3:02 a.m.
I have the yarrow's iso files on my HD in a RH9 system. Let's say I want
to upgrade selected packages using an "apt-get install" pointing to my
iso-mounted files, how do I do it?
i.e I mount the iso into some /mnt/yarrow1, /mnt/yarrow 2 etc..
Then what is the complete procedure to make my apt look into my own HD to
upgrade packages. Can anybody redirect me to the correct
resource or some literature hanging on the web? Thanks.
Assume also that I do not wish to burn CDs! I do not want to use
apt-cdrom. Thanks.
With kind regards,
Didier.
---
PhD student
Singapore Synchrotron Light Source (SSLS)
5 Research Link,
Singapore 117603
Email: slsbdfc at nus dot edu dot sg \or\
didierbe at sps dot nus dot edu dot sg
Website: http://ssls.nus.edu.sg
3:50 a.m.
On Fri, 2003-11-21 at 10:02, Didier Casse wrote:
I have the yarrow's iso files on my HD in a RH9 system. Let's
say I want
to upgrade selected packages using an "apt-get install" pointing to my
iso-mounted files, how do I do it?
i.e I mount the iso into some /mnt/yarrow1, /mnt/yarrow 2 etc..
Then what is the complete procedure to make my apt look into my own HD to
upgrade packages. Can anybody redirect me to the correct
resource or some literature hanging on the web? Thanks.
Assume also that I do not wish to burn CDs! I do not want to use
apt-cdrom. Thanks.
I just updated a RH9 system to FC1 by writing the bootdisk image to a
floppy and directing the installer to the hd partition containing the
iso's. It's working fine now...
I'm not sure, but maybe grub can boot those disk images as well?
--
Klaasjan Brand <kjb(a)dds.nl>
6:02 a.m.
Klaasjan,
Do you have the time to write out a mini-howto on that? I have a
feeling that your instruction can help a few people following in your
footsteps, and who may not have the opportunity to figure out a working
solution by themselves.
Me, I need one that can reliably do it from 5000km away. It'll be
loop-mounted ISOs, apt-get and similar craziness, I think. Or I need to
book a flight. 8-) Either way, I'm not the target audience, but I'm
close. ACME@cl says that CL can do it with just apt-get, and that's
incredibly interesting.
- bish
Klaasjan Brand wrote:
On Fri, 2003-11-21 at 10:02, Didier Casse wrote:
>I have the yarrow's iso files on my HD in a RH9 system. Let's say I want
>to upgrade selected packages using an "apt-get install" pointing to my
>iso-mounted files, how do I do it?
>
>i.e I mount the iso into some /mnt/yarrow1, /mnt/yarrow 2 etc..
>
>Then what is the complete procedure to make my apt look into my own HD to
>upgrade packages. Can anybody redirect me to the correct
>resource or some literature hanging on the web? Thanks.
>
>Assume also that I do not wish to burn CDs! I do not want to use
>apt-cdrom. Thanks.
I just updated a RH9 system to FC1 by writing the bootdisk image to a
floppy and directing the installer to the hd partition containing the
iso's. It's working fine now...
I'm not sure, but maybe grub can boot those disk images as well?
--
"those who torment us for our own good will torment us
without end, for they do so with the approval of their
own conscience."
http://quotes.telemanage.ca/quotes.nsf/quotes/7cfd6e1a41c2c42185256c84005...
6:51 a.m.
On Fri, 21 Nov 2003, bishop wrote:
Klaasjan,
Do you have the time to write out a mini-howto on that? I have a
feeling that your instruction can help a few people following in your
footsteps, and who may not have the opportunity to figure out a working
solution by themselves.
Me, I need one that can reliably do it from 5000km away. It'll be
loop-mounted ISOs, apt-get and similar craziness, I think. Or I need to
book a flight. 8-) Either way, I'm not the target audience, but I'm
close. ACME@cl says that CL can do it with just apt-get, and that's
incredibly interesting.
