February 2021 - FreeIPA-users - Fedora mailing-lists

kinit: KDC can't fulfill requested option while renewing credentials - which approach?
by Pieter Baele 20 Sep '23

20 Sep '23

I tried various approached to get Renewable tickets : modifying the kdc modifying krb5.conf using kadmin.local on every replica to modify the principal; which is not working - as designed (?)- in IPA What should I do to get a ticket with the correct R flag from IPA ? I don't think this is SSSD related (the service needing the renewable ticket this way is Apache Storm) Thanks a lot!

3 4

Do keytabs expire?
by Ronald Wimmer 07 Jun '23

07 Jun '23

Hi, today I found out that some entries in a keytab file seemed to have expired: Request ticket server HTTP/mwc.linux.mydomain.at(a)LINUX.MYDOMAIN.AT kvno 4 not found in keytab; keytab is likely out of date Fetching the keytab again with ipa-getkeytab fixed the problem. But why is this happening? Do keytab entries expire? I have not set any custom password or ticket policies. Regards, Ronald

4 13

ipa-replica-install fails when I use custom certificates
by Peter Tselios 09 Feb '23

09 Feb '23

I have installed the ipa server by using the following command: --------- ipa-server-install --realm "EXAMPLE.COM" -p 'password' -a 'password' --hostname="server.example.com" -n example.com --ip-address="10.1.4.2" --dirsrv-cert-file=/etc/pki/tls/private/example.com.pem --dirsrv-cert-file=/etc/pki/tls/certs/example.com.crt --dirsrv-pin='' --http-cert-file=/etc/pki/tls/certs/example.com.crt --http-cert-file=/etc/pki/tls/private/example.com.pem --http-pin='' --ca-cert-file=/etc/pki/ca-trust/source/anchors/myca.pem --ca-cert-file=/etc/pki/ca-trust/source/anchors/mysubca.pem --mkhomedir -N --no-host-dns --unattended --------- Which works perfectly fine. However, I cannot make it work with ipa-replica-install since there is no option for --ca-cert-file. So, how can I install a replica with custom certificates?

6 12

FreeIPA CA failing to login with new admin user
by Stasiek Michalski 19 Dec '22

19 Dec '22

Hello, I installed FreeIPA replica on 4.8.4 on CentOS 8 from 4.4.4 from Fedora 25 with `ipa-replica-install --setup-dns --auto-forwarders`, without `--setup-ca` due to errors, which went fine. I do want to install CA though, which failed when I did `--setup-ca` and then later `ipa-ca-install` with the following error: ``` [4/29]: creating installation admin user Unable to log in as uid=admin-freeipa2.infra.opensuse.org,ou=people,o=ipaca on ldap://freeipa.infra.opensuse.org:389 [hint] tune with replication_wait_timeout [error] NotFound: uid=admin-freeipa2.infra.opensuse.org,ou=people,o=ipaca did not replicate to ldap://freeipa.infra.opensuse.org:389 Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. ``` Obviously I did try try extending the timeout based on that, but I don't think that was helpful in the end, considering the logs produced by the old server: httpd access_log ``` 192.168.47.90 - - [23/Jul/2020:00:25:36 +0000] "GET /ca/rest/account/login HTTP/1.1" 401 994 ``` server process in journal ``` SSLAuthenticatorWithFallback: Authenticating with BASIC authentication Invalid Credential. at com.netscape.cmscore.authentication.PasswdUserDBAuthentication.authenticate(PasswdUserDBAuthentication.java:167) at com.netscape.cms.realm.PKIRealm.authenticate(PKIRealm.java:63) at com.netscape.cms.tomcat.ProxyRealm.authenticate(ProxyRealm.java:78) at org.apache.catalina.authenticator.BasicAuthenticator.authenticate(BasicAuthenticator.java:94) at com.netscape.cms.tomcat.SSLAuthenticatorWithFallback.doSubAuthenticate(SSLAuthenticatorWithFallback.java:37) at com.netscape.cms.tomcat.AbstractPKIAuthenticator.doAuthenticate(AbstractPKIAuthenticator.java:98) at com.netscape.cms.tomcat.SSLAuthenticatorWithFallback.authenticate(SSLAuthenticatorWithFallback.java:47) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:579) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:141) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:79) at org.apache.catalina.valves.AbstractAccessLogValve.invoke(AbstractAccessLogValve.java:620) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:88) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:502) at org.apache.coyote.ajp.AbstractAjpProcessor.process(AbstractAjpProcessor.java:877) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:684) at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1539) at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:1495) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.lang.Thread.run(Thread.java:748) SSLAuthenticatorWithFallback: Fallback auth header: WWW-Authenticate=Basic realm="Certificate Authority" SSLAuthenticatorWithFallback: Fallback auth return code: 401 SSLAuthenticatorWithFallback: Result: false ``` and from pki logs ``` Failed to authenticate as admin UID=admin-freeipa2.infra.opensuse.org. Error: netscape.ldap.LDAPException: error result (49) ``` I don't particularly know how to proceed from here, since those errors don't mean much to me. I see however it's not just me having issues with `ipa-ca-install` at least similar to this one (although by the looks of it, the reason is already different ;) Thanks in advance for trying, LCP [Stasiek] https://lcp.world/

