hdf5 1.8.18 update in rawhide
by Orion Poplawski
I'm building hdf5 1.8.18 for rawhide now. I'll be rebuilding all dependent
packages afterwards.
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA, Boulder/CoRA Office FAX: 303-415-9702
3380 Mitchell Lane orion(a)nwra.com
Boulder, CO 80301 http://www.nwra.com
7 years, 4 months
failure of f24 to f25 upgrade
by Howard Howell
Hi, everyone,
I have been trying to upgrade my system from f24 to f25 using
the cli in the terminal.
814 dnf system-upgrade download --releasever=25
815 dnf system-upgrade download --releasever=25 --allowerasing
816 dnf system-upgrade download --releasever=25 --allowerasing --
nogpgcheck
all run from superuser.
error:
Running transaction check
Transaction check succeeded.
Running transaction test
The downloaded packages were saved in cache until the next successful
transaction.
You can remove cached packages by executing 'dnf clean packages'.
Error: Transaction check error:
file /usr/bin from install of google-earth-stable-6.0.3.2197-0.x86_64
conflicts with file from package filesystem-3.2-37.fc24.x86_64
# dnf --system-upgrade reboot
will not run due to same error.
I have obtained the google key and installed it using pgp install, but
no change. Here are some of the other things I have tried:
dnf distrosync
dnf help
dnf upgrade google_Earth
dnf upgrade google-earth
dnf system-upgrade --nogpgcheck reboot
dnf erase googleearth
The erase google earth I have tried also with the full name
dnf erase google-earth-stable-6.0.3.2197-0.x86_64
No match for argument: google-earth-stable-6.0.3.2197-0.x86_64
Error: No packages marked for removal.
Given that I cannot erase the offending package, I tried:
dnf system-upgrade reboot --allowerasing
Error: system is not ready for upgrade
Yet again with nogpgcheck
dnf system-upgrade reboot --nogpgcheck
Error: system is not ready for upgrade
A straight reboot will bring the system back to f24. But no upgrade.
A bugzilla check was no less frustrating with no help for the issue.
Any ideas out there?
Regards,
Les H
7 years, 4 months
dnf skipping updates in koji
by Orion Poplawski
I just noticed this in a root.log for a koji rawhide build that didn't
error out doing the install:
DEBUG util.py:421: Skipping packages with conflicts:
DEBUG util.py:421: (add '--best --allowerasing' to command line to
force their upgrade):
DEBUG util.py:421: acl x86_64 2.2.52-11.fc24
build 75 k
DEBUG util.py:421: bash-completion noarch 1:2.4-1.fc26
build 268 k
DEBUG util.py:421: compat-openssl10 x86_64
1:1.0.2j-5.fc26 build 1.1 M
DEBUG util.py:421: cracklib-dicts x86_64 2.9.6-3.fc25
build 3.9 M
DEBUG util.py:421: dbus x86_64
1:1.11.6-1.fc26 build 245 k
DEBUG util.py:421: dbus-libs x86_64
1:1.11.6-1.fc26 build 172 k
DEBUG util.py:421: deltarpm x86_64 3.6-17.fc25
build 88 k
DEBUG util.py:421: dnf-conf noarch
2.0.0-0.rc1.4.fc26 build 41 k
DEBUG util.py:421: dnf-plugins-core noarch
1.0.0-0.rc1.1.fc26 build 38 k
....
This doesn't seem right to me.
https://koji.fedoraproject.org/koji/taskinfo?taskID=16531079
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA/CoRA Division FAX: 303-415-9702
3380 Mitchell Lane orion(a)cora.nwra.com
Boulder, CO 80301 http://www.cora.nwra.com
7 years, 4 months
VTK 7.1 w/MPI coming to rawhide
by Orion Poplawski
I'm building VTK 7.1 for rawhide now. Other big change is MPI support. I'll
build the dependent packages tomorrow after it completes (about 20 hours).
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA, Boulder/CoRA Office FAX: 303-415-9702
3380 Mitchell Lane orion(a)nwra.com
Boulder, CO 80301 http://www.nwra.com
7 years, 4 months
Fedora rawhide compose report: 20161205.n.0 changes
by Fedora compose checker
OLD: Fedora-Rawhide-20161204.n.0
NEW: Fedora-Rawhide-20161205.n.0
===== SUMMARY =====
Added images: 0
Dropped images: 1
Added packages: 0
Dropped packages: 0
Upgraded packages: 39
Downgraded packages: 0
Size of added packages: 0.00 B
Size of dropped packages: 0.00 B
Size of upgraded packages: 890.59 MiB
Size of downgraded packages: 0.00 B
Size change of upgraded packages: 2.28 MiB
Size change of downgraded packages: 0.00 B
===== ADDED IMAGES =====
===== DROPPED IMAGES =====
Image: Minimal raw-xz armhfp
Path: Spins/armhfp/images/Fedora-Minimal-armhfp-Rawhide-20161204.n.0-sda.raw.xz
===== ADDED PACKAGES =====
===== DROPPED PACKAGES =====
===== UPGRADED PACKAGES =====
Package: DevIL-1.7.8-24.fc26
Old package: DevIL-1.7.8-23.fc24
Summary: A cross-platform image library
RPMs: DevIL DevIL-ILUT DevIL-ILUT-devel DevIL-devel
Size: 2176656 bytes
Size change: 23272 bytes
Changelog:
* Sun Dec 04 2016 Hans de Goede <hdegoede(a)redhat.com> - 1.7.8-24
- Rebuild for new jasper
Package: OpenSceneGraph-3.4.0-5.fc26
Old package: OpenSceneGraph-3.4.0-4.fc24
Summary: High performance real-time graphics toolkit
RPMs: OpenSceneGraph OpenSceneGraph-devel OpenSceneGraph-examples OpenSceneGraph-examples-SDL OpenSceneGraph-examples-fltk OpenSceneGraph-examples-gtk OpenSceneGraph-examples-qt OpenSceneGraph-gdal OpenSceneGraph-gstreamer OpenSceneGraph-libs OpenSceneGraph-qt OpenSceneGraph-qt-devel OpenThreads OpenThreads-devel
Size: 65418196 bytes
Size change: -1009748 bytes
Changelog:
* Sun Dec 04 2016 Ralf Cors��pius <corsepiu(a)fedoraproject.org> - 3.4.0-5
- Rebuild for jasper-2.0.0.
Package: SLOF-0.1.git20161019-1.fc26
Old package: SLOF-0.1.git20160223-1.fc25
Summary: Slimline Open Firmware
RPMs: SLOF
Size: 489130 bytes
Size change: -6776 bytes
Changelog:
* Sun Dec 04 2016 Cole Robinson <crobinso(a)redhat.com> 0.1.git20161019-1
- Update to SLOF 20161019 for qemu 2.8
Package: cpuid-20161201-1.fc26
Old package: cpuid-20161114-2.fc26
Summary: Dumps information about the CPU(s)
RPMs: cpuid
Size: 191188 bytes
Size change: 1632 bytes
Changelog:
* Sun Dec 04 2016 Fabian Affolter <mail(a)fabian-affolter.ch> - 20161201-1
- Update to new upstream version 20161201 (rhbz#1400731)
Package: dnf-2.0.0-0.rc2.3.fc26
Old package: dnf-2.0.0-0.rc2.2.fc26
Summary: Package manager forked from Yum, using libsolv as a dependency resolver
RPMs: dnf dnf-automatic dnf-conf dnf-yum python2-dnf python3-dnf
Size: 1174004 bytes
Size change: 144 bytes
Changelog:
* Sun Dec 04 2016 Igor Gnatenko <i.gnatenko.brain(a)gmail.com> - 2.0.0-0.rc2.3
- Restore patch for relaxing strict groups
Package: environment-modules-3.2.10-18.fc26
Old package: environment-modules-3.2.10-17.fc24
Summary: Provides dynamic modification of a user's environment
RPMs: environment-modules
Size: 710992 bytes
Size change: 2084 bytes
Changelog:
* Sun Dec 04 2016 Orion Poplawski <orion(a)cora.nwra.com> - 3.2.10-18
- Fix compilation with -Werror=implicit-function-declaration
- Use %license
Package: gegl-0.2.0-31.fc26
Old package: gegl-0.2.0-29.fc25
Summary: A graph based image processing framework
RPMs: gegl gegl-devel gegl-operations-workshop
Size: 6145952 bytes
Size change: -9188 bytes
Changelog:
* Sat Dec 03 2016 Julian Sikorski <belegdol(a)fedoraproject.org> - 0.2.0-30
- Fixed building with libopenraw-0.1
- Added rubygems to BuildRequires to fix build error
- Modernised the .spec file a bit
- Disabled silent build
* Sun Dec 04 2016 Josef Ridky <jridky(a)redhat.com> - 0.2.0-31
- rebuild for jasper library
Package: gmsh-2.15.0-1.fc26
Old package: gmsh-2.14.1-1.fc26
Summary: A three-dimensional finite element mesh generator
RPMs: gmsh gmsh-common gmsh-devel gmsh-doc gmsh-libs gmsh-mpich gmsh-mpich-devel gmsh-mpich-libs gmsh-openmpi gmsh-openmpi-devel gmsh-openmpi-libs
Size: 85521624 bytes
Size change: -51368 bytes
Changelog:
* Sun Dec 04 2016 Sandro Mani <manisandro(a)gmail.com> - 2.15.0-1
- Update to 2.15.0
Package: grads-2.0.2-18.fc26
Old package: grads-2.0.2-17.fc25
Summary: Tool for easy acces, manipulation, and visualization of data
RPMs: grads
Size: 58709960 bytes
Size change: 57376 bytes
Changelog:
* Sun Dec 04 2016 Orion Poplawski <orion(a)cora.nwra.com> - 2.0.2-18
- Rebuild for jasper 2.0
* Sun Dec 04 2016 Orion Poplawski <orion(a)cora.nwra.com> - 2.0.2-18
- Add patch to compile with -Werror=implicit-function-declaration
- Update URL and Source URL
Package: ipxe-20161108-1.gitb991c67.fc26
Old package: ipxe-20160622-1.git0418631.fc26
Summary: A network boot loader
RPMs: ipxe-bootimgs ipxe-roms ipxe-roms-qemu
Size: 9568462 bytes
Size change: 34656 bytes
Changelog:
* Sun Dec 04 2016 Cole Robinson <crobinso(a)redhat.com> - 20161108-1.gitb991c67
- Rebase to version shipped with qemu 2.8
Package: libicns-0.8.1-10.fc26
Old package: libicns-0.8.1-8.fc24
Summary: Library for manipulating Macintosh icns files
RPMs: libicns libicns-devel libicns-utils
Size: 573972 bytes
Size change: -11988 bytes
Changelog:
* Sat Dec 03 2016 Andrea Musuruane <musuruan(a)gmail.com> - 0.8.1-9
- Rebuilt for jasper 2.0
- Dropped obsolete Group, Buildroot, %clean and %defattr
- Dropped cleaning at the beginning of %install
- Correctly marked license files
* Sun Dec 04 2016 Andrea Musuruane <musuruan(a)gmail.com> - 0.8.1-10
- Fix compiling with gcc6
Package: lis-1.7.14-1.fc26
Old package: lis-1.7.13-2.fc26
Summary: A library for solving linear equations and eigenvalue problems
RPMs: lis lis-bin lis-devel lis-doc
Size: 3705486 bytes
Size change: 12296 bytes
Changelog:
* Sun Dec 04 2016 Filipe Rosset <rosset.filipe(a)gmail.com> - 1.7.14-1
- Rebuilt for new upstream release 1.7.14, fixes rhbz #1051419
- Fix .gitignore file and remove old useless sources
Package: lxterminal-0.2.0-7.D20161202git6da8eae6.fc26
Old package: lxterminal-0.2.0-6.D20160809git80291921.fc26
Summary: Desktop-independent VTE-based terminal emulator
RPMs: lxterminal
Size: 785704 bytes
Size change: -8312 bytes
Changelog:
* Sun Dec 04 2016 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 0.2.0-7.D20161202git6da8eae6
- Update to the latest git
Package: mariadb-3:10.1.19-6.fc26
Old package: mariadb-3:10.1.19-4.fc26
Summary: A community developed branch of MySQL
