hl requires libupower-glib.so.1 [gradle] gradle-1.0-18.fc20.noarch requires plexus-container-default [gtkd] gtkd-geany-tags-2.0.0-29.20120815git9ae9181.fc18.noarch requires gtkd = 0:2.0.0-29.20120815git9ae9181.fc18 [httpdtap] httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo httpdtap-0.2-2.fc21.noarch requires apr-debuginfo [ipython] python-ipython-console-0.13.2-2.fc20.noarch requires pexpect python3-ipython-console-0.13.2-2.fc20.noarch requires python3-pexpect [kawa] 1:kawa-1.11-5.fc19.armv7hl requires servlet25 [koji] koji-vm-1.8.0-2.fc20.noarch requires python-virtinst [kxstitch] kxstitch-0.8.4.1-16.fc20.armv7hl requires libMagick++-6.Q16.so.1 [kyua-cli] kyua-cli-0.5-3.fc19.armv7hl requires liblutok.so.0 kyua-cli-tests-0.5-3.fc19.armv7hl requires liblutok.so.0 [libghemical] libghemical-2.99.1-24.fc20.armv7hl requires libf77blas.so.3 libghemical-2.99.1-24.fc20.armv7hl requires libatlas.so.3 [libopensync-plugin-evolution2] 1:libopensync-plugin-evolution2-0.22-37.fc20.armv7hl requires libcamel-1.2.so.45 [libopensync-plugin-irmc] 1:libopensync-plugin-irmc-0.22-7.fc20.armv7hl requires libopenobex.so.1 [mate-applets] mate-applets-1.6.1-5.fc20.armv7hl requires libupower-glib.so.1 [mate-power-manager] mate-power-manager-1.6.3-0.3.gitbc54d96.fc21.armv7hl requires libupower-glib.so.1 [mate-session-manager] mate-session-manager-1.6.1-4.fc21.armv7hl requires libupower-glib.so.1 [mozilla-firetray] mozilla-firetray-thunderbird-0.3.6-0.5.143svn.fc18.1.armv7hl requires thunderbird >= 0:11 [mpqc] mpqc-2.3.1-23.fc20.armv7hl requires libf77blas.so.3 mpqc-2.3.1-23.fc20.armv7hl requires libatlas.so.3 [msp430-libc] msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3 [netdisco] netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay) [nifti2dicom] nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtksys.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkWidgets.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkVolumeRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkViews.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkTextAnalysis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkRendering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkParallel.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkInfovis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkImaging.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkIO.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkHybrid.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGraphics.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGeovis.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGenericFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkFiltering.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCommon.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCharts.so.5.10 nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmMSFF.so.2.2 nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmDICT.so.2.2 nifti2dicom-0.4.6-3.fc20.armv7hl requires libQVTK.so.5.10 [nocpulse-common] nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI) [nodejs-mongodb] nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2 [obexfs] obexfs-0.12-7.fc20.armv7hl requires libopenobex.so.1 [obexftp] obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 obexftp-libs-0.23-15.fc20.armv7hl requires libopenobex.so.1 perl-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 python-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 ruby-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1 [openbox] gdm-control-3.5.2-2.fc20.armv7hl requires gnome-panel gnome-panel-control-3.5.2-2.fc20.armv7hl requires gnome-panel [openlmi-providers] openlmi-powermanagement-0.4.0-2.fc21.armv7hl requires libupower-glib.so.1 [ovaldi] ovaldi-5.9.1-7.fc20.armv7hl requires libxalan-c.so.110 [perl-Language-Expr] perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2) [pion-net] pion-net-4.0.9-9.fc20.armv7hl requires liblog4cpp.so.4 [pure] pure-doc-0.57-4.fc20.noarch requires pure = 0:0.57-4.fc20 [python-pandas] python-pandas-0.12.0-1.fc21.armv7hl requires python-bottleneck [python-tag] python-tag-2013.1-1.fc20.armv7hl requires libboost_python.so.1.53.0 [remmina] remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-rail.