Ok, since you need a remote upgrade then apt/yum/up2date is needed. For
apt you basically need to create a local repository of the RPMS. Suppose
you have the iso's mounted in /mnt/yarrow1, /mnt/yarrow2 and /mnt/yarrow3,
I'd probably do it somewhat like this (watch out for typos and thinkos, I
wrote this from top of my head so not tested.. ):
mkdir -p /var/tmp/fedora/RPMS.core
cd /var/tmp/fedora/RPMS.core
ln -s /mnt/yarrow1/Fedora/RPMS/* .
ln -s /mnt/yarrow2/Fedora/RPMS/* .
ln -s /mnt/yarrow3/Fedora/RPMS/* .
genbasedir --bloat /var/tmp/fedora
The add that to your sources.list: "file://var/tmp fedora core"
Check that it works (no errors in output) by running "apt-get update"
and then you should be ready to roll:
apt-get install kernel (choose suitable one from the output)
apt-get dist-upgrade
..and there it is, if all goes well. Note that there's a packaging issue
which prevents a fully updated RHL 9 from being updated to FC 1 cleanly:
Latest RH errata has these packages:
perl-CGI 2:1.804-88.3
perl-CPAN 2:1.804-88.3
perl-DB_File 2:1.804-88.3
..and FC1 has this:
[pmatilai@chip]$ rpm -q --obsoletes perl
perl-Digest-MD5
perl-MIME-Base64
perl-libnet
perl-Storable
perl-CGI <= 2:2.81-88
perl-CPAN <= 2:1.61-88
perl-DB_File <= 2:1.804-88
Meaning that those three packages don't get obsoleted by the new perl
package although they should, otherwise there are file conflicts. To get
around that do "rpm -e perl-CGI perl-CPAN perl-DB_File" before running
dist-upgrade. Nothing *bad* will happen if you dont remove those first,
you just wont be able to run the upgrade before you do.
- Panu -
8:13 a.m.
On Fri, 2003-11-21 at 13:02, bishop wrote:
Klaasjan,
Do you have the time to write out a mini-howto on that? I have a
feeling that your instruction can help a few people following in your
footsteps, and who may not have the opportunity to figure out a working
solution by themselves.
I believe it's already documented in the RH installation guide. IMO it's
not that hard to do: just use the boot floppy and select "hard drive"
when asked for installation source. After that you can select a
partition and enter the path where the ISO files are.
Me, I need one that can reliably do it from 5000km away. It'll
be
loop-mounted ISOs, apt-get and similar craziness, I think. Or I need to
book a flight. 8-) Either way, I'm not the target audience, but I'm
close. ACME@cl says that CL can do it with just apt-get, and that's
incredibly interesting.
Creating your own repository is documented all over the net:
http://www.dragonsdawn.net/~gordon/red-hat-apt-repository-howto/
--
Klaasjan Brand <kjb(a)dds.nl>
9:58 p.m.
On 21/11/03, at 14:51 +0200, Panu Matilainen <pmatilai(a)welho.com> babbled:
Ok, since you need a remote upgrade then apt/yum/up2date is needed.
For
apt you basically need to create a local repository of the RPMS. Suppose
you have the iso's mounted in /mnt/yarrow1, /mnt/yarrow2 and /mnt/yarrow3,
I'd probably do it somewhat like this (watch out for typos and thinkos, I
wrote this from top of my head so not tested.. ):
mkdir -p /var/tmp/fedora/RPMS.core
cd /var/tmp/fedora/RPMS.core
ln -s /mnt/yarrow1/Fedora/RPMS/* .
ln -s /mnt/yarrow2/Fedora/RPMS/* .
ln -s /mnt/yarrow3/Fedora/RPMS/* .
genbasedir --bloat /var/tmp/fedora
The add that to your sources.list: "file://var/tmp fedora core"
Check that it works (no errors in output) by running "apt-get update"
and then you should be ready to roll:
apt-get install kernel (choose suitable one from the output)
apt-get dist-upgrade
This is exactly what I was looking for. Thanks Panu. ;-p
With kind regards,
Didier.