RPMs: mariadb mariadb-bench mariadb-common mariadb-config mariadb-connect-engine mariadb-devel mariadb-embedded mariadb-embedded-devel mariadb-errmsg mariadb-libs mariadb-server mariadb-server-galera mariadb-test
Size: 321568888 bytes
Size change: 873720 bytes
Changelog:
* Wed Nov 30 2016 Michal Schorm <mschorm(a)redhat.com> - 3:10.1.19-5
- Testsuite blacklists heavily updated. Current tracker: #1399847
- Log-error option added to all config files examples
Resolves: #1382988
* Thu Dec 01 2016 Rex Dieter <rdieter(a)fedoraproject.org> - 3:10.1.19-6
- -devel: use pkgconfig(openssl) to allow any implementation (like compat-openssl10)
* Fri Dec 02 2016 Michal Schorm <mschorm(a)redhat.com> - 3:10.1.19-6
- Move patch from specfile to standalone patch file
Related: #1382988
Package: mate-menu-16.10.1-3.fc26
Old package: mate-menu-16.10.1-2.fc26
Summary: Advanced Menu for the MATE Desktop
RPMs: mate-menu
Size: 280898 bytes
Size change: 296 bytes
Changelog:
* Sun Dec 04 2016 Wolfgang Ulbrich <chat-to-me(a)raveit.de> - 16.10.1-3
- remove depedency to beesu to avoid spam in maintainers mailbox
Package: mavibot-1.0.0-0.4.M8.fc26
Old package: mavibot-1.0.0-0.3.M8.fc26
Summary: ApacheDS MVCC BTree implementation
RPMs: mavibot mavibot-javadoc
Size: 409340 bytes
Size change: 1088 bytes
Changelog:
* Sun Dec 04 2016 gil cattaneo <puntogil(a)libero.it> 1.0.0-0.4.M8
- remove test failure
Package: mintmenu-5.6.5-5.fc26
Old package: mintmenu-5.6.5-4.fc24
Summary: Advanced Menu for the MATE Desktop
RPMs: mintmenu
Size: 315538 bytes
Size change: 108 bytes
Changelog:
* Sun Dec 04 2016 Wolfgang Ulbrich <chat-to-me(a)raveit.de> - 5.6.5-5
- remove depedency to beesu to avoid spam in maintainers mailbox
Package: munin-2.0.28-1.fc26
Old package: munin-2.0.27-1.fc26
Summary: Network-wide graphing framework (grapher/gatherer)
RPMs: munin munin-async munin-cgi munin-common munin-java-plugins munin-netip-plugins munin-nginx munin-node munin-ruby-plugins
Size: 963034 bytes
Size change: 2028 bytes
Changelog:
* Mon Dec 05 2016 "D. Johnson" <fenris02(a)fedoraproject.org> - 2.0.28-1
- Upstream released 2.0.28
Package: mup-6.5-1.fc26
Old package: mup-6.4.1-2.fc24
Summary: A music notation program that can also generate MIDI files
RPMs: mup
Size: 8805704 bytes
Size change: -565752 bytes
Changelog:
* Sun Dec 04 2016 Greg Bailey <gbailey(a)lxpro.com> - 6.5-1
- Update to 6.5
- Additional useaccs values: nonermuser and nonnatrmuser
- Abilty to force printing clef or time signature, even if they didn't change
- Transposition can be limited to just notes or just chords
- Grace notes allowed to have any non-dotted time value
- Barstyle options of all and between
- New subbarstyle parameter
- newscore can include scoresep
- Improved note spacing
- Alignment markers can be included in rom, bold, ital, boldital, and center
- Alternate double whole symbol
- gridsatend can be set in staff context
Package: ncl-6.3.0-10.fc26
Old package: ncl-6.3.0-9.fc26
Summary: NCAR Command Language and NCAR Graphics
RPMs: ncl ncl-common ncl-devel ncl-examples
Size: 133267912 bytes
Size change: 808272 bytes
Changelog:
* Sun Dec 04 2016 Orion Poplawski <orion(a)cora.nwra.com> - 6.3.0-10
- Rebuild for jasper 2.0
Package: netcdf-fortran-4.4.4-3.fc26
Old package: netcdf-fortran-4.4.4-2.fc26
Summary: Fortran libraries for NetCDF-4
RPMs: netcdf-fortran netcdf-fortran-devel netcdf-fortran-mpich netcdf-fortran-mpich-devel netcdf-fortran-mpich-static netcdf-fortran-openmpi netcdf-fortran-openmpi-devel netcdf-fortran-openmpi-static netcdf-fortran-static
Size: 7096466 bytes
Size change: 28796 bytes
Changelog:
* Sun Dec 04 2016 Orion Poplawski <orion(a)cora.nwra.com> - 4.4.4-3
- Add patch to compile with -Werror=implicit-function-declaration
Package: ocl-icd-2.2.10-1.fc26
Old package: ocl-icd-2.2.9-3.fc26
Summary: OpenCL ICD Bindings
RPMs: ocl-icd ocl-icd-devel
Size: 365028 bytes
Size change: 3112 bytes
Changelog:
* Sun Dec 04 2016 Igor Gnatenko <i.gnatenko.brain(a)gmail.com> - 2.2.10-1
- Update to 2.2.10
Package: openbios-1:20161123-1.gitef8a14e.fc26
Old package: openbios-1:20160717-1.gite79bca6.fc26
Summary: OpenBIOS implementation of IEEE 1275-1994
RPMs: openbios
Size: 270250 bytes
Size change: 2776 bytes
Changelog:
* Sun Dec 04 2016 Cole Robinson <crobinso(a)redhat.com> - 20161123-1.gitef8a14e
- Update to ef8a14e for qemu 2.8
Package: openhft-affinity-3.0.6-5.fc26
Old package: openhft-affinity-3.0.6-4.fc26
Summary: Java Thread Affinity library
RPMs: openhft-affinity openhft-affinity-javadoc openhft-affinity-test
Size: 537424 bytes
Size change: 1100 bytes
Changelog:
* Sun Dec 04 2016 gil cattaneo <puntogil(a)libero.it> 3.0.6-5
- remove test failure
Package: pari-2.9.1-1.fc26
Old package: pari-2.9.0-1.fc26
Summary: Number Theory-oriented Computer Algebra System
RPMs: pari pari-devel pari-gp
Size: 39246632 bytes
Size change: 1404 bytes
Changelog:
* Sun Dec 04 2016 Paul Howarth <paul(a)city-fan.org> - 2.9.1-1
- Update to 2.9.1 (see CHANGES for details)
Package: pcsxr-1.9.94-7.fc26
Old package: pcsxr-1.9.94-6.fc26
Summary: A plugin based PlayStation (PSX) emulator with high compatibility
RPMs: pcsxr
Size: 4490236 bytes
Size change: 12520 bytes
Changelog:
* Sun Dec 04 2016 Jeremy Newton <alexjnewt AT hotmail DOT com> - 1.9.94-7
- Added patch for missing include
Package: perl-Text-Table-1.132-1.fc26
Old package: perl-Text-Table-1.131-1.fc26
Summary: Organize Data in Tables
RPMs: perl-Text-Table
Size: 39022 bytes
Size change: 1488 bytes
Changelog:
* Sun Dec 04 2016 Emmanuel Seyman <emmanuel(a)seyman.fr> - 1.132-1
- Update to 1.132
Package: purple-hangouts-1:0-41.20161128hg4c2de0f.fc26
Old package: purple-hangouts-1:0-40.20161122hgb80a0e1.fc26
Summary: Hangouts plugin for libpurple
RPMs: pidgin-hangouts purple-hangouts
Size: 1233958 bytes
Size change: -2528 bytes
Changelog:
* Sun Dec 04 2016 Vitaly Zaitsev <vitaly(a)easycoding.org> - 1:0-41.20161128hg4c2de0f
- Updated to latest snapshot.
Package: python-empy-3.3.2-10.fc26
Old package: python-empy-3.3.2-9.fc26
Summary: A powerful and robust template system for Python
RPMs: python2-empy python3-empy
Added RPMs: python2-empy
Dropped RPMs: python-empy
Size: 219116 bytes
Size change: 508 bytes
Changelog:
* Sun Dec 04 2016 Filipe Rosset <rosset.filipe(a)gmail.com> - 3.3.2-10
- rebuilt to fix rhbz #1388272 (use latest python packaging guidelines)
Package: python-idna-2.1-2.fc26
Old package: python-idna-2.1-1.fc26
Summary: Internationalized Domain Names in Applications (IDNA)
RPMs: python2-idna python3-idna
Added RPMs: python2-idna
Dropped RPMs: python-idna
Size: 172296 bytes
Size change: 656 bytes
Changelog:
* Mon Nov 28 2016 Orion Poplawski <orion(a)cora.nwra.com> - 2.1-2
- Ship python2-idna
- Enable python3 for EPEL
- Modernize spec
Package: python-pkgconfig-1.2.2-1.fc26
Old package: python-pkgconfig-1.1.0-6.fc25
Summary: A Python interface to the pkg-config command line tool
RPMs: python2-pkgconfig python3-pkgconfig
Size: 32328 bytes
Size change: 2304 bytes
Changelog:
* Wed Oct 12 2016 Orion Poplawski <orion(a)cora.nwra.com> - 1.1.0-7
- Fix build for EPEL
* Sun Dec 04 2016 Igor Gnatenko <i.gnatenko.brain(a)gmail.com> - 1.2.2-1
- Update to 1.2.2
Package: python-pyvo-0.4.1-2.20161020git823b14a.fc26
Old package: python-pyvo-0.4.1-1.20161020git823b14a.fc26
Summary: Access to remote data and services of the Virtual observatory (VO) using Python
RPMs: python2-pyvo python3-pyvo python3-pyvo-doc
Added RPMs: python3-pyvo-doc
Size: 2330430 bytes
Size change: 368254 bytes
Changelog:
* Sun Dec 04 2016 Christian Dersch <lupinix(a)mailbox.org> - 0.4.1-2.20161020git823b14a
- Added -doc subpackage
- Added missing requirement for requests
Package: qt5-qtwebengine-5.7.1-3.fc26
Old package: qt5-qtwebengine-5.7.0-9.fc26
Summary: Qt5 - QtWebEngine components
RPMs: qt5-qtwebengine qt5-qtwebengine-devel qt5-qtwebengine-doc qt5-qtwebengine-examples
Size: 133057142 bytes
Size change: 1885396 bytes
Changelog:
* Sun Dec 04 2016 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 5.7.1-2
- clean_qtwebengine.sh: Rip out openh264 sources
- Rebase no-neon patch, add new arm-fpu-fix patch where no-neon not wanted
- Try enabling arm_neon unconditionally, #1282495 should be fixed even in F23
- Remove Android depenencies from openmax_dl ARM NEON detection (detect.c)
- Set CFLAGS, unset both CFLAGS and CXXFLAGS between qmake and make
- chromium-skia: build SkUtilsArm.cpp also on non-Android ARM
- webrtc: backport CPU feature detection for ARM Linux, enable it for Chromium
* Sun Dec 04 2016 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 5.7.1-3
- Ship the license files
Package: rhythmbox-3.4.1-2.fc26
Old package: rhythmbox-3.4.1-1.fc26
Summary: Music Management Application
RPMs: rhythmbox rhythmbox-devel rhythmbox-lirc
Size: 37250136 bytes
Size change: -78836 bytes
Changelog:
* Sun Dec 04 2016 David King <amigadave(a)amigadave.com> - 3.4.1-2
- Bump for libtdb update
Package: seabios-1.10.1-1.fc26
Old package: seabios-1.9.3-1.fc26
Summary: Open-source legacy BIOS implementation
RPMs: seabios seabios-bin seavgabios-bin
Size: 214982 bytes
Size change: 4684 bytes
Changelog:
* Sun Dec 04 2016 Cole Robinson <crobinso(a)redhat.com> - 1.10.1-1
- Rebased to version 1.10.1
Package: vdr-epg-daemon-1.1.64-1.fc26
Old package: vdr-epg-daemon-1.1.63-1.fc26
Summary: A daemon to download EPG data from internet and manage it in a mysql database
RPMs: vdr-epg-daemon
Size: 4501872 bytes
Size change: 596 bytes
Changelog:
* Sun Dec 04 2016 Martin Gansser <martinkg(a)fedoraproject.org> - 1.1.64-1
- Update to 1.1.64
Package: xkeyboard-config-2.19-2.fc26
Old package: xkeyboard-config-2.19-1.fc26
Summary: X Keyboard Extension configuration data
RPMs: xkeyboard-config xkeyboard-config-devel
Size: 824952 bytes
Size change: 660 bytes
Changelog:
* Mon Dec 05 2016 Peter Hutterer <peter.hutterer(a)redhat.com> 2.19-2
- Bump to keep F25 upgrade path happy, no changes.