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-kbd.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-gdi.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-core.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-codec.so.1.0 remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-channels.so.1.0 [rootplot] rootplot-2.2.1-7.fc19.noarch requires root-python [rubygem-audited-activerecord] rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4 [scala] scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar [sigul] sigul-0.100-3.fc20.noarch requires pexpect [spacewalk-admin] spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert) [spring-installer] ca-installer-20090316-14.fc20.armv7hl requires spring spring-installer-20090316-14.fc20.armv7hl requires spring [spring-maps-default] spring-maps-default-0.1-11.fc20.noarch requires spring [springlobby] springlobby-0.169-5.fc20.armv7hl requires spring [stylus-toolbox] stylus-toolbox-0.2.7-6.fc20.noarch requires pexpect [subsurface] subsurface-3.1.1-2.fc20.armv7hl requires libosmgpsmap.so.2 [syncevolution] 1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1 1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45 1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1 1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45 [syntastic] syntastic-d-2.3.0-11.20120917git72856e6.fc20.noarch requires ldc [tango] tango-doc-2-12.20120821git7b92443.fc19.noarch requires tango-devel = 0:2-12.20120821git7b92443.fc19 tango-geany-tags-2-12.20120821git7b92443.fc19.noarch requires tango = 0:2-12.20120821git7b92443.fc19 [totpcgi] totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html [tracker] tracker-0.16.2-4.fc21.armv7hl requires libupower-glib.so.1 [yumex] yumex-3.0.13-1.fc21.noarch requires python-pexpect New package: RemoteBox-1.6-2.fc21 Open Source VirtualBox Client with Remote Management New package: fluid-0.1.90-2.20130723git6d6e0cd.fc21 Library for fluid and dynamic applications development with QtQuick New package: htrace-2.03-2.fc21 Tracing framework for java based distributed systems New package: oscap-anaconda-addon-0.2-1.fc21 Anaconda addon integrating OpenSCAP to the installation process New package: python-theano-0.6.0-0.1.rc3.fc21 Mathematical expressions involving multidimensional arrays Updated Packages: anaconda-21.4-1.fc21 -------------------- * Wed Oct 30 2013 Brian C. Lane <bcl(a)redhat.com> - 21.4-1 - Fix up a couple more pylint errors. (clumens) - Add check for Linux HFS+ ESP on Mac (#1010495) (bcl) - Update bootDrive info when storage config updated in text-mode. (#861018) (sbueno+anaconda) - Remove the special handling for en (dshea) - Ignore SIGINT (#1024822) (amulhern) - Don't show language twice for keyboard layouts (#1021907) (petersen) - Make Software spoke ready even if there is no repo (#1010348) (vpodzime) - Use decorator for methods that invalidate base repo cache (vpodzime) - Use cache for base repo if possible (vpodzime) - Make sure to actually set the autopart flag when needed. (#1023554) (dlehman) - Fix Gtk errors about list store columns (dshea) - Fix the layout up and down button sensitivies. (dshea) - Fix the Gkbd spec string for layouts with no variant (dshea) - pylint wants regexes with backslashes to be specified with 'r'. (clumens) - Add ack flag checking to makebumpver (bcl) - Correctly accept 'sshd' boot arg as alias for 'inst.sshd' (#924157) (wwoods) - Only eject CDROM devices we're actually using (#949919) (wwoods) - mem may not exist when it's