4 6

IPA-Error 903: InternalError on Certificate page
by Nico Maas 10 Nov '22

10 Nov '22

Dear all, I am using FreeIPA, Version: 4.8.4 on CentOS 8 ipa-client.x86_64 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream ipa-client-common.noarch 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream ipa-common.noarch 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream ipa-healthcheck-core.noarch 0.4-4.module_el8.2.0+374+0d2d74a1 @AppStream ipa-server.x86_64 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream ipa-server-common.noarch 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream ipa-server-dns.noarch 4.8.4-7.module_el8.2.0+374+0d2d74a1 @AppStream Whenever I open the "Authentication" tab in the freeIPA webserver, I get the error "IPA-Error 903: InternalError. An internal error has happend". Retry does not help, within Authentication I can use all tabs, except from the Authentication -> Certificate -> Certificate one. This one gives the error. I can also not search for a certificate. The other areas of Authentication -> Certificate (Certificate Profiles, CA ACLS, Certificate Authorities) work without problems. As a test I cloned the machine and updated it to the latest CentOS 8 version with a newer freeIPA version on it, but that did not solve the problem and I scrapped this vm and idea again. Any idea on how to resolve the issue / what could be broken? Which logs and things would be useful to look into? Thanks a lot for your help and have a nice day Nico

4 8

Problem running IPA client on IPv6 only connection
by William Muriithi 26 Jul '22

26 Jul '22

Hello, I have an IPA clients that has both IPv4 and IPv6 addresses. One of the IPA client is in the office and hence can reach the IPA server on both IPv4 and IPv6. However, the client outside the LAN can only reach the IPA server over IPv6. I was able to enroll the external client fine over IPv6 and from the logs, all clean. However, when I attempted to ssh, its not able to retreave the user from IPA. The client in the office works fine. I can also make for example LDAP queries and they work over IPv6 fine. It looks like kerberos is somehow however using IPv4. I reached this conclusion after taking a tcpdump when attempting to ssh to the server and the kerberos traffic from the client to IPA is on IPv4. What would I need to do on the IPA client for it to prefer IPv6? I am aware I could remove IPv4 address from DNS, but that would break any communication from IPv4 only systems. Any assistance would be appreaciated. [william@ansible ~]$ ssh root(a)mars.external.example.com Last login: Mon Jan 7 17:19:49 2019 from 65.98.193.94 [root@mars ~]# kinit admin kinit: Cannot contact any KDC for realm 'EXTERNAL.EXAMPLE.COM <http://external.example.com/>' while getting initial credentials [root@mars ~]# ldapsearch -x -b cn=ftp,cn=groups,cn=compat,dc=external,dc=example,dc=com | tail -n 4 result: 0 Success # numResponses: 2 # numEntries: 1 [root@mars ~]# cat /etc/resolv.conf search external.example.com nameserver 2607:4860:6000:a::5 [root@mars ~]# Regards, William

5 10

ssh key issues
by Andrew Meyer 21 Jul '22

21 Jul '22

I recently cleaned up a few server in my home lab. Deleted servers that I no longer needed. However It seems I have a server with an IP address that used previously. FreeIPA is reporting that it is in /var/lib/sss/pubconf/known_hosts but I can't reverse engineer the hostname by doing sshkey -R 1.2.3.4. I have run into this issue previously but it has bee quite some time. When I go to delete the line from /var/lib/sss/pubconf/known_hosts it is gone. If someone could help me that would be great. I didn't see anything on my FreeIPA master that indicated I did anything there.