Package: xosview-1.19-1.fc26
Old package: xosview-1.17-3.fc24
Summary: An X Window System utility for monitoring system resources
RPMs: xosview
Size: 797628 bytes
Size change: 4232 bytes
Changelog:
* Sun Dec 04 2016 Filipe Rosset <rosset.filipe(a)gmail.com> - 1.19-1
- Rebuilt for new upstream release 1.19, fixes rhbz #1401149
- Do not use upstreamed patches (already in latest release)
Package: xwax-1.6-1.fc26
Old package: xwax-1.5-6.fc24
Summary: Open source vinyl emulation software for Linux
RPMs: xwax
Size: 387708 bytes
Size change: -3004 bytes
Changelog:
* Sun Dec 04 2016 Filipe Rosset <rosset.filipe(a)gmail.com> - 1.6-1
- Rebuilt for new upstream version 1.6, fixes rhbz #1370846
===== DOWNGRADED PACKAGES =====
Broken deps for aarch64
----------------------------------------------------------
[Agda-stdlib]
Agda-stdlib-0.9-3.fc24.aarch64 requires ghc(base-4.7.0.2-970431ea147d4e1032b8fd9294993780)
Agda-stdlib-0.9-3.fc24.aarch64 requires ghc-devel(base-4.7.0.2-970431ea147d4e1032b8fd9294993780)
Agda-stdlib-0.9-3.fc24.aarch64 requires libHSbase-4.7.0.2-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.aarch64 requires libHSghc-prim-0.3.1.0-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.aarch64 requires libHSinteger-gmp-0.5.1.0-ghc7.8.4.so()(64bit)
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.aarch64 requires libmpi.so.12()(64bit)(openmpi-aarch64)
Ray-openmpi-2.3.1-12.fc24.aarch64 requires libmpi_cxx.so.1()(64bit)(openmpi-aarch64)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.aarch64 requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.aarch64 requires libtonezone.so.2.0()(64bit)
[ayttm]
ayttm-0.6.3-14.fc24.aarch64 requires libjasper.so.1()(64bit)
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[caja-extensions]
caja-beesu-1.16.0-1.fc26.aarch64 requires beesu
[calibre]
calibre-2.73.0-1.fc26.aarch64 requires qt5-qtbase(aarch-64) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.aarch64 requires libpoppler.so.64()(64bit)
[cantor]
cantor-libs-16.08.2-1.fc26.aarch64 requires libqalculate.so.5()(64bit)
[dcraw]
dcraw-9.27.0-1.fc25.aarch64 requires libjasper.so.1()(64bit)
[digikam]
digikam-5.3.0-3.fc26.aarch64 requires libjasper.so.1()(64bit)
digikam-libs-5.3.0-3.fc26.aarch64 requires libjasper.so.1()(64bit)
[dmlite]
dmlite-plugins-memcache-0.8.0-1.fc26.aarch64 requires libprotobuf.so.9()(64bit)
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.aarch64 requires libprotobuf.so.9()(64bit)
[dpm-dsi]
dpm-dsi-1.9.9-1.fc26.aarch64 requires globus-gridftp-server-progs(aarch-64) = 0:11.3
[espresso]
espresso-openmpi-3.3.0-8.fc24.aarch64 requires libmpi.so.12()(64bit)(openmpi-aarch64)
espresso-openmpi-3.3.0-8.fc24.aarch64 requires libmpi_cxx.so.1()(64bit)(openmpi-aarch64)
[floppy-support]
floppy-support-1.0.0-11.fc24.noarch requires kmod(floppy.ko)
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.aarch64 requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.aarch64 requires libgsoap++.so.9()(64bit)
fts-libs-3.4.3-5.fc26.aarch64 requires libgsoap++.so.9()(64bit)
fts-python-3.4.3-5.fc26.aarch64 requires libgsoap++.so.9()(64bit)
fts-server-3.4.3-5.fc26.aarch64 requires libgsoap++.so.9()(64bit)
[gammaray]
gammaray-qt5-2.6.0-1.fc26.aarch64 requires qt5-qtbase(aarch-64) = 0:5.7.0
[gegl03]
gegl03-0.3.8-3.fc26.aarch64 requires libjasper.so.1()(64bit)
[getdp]
getdp-2.10.0-2.fc26.aarch64 requires libGmsh.so.2.14()(64bit)
[gimp]
2:gimp-2.8.18-2.fc26.aarch64 requires libjasper.so.1()(64bit)
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[golang-github-mistifyio-go-zfs]
golang-github-mistifyio-go-zfs-devel-0-0.3.git1b4ae6f.fc25.noarch requires zfs-fuse
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
[grib_api]
grib_api-1.19.0-1.fc26.aarch64 requires libjasper.so.1()(64bit)
python2-grib_api-1.19.0-1.fc26.aarch64 requires libjasper.so.1()(64bit)
[gyachi]
gyachi-1.2.11-14.fc24.aarch64 requires libjasper.so.1()(64bit)
[kdelibs]
6:kdelibs-4.14.24-1.fc26.aarch64 requires libjasper.so.1()(64bit)
[kdelibs3]
kdelibs3-3.5.10-77.fc26.aarch64 requires libjasper.so.1()(64bit)
[kopete]
kopete-16.08.1-3.fc26.aarch64 requires libjasper.so.1()(64bit)
kopete-libs-16.08.1-3.fc26.aarch64 requires libjasper.so.1()(64bit)
[krecipes]
krecipes-2.1.0-1.fc24.aarch64 requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.aarch64 requires libpodofo.so.0.9.1()(64bit)
[kst]
kst-getdata-2.0.8-11.fc26.aarch64 requires libgetdata++.so.6()(64bit)
kst-getdata-2.0.8-11.fc26.aarch64 requires libgetdata.so.7()(64bit)
[lemonpos]
lemonpos-0.9.4-14.fc24.aarch64 requires qt-mysql
[luckybackup]
luckybackup-0.4.8-8.fc24.aarch64 requires beesu
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[olpc-netutils]
olpc-netutils-0.8.2-7.fc24.noarch requires olpc-utils >= 0:1.3.1
[openchange]
openchange-2.3-13.fc25.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
openchange-2.3-13.fc25.aarch64 requires libldb.so.1(LDB_0.9.15)(64bit)
openchange-client-2.3-13.fc25.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
[paraview]
paraview-5.2.0-1.fc26.aarch64 requires libprotobuf.so.9()(64bit)
paraview-mpich-5.2.0-1.fc26.aarch64 requires libprotobuf.so.9()(64bit)
paraview-openmpi-5.2.0-1.fc26.aarch64 requires libprotobuf.so.9()(64bit)
[perl-Alien-ROOT]
perl-Alien-ROOT-5.34.36.1-2.fc26.noarch requires root-core
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.aarch64 requires libperl.so.5.22()(64bit)
perl-Data-Alias-1.20-2.fc24.aarch64 requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.aarch64 requires libzmq.so.1()(64bit)
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.aarch64 requires libzmq.so.3()(64bit)
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.aarch64 requires libzmq.so.1()(64bit)
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.aarch64 requires php(api) = 0:20131106-64
php-magickwand-1.0.9.2-9.fc24.aarch64 requires php(zend-abi) = 0:20131226-64
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.aarch64 requires php(api) = 0:20131106-64
php-pecl-cairo-0.3.2-11.fc25.aarch64 requires php(zend-abi) = 0:20131226-64
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.aarch64 requires php(api) = 0:20151012-64
php-pecl-event-2.1.0-1.fc25.aarch64 requires php(zend-abi) = 0:20151012-64
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.aarch64 requires php(api) = 0:20131106-64
php-pecl-parsekit-1.3.0-10.fc25.aarch64 requires php(zend-abi) = 0:20131226-64
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.aarch64 requires php(api) = 0:20131106-64
php-pecl-runkit-1.0.4-3.fc25.aarch64 requires php(zend-abi) = 0:20131226-64
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.aarch64 requires php(api) = 0:20131106-64
php-pecl-sphinx-1.3.2-6.fc24.aarch64 requires php(zend-abi) = 0:20131226-64
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.aarch64 requires libqalculate.so.5()(64bit)
[plplot]
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.aarch64 requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.aarch64 requires libgnutls.so.28()(64bit)
postal-0.70-15.fc23.aarch64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[pulseaudio]
pulseaudio-9.0-1.fc25.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
[pygrib]
pygrib-2.0.2-2.fc26.aarch64 requires libjasper.so.1()(64bit)
python3-pygrib-2.0.2-2.fc26.aarch64 requires libjasper.so.1()(64bit)
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-moss]
python2-moss-0.3.4-7.fc26.noarch requires python-statsmodels
python2-moss-0.3.4-7.fc26.noarch requires python2-nipy
python3-moss-0.3.4-7.fc26.noarch requires python3-nipy
python3-moss-0.3.4-7.fc26.noarch requires python3-statsmodels
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.aarch64 requires libqalculate.so.5()(64bit)
[qt4pas]
qt4pas-2.5-9.fc25.aarch64 requires fpc-src
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.aarch64 requires libhunspell-1.3.so.0()(64bit)
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(kgio)
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.aarch64 requires php(api) = 0:20131106-64
php-redland-1.0.16.1-16.fc25.aarch64 requires php(zend-abi) = 0:20131226-64
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.aarch64 requires libpolyclipping.so.18()(64bit)
[rootplot]
rootplot-2.2.1-12.fc23.aarch64 requires root-python
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.10)(64bit)
2:ctdb-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:ctdb-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:ctdb-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:ctdb-tests-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-tests-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.23)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_1.1.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_1.1.19)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:samba-common-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-libs-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-python-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-python-4.5.1-1.fc26.aarch64 requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_1.1.14)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_1.1.25)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_1.1.27)(64bit)
2:samba-test-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-test-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.12)(64bit)
2:samba-test-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.19)(64bit)
2:samba-test-libs-4.5.1-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.24)(64bit)
2:samba-winbind-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-winbind-4.5.1-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.2)(64bit)
[sslogger]
sslogger-0.96-13.fc22.aarch64 requires libgnutls.so.28()(64bit)
sslogger-0.96-13.fc22.aarch64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
sslogger-slogd-0.96-13.fc22.aarch64 requires libgnutls.so.28()(64bit)
sslogger-slogd-0.96-13.fc22.aarch64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[sssd]
python2-sss-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
python3-sss-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-ad-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-common-pac-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-pac-1.14.2-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-dbus-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-dbus-1.14.2-1.fc26.aarch64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-ipa-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-tools-1.14.2-1.fc26.aarch64 requires libldb.so.1(LDB_0.9.10)(64bit)
[step]
step-16.08.2-1.fc26.aarch64 requires libqalculate.so.5()(64bit)
[syck]
syck-php-0.70-7.20130402.fc24.aarch64 requires php(api) = 0:20131106-64
syck-php-0.70-7.20130402.fc24.aarch64 requires php(zend-abi) = 0:20131226-64
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.aarch64 requires qt-mysql
[vim-syntastic]
vim-syntastic-d-3.8.0-3.fc26.noarch requires ldc
vim-syntastic-lisp-3.8.0-3.fc26.noarch requires clisp
[wgrib2]
wgrib2-2.0.3-2.fc24.aarch64 requires libjasper.so.1()(64bit)
[zoneminder]
zoneminder-1.28.1-6.fc25.aarch64 requires php-mysql
Broken deps for armhfp
----------------------------------------------------------
[OmegaT]
OmegaT-2.6.3-2.fc22.armv7hl requires hunspell <= 0:1.4.0
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.armv7hl requires libmpi.so.12(openmpi-arm)
Ray-openmpi-2.3.1-12.fc24.armv7hl requires libmpi_cxx.so.1(openmpi-arm)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.armv7hl requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.armv7hl requires libtonezone.so.2.0
[ayttm]
ayttm-0.6.3-14.fc24.armv7hl requires libjasper.so.1
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[caja-extensions]
caja-beesu-1.16.0-1.fc26.armv7hl requires beesu
[calibre]
calibre-2.73.0-1.fc26.armv7hl requires qt5-qtbase(armv7hl-32) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.armv7hl requires libpoppler.so.64
[cantor]
cantor-libs-16.08.2-1.fc26.armv7hl requires libqalculate.so.5
[cryptobone]
cryptobone-1.1.0-2.fc26.armv7hl requires beesu
[dcraw]
dcraw-9.27.0-1.fc25.armv7hl requires libjasper.so.1
[digikam]
digikam-5.3.0-3.fc26.armv7hl requires libjasper.so.1
digikam-libs-5.3.0-3.fc26.armv7hl requires libjasper.so.1
[dmlite]