printed out in these error messages. (clumens) Size change: 17460 bytes apbs-1.3-7.fc21 --------------- * Wed Oct 30 2013 Tim Fenn <tim.fenn(a)gmail.com> - 1.3-7 - rebuild for atlas 3.10.1 (consolidates lapack and blas) Size change: -959 bytes atk-2.11.1-1.fc21 ----------------- * Wed Oct 30 2013 Richard Hughes <rhughes(a)redhat.com> - 2.11.1-1 - Update to 2.11.1 Size change: 3867 bytes bind-9.9.4-5.fc21 ----------------- * Wed Oct 30 2013 Tomas Hozza <thozza(a)redhat.com> 32:9.9.4-5 - Create symlink /var/named/chroot/var/run -> /var/named/chroot/run - Added session-keyfile statement into default named.conf since we use /run/named Size change: 167 bytes bsh-1.3.0-28.fc21 ----------------- * Wed Oct 30 2013 Michal Srb <msrb(a)redhat.com> - 0:1.3.0-28 - Switch to jline1 (Resolves rhbz#1023018) Size change: -983 bytes carto-0.9.5-2.fc21 ------------------ * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.9.5-2 - Fix dependencies * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.9.5-1 - Update to 0.9.5 upstream release - Update to latest nodejs packaging standards - Enable tests Size change: 5898 bytes cheese-3.11.1-1.fc21 -------------------- * Wed Oct 30 2013 Richard Hughes <rhughes(a)redhat.com> - 2:3.11.1-1 - Update to 3.11.1 Size change: 1645 bytes cinepaint-1.4-1.fc21 -------------------- * Tue Oct 29 2013 Jaromir Capik <jcapik(a)redhat.com> - 1.4-1 - Trying to resurrect the project - Updating to 1.4 [ = 1.0-4 upstream ] - Patching the PNG plugin - Fixing the oy040 patch to apply cleanly - Removing python stuff from files due to build failures (removed upstream?) - Removing oyranos support - it's crashing :( - Fixing bogus dates in the changelog * Sat Sep 14 2013 Bruno Wolff III <bruno(a)wolff.to> - 1.3-11 - Rebuild for ilmbase related soname bumps * Sat Aug 03 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 1.3-10 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild Size change: -6457524 bytes cinnamon-screensaver-2.0.3-1.fc21 --------------------------------- * Wed Oct 30 2013 Leigh Scott <leigh123linux(a)googlemail.com> - 2.0.3-1 - update to 2.0.3 - add patch to fix suspend locking Size change: 1966 bytes colord-1.1.3-1.fc21 ------------------- * Wed Oct 30 2013 Richard Hughes <richard(a)hughsie.com> 1.1.3-1 - New upstream version - Never print incomplete 'colormgr dump' output - Restrict the length of key and values when setting metadata Size change: 7203 bytes ctstream-9-1.fc21 ----------------- * Thu Oct 31 2013 Petr Pisar <ppisar(a)redhat.com> - 9-1 - Version 9 bump Size change: -673 bytes cups-filters-1.0.41-1.fc21 -------------------------- * Wed Oct 30 2013 Jiri Popelka <jpopelka(a)redhat.com> - 1.0.41-1 - 1.0.41 - PPD-less printing support Size change: 10941 bytes dnf-0.4.6-1.fc21 ---------------- * Wed Oct 30 2013 Aleš Kozumplík <ales(a)redhat.com> - 0.4.6-1 - doc: add documentation for the installonly options. (Ales Kozumplik) - Add history-undo-specific transaction check error output. (Radek Holy) - Move transaction check error output into commands. (Radek Holy) - Enable the "history undo" command. (Radek Holy) - Fix TypeError raised when Base.history_undo called with a nonempty transaction (RhBug:878348) (Radek Holy) - Add iterators exhaustion testing function. (Radek Holy) - Generalize the PackageMatcher to an ObjectMatcher. (Radek Holy) - Support querying the last transaction ID in the history. (Radek Holy) - refactor: Extract transaction IDs/offsets conversion to a standalone method. (Radek Holy) - Create a YumHistory wrapper. (Radek Holy) - Add iterables splitting function. (Radek Holy) - Support skipping the depsolve stage. (Radek Holy) - store the expired repos. (Ales Kozumplik) - update the installonlies list. (Ales Kozumplik) - installonly packages: enable enforcing the limit (RhBug:880524) (Ales Kozumplik) - downloader: use LRO_FASTESTMIRRORCACHE (Zdenek Pavlas) - downloader: enable failfast (Zdenek Pavlas) - removed available_by_name function from dnf.queries (Jan Silhan) - removed available_by_nevra function from dnf.queries (Jan Silhan) - removed installed_by_nevra function from dnf.queries, added nevra Query method (Jan Silhan) - removed installed_by_name function from dnf.queries (Jan Silhan) - removed installed function from dnf.queries (Jan Silhan) - fixed GPG key retrieval error (Jan Silhan) - added to_ord function to pycomp.py (Jan Silhan) - refactor: Remove unused parameter from CliTransactionDisplay.scriptout. (Radek Holy) - Fix return of Reinstalled history state by TransactionItem.history_iterator. (Radek Holy) - Move the _history_get_transaction to the BaseCli. (Radek Holy) - cli: Output.history and Output.yumdb. (Ales Kozumplik) - cli: do not register command instances, register command classes. (Ales Kozumplik) - refactor: cli: command.getNames() is now command.aliases. (Ales Kozumplik) - cli: do not display 'Setting up ... Process'. (Ales Kozumplik) - fix: traceback in 'dnf group summary' (RhBug:1019957) (Ales Kozumplik) - commands: recognize one-word group commands (e.g. 'grouplist') (RhBug:1020101) (Ales Kozumplik) - tests: fix GroupOutputTest. (Ales Kozumplik) - fix: traceback 'dnf -v group list Group'. (Ales Kozumplik) - cli: add Command.canonical(). (Ales Kozumplik) - comps: adapt to the latest libcomps that correctly throws KeyError in dict[]. (Ales Kozumplik) - cli: cosmetic: remove two extra newlines before 'Dependencies resolved.' (Ales Kozumplik) - remove: use of weakref.proxy. (Ales Kozumplik) - remove extra member variable assignment in Base._goal2transaction(). (Ales Kozumplik) - tests: rename: FakeTerm->MockTerminal. (Ales Kozumplik) - tests: fixed broken test_installPkgs_notfound(). (Ales Kozumplik) - refactor: split Output and Base objects in CLI. (Ales Kozumplik) - full Python 3 support added (Jan Silhan) - expired repos are saved in json instead of shelve (Jan Silhan) - fixed shadowing of variable (Jan Silhan) - removed needless flush from output.py (Jan Silhan) - repo.metalink_data is gone (RhBug:1020934) (Zdenek Pavlas) - tests: rename MockYumBase to MockBase. (Ales Kozumplik) - refactor: Base.build_transaction() so we can unit test its core. (Ales Kozumplik) - tests: test some obsoletes. (Ales Kozumplik) - doc: missing newline breaking format. (Ales Kozumplik) Size change: 9202 bytes docker-io-0.7-0.12.dm.fc21 -------------------------- * Sat Oct 26 2013 Lokesh Mandvekar <lsm5(a)redhat.com> - 0.7-0.12.dm - dm branch - dockerinit -> docker-init Size change: -22097 bytes dracut-034-24.git20131030.fc21 ------------------------------ * Wed Oct 30 2013 Harald Hoyer <harald(a)redhat.com> 034-24.git20131030 - fixed booting with rd.iscsi.firmware and without root= - fips: include crct10dif_generic - fixed missing modules in hostonly, which have no modalias - moved dracut to /usr/sbin Size change: 3766 bytes dustmite-1-16.20130922git9abec53.fc21 ------------------------------------- * Wed Oct 30 2013 Jonathan MERCIER <bioinfornatics(a)gmail.com> - 1-16.20130922git9abec53 - rebuilt * Thu Oct 24 2013 Jonathan MERCIER <bioinfornatics(a)gmail.com> - 1-15.20130922git9abec53 - Update to rev 9abec53 * Sun Aug 04 2013 "Jonathan Mercier" <"Jonathan Mercier at gmail dot org"> - 1-14.20130725git135b7d5 - Update to rev 135b7d5 * Sat Aug 03 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 1-13.20130601git4b953aa - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild Size change: -380 bytes eog-3.11.1-1.fc21 ----------------- * Wed Oct 30 2013 Richard Hughes <rhughes(a)redhat.com> - 3.11.1-1 - Update to 3.11.1 Size change: 1580 bytes feclipse-maven-plugin-0.0.4-0.1.git684bc0.fc21 ---------------------------------------------- * Wed Oct 30 2013 Krzysztof Daniel <kdaniel(a)redhat.com> 0.0.4-0.1.git684bc0 - Update to tycho 0.19.0 API. Size change: -762 bytes