5 12

Could not login with AD user
by Ronald Wimmer 20 Jul '22

20 Jul '22

Today I was not able to log in with an AD user to an IPA client within a test setup. IPA users worked fine. DNS is managed externally. I figured out that the DNS-Record of that particular IPA client has not been created correctly. After having corrected the DNS entry and having dropped the SSSD cache on that client I could login with my AD user. Do you have an explanation for that or was it just a coincidence? Cheers, Ronald

4 13

freeipa/certmonger for openvpn user certificates
by Patrick Spinler 28 Jun '22

28 Jun '22

Hi, I'm setting up an openvpn server and I'd like to use our already existing FreeIPA CA to issue user keys/certs for openvpn's use. Since our OpenVPN box is a freeipa client, I thought it'd be nice to use certmonger to issue and keep up to date these certs. Ergo, I've created a certificate profile: pat@apex-freeipa ~$ ipa certprofile-show --all OpenVPNUserCert dn: cn=OpenVPNUserCert,cn=certprofiles,cn=ca,dc=int,dc=apexmw,dc=com Profile ID: OpenVPNUserCert Profile description: OpenVPN User Certificates Store issued certificates: FALSE objectclass: ipacertprofile, top And also a CA acl. For experimentation (and working vs our test freeipa) I've left this as wide open as I can: [pat@apex-freeipa ~]$ ipa caacl-show --all OpenVPN_User_Certificate_ACL dn: ipaUniqueID=6dde33a6-7849-11e9-aa05-525400b52c7b,cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com ACL name: OpenVPN_User_Certificate_ACL Enabled: TRUE CA category: all Profile category: all User category: all Host category: all Service category: all ipauniqueid: 6dde33a6-7849-11e9-aa05-525400b52c7b objectclass: ipaassociation, ipacaacl Then, on my openvpn server, I ask for a cert for use for one of my users (myself, in this case): root@apex-openvpn:~# ipa-getcert request -f /etc/openvpn/client/pat.crt -k /etc/openvpn/client/pat.key -r -N 'CN=pat,O=INT.APEXMW.COM' -K pat -g 4096 --profile OpenVPNUserCert New signing request "20190603014016" added. But, it fails due to an access err vs the 'userCertificate' attribute of my account: root@apex-openvpn:~# ipa-getcert list (...snippy snip excess...) Request ID '20190603014016': status: CA_REJECTED ca-error: Server at https://apex-freeipa.int.apexmw.com/ipa/xml denied our request, giving up: 2100 (RPC failed at server. Insufficient access: Insufficient 'write' privilege to the 'userCertificate' attribute of entry 'uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com'.). stuck: yes key pair storage: type=FILE,location='/etc/openvpn/client/pat.key' certificate: type=FILE,location='/etc/openvpn/client/pat.crt' CA: IPA issuer: subject: expires: unknown pre-save command: post-save command: track: yes auto-renew: yes If I look at the dirsrv log, here's the accesses I see for this request (trimmed off the date/time to make the lines a _little_ shorter): root@apex-freeipa slapd-INT-APEXMW-COM# grep conn=178 access | cut -d' ' -f3- conn=178 fd=114 slot=114 connection from 10.10.200.1 to 10.10.200.1 conn=178 op=0 BIND dn="" method=sasl version=3 mech=GSS-SPNEGO conn=178 op=0 RESULT err=0 tag=97 nentries=0 etime=0.0025554208 dn="fqdn=apex-openvpn.int.apexmw.com,cn=computers,cn=accounts,dc=int,dc=apexmw,dc=com" conn=178 op=1 SRCH base="cn=ipaconfig,cn=etc,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs=ALL conn=178 op=1 RESULT err=0 tag=101 nentries=1 etime=0.0001319554 conn=178 op=2 SRCH base="cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(cn=CA))" attrs=ALL conn=178 op=2 RESULT err=0 tag=101 nentries=1 etime=0.0000979573 conn=178 op=3 SRCH base="cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(cn=CA))" attrs=ALL conn=178 op=3 RESULT err=0 tag=101 nentries=1 etime=0.0000736730 conn=178 op=4 SRCH base="cn=cas,cn=ca,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaca)(cn=ipa))" attrs="" conn=178 op=4 RESULT err=0 tag=101 nentries=1 etime=0.0000499142 conn=178 op=5 SRCH base="cn=ipa,cn=cas,cn=ca,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="ipaCaId ipaCaSubjectDN cn ipaCaIssuerDN description" conn=178 op=5 RESULT err=0 tag=101 nentries=1 etime=0.0000482726 conn=178 op=6 SRCH base="cn=apex-freeipa.int.apexmw.com,cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(ipaConfigString=enabledService)(cn=CA))" attrs=ALL conn=178 op=6 RESULT err=0 tag=101 nentries=1 etime=0.0000950646 notes=U conn=178 op=7 SRCH base="cn=accounts,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=krbprincipalaux)(krbPrincipalName=pat(a)INT.APEXMW.COM))" attrs=ALL conn=178 op=7 RESULT err=0 tag=101 nentries=1 etime=0.0002747849 conn=178 op=8 EXT oid="1.3.6.1.4.1.4203.1.11.3" name="whoami-plugin" conn=178 op=8 RESULT err=0 tag=120 nentries=0 etime=0.0000135034 conn=178 op=9 SRCH base="cn=request