---
PhD student
Singapore Synchrotron Light Source (SSLS)
5 Research Link,
Singapore 117603
Email: slsbdfc at nus dot edu dot sg \or\
didierbe at sps dot nus dot edu dot sg
Website: http://ssls.nus.edu.sg
10:03 p.m.
On 21/11/03, at 15:13 +0100, Klaasjan Brand <kjb(a)dds.nl> babbled:
Creating your own repository is documented all over the net:
http://www.dragonsdawn.net/~gordon/red-hat-apt-repository-howto/
Close to it. This is the formal type usable by others. I wanted to create
a more private one to upgrade specific packages in my distro. This
gives some insights but Paul's reply is to the point. Thanks for
the help Klaasjan.
With kind regards,
Didier.
---
PhD student
Singapore Synchrotron Light Source (SSLS)
5 Research Link,
Singapore 117603
Email: slsbdfc at nus dot edu dot sg \or\
didierbe at sps dot nus dot edu dot sg
Website: http://ssls.nus.edu.sg
12:59 a.m.
On 21/11/03, at 14:51 +0200, Panu Matilainen <pmatilai(a)welho.com> babbled:
On Fri, 21 Nov 2003, bishop wrote:
> Klaasjan,
>
> Do you have the time to write out a mini-howto on that? I have a
> feeling that your instruction can help a few people following in your
> footsteps, and who may not have the opportunity to figure out a working
> solution by themselves.
>
> Me, I need one that can reliably do it from 5000km away. It'll be
> loop-mounted ISOs, apt-get and similar craziness, I think. Or I need to
> book a flight. 8-) Either way, I'm not the target audience, but I'm
> close. ACME@cl says that CL can do it with just apt-get, and that's
> incredibly interesting.
Ok, since you need a remote upgrade then apt/yum/up2date is needed. For
apt you basically need to create a local repository of the RPMS. Suppose
you have the iso's mounted in /mnt/yarrow1, /mnt/yarrow2 and /mnt/yarrow3,
I'd probably do it somewhat like this (watch out for typos and thinkos, I
wrote this from top of my head so not tested.. ):
mkdir -p /var/tmp/fedora/RPMS.core
cd /var/tmp/fedora/RPMS.core
ln -s /mnt/yarrow1/Fedora/RPMS/* .
ln -s /mnt/yarrow2/Fedora/RPMS/* .
ln -s /mnt/yarrow3/Fedora/RPMS/* .
genbasedir --bloat /var/tmp/fedora
The add that to your sources.list: "file://var/tmp fedora core"
Must be a
typo error from you. I think that the correct expression is:
-----------------------------
rpm file:/var/tmp fedora core
-----------------------------
With kind regards,
Didier
---
PhD student
Singapore Synchrotron Light Source (SSLS)
5 Research Link,
Singapore 117603
Email: slsbdfc at nus dot edu dot sg \or\
didierbe at sps dot nus dot edu dot sg
Website: http://ssls.nus.edu.sg
3:43 a.m.
New subject: bug and new package
Hi,
Last year I submitted a bug through bugzilla.redhat.com, which affects
recode-3.6-9 in Fedore Core 1. A recommended patch is also attached. It
has still a status NEW, so it seems for
me nothing happened until now. Is it possible to make the bug handling
process faster? The package, I would like to submit, requires recode.
New packages: I'm a bit confused now how to contribute new packages.
On fedora.us I can read, it will be merged with fedora.redhat and the
package naming guideline applies only to fedora.us. On fedora.redhat
there are information about a future Extra, Alternative ... repository
structure and a modified package naming concept (latter is in the mailing
list)... What to do then? Is it better to wait for finishing the merging,
or to submit to fedora.us?
Zoli
824
days inactive
7456
days old
9 comments
6 participants
participants (6)
-
bishop -
Didier Casse -
Klaasjan Brand -
Michel Alexandre Salim -
Panu Matilainen -
Zoltan Kota