firefox-25.0-3.fc21 ------------------- * Wed Oct 30 2013 Martin Stransky <stransky(a)redhat.com> - 25.0-3 - Update to 25.0 Build 3 Size change: -9980 bytes fts-monitoring-3.1.33-4.fc21 ---------------------------- * Wed Oct 30 2013 Michal Simon <michal.simon(a)cern.ch> - 3.1.33-4 - since it is a noarch package removing '' sufix * Mon Oct 28 2013 Alejandro Alvarez <aalvarez(a)cern.ch> - 3.1.33-3 - Added versioned dependency fts-monitoring * Tue Oct 08 2013 Alejandro Alvarez <aalvarez(a)cern.ch> - 3.1.33-2 - Added selinux rpm * Wed Aug 28 2013 Michal Simon <michal.simon(a)cern.ch> - 3.1.1-1 - replacing '--no-preserve=ownership' - python macros have been removed - comments regarding svn have been removed - '/builddir/build/BUILD/fts-monitoring-3.1.33/' prefix is not used anymore - more detailed description * Tue Apr 30 2013 Michal Simon <michal.simon(a)cern.ch> - 3.1.0-1 - First EPEL release Size change: 162 bytes gc-7.2d-4.fc21 -------------- * Wed Oct 30 2013 Pavel Raiskup <praiskup(a)redhat.com> - 7.2d-4 - add support for aarch64 (#969817) - ignore testsuite results only for powerpc Size change: 3027 bytes gdb-7.6.50.20130731-13.fc21 --------------------------- * Wed Oct 30 2013 Jan Kratochvil <jan.kratochvil(a)redhat.com> - 7.6.50.20130731-13.fc20 - [rhel5] Fix /etc/gdbinit compatibility with python-2.4. Size change: 164 bytes gedit-3.11.1-1.fc21 ------------------- * Wed Oct 30 2013 Richard Hughes <rhughes(a)redhat.com> - 2:3.11.1-1 - Update to 3.11.1 Size change: -33543 bytes gl3n-0.20131013-10.fc21 ----------------------- * Wed Oct 30 2013 Jonathan MERCIER <bioinfornatics(a)gmail.com> - 0.20131013-10 - rebuilt * Thu Oct 24 2013 Jonathan MERCIER <bioinfornatics(a)gmail.com> - 0.20131013-9 - Update to rev 9095b9a * Sun Aug 04 2013 "Jonathan Mercier" <"Jonathan Mercier at gmail dot org"> - 0.20130707-8 - Update to rev 9d5d3e4 * Sat Aug 03 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 0.20130626-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild Size change: -251 bytes gnome-mines-3.11.1-1.fc21 ------------------------- * Tue Oct 29 2013 Richard Hughes <rhughes(a)redhat.com> - 3.11.1-1 - Update to 3.11.1 Size change: -21719 bytes haskell-platform-2013.2.0.0-26.fc21 ----------------------------------- * Thu Oct 31 2013 Jens Petersen <petersen(a)redhat.com> - 2013.2.0.0-26 - fix alex patching for ppc and s390 archs Size change: 19 bytes kde-plasma-nm-0.9.3.1-6.fc21 ---------------------------- * Wed Oct 30 2013 Jan Grulich <jgrulich(a)redhat.com> - 0.9.3.1-6 - add some upstream fixes and changes Size change: 11508 bytes kid3-3.0.1-1.fc21 ----------------- * Tue Oct 29 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 3.0.1-1 - Update to 3.0.1. - Move translations to -common. Size change: -280 bytes ksh-20120801-12.fc21 -------------------- * Wed Oct 30 2013 Michal Hlavinka <mhlavink(a)redhat.com> - 20120801-12 - ksh stops on read when monitor mode is enabled Size change: -541 bytes kte-collaborative-0.2.0-1.fc21 ------------------------------ * Wed Oct 30 2013 Jan Grulich <jgrulich(a)redhat.com> 0.2.0-1 - kte-collaborative 0.2.0 Size change: 24461 bytes lhapdf-5.9.1-1.fc21 ------------------- * Tue Oct 29 2013 Mattias Ellert <mattias.ellert(a)fysast.uu.se> - 5.9.1-1 - Update to version 5.9.1 Size change: 2397 bytes libqinfinity-0.5.2-1.fc21 ------------------------- * Wed Oct 30 2013 Jan Grulich <jgrulich(a)redhat.com> - 1:0.5.2-1 - libqinfinity 0.5.2 Size change: 122 bytes libreswan-3.6-1.fc21 -------------------- * Thu Oct 31 2013 Paul Wouters <pwouters(a)redhat.com> - 3.6-1 - Updated to 3.6 (IKEv2, MODECFG, Cisco interop fixes) - Generate empty NSS db if none exists Size change: -220791 bytes lightdm-1.8.3-1.fc21 -------------------- * Wed Oct 30 2013 Rex Dieter <rdieter(a)fedoraproject.org> 1.8.3-1 - lightdm-1.8.3 Size change: 422 bytes liquibase-3.0.7-4.fc21 ---------------------- * Mon Oct 28 2013 Alex