dmlite-plugins-memcache-0.8.0-1.fc26.armv7hl requires libprotobuf.so.9
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.armv7hl requires libprotobuf.so.9
[dpm-dsi]
dpm-dsi-1.9.9-1.fc26.armv7hl requires globus-gridftp-server-progs(armv7hl-32) = 0:11.3
[espresso]
espresso-openmpi-3.3.0-8.fc24.armv7hl requires libmpi.so.12(openmpi-arm)
espresso-openmpi-3.3.0-8.fc24.armv7hl requires libmpi_cxx.so.1(openmpi-arm)
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.armv7hl requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.armv7hl requires libgsoap++.so.9
fts-libs-3.4.3-5.fc26.armv7hl requires libgsoap++.so.9
fts-python-3.4.3-5.fc26.armv7hl requires libgsoap++.so.9
fts-server-3.4.3-5.fc26.armv7hl requires libgsoap++.so.9
[gammaray]
gammaray-qt5-2.6.0-1.fc26.armv7hl requires qt5-qtbase(armv7hl-32) = 0:5.7.0
[gegl03]
gegl03-0.3.8-3.fc26.armv7hl requires libjasper.so.1
[getdp]
getdp-2.10.0-2.fc26.armv7hl requires libGmsh.so.2.14
[gimp]
2:gimp-2.8.18-2.fc26.armv7hl requires libjasper.so.1
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[golang-github-gonum-matrix]
golang-github-gonum-matrix-devel-0-0.5.gitfb13962.fc25.noarch requires golang(github.com/gonum/lapack/lapack64)
[golang-github-kubernetes-heapster]
golang-github-kubernetes-heapster-devel-0.16.1-4.fc25.noarch requires golang(github.com/google/cadvisor/client)
golang-github-kubernetes-heapster-devel-0.16.1-4.fc25.noarch requires golang(github.com/google/cadvisor/info/v1)
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
[grib_api]
grib_api-1.19.0-1.fc26.armv7hl requires libjasper.so.1
python2-grib_api-1.19.0-1.fc26.armv7hl requires libjasper.so.1
[gyachi]
gyachi-1.2.11-14.fc24.armv7hl requires libjasper.so.1
[kdelibs]
6:kdelibs-4.14.24-1.fc26.armv7hl requires libjasper.so.1
[kdelibs3]
kdelibs3-3.5.10-77.fc26.armv7hl requires libjasper.so.1
[kopete]
kopete-16.08.1-3.fc26.armv7hl requires libjasper.so.1
kopete-libs-16.08.1-3.fc26.armv7hl requires libjasper.so.1
[krecipes]
krecipes-2.1.0-1.fc24.armv7hl requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.armv7hl requires libpodofo.so.0.9.1
[lemonpos]
lemonpos-0.9.4-14.fc24.armv7hl requires qt-mysql
[luckybackup]
luckybackup-0.4.8-8.fc24.armv7hl requires beesu
[minetest]
minetest-0.4.14-2.fc26.armv7hl requires libjsoncpp.so.1
minetest-server-0.4.14-2.fc26.armv7hl requires libjsoncpp.so.1
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[openchange]
openchange-2.3-13.fc25.armv7hl requires libldb.so.1(LDB_0.9.10)
openchange-2.3-13.fc25.armv7hl requires libldb.so.1(LDB_0.9.15)
openchange-client-2.3-13.fc25.armv7hl requires libldb.so.1(LDB_0.9.10)
[paraview]
paraview-5.2.0-1.fc26.armv7hl requires libprotobuf.so.9
paraview-mpich-5.2.0-1.fc26.armv7hl requires libprotobuf.so.9
paraview-openmpi-5.2.0-1.fc26.armv7hl requires libprotobuf.so.9
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.armv7hl requires libperl.so.5.22
perl-Data-Alias-1.20-2.fc24.armv7hl requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.armv7hl requires libzmq.so.1
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.armv7hl requires libzmq.so.3
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.armv7hl requires libzmq.so.1
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.armv7hl requires php(api) = 0:20131106-32
php-magickwand-1.0.9.2-9.fc24.armv7hl requires php(zend-abi) = 0:20131226-32
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.armv7hl requires php(api) = 0:20131106-32
php-pecl-cairo-0.3.2-11.fc25.armv7hl requires php(zend-abi) = 0:20131226-32
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.armv7hl requires php(api) = 0:20151012-32
php-pecl-event-2.1.0-1.fc25.armv7hl requires php(zend-abi) = 0:20151012-32
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.armv7hl requires php(api) = 0:20131106-32
php-pecl-parsekit-1.3.0-10.fc25.armv7hl requires php(zend-abi) = 0:20131226-32
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.armv7hl requires php(api) = 0:20131106-32
php-pecl-runkit-1.0.4-3.fc25.armv7hl requires php(zend-abi) = 0:20131226-32
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.armv7hl requires php(api) = 0:20131106-32
php-pecl-sphinx-1.3.2-6.fc24.armv7hl requires php(zend-abi) = 0:20131226-32
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.armv7hl requires libqalculate.so.5
[plplot]
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.armv7hl requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.armv7hl requires libgnutls.so.28
postal-0.70-15.fc23.armv7hl requires libgnutls.so.28(GNUTLS_1_4)
[pulseaudio]
pulseaudio-9.0-1.fc25.armv7hl requires libtdb.so.1(TDB_1.2.1)
[pygrib]
pygrib-2.0.2-2.fc26.armv7hl requires libjasper.so.1
python3-pygrib-2.0.2-2.fc26.armv7hl requires libjasper.so.1
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.armv7hl requires libqalculate.so.5
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.armv7hl requires libhunspell-1.3.so.0
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.armv7hl requires php(api) = 0:20131106-32
php-redland-1.0.16.1-16.fc25.armv7hl requires php(zend-abi) = 0:20131226-32
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.armv7hl requires libpolyclipping.so.18
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:ctdb-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.10)
2:ctdb-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
2:ctdb-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.5)
2:ctdb-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.3.0)
2:ctdb-tests-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:ctdb-tests-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
2:samba-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.5)
2:samba-client-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.15)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.23)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_1.1.1)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_1.1.19)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.5)
2:samba-client-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.3.0)
2:samba-common-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-common-tools-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-common-tools-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
2:samba-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-libs-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
2:samba-python-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-python-4.5.1-1.fc26.armv7hl requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)
2:samba-test-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-test-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.15)
2:samba-test-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_1.1.14)
2:samba-test-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_1.1.25)
2:samba-test-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_1.1.27)
2:samba-test-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-test-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
2:samba-test-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.12)
2:samba-test-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.15)
2:samba-test-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.19)
2:samba-test-libs-4.5.1-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.24)
2:samba-winbind-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
2:samba-winbind-4.5.1-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.2)
[sslogger]
sslogger-0.96-13.fc22.armv7hl requires libgnutls.so.28
sslogger-0.96-13.fc22.armv7hl requires libgnutls.so.28(GNUTLS_1_4)
sslogger-slogd-0.96-13.fc22.armv7hl requires libgnutls.so.28
sslogger-slogd-0.96-13.fc22.armv7hl requires libgnutls.so.28(GNUTLS_1_4)
[sssd]
python2-sss-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
python3-sss-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-ad-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-common-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-common-1.14.2-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
sssd-common-pac-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-common-pac-1.14.2-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
sssd-dbus-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-dbus-1.14.2-1.fc26.armv7hl requires libtdb.so.1(TDB_1.2.1)
sssd-ipa-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
sssd-tools-1.14.2-1.fc26.armv7hl requires libldb.so.1(LDB_0.9.10)
[step]
step-16.08.2-1.fc26.armv7hl requires libqalculate.so.5
[syck]
syck-php-0.70-7.20130402.fc24.armv7hl requires php(api) = 0:20131106-32
syck-php-0.70-7.20130402.fc24.armv7hl requires php(zend-abi) = 0:20131226-32
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.armv7hl requires qt-mysql
[wgrib2]
wgrib2-2.0.3-2.fc24.armv7hl requires libjasper.so.1
[zoneminder]
zoneminder-1.28.1-6.fc25.armv7hl requires php-mysql
Broken deps for i386
----------------------------------------------------------
[Agda-stdlib]
Agda-stdlib-0.9-3.fc24.i686 requires ghc(base-4.7.0.2-6d16fd65767daf67b7606bd63b471328)
Agda-stdlib-0.9-3.fc24.i686 requires ghc-devel(base-4.7.0.2-6d16fd65767daf67b7606bd63b471328)
Agda-stdlib-0.9-3.fc24.i686 requires libHSbase-4.7.0.2-ghc7.8.4.so
Agda-stdlib-0.9-3.fc24.i686 requires libHSghc-prim-0.3.1.0-ghc7.8.4.so
Agda-stdlib-0.9-3.fc24.i686 requires libHSinteger-gmp-0.5.1.0-ghc7.8.4.so
[OmegaT]
OmegaT-2.6.3-2.fc22.i686 requires hunspell <= 0:1.4.0
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.i686 requires libmpi.so.12(openmpi-i386)
Ray-openmpi-2.3.1-12.fc24.i686 requires libmpi_cxx.so.1(openmpi-i386)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.i686 requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.i686 requires libtonezone.so.2.0
[ayttm]
ayttm-0.6.3-14.fc24.i686 requires libjasper.so.1
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[caja-extensions]
caja-beesu-1.16.0-1.fc26.i686 requires beesu
[calibre]
calibre-2.73.0-1.fc26.i686 requires qt5-qtbase(x86-32) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.i686 requires libpoppler.so.64
[cantor]
cantor-libs-16.08.2-1.fc26.i686 requires libqalculate.so.5
[cryptobone]
cryptobone-1.1.0-2.fc26.i686 requires beesu
[dcraw]
dcraw-9.27.0-1.fc25.i686 requires libjasper.so.1
[digikam]
digikam-5.3.0-3.fc26.i686 requires libjasper.so.1
digikam-libs-5.3.0-3.fc26.i686 requires libjasper.so.1
[dmlite]
dmlite-plugins-memcache-0.8.0-1.fc26.i686 requires libprotobuf.so.9
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.i686 requires libprotobuf.so.9
[dpm-dsi]
dpm-dsi-1.9.9-1.fc26.i686 requires globus-gridftp-server-progs(x86-32) = 0:11.3
[espresso]
espresso-openmpi-3.3.0-8.fc24.i686 requires libmpi.so.12(openmpi-i386)
espresso-openmpi-3.3.0-8.fc24.i686 requires libmpi_cxx.so.1(openmpi-i386)
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.i686 requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.i686 requires libgsoap++.so.9
fts-libs-3.4.3-5.fc26.i686 requires libgsoap++.so.9
fts-python-3.4.3-5.fc26.i686 requires libgsoap++.so.9
fts-server-3.4.3-5.fc26.i686 requires libgsoap++.so.9
[gammaray]
gammaray-qt5-2.6.0-1.fc26.i686 requires qt5-qtbase(x86-32) = 0:5.7.0
[gegl03]
gegl03-0.3.8-3.fc26.i686 requires libjasper.so.1
[getdp]
getdp-2.10.0-2.fc26.i686 requires libGmsh.so.2.14
[gimp]
2:gimp-2.8.18-2.fc26.i686 requires libjasper.so.1
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
[grib_api]
grib_api-1.19.0-1.fc26.i686 requires libjasper.so.1
python2-grib_api-1.19.0-1.fc26.i686 requires libjasper.so.1
[gyachi]
gyachi-1.2.11-14.fc24.i686 requires libjasper.so.1
[kdelibs]
6:kdelibs-4.14.24-1.fc26.i686 requires libjasper.so.1
[kdelibs3]
kdelibs3-3.5.10-77.fc26.i686 requires libjasper.so.1
[kopete]
kopete-16.08.1-3.fc26.i686 requires libjasper.so.1
kopete-libs-16.08.1-3.fc26.i686 requires libjasper.so.1
[krecipes]
krecipes-2.1.0-1.fc24.i686 requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.i686 requires libpodofo.so.0.9.1
[lemonpos]
lemonpos-0.9.4-14.fc24.i686 requires qt-mysql
[luckybackup]
luckybackup-0.4.8-8.fc24.i686 requires beesu
[minetest]
minetest-0.4.14-2.fc26.i686 requires libjsoncpp.so.1
minetest-server-0.4.14-2.fc26.i686 requires libjsoncpp.so.1
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[openchange]
openchange-2.3-13.fc25.i686 requires libldb.so.1(LDB_0.9.10)