certificate ignore caacl,cn=virtual operations,cn=etc,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="objectClass" conn=178 op=9 RESULT err=0 tag=101 nentries=1 etime=0.0000932668 - entryLevelRights: none conn=178 op=10 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="distinguishedName" conn=178 op=10 RESULT err=0 tag=101 nentries=1 etime=0.0000640289 conn=178 op=11 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="telephoneNumber ipaSshPubKey uid krbCanonicalName ipatokenRadiusUserName ipaUserAuthType krbPrincipalExpiration homeDirectory nsAccountLock usercertificate;binary title loginShell uidNumber mail ipaCertMapData memberOf memberofindirect krbPrincipalName givenName gidNumber sn ou userClass ipatokenRadiusConfigLink" conn=178 op=11 RESULT err=0 tag=101 nentries=1 etime=0.0001401737 conn=178 op=12 SRCH base="dc=int,dc=apexmw,dc=com" scope=2 filter="(|(member=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com)(memberUser=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com)(memberHost=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com))" attrs="" conn=178 op=12 RESULT err=0 tag=101 nentries=7 etime=0.0001492344 notes=P pr_idx=0 pr_cookie=-1 conn=178 op=13 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(userPassword=*)" attrs="userPassword" conn=178 op=13 RESULT err=0 tag=101 nentries=1 etime=0.0000524838 conn=178 op=14 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(krbPrincipalKey=*)" attrs="krbPrincipalKey" conn=178 op=14 RESULT err=0 tag=101 nentries=1 etime=0.0000597589 conn=178 op=15 SRCH base="ipaUniqueID=80b23b30-6a0c-11e9-baa3-525400b52c7b,cn=sudorules,cn=sudo,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="cn" conn=178 op=15 RESULT err=0 tag=101 nentries=1 etime=0.0000379744 conn=178 op=16 SRCH base="ipaUniqueID=5fb3a640-705a-11e9-aa05-525400b52c7b,cn=hbac,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="cn" conn=178 op=16 RESULT err=0 tag=101 nentries=1 etime=0.0000337904 conn=178 op=17 SRCH base="cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com" scope=1 filter="(&(objectClass=ipaassociation)(objectClass=ipacaacl))" attrs="serviceCategory cn ipaMemberCertProfile ipaMemberCa ipaCertProfileCategory memberUser userCategory hostCategory memberHost ipaEnabledFlag ipaCaCategory memberService description" conn=178 op=17 RESULT err=0 tag=101 nentries=2 etime=0.0001647058 conn=178 op=18 EXT oid="1.3.6.1.4.1.4203.1.11.3" name="whoami-plugin" conn=178 op=18 RESULT err=0 tag=120 nentries=0 etime=0.0000138321 conn=178 op=19 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="userCertificate" conn=178 op=19 RESULT err=0 tag=101 nentries=1 etime=0.0001475052 - entryLevelRights: none conn=178 op=20 UNBIND conn=178 op=20 fd=114 closed - U1 To begin with, I note that this session does a BIND with 'dn=""', right at the beginning, it's essentially an anonymous bind, yah? That operation near the end, here: op=17 SRCH base="cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com" scope=1 filter="(&(objectClass=ipaassociation)(objectClass=ipacaacl))" seems like it might be kinda key. and indeed, if I attempt to run this by hand as an anonymous bind, I get no results: root@apex-freeipa slapd-INT-APEXMW-COM# ldapsearch -x -h localhost -b dc=int,dc=apexmw,dc=com -s sub "(|(objectClass=ipaassociation)(objectClass=ipacaacl))" # extended LDIF # # LDAPv3 # base <dc=int,dc=apexmw,dc=com> with scope subtree # filter: (|(objectClass=ipaassociation)(objectClass=ipacaacl)) # requesting: ALL # # search result search: 2 result: 0 Success # numResponses: 1 It's only if I run this as an _authenticated_ bind, that I can find my ACL: root@apex-freeipa slapd-INT-APEXMW-COM# ldapsearch -x -D "cn=Directory Manager" -W -h localhost -b dc=int,dc=apexmw,dc=com -s sub "(&(objectClass=ipaassociation)(objectClass=ipacaacl))" cn Enter LDAP Password: # extended LDIF # # LDAPv3 # base <dc=int,dc=apexmw,dc=com> with scope subtree # filter: (&(objectClass=ipaassociation)(objectClass=ipacaacl)) # requesting: cn # # c98b740c-6903-11e9-ad1b-525400b52c7b, caacls, ca, int.apexmw.com dn: ipaUniqueID=c98b740c-6903-11e9-ad1b-525400b52c7b,cn=caacls,cn=ca,dc=int,dc =apexmw,dc=com cn: hosts_services_caIPAserviceCert # 6dde33a6-7849-11e9-aa05-525400b52c7b, caacls, ca, int.apexmw.com dn: ipaUniqueID=6dde33a6-7849-11e9-aa05-525400b52c7b,cn=caacls,cn=ca,dc=int,dc =apexmw,dc=com cn: OpenVPN_User_Certificate_ACL # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 Is this (using certmonger to auto-issue signed certs/keys for my openvpn users) going to be essentially impossible to do, here? Do I need to go a more traditional route of creating a seperate keystore/certdb, issuing a CSR, and feeding that to FreeIPA to sign? Any advice appreciated, and thanks in advance, -- Pat