Wood <awood(a)redhat.com> - 3.0.7-4 - Update to 3.0.7. - Use jpackage-utils to generate launch script. - Split javadoc into separate package. Size change: 16 bytes lvm2-2.02.103-3.fc21 -------------------- * Wed Oct 30 2013 Peter Rajnoha <prajnoha(a)redhat.com> - 2.02.103-3 - Fix missing lvmetad scan for PVs found on MD partitions. - Respect DM_UDEV_DISABLE_OTHER_RULES_FLAG in lvmetad udev rules. Size change: 1032 bytes maven-hpi-plugin-1.100-1.fc21 ----------------------------- * Wed Oct 30 2013 Michal Srb <msrb(a)redhat.com> - 1.100-1 - Update to upstream version 1.100 Size change: 916 bytes mock-1.1.34-1.fc21 ------------------ * Tue Oct 29 2013 Clark Williams <williams(a)redhat.com> - 1.1.34-1 - fixed specfile to include mass rebuild changelog entry - package_state: drop privs when writing available_packages data [BZ# 916685] - unconditionally update default.cfg on install [BZ# 858822] - attempt to make mock more EL5 friendly [BZ# 949616] - do not ignore missing dependencies [BZ# 955478] - set the group defined in chrootgid [BZ# 953519] - add the --nocheck option to mock [BZ# 1015790] - raise privs before deleting rpm db files in chroot [BZ# 973617] - clean up orphan processes even if chroot not cleaned [BZ# 972868] - do not remove the chroot builddir if not cleaning the chroot [BZ# 483486] - use root object environment in package_state plugin [BZ# 921221] - Pass values of --plugin-option through literal_eval [BZ# 1018359] - add default mode to mount in tmpfs plugin [BZ# 598257] - exit mockbuild.util.logOutput() when child process dies [BZ# 885405] Size change: 2834 bytes mutter-3.11.1-1.fc21 -------------------- * Wed Oct 30 2013 Florian Müllner <fmuellner(a)redhat.com> - 3.11.1-1 - Update to 3.11.1 Size change: 331 bytes mutter-wayland-3.11.1-1.fc21 ---------------------------- * Wed Oct 30 2013 Florian Müllner <fmuellner(a)redhat.com> - 3.11.1-1 - Update to 3.11.1 Size change: -27030 bytes nodejs-mapnik-reference-5.0.7-1.fc21 ------------------------------------ * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 5.0.7-1 - Update to 5.0.7 upstream release Size change: 9660 bytes nodejs-millstone-0.6.8-1.fc21 ----------------------------- * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.6.8-1 - Update to 0.6.8 upstream release Size change: -2594 bytes nodejs-sqlite3-2.1.18-1.fc21 ---------------------------- * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 2.1.18-1 - Update to 2.1.18 upstream release Size change: 386 bytes nodejs-srs-0.3.6-2.fc21 ----------------------- * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.3.6-2 - Rebuild with correct source archive * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.3.6-1 - Update to 0.3.6 upstream release Size change: 743047 bytes nodejs-zipfile-0.4.2-1.fc21 --------------------------- * Wed Oct 30 2013 Tom Hughes <tom(a)compton.nu> - 0.4.2-1 - Update to 0.4.2 upstream release Size change: -255 bytes numpy-1.8.0-1.fc21 ------------------ * Wed Oct 30 2013 Orion Poplawski <orion(a)nwra.com> - 1:1.8.0-1 - Update to 1.8.0 final Size change: 886 bytes openldap-2.4.37-1.fc21 ---------------------- * Wed Oct 30 2013 Jan Synáček <jsynacek(a)redhat.com> - 2.4.37-1 - new upstream release (#1023916) - fix: missing a linefeed at the end of file /etc/openldap/ldap.conf (#1019836) Size change: 6877 bytes orthanc-0.7.1-1.fc21 -------------------- * Wed Oct 30 2013 Sebastien Jodogne <s.jodogne(a)gmail.com> 0.7.1-1 - New upstream version - Fix for big endian architectures (bug #985748) - Packaging of the Orthanc Client library Size change: 105653 bytes perl-DateTime-Format-DBI-0.041-1.fc21 ------------------------------------- * Thu Oct 31 2013 Petr Šabata <contyk(a)redhat.com> - 0.041-1 - 0.041 bump Size change: -603 bytes perl-Perl-Critic-Deprecated-1.119-1.fc21 ---------------------------------------- * Thu Oct 31 2013 Petr Pisar <ppisar(a)redhat.com> - 