Jiri,
There is no /var/log/firewalld file.
This is my config file:
# firewalld config file
# default zone # The default zone used if an empty zone string is used. # Default: public DefaultZone=home
# Minimal mark # Marks up to this minimum are free for use for example in the direct # interface. If more free marks are needed, increase the minimum # Default: 100 MinimalMark=100
# Clean up on exit # If set to no or false the firewall configuration will not get cleaned up # on exit or stop of firewalld # Default: yes CleanupOnExit=yes
# Lockdown # If set to enabled, firewall changes with the D-Bus interface will be limited # to applications that are listed in the lockdown whitelist. # The lockdown whitelist file is lockdown-whitelist.xml # Default: no Lockdown=no
# IPv6_rpfilter # Performs a reverse path filter test on a packet for IPv6. If a reply to the # packet would be sent via the same interface that the packet arrived on, the # packet will match and be accepted, otherwise dropped. # The rp_filter for IPv4 is controlled using sysctl. # Default: yes IPv6_rpfilter=yes
Thanks, John
On 07/16/2014 12:56 PM, Jiri Popelka wrote:
On 07/16/2014 04:18 PM, John Griffiths wrote:
When I open firewall-config, there is nothing under the Direct tab.
Can you check /var/log/firewalld for any WARNINGs/ERRORs ?
-- Jiri