openchange-2.3-13.fc25.i686 requires libldb.so.1(LDB_0.9.15)
openchange-client-2.3-13.fc25.i686 requires libldb.so.1(LDB_0.9.10)
[paraview]
paraview-5.2.0-1.fc26.i686 requires libprotobuf.so.9
paraview-mpich-5.2.0-1.fc26.i686 requires libprotobuf.so.9
paraview-openmpi-5.2.0-1.fc26.i686 requires libprotobuf.so.9
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.i686 requires libperl.so.5.22
perl-Data-Alias-1.20-2.fc24.i686 requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.i686 requires libzmq.so.1
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.i686 requires libzmq.so.3
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.i686 requires libzmq.so.1
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.i686 requires php(api) = 0:20131106-32
php-magickwand-1.0.9.2-9.fc24.i686 requires php(zend-abi) = 0:20131226-32
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.i686 requires php(api) = 0:20131106-32
php-pecl-cairo-0.3.2-11.fc25.i686 requires php(zend-abi) = 0:20131226-32
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.i686 requires php(api) = 0:20151012-32
php-pecl-event-2.1.0-1.fc25.i686 requires php(zend-abi) = 0:20151012-32
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.i686 requires php(api) = 0:20131106-32
php-pecl-parsekit-1.3.0-10.fc25.i686 requires php(zend-abi) = 0:20131226-32
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.i686 requires php(api) = 0:20131106-32
php-pecl-runkit-1.0.4-3.fc25.i686 requires php(zend-abi) = 0:20131226-32
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.i686 requires php(api) = 0:20131106-32
php-pecl-sphinx-1.3.2-6.fc24.i686 requires php(zend-abi) = 0:20131226-32
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.i686 requires libqalculate.so.5
[plplot]
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.i686 requires libgnutls.so.28
postal-0.70-15.fc23.i686 requires libgnutls.so.28(GNUTLS_1_4)
[pulseaudio]
pulseaudio-9.0-1.fc25.i686 requires libtdb.so.1(TDB_1.2.1)
[pygrib]
pygrib-2.0.2-2.fc26.i686 requires libjasper.so.1
python3-pygrib-2.0.2-2.fc26.i686 requires libjasper.so.1
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.i686 requires libqalculate.so.5
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.i686 requires libhunspell-1.3.so.0
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.i686 requires php(api) = 0:20131106-32
php-redland-1.0.16.1-16.fc25.i686 requires php(zend-abi) = 0:20131226-32
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.i686 requires libpolyclipping.so.18
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:ctdb-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.10)
2:ctdb-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:ctdb-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.5)
2:ctdb-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.3.0)
2:ctdb-tests-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:ctdb-tests-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.5)
2:samba-client-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.15)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.23)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.1)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.19)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.5)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.3.0)
2:samba-common-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-common-tools-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-common-tools-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-python-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-python-4.5.1-1.fc26.i686 requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)
2:samba-test-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-test-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.15)
2:samba-test-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.14)
2:samba-test-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.25)
2:samba-test-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.27)
2:samba-test-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.12)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.15)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.19)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.24)
2:samba-winbind-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-winbind-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
[sslogger]
sslogger-0.96-13.fc22.i686 requires libgnutls.so.28
sslogger-0.96-13.fc22.i686 requires libgnutls.so.28(GNUTLS_1_4)
sslogger-slogd-0.96-13.fc22.i686 requires libgnutls.so.28
sslogger-slogd-0.96-13.fc22.i686 requires libgnutls.so.28(GNUTLS_1_4)
[sssd]
python2-sss-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
python3-sss-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-ad-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-common-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-common-1.14.2-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
sssd-common-pac-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-common-pac-1.14.2-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
sssd-dbus-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-dbus-1.14.2-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
sssd-ipa-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-tools-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
[step]
step-16.08.2-1.fc26.i686 requires libqalculate.so.5
[syck]
syck-php-0.70-7.20130402.fc24.i686 requires php(api) = 0:20131106-32
syck-php-0.70-7.20130402.fc24.i686 requires php(zend-abi) = 0:20131226-32
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.i686 requires qt-mysql
[ugene]
ugene-1.25.0-2.fc26.i686 requires qt5-qtbase(x86-32) = 0:5.7.0
[wgrib2]
wgrib2-2.0.3-2.fc24.i686 requires libjasper.so.1
[zoneminder]
zoneminder-1.28.1-6.fc25.i686 requires php-mysql
Broken deps for ppc64
----------------------------------------------------------
[Agda-stdlib]
Agda-stdlib-0.9-3.fc24.ppc64 requires ghc(base-4.7.0.2-7694b0e9cd98062028967d7886dd9887)
Agda-stdlib-0.9-3.fc24.ppc64 requires ghc-devel(base-4.7.0.2-7694b0e9cd98062028967d7886dd9887)
Agda-stdlib-0.9-3.fc24.ppc64 requires libHSbase-4.7.0.2-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.ppc64 requires libHSghc-prim-0.3.1.0-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.ppc64 requires libHSinteger-gmp-0.5.1.0-ghc7.8.4.so()(64bit)
[OmegaT]
OmegaT-2.6.3-2.fc22.ppc64 requires hunspell <= 0:1.4.0
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.ppc64 requires libmpi.so.12()(64bit)(openmpi-ppc64)
Ray-openmpi-2.3.1-12.fc24.ppc64 requires libmpi_cxx.so.1()(64bit)(openmpi-ppc64)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.ppc64 requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.ppc64 requires libtonezone.so.2.0()(64bit)
[atomic]
atomic-1.14.0-2.dev.gite937650.fc26.ppc64 requires docker
atomic-1.14.0-2.dev.gite937650.fc26.ppc64 requires gomtree
atomic-1.14.0-2.dev.gite937650.fc26.ppc64 requires runc
atomic-1.14.0-2.dev.gite937650.fc26.ppc64 requires skopeo >= 0:0.1.14-4
atomic-1.14.0-2.dev.gite937650.fc26.ppc64 requires skopeo-containers >= 0:0.1.14-4
[atomicapp]
atomicapp-0.6.3-1.fc26.noarch requires docker
[ayttm]
ayttm-0.6.3-14.fc24.ppc64 requires libjasper.so.1()(64bit)
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[btbuilder]
btbuilder-data-0.5.13-1.fc26.noarch requires btbuilder = 0:0.5.13
[caja-extensions]
caja-beesu-1.16.0-1.fc26.ppc64 requires beesu
[calibre]
calibre-2.73.0-1.fc26.ppc64 requires qt5-qtbase(ppc-64) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.ppc64 requires libpoppler.so.64()(64bit)
[cantor]
cantor-libs-16.08.2-1.fc26.ppc64 requires libqalculate.so.5()(64bit)
[cjdns]
cjdns-python-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
cjdns-selinux-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
cjdns-tools-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
[copr-dist-git]
copr-dist-git-0.23-1.fc26.noarch requires docker
[dcraw]
dcraw-9.27.0-1.fc25.ppc64 requires libjasper.so.1()(64bit)
[digikam]
digikam-5.3.0-3.fc26.ppc64 requires libjasper.so.1()(64bit)
digikam-libs-5.3.0-3.fc26.ppc64 requires libjasper.so.1()(64bit)
[dmlite]
dmlite-plugins-memcache-0.8.0-1.fc26.ppc64 requires libprotobuf.so.9()(64bit)
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.ppc64 requires libprotobuf.so.9()(64bit)
[docker-anaconda-addon]
docker-anaconda-addon-0.4-2.fc25.noarch requires docker
docker-anaconda-addon-0.4-2.fc25.noarch requires docker-selinux
[dpm-dsi]
dpm-dsi-1.9.9-1.fc26.ppc64 requires globus-gridftp-server-progs(ppc-64) = 0:11.3
[eclipse-avr]
eclipse-avr-2.4.2-1.fc25.noarch requires avr-gdb
[erlang-riak_pipe]
erlang-riak_pipe-1.3.2-3.fc22.ppc64 requires erlang-riak_core(ppc-64) >= 0:1.3.2
[espresso]
espresso-openmpi-3.3.0-8.fc24.ppc64 requires libmpi.so.12()(64bit)(openmpi-ppc64)
espresso-openmpi-3.3.0-8.fc24.ppc64 requires libmpi_cxx.so.1()(64bit)(openmpi-ppc64)
[fawkes]
fawkes-devenv-0.5.0-30.fc25.noarch requires mongodb-server
fawkes-doc-0.5.0-30.fc25.noarch requires fawkes = 0:0.5.0-30.fc25
[fedora-dockerfiles]
fedora-dockerfiles-0-0.18.giteab04ff.fc24.ppc64 requires docker
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.ppc64 requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.ppc64 requires libgsoap++.so.9()(64bit)
fts-libs-3.4.3-5.fc26.ppc64 requires libgsoap++.so.9()(64bit)
fts-python-3.4.3-5.fc26.ppc64 requires libgsoap++.so.9()(64bit)
fts-server-3.4.3-5.fc26.ppc64 requires libgsoap++.so.9()(64bit)
[gammaray]
gammaray-qt5-2.6.0-1.fc26.ppc64 requires qt5-qtbase(ppc-64) = 0:5.7.0
[gap-pkg-polymaking]
gap-pkg-polymaking-0.8.1-5.fc25.noarch requires polymake
[gegl03]
gegl03-0.3.8-3.fc26.ppc64 requires libjasper.so.1()(64bit)
[getdp]
getdp-2.10.0-2.fc26.ppc64 requires libGmsh.so.2.14()(64bit)
[gif2png]
web2png-2.5.8-1807.fc24.noarch requires gif2png = 0:2.5.8-1807.fc24
[gimp]
2:gimp-2.8.18-2.fc26.ppc64 requires libjasper.so.1()(64bit)
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[gns3-server]
gns3-server-1.5.2-1.fc26.noarch requires docker
[gofed]
gofed-docker-1.0.0-0.5.rc1.fc26.noarch requires docker
[golang-github-docker-libcontainer]
golang-github-docker-libcontainer-devel-2.1.1-0.8.gitc964368.fc25.noarch requires golang(github.com/docker/docker/pkg/mount)
golang-github-docker-libcontainer-devel-2.1.1-0.8.gitc964368.fc25.noarch requires golang(github.com/docker/docker/pkg/symlink)
[golang-github-fsouza-go-dockerclient]
golang-github-fsouza-go-dockerclient-devel-0.2.1-17.git2350d7b.fc25.noarch requires golang(github.com/docker/docker/opts)
golang-github-fsouza-go-dockerclient-devel-0.2.1-17.git2350d7b.fc25.noarch requires golang(github.com/docker/docker/pkg/archive)
golang-github-fsouza-go-dockerclient-devel-0.2.1-17.git2350d7b.fc25.noarch requires golang(github.com/docker/docker/pkg/fileutils)
golang-github-fsouza-go-dockerclient-devel-0.2.1-17.git2350d7b.fc25.noarch requires golang(github.com/docker/docker/pkg/homedir)
golang-github-fsouza-go-dockerclient-devel-0.2.1-17.git2350d7b.fc25.noarch requires golang(github.com/docker/docker/pkg/stdcopy)
[golang-github-go-mgo-mgo]
golang-github-go-mgo-mgo-devel-0-0.6.gite30de8a.fc25.noarch requires mongodb
[golang-github-kubernetes-heapster]
golang-github-kubernetes-heapster-devel-0.16.1-4.fc25.noarch requires golang(github.com/google/cadvisor/client)
golang-github-kubernetes-heapster-devel-0.16.1-4.fc25.noarch requires golang(github.com/google/cadvisor/info/v1)
golang-github-kubernetes-heapster-devel-0.16.1-4.fc25.noarch requires golang(github.com/influxdb/influxdb/client)
[golang-github-rcrowley-go-metrics]
golang-github-rcrowley-go-metrics-devel-0-0.8.gitdee209f.fc25.noarch requires golang(github.com/influxdb/influxdb/client)
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/jsonlog)
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/stdcopy)
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/utils)
[golang-github-yvasiyarov-go-metrics]
golang-github-yvasiyarov-go-metrics-devel-0-0.2.git57bccd1.fc25.noarch requires golang(github.com/influxdb/influxdb/client)
[grib_api]
grib_api-1.19.0-1.fc26.ppc64 requires libjasper.so.1()(64bit)
python2-grib_api-1.19.0-1.fc26.ppc64 requires libjasper.so.1()(64bit)
[gyachi]
gyachi-1.2.11-14.fc24.ppc64 requires libjasper.so.1()(64bit)
[icaro]
icaro-1.0.7-1.fc26.noarch requires sdcc