4 6

Broken ipa replica
by Giulio Casella 09 May '22

09 May '22

Hi everyone, I'm stuck with a broken replica. I had a setup with two ipa server in replica (ipa-server-4.6.4 on CentOS 7.6), let's say "idc01" and "idc02". Due to heavy load idc01 crashed many times, and was not working anymore. So I tried to redo the replica again. At first I tried to "ipa-replica-manage re-initialize", with no success. Now I'm trying to redo from scratch the replica setup: on idc02 I removed the segments (ipa topologysegment-del, for both ca and domain suffix), on idc01 I removed everything (ipa-server-install --uninstall), then I joined domain (ipa-client-install), and everything is working so far. When doing "ipa-replica-install" on idc01 I get: [...] [28/41]: setting up initial replication Starting replication, please wait until this has completed. Update in progress, 22 seconds elapsed [ldap://idc02.my.dom.ain:389] reports: Update failed! Status: [Error (-11) connection error: Unknown connection error (-11) - Total update aborted] And on idc02 (the working server), in /var/log/dirsrv/slapd-MY-DOM-AIN/errors I find lines stating: [20/Mar/2019:09:28:06.545187923 +0100] - INFO - NSMMReplicationPlugin - repl5_tot_run - Beginning total update of replica "agmt="cn=meToidc01.my.dom.ain" (idc01:389)". [20/Mar/2019:09:28:26.528046160 +0100] - ERR - NSMMReplicationPlugin - perform_operation - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Failed to send extended operation: LDAP error -1 (Can't contact LDAP server) [20/Mar/2019:09:28:26.530763939 +0100] - ERR - NSMMReplicationPlugin - repl5_tot_log_operation_failure - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Received error -1 (Can't contact LDAP server): for total update operation [20/Mar/2019:09:28:26.532678072 +0100] - ERR - NSMMReplicationPlugin - release_replica - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Unable to send endReplication extended operation (Can't contact LDAP server) [20/Mar/2019:09:28:26.534307539 +0100] - ERR - NSMMReplicationPlugin - repl5_tot_run - Total update failed for replica "agmt="cn=meToidc01.my.dom.ain" (idc01:389)", error (-11) [20/Mar/2019:09:28:26.561763168 +0100] - INFO - NSMMReplicationPlugin - bind_and_check_pwp - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Replication bind with GSSAPI auth resumed [20/Mar/2019:09:28:26.582389258 +0100] - WARN - NSMMReplicationPlugin - repl5_inc_run - agmt="cn=meToidc01.my.dom.ain" (idc01:389): The remote replica has a different database generation ID than the local database. You may have to reinitialize the remote replica, or the local replica. It seems that idc02 remembers something about the old replica. Any hint? Thank you in advance, Giulio

5 10

2025

2024

2023

2022

2021

2020

2019

2018

2017

FreeIPA-users February 2021