10:14 p.m.
Sorry, I realize this is past the first cycle of testing...
----------------------------------------------------------------------
Reporter:
Martin J. Hsu
Product and version number:
FC1
Desktop environment and version number:
Gnome 2.4
libgnome-2.4.0-1
gtk2-2.2.4-5.1
Short description of observation:
It doesn't work (see additional info. section for details)
Version-Release number of selected component (if applicable):
I will do the following:
[install: iiimf-le-xcin 0.1-3.i386]
I will install/upgrade these to satisfy the dependencies:
[deps: iiimf-protocol-lib 1:11.4-1.FC1.2.i386]
[deps: iiimf-client-lib 1:11.4-1.FC1.2.i386]
[deps: iiimf-csconv 1:11.4-1.FC1.2.i386]
[deps: iiimf-server 1:11.4-1.FC1.2.i386]
Is this ok [y/N]: y
How reproducible:
consistent
Steps to Reproduce:
1. open new gnome-terminal
2. LANG=zh_TW.UTF-8 GTK_IM_MODULE=iiim gedit
3. press ctrl-space
(no input box appears in response)
Additional info:
observations:
out of the box config: permission denied to talk to port 9010
xcin (frontend?) doesn't seem to try to talk to port 9010 (should
it?)
installation (actions):
yum install iiimf-le-xcin
service IIim restart
add dependencies installed without error
IIim is up and running as verified by service IIim status
installation (state):
pristine /etc/hosts.{deny,allow} - empty
iptables is off (services iptables stop, turned off via chkconfig as
well)
system default: LANG=en_US.UTF-8
htt_server is bound to port 9010 (checked via lsof)
xcin appears to installed:
-rw-r--r-- 1 root root 88463 Feb 17 11:37
/usr/lib/im/leif/xcin.so
but the conf is empty:
[root@tpemdc01 SPECS]# cat /usr/lib/im/locale/zh_TW/xcin/xcin.conf
#conf file
$XMODIFIERS is unset
htt blocked the connection (tested via telnet localhost 9010)
htt_server[12527]: Denied the access from tpemdc01
I resolved this. This error no longer appears in
/var/log/messages
/var/log/messages reveals nothing outside of start up and shutdown
post installation hacking:
resolved permissions problem by adding my hostname to the
permit list in /usr/lib/im/htt.conf:
AccessControl permit tpemdc01
----------------------------------------------------------------------
--
Martin J. Hsu
hsum(at)ematters.com.tw
12:40 p.m.
On Fri, 5 Mar 2004, Martin J. Hsu wrote:
Sorry, I realize this is past the first cycle of testing...
No problem at all. Thanks for your detail input.
post installation hacking:
resolved permissions problem by adding my hostname to the
permit list in /usr/lib/im/htt.conf:
AccessControl permit tpemdc01
Does it helps (can you connect to htt server ie. thru telnet now)?
Leon
6:55 p.m.
> post installation hacking:
>
> resolved permissions problem by adding my hostname to the
> permit list in /usr/lib/im/htt.conf:
> AccessControl permit tpemdc01
Does it helps (can you connect to htt server ie. thru telnet now)?
Leon
I can telnet localhost 9010 and something (htt?) is doing a blocking
read.
--
Martin J. Hsu
hsum(at)ematters.com.tw
12:37 a.m.
New subject: Fw: Re: [Fedora-i18n-list] iiimf-le-xcin non-success
Hi all,
I was wondering if anyone had any thoughts on this. Or maybe
a post-installation check list?
I've tried installing this on 2 other machines with the
same exact results - it didn't work. I'm wondering if anyone,
outside the developers, has successfully installed iiimf-le-xcin
thanks.
---------- Forwarded Message -----------
From: "Martin J. Hsu" <hsum ematters.com.tw>
Subject: Re: [Fedora-i18n-list] iiimf-le-xcin non-success
> post installation hacking:
>
> resolved permissions problem by adding my hostname to the
> permit list in /usr/lib/im/htt.conf:
> AccessControl permit tpemdc01
Does it helps (can you connect to htt server ie. thru telnet now)?
Leon
I can telnet localhost 9010 and something (htt?) is doing a blocking
read.
--
Martin J. Hsu
hsum(at)ematters.com.tw
------- End of Forwarded Message -------
--
Martin J. Hsu
hsum(at)ematters.com.tw
1:29 a.m.
New subject: Fw: Re: [Fedora-i18n-list] iiimf-le-xcin non-success
Hi Martin,
Maybe you can try editing the followings files (htt.conf and host.allow).
In htt.conf, add the following lines:
AccessControl permit localhost
ListenAddress: localhost:9010
In host.allow, add the following line:
htt_server: localhost
Hopefully this helps.
Lawrence
Martin J. Hsu wrote:
Hi all,
I was wondering if anyone had any thoughts on this. Or maybe
a post-installation check list?
I've tried installing this on 2 other machines with the
same exact results - it didn't work. I'm wondering if anyone,
outside the developers, has successfully installed iiimf-le-xcin
thanks.
---------- Forwarded Message -----------
From: "Martin J. Hsu" <hsum ematters.com.tw>
Subject: Re: [Fedora-i18n-list] iiimf-le-xcin non-success
>> post installation hacking:
>>
>> resolved permissions problem by adding my hostname to the
>> permit list in /usr/lib/im/htt.conf:
>> AccessControl permit tpemdc01
>>
>>
>Does it helps (can you connect to htt server ie. thru telnet now)?
>
>Leon
>
>
I can telnet localhost 9010 and something (htt?) is doing a blocking
read.
