9:59 a.m.
I have a machine with an i815 graphics device on the motherboard. When I do a
regular CD install the GUI works fine. When I boot with "linux askmethod"
with FC3T3 and select NFS install then at the time it goes to graphics mode
the machine locks up.
What are the differences between CD-ROM and NFS install modes in terms of
graphics?
--
http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/ Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/ My home page
11:38 a.m.
On Tue, 2004-10-26 at 00:59 +1000, Russell Coker wrote:
I have a machine with an i815 graphics device on the motherboard.
When I do a
regular CD install the GUI works fine. When I boot with "linux askmethod"
with FC3T3 and select NFS install then at the time it goes to graphics mode
the machine locks up.
What are the differences between CD-ROM and NFS install modes in terms of
graphics?
I'm not sure if this helps, but I just completed a network install on my
Sony VAIO laptop with an i815 graphics card. Since I can't boot off the
CD-ROM drive with the newer (post FC2) non-floppy-emulated iso's, I had
to PXE boot the installer and so didn't actually do the graphical
install. However, after the install was finished I noted that the
graphics in X were . . . weird. Things didn't update properly and other
weirdness. (Pull down the menus, have the desktop icons disappear,
widgets don't appear until you mouse-over them, etc.) There is a bug in
bugzilla related to i815 cards crashing that may have something to do
with your problem. It is marked as fixed in the latest FC3 xorg
releases, however, so maybe not.
--
http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/ Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/ My home page
--
Shahms E. King <shahms(a)shahms.com>
Multnomah ESD
Public Key:
http://shahms.mesd.k12.or.us/~sking/shahms.asc
Fingerprint:
1612 054B CE92 8770 F1EA AB1B FEAB 3636 45B2 D75B
8 a.m.
On Tue, 26 Oct 2004 00:59, Russell Coker <russell(a)coker.com.au> wrote:
I have a machine with an i815 graphics device on the motherboard.
When I
do a regular CD install the GUI works fine. When I boot with "linux
askmethod" with FC3T3 and select NFS install then at the time it goes to
graphics mode the machine locks up.
It turns out that I was incorrect in this.
The problem is intermittent, I can't determine what triggers it. It occurs
most of the time on my machines that have Intel 815 graphics, both an IBM
P3-800 desktop and a HP P3-800 desktop.
When it occurs the X server starts, the X cross cursor is briefly displayed
along with the mouse cursor that is normally used by Anaconda (two cursors,
but only the X cross cursor moves) and the Fedora welcome screen is displayed
with lots of what looks like static covering it (seems that it's the graphics
content from the boot loader which was still in the video memory). After
about 1 second of that the screen goes to all vertical stripes of different
colors and the system locks up solidly enough that the caps-lock key does not
change the state of the caps-lock LED.
--
http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/ Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/ My home page
2:57 p.m.
On Wed, 2004-10-27 at 23:00 +1000, Russell Coker wrote:
[snip]
When it occurs the X server starts, the X cross cursor is briefly
displayed
along with the mouse cursor that is normally used by Anaconda (two cursors,
but only the X cross cursor moves) and the Fedora welcome screen is displayed
with lots of what looks like static covering it (seems that it's the graphics
content from the boot loader which was still in the video memory). After
about 1 second of that the screen goes to all vertical stripes of different
colors and the system locks up solidly enough that the caps-lock key does not
change the state of the caps-lock LED.
I saw the same problem. I couldn't get reliably burned CD-RWs (old
ones that need replacing), so I tried an NFS/ISO install on a Compaq
IPaq P3 1GHz box with an i815 integrated graphics controller. And
xscreensaver seems to kill the graphics unrecoverably (X seems to crash,
and there are some vertical lines on the left portion of the screen),
but I can at least hit the power button and it shutdown gracefully.
I'm also still seeing the refresh screen problem described in
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=132267 when not
using the two XaaNo* workarounds listed there.
Using FC3T3 with updates.
--
-Paul Iadonisi
Senior System Administrator
Red Hat Certified Engineer / Local Linux Lobbyist
Ever see a penguin fly? -- Try Linux.
GPL all the way: Sell services, don't lease secrets
7116
days inactive
7120
days old
3 comments
3 participants
participants (3)
-
Paul Iadonisi -
Russell Coker -
Shahms King