[java-gnome]
java-gnome-javadoc-4.1.3-9.fc24.noarch requires java-gnome = 0:4.1.3-9.fc24
[kdelibs]
6:kdelibs-4.14.24-1.fc26.ppc64 requires libjasper.so.1()(64bit)
[kdelibs3]
kdelibs3-3.5.10-77.fc26.ppc64 requires libjasper.so.1()(64bit)
[kopete]
kopete-16.08.1-3.fc26.ppc64 requires libjasper.so.1()(64bit)
kopete-libs-16.08.1-3.fc26.ppc64 requires libjasper.so.1()(64bit)
[kosmtik]
kosmtik-0.0.13-13.fc26.noarch requires npm(mapnik) >= 0:3.4.7
kosmtik-0.0.13-13.fc26.noarch requires npm(mapnik) < 0:4
[krecipes]
krecipes-2.1.0-1.fc24.ppc64 requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.ppc64 requires libpodofo.so.0.9.1()(64bit)
[ktechlab]
ktechlab-0.3.70-16.20090304svn.fc23.ppc64 requires sdcc
[laditools]
laditools-1.0.1-12.fc25.noarch requires a2jmidid
[lemonpos]
lemonpos-0.9.4-14.fc24.ppc64 requires qt-mysql
[linbox]
linbox-doc-1.4.2-4.fc26.noarch requires linbox = 0:1.4.2-4.fc26
[lorax]
lorax-lmc-virt-26.2-1.fc26.ppc64 requires edk2-ovmf
[luckybackup]
luckybackup-0.4.8-8.fc24.ppc64 requires beesu
[mcu8051ide]
mcu8051ide-1.4.9-3.fc24.noarch requires sdcc
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[msp430-libc]
msp430-libc-20120224-7.fc24.noarch requires msp430-gcc >= 0:4.6.3
[nik4]
nik4-1.6.0-1.fc25.noarch requires python3-mapnik
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[nodejs-tilelive-mapnik]
nodejs-tilelive-mapnik-0.6.18-2.fc25.noarch requires npm(mapnik) >= 0:3.2.0
[olpc-netutils]
olpc-netutils-0.8.2-7.fc24.noarch requires olpc-utils >= 0:1.3.1
[openchange]
openchange-2.3-13.fc25.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
openchange-2.3-13.fc25.ppc64 requires libldb.so.1(LDB_0.9.15)(64bit)
openchange-client-2.3-13.fc25.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
[paraview]
paraview-5.2.0-1.fc26.ppc64 requires libprotobuf.so.9()(64bit)
paraview-mpich-5.2.0-1.fc26.ppc64 requires libprotobuf.so.9()(64bit)
paraview-openmpi-5.2.0-1.fc26.ppc64 requires libprotobuf.so.9()(64bit)
[perl-Alien-ROOT]
perl-Alien-ROOT-5.34.36.1-2.fc26.noarch requires root-core
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.ppc64 requires libperl.so.5.22()(64bit)
perl-Data-Alias-1.20-2.fc24.ppc64 requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.ppc64 requires libzmq.so.1()(64bit)
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.ppc64 requires libzmq.so.3()(64bit)
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.ppc64 requires libzmq.so.1()(64bit)
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.ppc64 requires php(api) = 0:20131106-64
php-magickwand-1.0.9.2-9.fc24.ppc64 requires php(zend-abi) = 0:20131226-64
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.ppc64 requires php(api) = 0:20131106-64
php-pecl-cairo-0.3.2-11.fc25.ppc64 requires php(zend-abi) = 0:20131226-64
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.ppc64 requires php(api) = 0:20151012-64
php-pecl-event-2.1.0-1.fc25.ppc64 requires php(zend-abi) = 0:20151012-64
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.ppc64 requires php(api) = 0:20131106-64
php-pecl-parsekit-1.3.0-10.fc25.ppc64 requires php(zend-abi) = 0:20131226-64
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.ppc64 requires php(api) = 0:20131106-64
php-pecl-runkit-1.0.4-3.fc25.ppc64 requires php(zend-abi) = 0:20131226-64
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.ppc64 requires php(api) = 0:20131106-64
php-pecl-sphinx-1.3.2-6.fc24.ppc64 requires php(zend-abi) = 0:20131226-64
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.ppc64 requires libqalculate.so.5()(64bit)
[plplot]
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.ppc64 requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.ppc64 requires libgnutls.so.28()(64bit)
postal-0.70-15.fc23.ppc64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[pulseaudio]
pulseaudio-9.0-1.fc25.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
[pygrib]
pygrib-2.0.2-2.fc26.ppc64 requires libjasper.so.1()(64bit)
python3-pygrib-2.0.2-2.fc26.ppc64 requires libjasper.so.1()(64bit)
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ccdproc]
python2-ccdproc-1.1.0-2.fc26.noarch requires python2-astroscrappy
python2-ccdproc-1.1.0-2.fc26.noarch requires python2-reproject
python3-ccdproc-1.1.0-2.fc26.noarch requires python3-astroscrappy
python3-ccdproc-1.1.0-2.fc26.noarch requires python3-reproject
[python-etcd]
python2-python-etcd-0.4.3-5.fc26.noarch requires etcd
python3-python-etcd-0.4.3-5.fc26.noarch requires etcd
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-moss]
python2-moss-0.3.4-7.fc26.noarch requires python2-nipy
python3-moss-0.3.4-7.fc26.noarch requires python3-nipy
[python-ovirt-register]
python3-ovirt-register-1.0.0-11.fc25.noarch requires dmidecode
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.ppc64 requires libqalculate.so.5()(64bit)
[qt4pas]
qt4pas-2.5-9.fc25.ppc64 requires fpc-src
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.ppc64 requires libhunspell-1.3.so.0()(64bit)
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(kgio)
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.ppc64 requires php(api) = 0:20131106-64
php-redland-1.0.16.1-16.fc25.ppc64 requires php(zend-abi) = 0:20131226-64
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.ppc64 requires libpolyclipping.so.18()(64bit)
[rpm-ostree-toolbox]
rpm-ostree-toolbox-2016.4-2.fc26.ppc64 requires docker
[rubygem-bson]
rubygem-bson-doc-4.1.1-1.fc26.noarch requires rubygem-bson = 0:4.1.1-1.fc26
[rubygem-mongo]
rubygem-mongo-2.3.0-1.fc26.noarch requires rubygem(bson) >= 0:4.1
rubygem-mongo-2.3.0-1.fc26.noarch requires rubygem(bson) < 0:5
[runc]
1:runc-devel-1.0.0-1.rc1.git04f275d.fc26.noarch requires golang(github.com/docker/docker/pkg/mount)
1:runc-devel-1.0.0-1.rc1.git04f275d.fc26.noarch requires golang(github.com/docker/docker/pkg/symlink)
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.10)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:ctdb-tests-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-tests-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.23)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_1.1.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_1.1.19)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:samba-common-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-libs-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-python-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-python-4.5.1-1.fc26.ppc64 requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_1.1.14)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_1.1.25)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_1.1.27)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.12)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.19)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.24)(64bit)
2:samba-winbind-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-winbind-4.5.1-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.2)(64bit)
[scilab]
scilab-doc-6.0.0-0.7.beta2.fc25.noarch requires scilab = 0:6.0.0-0.7.beta2.fc25
scilab-tests-6.0.0-0.7.beta2.fc25.noarch requires scilab = 0:6.0.0-0.7.beta2.fc25
[source-to-image]
source-to-image-1.0.9-2.fc25.ppc64 requires docker
[sslogger]
sslogger-0.96-13.fc22.ppc64 requires libgnutls.so.28()(64bit)
sslogger-0.96-13.fc22.ppc64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
sslogger-slogd-0.96-13.fc22.ppc64 requires libgnutls.so.28()(64bit)
sslogger-slogd-0.96-13.fc22.ppc64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[sssd]
python2-sss-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
python3-sss-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-ad-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-common-pac-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-pac-1.14.2-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-dbus-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-dbus-1.14.2-1.fc26.ppc64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-ipa-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-tools-1.14.2-1.fc26.ppc64 requires libldb.so.1(LDB_0.9.10)(64bit)
[step]
step-16.08.2-1.fc26.ppc64 requires libqalculate.so.5()(64bit)
[syck]
syck-php-0.70-7.20130402.fc24.ppc64 requires php(api) = 0:20131106-64
syck-php-0.70-7.20130402.fc24.ppc64 requires php(zend-abi) = 0:20131226-64
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.ppc64 requires qt-mysql
[vim-syntastic]
vim-syntastic-lisp-3.8.0-3.fc26.noarch requires clisp
[warzone2100]
warzone2100-sequences-3.2.1-1.fc26.noarch requires warzone2100
[wesnoth]
wesnoth-data-1.13.5-1.fc26.noarch requires wesnoth = 0:1.13.5
[wgrib2]
wgrib2-2.0.3-2.fc24.ppc64 requires libjasper.so.1()(64bit)
[zoneminder]
zoneminder-1.28.1-6.fc25.ppc64 requires php-mysql
Broken deps for ppc64le
----------------------------------------------------------
[Agda-stdlib]
Agda-stdlib-0.9-3.fc24.ppc64le requires ghc(base-4.7.0.2-59a87b9ebf7d6606976869dd31a8cf3e)
Agda-stdlib-0.9-3.fc24.ppc64le requires ghc-devel(base-4.7.0.2-59a87b9ebf7d6606976869dd31a8cf3e)
Agda-stdlib-0.9-3.fc24.ppc64le requires libHSbase-4.7.0.2-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.ppc64le requires libHSghc-prim-0.3.1.0-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.ppc64le requires libHSinteger-gmp-0.5.1.0-ghc7.8.4.so()(64bit)
[OmegaT]
OmegaT-2.6.3-2.fc22.ppc64le requires hunspell <= 0:1.4.0
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.ppc64le requires libmpi.so.12()(64bit)(openmpi-ppc64le)
Ray-openmpi-2.3.1-12.fc24.ppc64le requires libmpi_cxx.so.1()(64bit)(openmpi-ppc64le)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.ppc64le requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.ppc64le requires libtonezone.so.2.0()(64bit)
[atomic]
atomic-1.14.0-2.dev.gite937650.fc26.ppc64le requires gomtree
atomic-1.14.0-2.dev.gite937650.fc26.ppc64le requires runc
[ayttm]
ayttm-0.6.3-14.fc24.ppc64le requires libjasper.so.1()(64bit)
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[btbuilder]
btbuilder-data-0.5.13-1.fc26.noarch requires btbuilder = 0:0.5.13
[caja-extensions]
caja-beesu-1.16.0-1.fc26.ppc64le requires beesu
[calibre]
calibre-2.73.0-1.fc26.ppc64le requires qt5-qtbase(ppc-64) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.ppc64le requires libpoppler.so.64()(64bit)
[cantor]
cantor-libs-16.08.2-1.fc26.ppc64le requires libqalculate.so.5()(64bit)
[cjdns]
cjdns-python-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
cjdns-selinux-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
cjdns-tools-18-3.fc26.noarch requires cjdns = 0:18-3.fc26
[cockpit]
cockpit-kubernetes-125-1.fc26.ppc64le requires /usr/bin/kubectl
[dcraw]
dcraw-9.27.0-1.fc25.ppc64le requires libjasper.so.1()(64bit)
[digikam]
digikam-5.3.0-3.fc26.ppc64le requires libjasper.so.1()(64bit)
digikam-libs-5.3.0-3.fc26.ppc64le requires libjasper.so.1()(64bit)
[dmlite]
dmlite-dpmdisk-0.8.0-1.fc26.ppc64le requires dpm-dsi(ppc-64)
dmlite-dpmhead-0.8.0-1.fc26.ppc64le requires dpm-dsi(ppc-64)
dmlite-plugins-memcache-0.8.0-1.fc26.ppc64le requires libprotobuf.so.9()(64bit)
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.ppc64le requires libprotobuf.so.9()(64bit)
[docker]
2:docker-fish-completion-1.12.3-26.git97974ae.fc26.ppc64le requires fish
[docker-latest]
2:docker-latest-fish-completion-1.13-22.git6cd0bbe.fc26.ppc64le requires fish
[eclipse-avr]
eclipse-avr-2.4.2-1.fc25.noarch requires avr-gdb
[erlang-riak_pipe]
erlang-riak_pipe-1.3.2-3.fc22.ppc64le requires erlang-riak_core(ppc-64) >= 0:1.3.2
[espresso]
espresso-openmpi-3.3.0-8.fc24.ppc64le requires libmpi.so.12()(64bit)(openmpi-ppc64le)
espresso-openmpi-3.3.0-8.fc24.ppc64le requires libmpi_cxx.so.1()(64bit)(openmpi-ppc64le)
[fawkes]
fawkes-doc-0.5.0-30.fc25.noarch requires fawkes = 0:0.5.0-30.fc25
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.ppc64le requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.ppc64le requires libgsoap++.so.9()(64bit)
fts-libs-3.4.3-5.fc26.ppc64le requires libgsoap++.so.9()(64bit)
fts-python-3.4.3-5.fc26.ppc64le requires libgsoap++.so.9()(64bit)
fts-server-3.4.3-5.fc26.ppc64le requires libgsoap++.so.9()(64bit)
[gammaray]
gammaray-qt5-2.6.0-1.fc26.ppc64le requires qt5-qtbase(ppc-64) = 0:5.7.0
[gap-pkg-polymaking]
gap-pkg-polymaking-0.8.1-5.fc25.noarch requires polymake
[gegl03]