1.119-1 - 1.119 bump Size change: 9034 bytes perl-Perl-Critic-More-1.003-1.fc21 ---------------------------------- * Thu Oct 31 2013 Petr Pisar <ppisar(a)redhat.com> - 1.003-1 - 1.003 bump Size change: 139 bytes phonon-4.6.0-9.fc21 ------------------- * Wed Oct 30 2013 Rex Dieter <rdieter(a)fedoraproject.org> - 4.6.0-9 - pull in upstream fixes - PhononConfig.cmake: fix/workaround regression'y cmake behavior Size change: 14363 bytes pulseaudio-4.0-8.gitf81e3.fc21 ------------------------------ * Wed Oct 30 2013 Rex Dieter <rdieter(a)fedoraproject.org> - 4.0-8.gitf81e3 - fix PACKAGE_VERSION Size change: 205 bytes python-blivet-0.26-1.fc21 ------------------------- * Wed Oct 30 2013 Brian C. Lane <bcl(a)redhat.com> - 0.26-1 - Add macefi format type (#1010495) (bcl) - Allow hfs+ boot devices to have their name set (#1010495) (bcl) - Update parted partitions on hidden disks when copying a Blivet. (#1023556) (dlehman) - Add ack flag checking to makebumpver (bcl) - Add makebumpver script (bcl) Size change: 4410 bytes python-offtrac-0.1.0-1.fc21 --------------------------- * Wed Oct 30 2013 Ralph Bean <rbean(a)redhat.com> - 0.1.0-1 - Python3 support Size change: -668 bytes python3-3.3.2-7.fc21 -------------------- * Wed Oct 30 2013 Bohuslav Kabrda <bkabrda(a)redhat.com> - 3.3.2-7 - Bytecompile all *.py files properly during build (rhbz#1023607) Size change: 1850 bytes resource-agents-3.9.5-10.fc21 ----------------------------- * Sun Oct 20 2013 David Vossel <dvossel(a)redhat.com> - 3.9.5-10 - Fix build system for rawhide. * Wed Oct 16 2013 David Vossel <dvossel(a)redhat.com> - 3.9.5-9 - Remove rgmanager agents from build. Size change: -305 bytes rubygem-thread_safe-0.1.3-1.fc21 -------------------------------- * Wed Oct 30 2013 Josef Stribny <jstribny(a)redhat.com> - 0.1.3-1 - Update to thread_safe 0.1.3 Size change: -876 bytes rubygem-uglifier-2.3.0-1.fc21 ----------------------------- * Wed Oct 30 2013 Josef Stribny <jstribny(a)redhat.com> - 2.3.0-1 - Update to uglifier 2.3.0 Size change: 1066 bytes spacefm-0.9.0-1.fc21 -------------------- * Thu Oct 31 2013 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 0.9.0-1 - 0.9.0 Size change: 75555 bytes spice-0.12.4-3.fc21 ------------------- * Wed Oct 30 2013 Christophe Fergeau <cfergeau(a)redhat.com> 0.12.4-3 - Add patch fixing CVE-2013-4282 Size change: 1507 bytes sssd-1.11.2-1.fc21 ------------------ * Wed Oct 30 2013 Jakub Hrozek <jhrozek(a)redhat.com> - 1.11.2-1 - New upstream release 1.11.2 - Remove upstreamed patches - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.11.2 Size change: 18865 bytes telepathy-mission-control-5.16.0-2.fc21 --------------------------------------- * Wed Oct 30 2013 Rex Dieter <rdieter(a)fedoraproject.org> - 1:5.16.0-2 - --disable-upower * Thu Oct 03 2013 Brian Pepple <bpepple(a)fedoraproject.org> - 1:5.16.0-1 - Update to 5.16.0. Size change: 8333 bytes thunderbird-24.1.0-1.fc21 ------------------------- * Wed Oct 30 2013 Jan Horak <jhorak(a)redhat.com> - 24.1.0-1 - Update to 24.1.0 Size change: -23863 bytes uuid-1.6.2-24.fc21 ------------------ * Wed Oct 30 2013 Michal Hlavinka <mhlavink(a)redhat.com> - 1.6.2-24 - drop uuid-pgsql subpackage, it is outdated and does not work, use uuid-ossp module from postgresql-contrib instead Size change: 179 bytes valgrind-3.9.0-0.1.TEST1.fc21 ----------------------------- * Mon Oct 28 2013 Mark Wielaard <mjw(a)redhat.com> - 3.9.0-0.1.TEST1 - Upgrade to valgrind 3.9.0.TEST1 - Remove patches that are now upstream: - valgrind-3.8.1-abbrev-parsing.patch - valgrind-3.8.1-af-bluetooth.patch - valgrind-3.8.1-aspacemgr_VG_N_SEGs.patch - valgrind-3.8.1-avx2-bmi-fma.patch.gz - valgrind-3.8.1-avx2-prereq.patch - valgrind-3.8.1-bmi-conf-check.patch - valgrind-3.8.1-capget.patch - valgrind-3.8.1-cfi_dw_ops.patch - valgrind-3.8.1-dwarf-anon-enum.patch - valgrind-3.8.1-filter_gdb.patch - valgrind-3.8.1-find-buildid.patch - valgrind-3.8.1-gdbserver_exit.patch - valgrind-3.8.1-gdbserver_tests-syscall-template-source.patch - valgrind-3.8.1-glibc-2.17-18.patch - valgrind-3.8.1-index-supp.patch - valgrind-3.8.1-initial-power-isa-207.patch - valgrind-3.8.1-manpages.patch - valgrind-3.8.1-memcheck-mc_translate-Iop_8HLto16.patch - valgrind-3.8.1-mmxext.patch - valgrind-3.8.1-movntdqa.patch - valgrind-3.8.1-new-manpages.patch - valgrind-3.8.1-openat.patch - valgrind-3.8.1-overlap_memcpy_filter.patch - valgrind-3.8.1-pie.patch - valgrind-3.8.1-pkg-config.patch - valgrind-3.8.1-power-isa-205-deprecation.patch - valgrind-3.8.1-ppc-32-mode-64-bit-instr.patch - valgrind-3.8.1-ppc-setxattr.patch - valgrind-3.8.1-proc-auxv.patch - valgrind-3.8.1-ptrace-include-configure.patch - valgrind-3.8.1-ptrace-setgetregset.patch - valgrind-3.8.1-ptrace-thread-area.patch - valgrind-3.8.1-regtest-fixlets.patch - valgrind-3.8.1-s390-STFLE.patch - valgrind-3.8.1-s390_tsearch_supp.patch - valgrind-3.8.1-sendmsg-flags.patch - valgrind-3.8.1-sigill_diag.patch - valgrind-3.8.1-static-variables.patch - valgrind-3.8.1-stpncpy.patch - valgrind-3.8.1-text-segment.patch - valgrind-3.8.1-wcs.patch - valgrind-3.8.1-x86_amd64_features-avx.patch - valgrind-3.8.1-xaddb.patch - valgrind-3.8.1-zero-size-sections.patch - Remove special case valgrind-3.8.1-enable-armv5.patch. - Remove valgrind-3.8.1-x86-backtrace.patch, rely on new upstream fp/cfi try-cache mechanism. Size change: 1547019 bytes vdsm-4.12.1-5.fc21 ------------------ * Wed Oct 30 2013 Cole Robinson <crobinso(a)redhat.com> - 4.12.1-5 - Fix broken hostname dep on rawhide Size change: 136 bytes wildfly-8.0.0-0.13.Beta1.fc21 ----------------------------- * Wed Oct 30 2013 Marek Goldmann <mgoldman(a)redhat.com> - 8.0.0-0.13.Beta1 - Removed jline BR, RHBZ#1023006 Size change: 96 bytes xfce4-systemload-plugin-1.1.1-5.fc21 ------------------------------------ * Wed Oct 30 2013 Kevin Fenzi <kevin(a)scrye.com> 1.1.1-5 - Rebuild for new upower Size change: -1017 bytes xfce4-weather-plugin-0.8.3-3.fc21 --------------------------------- * Wed Oct 30 2013 Kevin Fenzi <kevin(a)scrye.com> 0.8.3-3 - Rebuild for new upower Size change: -1013 bytes xmp-4.0.6-1.fc21 ---------------- * Wed Oct 30 2013 Dominik Mierzejewski <rpm(a)greysector.net> - 4.0.6-1 - update to 4.0.6 Size change: 179 bytes xmp-plugin-audacious-4.0.0-0.3.e0213c0.fc21 ------------------------------------------- * Wed Oct 30 2013 Dominik Mierzejewski <rpm(a)greysector.net> - 4.0.0-0.3.e0213c0 - updated to e0213c0 - dropped obsolete condition Size change: -719 bytes xulrunner-25.0-2.fc21 --------------------- * Wed Oct 30 2013 Martin Stransky <stransky(a)redhat.com> - 25.0-2 - Update to 25.0 Build 3 Size change: -9263 bytes youtube-dl-2013.10.30-1.fc21 ---------------------------- * Thu Oct 31 2013 Christopher Meng <rpm(a)cicku.me> - 2013.10.30-1 - Update to new release(BZ#1024948). Size change: 2099 bytes yum-3.4.3-112.fc21 ------------------ * Wed Oct 30 2013 James Antill <james at fedoraproject.org> - 3.4.3-112 - Update to latest HEAD. - Actually run the groups update config. when not in objects mode. BZ 1002439. - Implement pkg.remote_url for YumLocalPackage. BZ 1016148. - UpdateNotice.xml(): sanitize pkg['epoch']. BZ 1020540. - yum-cron: support download/install with update_messages==False. BZ 1018068. - Fix some bugs in setopt for repo config. entries. BZ 1023595. - Add loop limit for depsolving. BZ 1017840. - Add yum-makecache systemd service, force network updates on for better UI. Size change: 2053 bytes Summary: Added Packages: 5 Removed Packages: 0 Modified Packages: 75 Size of added packages: 4425773 (4.2 M) Size change of modified packages: -4173986 (-4.0 M) Size of removed packages: 0 (0 ) Size change: 251787 (246 k) Compose finisheded at Thu Oct 31 14:34:10 UTC 2013

10 years, 5 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

devel October 2013