gegl03-0.3.8-3.fc26.ppc64le requires libjasper.so.1()(64bit)
[getdp]
getdp-2.10.0-2.fc26.ppc64le requires libGmsh.so.2.14()(64bit)
[gif2png]
web2png-2.5.8-1807.fc24.noarch requires gif2png = 0:2.5.8-1807.fc24
[gimp]
2:gimp-2.8.18-2.fc26.ppc64le requires libjasper.so.1()(64bit)
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
[grib_api]
grib_api-1.19.0-1.fc26.ppc64le requires libjasper.so.1()(64bit)
python2-grib_api-1.19.0-1.fc26.ppc64le requires libjasper.so.1()(64bit)
[gyachi]
gyachi-1.2.11-14.fc24.ppc64le requires libjasper.so.1()(64bit)
[icaro]
icaro-1.0.7-1.fc26.noarch requires sdcc
[java-gnome]
java-gnome-javadoc-4.1.3-9.fc24.noarch requires java-gnome = 0:4.1.3-9.fc24
[kdelibs]
6:kdelibs-4.14.24-1.fc26.ppc64le requires libjasper.so.1()(64bit)
[kdelibs3]
kdelibs3-3.5.10-77.fc26.ppc64le requires libjasper.so.1()(64bit)
[kopete]
kopete-16.08.1-3.fc26.ppc64le requires libjasper.so.1()(64bit)
kopete-libs-16.08.1-3.fc26.ppc64le requires libjasper.so.1()(64bit)
[kosmtik]
kosmtik-0.0.13-13.fc26.noarch requires npm(mapnik) >= 0:3.4.7
kosmtik-0.0.13-13.fc26.noarch requires npm(mapnik) < 0:4
[krecipes]
krecipes-2.1.0-1.fc24.ppc64le requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.ppc64le requires libpodofo.so.0.9.1()(64bit)
[ktechlab]
ktechlab-0.3.70-16.20090304svn.fc23.ppc64le requires sdcc
[laditools]
laditools-1.0.1-12.fc25.noarch requires a2jmidid
[lemonpos]
lemonpos-0.9.4-14.fc24.ppc64le requires qt-mysql
[linbox]
linbox-doc-1.4.2-4.fc26.noarch requires linbox = 0:1.4.2-4.fc26
[lorax]
lorax-lmc-virt-26.2-1.fc26.ppc64le requires edk2-ovmf
[luckybackup]
luckybackup-0.4.8-8.fc24.ppc64le requires beesu
[mcu8051ide]
mcu8051ide-1.4.9-3.fc24.noarch requires sdcc
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[msp430-libc]
msp430-libc-20120224-7.fc24.noarch requires msp430-gcc >= 0:4.6.3
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[nodejs-tilelive-mapnik]
nodejs-tilelive-mapnik-0.6.18-2.fc25.noarch requires npm(mapnik) >= 0:3.2.0
[olpc-netutils]
olpc-netutils-0.8.2-7.fc24.noarch requires olpc-utils >= 0:1.3.1
[openchange]
openchange-2.3-13.fc25.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
openchange-2.3-13.fc25.ppc64le requires libldb.so.1(LDB_0.9.15)(64bit)
openchange-client-2.3-13.fc25.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
[paraview]
paraview-5.2.0-1.fc26.ppc64le requires libprotobuf.so.9()(64bit)
paraview-mpich-5.2.0-1.fc26.ppc64le requires libprotobuf.so.9()(64bit)
paraview-openmpi-5.2.0-1.fc26.ppc64le requires libprotobuf.so.9()(64bit)
[perl-Alien-ROOT]
perl-Alien-ROOT-5.34.36.1-2.fc26.noarch requires root-core
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.ppc64le requires libperl.so.5.22()(64bit)
perl-Data-Alias-1.20-2.fc24.ppc64le requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.ppc64le requires libzmq.so.1()(64bit)
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.ppc64le requires libzmq.so.3()(64bit)
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.ppc64le requires libzmq.so.1()(64bit)
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.ppc64le requires php(api) = 0:20131106-64
php-magickwand-1.0.9.2-9.fc24.ppc64le requires php(zend-abi) = 0:20131226-64
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.ppc64le requires php(api) = 0:20131106-64
php-pecl-cairo-0.3.2-11.fc25.ppc64le requires php(zend-abi) = 0:20131226-64
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.ppc64le requires php(api) = 0:20151012-64
php-pecl-event-2.1.0-1.fc25.ppc64le requires php(zend-abi) = 0:20151012-64
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.ppc64le requires php(api) = 0:20131106-64
php-pecl-parsekit-1.3.0-10.fc25.ppc64le requires php(zend-abi) = 0:20131226-64
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.ppc64le requires php(api) = 0:20131106-64
php-pecl-runkit-1.0.4-3.fc25.ppc64le requires php(zend-abi) = 0:20131226-64
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.ppc64le requires php(api) = 0:20131106-64
php-pecl-sphinx-1.3.2-6.fc24.ppc64le requires php(zend-abi) = 0:20131226-64
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.ppc64le requires libqalculate.so.5()(64bit)
[plplot]
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.ppc64le requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.ppc64le requires libgnutls.so.28()(64bit)
postal-0.70-15.fc23.ppc64le requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[pulseaudio]
pulseaudio-9.0-1.fc25.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
[pygrib]
pygrib-2.0.2-2.fc26.ppc64le requires libjasper.so.1()(64bit)
python3-pygrib-2.0.2-2.fc26.ppc64le requires libjasper.so.1()(64bit)
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ccdproc]
python2-ccdproc-1.1.0-2.fc26.noarch requires python2-astroscrappy
python2-ccdproc-1.1.0-2.fc26.noarch requires python2-reproject
python3-ccdproc-1.1.0-2.fc26.noarch requires python3-astroscrappy
python3-ccdproc-1.1.0-2.fc26.noarch requires python3-reproject
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-moss]
python2-moss-0.3.4-7.fc26.noarch requires python2-nipy
python3-moss-0.3.4-7.fc26.noarch requires python3-nipy
[python-ovirt-register]
python3-ovirt-register-1.0.0-11.fc25.noarch requires dmidecode
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.ppc64le requires libqalculate.so.5()(64bit)
[qt4pas]
qt4pas-2.5-9.fc25.ppc64le requires fpc-src
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.ppc64le requires libhunspell-1.3.so.0()(64bit)
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(kgio)
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.ppc64le requires php(api) = 0:20131106-64
php-redland-1.0.16.1-16.fc25.ppc64le requires php(zend-abi) = 0:20131226-64
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.ppc64le requires libpolyclipping.so.18()(64bit)
[rubygem-bson]
rubygem-bson-doc-4.1.1-1.fc26.noarch requires rubygem-bson = 0:4.1.1-1.fc26
[rubygem-mongo]
rubygem-mongo-2.3.0-1.fc26.noarch requires rubygem(bson) >= 0:4.1
rubygem-mongo-2.3.0-1.fc26.noarch requires rubygem(bson) < 0:5
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.10)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.5)(64bit)
2:ctdb-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.3.0)(64bit)
2:ctdb-tests-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-tests-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.23)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_1.1.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_1.1.19)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.3.0)(64bit)
2:samba-common-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-libs-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-python-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-python-4.5.1-1.fc26.ppc64le requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_1.1.14)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_1.1.25)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_1.1.27)(64bit)
2:samba-test-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.12)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.19)(64bit)
2:samba-test-libs-4.5.1-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.24)(64bit)
2:samba-winbind-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-winbind-4.5.1-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.2)(64bit)
[scilab]
scilab-doc-6.0.0-0.7.beta2.fc25.noarch requires scilab = 0:6.0.0-0.7.beta2.fc25
scilab-tests-6.0.0-0.7.beta2.fc25.noarch requires scilab = 0:6.0.0-0.7.beta2.fc25
[sslogger]
sslogger-0.96-13.fc22.ppc64le requires libgnutls.so.28()(64bit)
sslogger-0.96-13.fc22.ppc64le requires libgnutls.so.28(GNUTLS_1_4)(64bit)
sslogger-slogd-0.96-13.fc22.ppc64le requires libgnutls.so.28()(64bit)
sslogger-slogd-0.96-13.fc22.ppc64le requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[sssd]
python2-sss-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
python3-sss-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-ad-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-common-pac-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-pac-1.14.2-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-dbus-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-dbus-1.14.2-1.fc26.ppc64le requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-ipa-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-tools-1.14.2-1.fc26.ppc64le requires libldb.so.1(LDB_0.9.10)(64bit)
[step]
step-16.08.2-1.fc26.ppc64le requires libqalculate.so.5()(64bit)
[syck]
syck-php-0.70-7.20130402.fc24.ppc64le requires php(api) = 0:20131106-64
syck-php-0.70-7.20130402.fc24.ppc64le requires php(zend-abi) = 0:20131226-64
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.ppc64le requires qt-mysql
[vim-syntastic]
vim-syntastic-lisp-3.8.0-3.fc26.noarch requires clisp
[warzone2100]
warzone2100-sequences-3.2.1-1.fc26.noarch requires warzone2100
[wesnoth]
wesnoth-data-1.13.5-1.fc26.noarch requires wesnoth = 0:1.13.5
[wgrib2]
wgrib2-2.0.3-2.fc24.ppc64le requires libjasper.so.1()(64bit)
[zoneminder]
zoneminder-1.28.1-6.fc25.ppc64le requires php-mysql
Broken deps for x86_64
----------------------------------------------------------
[Agda-stdlib]
Agda-stdlib-0.9-3.fc24.x86_64 requires ghc(base-4.7.0.2-cb23b5265b6e147094c0cd9ac819acb1)
Agda-stdlib-0.9-3.fc24.x86_64 requires ghc-devel(base-4.7.0.2-cb23b5265b6e147094c0cd9ac819acb1)
Agda-stdlib-0.9-3.fc24.x86_64 requires libHSbase-4.7.0.2-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.x86_64 requires libHSghc-prim-0.3.1.0-ghc7.8.4.so()(64bit)
Agda-stdlib-0.9-3.fc24.x86_64 requires libHSinteger-gmp-0.5.1.0-ghc7.8.4.so()(64bit)
[OmegaT]
OmegaT-2.6.3-2.fc22.x86_64 requires hunspell <= 0:1.4.0
[RackTables]
RackTables-0.20.10-7.fc24.noarch requires php-mysql
[Ray]
Ray-openmpi-2.3.1-12.fc24.x86_64 requires libmpi.so.12()(64bit)(openmpi-x86_64)
Ray-openmpi-2.3.1-12.fc24.x86_64 requires libmpi_cxx.so.1()(64bit)(openmpi-x86_64)
[asterisk]
asterisk-dahdi-13.9.1-1.fc25.1.x86_64 requires dahdi-tools >= 0:2.0.0
asterisk-dahdi-13.9.1-1.fc25.1.x86_64 requires libtonezone.so.2.0()(64bit)
[ayttm]
ayttm-0.6.3-14.fc24.x86_64 requires libjasper.so.1()(64bit)
[beacon]
beacon-0.5-13.fc24.noarch requires php-mysql
[caja-extensions]
caja-beesu-1.16.0-1.fc26.x86_64 requires beesu
[calibre]
calibre-2.73.0-1.fc26.x86_64 requires qt5-qtbase(x86-64) = 0:5.7.0
[calligra]
calligra-core-2.9.11-11.fc26.x86_64 requires libpoppler.so.64()(64bit)
[cantor]
cantor-libs-16.08.2-1.fc26.i686 requires libqalculate.so.5
cantor-libs-16.08.2-1.fc26.x86_64 requires libqalculate.so.5()(64bit)
[cryptobone]
cryptobone-1.1.0-2.fc26.i686 requires beesu
cryptobone-1.1.0-2.fc26.x86_64 requires beesu
[dcraw]
dcraw-9.27.0-1.fc25.x86_64 requires libjasper.so.1()(64bit)
[digikam]
digikam-5.3.0-3.fc26.x86_64 requires libjasper.so.1()(64bit)
digikam-libs-5.3.0-3.fc26.i686 requires libjasper.so.1
digikam-libs-5.3.0-3.fc26.x86_64 requires libjasper.so.1()(64bit)
[dmlite]
dmlite-plugins-memcache-0.8.0-1.fc26.x86_64 requires libprotobuf.so.9()(64bit)
[dmlite-plugins-s3]
dmlite-plugins-s3-0.7.0-3.fc24.x86_64 requires libprotobuf.so.9()(64bit)
[dpm-dsi]
dpm-dsi-1.9.9-1.fc26.x86_64 requires globus-gridftp-server-progs(x86-64) = 0:11.3
[espresso]
espresso-openmpi-3.3.0-8.fc24.x86_64 requires libmpi.so.12()(64bit)(openmpi-x86_64)
espresso-openmpi-3.3.0-8.fc24.x86_64 requires libmpi_cxx.so.1()(64bit)(openmpi-x86_64)
[freemedforms]
freemedforms-emr-0.9.4-6.fc25.x86_64 requires qt-mysql
[fts]
fts-client-3.4.3-5.fc26.x86_64 requires libgsoap++.so.9()(64bit)
fts-libs-3.4.3-5.fc26.i686 requires libgsoap++.so.9
fts-libs-3.4.3-5.fc26.x86_64 requires libgsoap++.so.9()(64bit)
fts-python-3.4.3-5.fc26.x86_64 requires libgsoap++.so.9()(64bit)
fts-server-3.4.3-5.fc26.i686 requires libgsoap++.so.9
fts-server-3.4.3-5.fc26.x86_64 requires libgsoap++.so.9()(64bit)
[gammaray]
gammaray-qt5-2.6.0-1.fc26.i686 requires qt5-qtbase(x86-32) = 0:5.7.0
gammaray-qt5-2.6.0-1.fc26.x86_64 requires qt5-qtbase(x86-64) = 0:5.7.0
[gegl03]
gegl03-0.3.8-3.fc26.i686 requires libjasper.so.1
gegl03-0.3.8-3.fc26.x86_64 requires libjasper.so.1()(64bit)
[getdp]
getdp-2.10.0-2.fc26.i686 requires libGmsh.so.2.14
getdp-2.10.0-2.fc26.x86_64 requires libGmsh.so.2.14()(64bit)
[gimp]
2:gimp-2.8.18-2.fc26.x86_64 requires libjasper.so.1()(64bit)
[gnome-shell-extensions]
gnome-shell-extension-common-3.23.2-1.fc26.noarch requires gnome-shell >= 0:3.23.2
[golang-github-samalba-dockerclient]
golang-github-samalba-dockerclient-devel-0-0.3.gitc37a52f.fc24.noarch requires golang(github.com/docker/docker/pkg/timeutils)
[grib_api]
grib_api-1.19.0-1.fc26.i686 requires libjasper.so.1
grib_api-1.19.0-1.fc26.x86_64 requires libjasper.so.1()(64bit)
python2-grib_api-1.19.0-1.fc26.x86_64 requires libjasper.so.1()(64bit)
[gyachi]
gyachi-1.2.11-14.fc24.x86_64 requires libjasper.so.1()(64bit)
[kdelibs]
6:kdelibs-4.14.24-1.fc26.i686 requires libjasper.so.1
6:kdelibs-4.14.24-1.fc26.x86_64 requires libjasper.so.1()(64bit)
[kdelibs3]
kdelibs3-3.5.10-77.fc26.i686 requires libjasper.so.1
kdelibs3-3.5.10-77.fc26.x86_64 requires libjasper.so.1()(64bit)
[kopete]
kopete-16.08.1-3.fc26.x86_64 requires libjasper.so.1()(64bit)
kopete-libs-16.08.1-3.fc26.i686 requires libjasper.so.1
kopete-libs-16.08.1-3.fc26.x86_64 requires libjasper.so.1()(64bit)
[krecipes]
krecipes-2.1.0-1.fc24.x86_64 requires qt4-mysql
[krename]
krename-4.0.9-15.fc23.x86_64 requires libpodofo.so.0.9.1()(64bit)
[lemonpos]
lemonpos-0.9.4-14.fc24.x86_64 requires qt-mysql
[luckybackup]
luckybackup-0.4.8-8.fc24.x86_64 requires beesu
[mesos]
mesos-0.23.0-0.4ce5475.fc24.1.x86_64 requires libprotobuf.so.9()(64bit)
python-mesos-0.23.0-0.4ce5475.fc24.1.x86_64 requires libprotobuf.so.9()(64bit)
[minetest]
minetest-0.4.14-2.fc26.x86_64 requires libjsoncpp.so.1()(64bit)
minetest-server-0.4.14-2.fc26.x86_64 requires libjsoncpp.so.1()(64bit)
[moksha]
moksha-server-1.0.0-11.fc24.noarch requires orbited
[mrbs]
mrbs-1.4.10-4.fc24.noarch requires php-mysql
[nodejs-file-entry-cache]
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) >= 0:1.0.9
nodejs-file-entry-cache-1.2.4-1.fc26.noarch requires npm(flat-cache) < 0:2
[nodejs-grunt-contrib-csslint]
nodejs-grunt-contrib-csslint-0.4.0-6.fc24.noarch requires npm(strip-json-comments) < 0:2
[nodejs-pac-resolver]
nodejs-pac-resolver-1.2.6-3.fc24.noarch requires npm(co) < 0:4
[openchange]
openchange-2.3-13.fc25.i686 requires libldb.so.1(LDB_0.9.10)
openchange-2.3-13.fc25.i686 requires libldb.so.1(LDB_0.9.15)
openchange-2.3-13.fc25.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
openchange-2.3-13.fc25.x86_64 requires libldb.so.1(LDB_0.9.15)(64bit)
openchange-client-2.3-13.fc25.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
[paraview]
paraview-5.2.0-1.fc26.i686 requires libprotobuf.so.9
paraview-5.2.0-1.fc26.x86_64 requires libprotobuf.so.9()(64bit)
paraview-mpich-5.2.0-1.fc26.i686 requires libprotobuf.so.9
paraview-mpich-5.2.0-1.fc26.x86_64 requires libprotobuf.so.9()(64bit)
paraview-openmpi-5.2.0-1.fc26.i686 requires libprotobuf.so.9
paraview-openmpi-5.2.0-1.fc26.x86_64 requires libprotobuf.so.9()(64bit)
[perl-Data-Alias]
perl-Data-Alias-1.20-2.fc24.x86_64 requires libperl.so.5.22()(64bit)
perl-Data-Alias-1.20-2.fc24.x86_64 requires perl(:MODULE_COMPAT_5.22.1)
[perl-ZMQ-LibZMQ2]
perl-ZMQ-LibZMQ2-1.09-9.fc25.x86_64 requires libzmq.so.1()(64bit)
[perl-ZMQ-LibZMQ3]
perl-ZMQ-LibZMQ3-1.19-5.fc25.x86_64 requires libzmq.so.3()(64bit)
[perl-ZeroMQ]
perl-ZeroMQ-0.23-13.fc25.x86_64 requires libzmq.so.1()(64bit)
[php-magickwand]
php-magickwand-1.0.9.2-9.fc24.x86_64 requires php(api) = 0:20131106-64
php-magickwand-1.0.9.2-9.fc24.x86_64 requires php(zend-abi) = 0:20131226-64
[php-pecl-cairo]
php-pecl-cairo-0.3.2-11.fc25.x86_64 requires php(api) = 0:20131106-64
php-pecl-cairo-0.3.2-11.fc25.x86_64 requires php(zend-abi) = 0:20131226-64
[php-pecl-event]
php-pecl-event-2.1.0-1.fc25.x86_64 requires php(api) = 0:20151012-64
php-pecl-event-2.1.0-1.fc25.x86_64 requires php(zend-abi) = 0:20151012-64
[php-pecl-parsekit]
php-pecl-parsekit-1.3.0-10.fc25.x86_64 requires php(api) = 0:20131106-64
php-pecl-parsekit-1.3.0-10.fc25.x86_64 requires php(zend-abi) = 0:20131226-64
[php-pecl-runkit]
php-pecl-runkit-1.0.4-3.fc25.x86_64 requires php(api) = 0:20131106-64
php-pecl-runkit-1.0.4-3.fc25.x86_64 requires php(zend-abi) = 0:20131226-64
[php-pecl-sphinx]
php-pecl-sphinx-1.3.2-6.fc24.x86_64 requires php(api) = 0:20131106-64
php-pecl-sphinx-1.3.2-6.fc24.x86_64 requires php(zend-abi) = 0:20131226-64
[plasma-workspace]
plasma-workspace-libs-5.8.4-1.fc26.i686 requires libqalculate.so.5
plasma-workspace-libs-5.8.4-1.fc26.x86_64 requires libqalculate.so.5()(64bit)
[plplot]
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.i686 requires ocaml(runtime) = 0:4.02.3
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Array) = 0:ae800d8cf9903f1d36856950940430e6
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Bigarray) = 0:0643187a8b562858118690c393d01c2e
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Buffer) = 0:a579f4a57e300ec755f84af883c1e51b
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Cairo) = 0:fe6556ea6db9343f4dc65d6f188652aa
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Callback) = 0:deb9226b3de6bdba985bad268a5b7c51
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(CamlinternalFormatBasics) = 0:8b069fca1e4d9316b588e5554f38bb24
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Complex) = 0:d0dcc1da3c694cf9a7e924c7832d1528
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Filename) = 0:3817bec1dad20c6f594d3a85b13020b8
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(List) = 0:8988208489274193e4e3f69dc6ec2f75
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Pervasives) = 0:0d015a5a2136659b0de431be7f1545be
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Printf) = 0:eb49a17645c5ea2dd298430a3c986186
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(String) = 0:9cb286f2c4569fd32c379b1a05c7b590
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(Unix) = 0:30a4cc8e5f4f902ea609c91caec48af7
ocaml-plplot-5.11.1-5.fc25.x86_64 requires ocaml(runtime) = 0:4.02.3
[postal]
postal-0.70-15.fc23.x86_64 requires libgnutls.so.28()(64bit)
postal-0.70-15.fc23.x86_64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[pulseaudio]
pulseaudio-9.0-1.fc25.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
[pygrib]
pygrib-2.0.2-2.fc26.x86_64 requires libjasper.so.1()(64bit)
python3-pygrib-2.0.2-2.fc26.x86_64 requires libjasper.so.1()(64bit)
[pysdm]
pysdm-0.4.1-11.fc24.noarch requires beesu
[python-ironicclient]
python3-ironicclient-1.7.0-1.fc26.noarch requires python3-openstackclient >= 0:2.1.0
[python-keystonemiddleware]
python3-keystonemiddleware-4.9.0-1.fc26.noarch requires python3-oslo-context >= 0:2.90
[python-zope-i18n]
python2-zope-i18n-4.1.0-4.fc25.noarch requires python2-zope-schema
[qalculate-kde]
qalculate-kde-0.9.7.10-6.nmu1.fc24.x86_64 requires libqalculate.so.5()(64bit)
[qutim]
qutim-0.3.2-5.git.6f3a98a.fc23.i686 requires libhunspell-1.3.so.0
qutim-0.3.2-5.git.6f3a98a.fc23.x86_64 requires libhunspell-1.3.so.0()(64bit)
[rOCCI-server]
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(rails) < 0:4.3
rOCCI-server-1.1.9-1.fc25.noarch requires rubygem(responders) < 0:2.2
[redland-bindings]
php-redland-1.0.16.1-16.fc25.x86_64 requires php(api) = 0:20131106-64
php-redland-1.0.16.1-16.fc25.x86_64 requires php(zend-abi) = 0:20131226-64
[repsnapper]
repsnapper-2.3.2-0.10.a5.fc25.x86_64 requires libpolyclipping.so.18()(64bit)
[sahana]
sahana-0.6.3-10.fc24.noarch requires php-mysql
[samba]
2:ctdb-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.10)(64bit)
2:ctdb-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:ctdb-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:ctdb-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:ctdb-tests-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:ctdb-tests-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:ctdb-tests-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:ctdb-tests-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.15)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.23)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.1)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_1.1.19)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.5)
2:samba-client-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.3.0)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.23)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_1.1.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_1.1.19)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.5)(64bit)
2:samba-client-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.3.0)(64bit)
2:samba-common-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-common-tools-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-libs-4.5.1-1.fc26.i686 requires libtdb.so.1(TDB_1.2.2)
2:samba-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-libs-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
2:samba-python-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-python-4.5.1-1.fc26.x86_64 requires libpyldb-util.so.1(PYLDB_UTIL_1.1.2)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_1.1.14)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_1.1.25)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_1.1.27)(64bit)
2:samba-test-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.12)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.15)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.19)
2:samba-test-libs-4.5.1-1.fc26.i686 requires libldb.so.1(LDB_0.9.24)
2:samba-test-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
2:samba-test-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.12)(64bit)
2:samba-test-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.15)(64bit)
2:samba-test-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.19)(64bit)
2:samba-test-libs-4.5.1-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.24)(64bit)
2:samba-winbind-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
2:samba-winbind-4.5.1-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.2)(64bit)
[sslogger]
sslogger-0.96-13.fc22.x86_64 requires libgnutls.so.28()(64bit)
sslogger-0.96-13.fc22.x86_64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
sslogger-slogd-0.96-13.fc22.x86_64 requires libgnutls.so.28()(64bit)
sslogger-slogd-0.96-13.fc22.x86_64 requires libgnutls.so.28(GNUTLS_1_4)(64bit)
[sssd]
python2-sss-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
python3-sss-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-ad-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.i686 requires libldb.so.1(LDB_0.9.10)
sssd-common-1.14.2-1.fc26.i686 requires libtdb.so.1(TDB_1.2.1)
sssd-common-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-1.14.2-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-common-pac-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-common-pac-1.14.2-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-dbus-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-dbus-1.14.2-1.fc26.x86_64 requires libtdb.so.1(TDB_1.2.1)(64bit)
sssd-ipa-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
sssd-tools-1.14.2-1.fc26.x86_64 requires libldb.so.1(LDB_0.9.10)(64bit)
[step]
step-16.08.2-1.fc26.x86_64 requires libqalculate.so.5()(64bit)
[syck]
syck-php-0.70-7.20130402.fc24.x86_64 requires php(api) = 0:20131106-64
syck-php-0.70-7.20130402.fc24.x86_64 requires php(zend-abi) = 0:20131226-64
[system-config-kickstart]
system-config-kickstart-2.9.3-3.fc24.noarch requires system-config-date
[tepsonic]
tepsonic-0.98.3-11.fc24.i686 requires qt-mysql
tepsonic-0.98.3-11.fc24.x86_64 requires qt-mysql
[ugene]
ugene-1.25.0-2.fc26.i686 requires qt5-qtbase(x86-32) = 0:5.7.0
ugene-1.25.0-2.fc26.x86_64 requires qt5-qtbase(x86-64) = 0:5.7.0
[wgrib2]
wgrib2-2.0.3-2.fc24.x86_64 requires libjasper.so.1()(64bit)
[zoneminder]
zoneminder-1.28.1-6.fc25.x86_64 requires php-mysql
7 years, 4 months
When to make packeges "dnf protected"
by Rolf Fokkens
Hi all,
As the maintainer of bcache-tools I ran into the situation that a
collegue accidentally removed bcache-tools, resulting in a system that
failed to boot after installing and using a new kernel. dnf logs showed
that the package had been erased, with a bunch of other packages. It
happened 3 weeks ago, and the colleague did not recall what he actually
did at that time.
I'm considering to make bcache-tools protected (by including a config
file in the package in /etc/dnf/protected.d/) to prevent accidental
erasure of the package. Is this the proper way to prevent this situation?
Cheers,
Rolf
7 years, 4 months