--
Martin J. Hsu
hsum(at)ematters.com.tw
------- End of Forwarded Message -------
--
Martin J. Hsu
hsum(at)ematters.com.tw
--
Fedora-i18n-list mailing list
Fedora-i18n-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-i18n-list
11:42 p.m.
New subject: [Fedora-i18n-list] iiimf-le-xcin non-success </pre> <blockquote type="cite"> <blockquote type="cite"> <pre wrap=""> post installation hacking: resolved permissions problem by adding my hostname to the permit list in /usr/lib/im/htt.conf: AccessControl permit tpemdc01 </pre> </blockquote> <pre wrap="">Does it helps (can you connect to htt server ie. thru telnet now)?
Hi Lawrence,
I tried these configuration changes. No improvement.
Pressing ctrl-space does not create an entry box in gedit.
Next, I reinstalled iiim and applied your suggested changes.
iiimf-protocol-lib-11.4-1.FC1.2
iiimf-server-11.4-1.FC1.2
iiimf-csconv-11.4-1.FC1.2
iiimf-client-lib-11.4-1.FC1.2
iiimf-le-xcin-0.1-3
No improvement. In fact, htt_server is no longer binding
to port 9010. I verified this by checking lsof output and
trying to telnet to localhost 9010. I also observed that
htt *appears* to fork htt_server. htt_server keeps dying
(it's pid keeps changing).
Are there any debug flags or environmental variables that
would help us understand what is being called?
Thanks.
Lawrence wrote:
Hi Martin,
Maybe you can try editing the followings files (htt.conf and host.allow).
In htt.conf, add the following lines:
AccessControl permit localhost
ListenAddress: localhost:9010
In host.allow, add the following line:
htt_server: localhost
Hopefully this helps.
Lawrence
--
Martin J. Hsu
hsum(at)ematters.com.tw
12:19 a.m.
New subject: [Fedora-i18n-list] iiimf-le-xcin non-success </pre> <blockquote type="cite"> <blockquote type="cite"> <pre wrap=""> post installation hacking: resolved permissions problem by adding my hostname to the permit list in /usr/lib/im/htt.conf: AccessControl permit tpemdc01 </pre> </blockquote> <pre wrap="">Does it helps (can you connect to htt server ie. thru telnet now)?
I recompiled the rpms from the src.rpms. This stopped htt_server
from dying. Maybe the binary rpms were built on a machine that
doesn't like my machine's libs or something.
Apparently, my machine's name was resolved as tpemdc01 and
not as localhost.
I changed /usr/lib/im/htt.conf accordingly:
AccessControl permit tpemdc01
#AccessControl permit localhost
Port 9010 is now being listened to by htt_server
[root@tpemdc01 i386]# lsof | grep 9010
htt_serve 27646 root 3u IPv4 509278 TCP tpemdc01:9010 (LISTEN)
[root@tpemdc01 i386]# ps -auxww | grep 27646
root 27646 0.0 0.1 4932 1484 ? S 14:11 0:00 htt_server -nodaemon
root 27654 0.0 0.0 5052 588 pts/8 S 14:13 0:00 grep 27646
ctrl-space still doesn't yield an entry box in gedit.
Anyone have any ideas?
reference - just compiled/linked/installed rpms on my machine:
iiimf-csconv-11.4-1.FC1.2
iiimf-client-lib-11.4-1.FC1.2
iiimf-protocol-lib-devel-11.4-1.FC1.2
iiimf-protocol-lib-11.4-1.FC1.2
iiimf-client-lib-devel-11.4-1.FC1.2
iiimf-server-11.4-1.FC1.2
iiimf-le-xcin-0.1-3
thanks.
No improvement. In fact, htt_server is no longer binding
to port 9010. I verified this by checking lsof output and
trying to telnet to localhost 9010. I also observed that
htt *appears* to fork htt_server. htt_server keeps dying
(it's pid keeps changing).
--
Martin J. Hsu
hsum(at)ematters.com.tw
10:01 p.m.
Hi Martin,
Are there any debug flags or environmental variables that
would help us understand what is being called?
Yes, there is a debug flag available.
1) service IIim stop OR kill all htt and htt_server processes
2) Depending where the htt executable is (could be /usr/lib/im/ or
/usr/bin), manually start htt with debug flag by typing
/usr/bin/htt -d
You be able to see the debug message from here.
Does other LE work for you? or it is just xcin that is causing the
problem? Also, if you are using GNOME, did you set the
GTK_IM_MODULE=iiim or if your are KDE, did you use httx?
Thanks,
Lawrence
2:51 a.m.
Hi Lawrence,
I tried this shortly after I got your message and more
extensively today.
Yes, there is a debug flag available.
1) service IIim stop OR kill all htt and htt_server processes
2) Depending where the htt executable is (could be /usr/lib/im/ or
/usr/bin), manually start htt with debug flag by typing
/usr/bin/htt -d
You be able to see the debug message from here.
/usr/lib/im/htt -d
created this process:
htt_server -nodaemon -d
However, nothing came up in at terminal or in /var/log/messages
The gedit test still didn't yield any input. I ran:
LANG=zh_TW.UTF-8 GTK_IM_MODULE=iiim gedit
I'm using Gnome on FC1.
I haven't tried anything other than xcin. Unfortunately,
my time has been a bit limited lately.
Maybe FC2 test2 IIimf works out of the box?
Does other LE work for you? or it is just xcin that is causing the
problem? Also, if you are using GNOME, did you set the
GTK_IM_MODULE=iiim or if your are KDE, did you use httx?
Thanks,
Lawrence
--
Martin J. Hsu
hsum(at)ematters.com.tw
7320
days inactive
7358
days old
8 comments
3 participants
participants (3)
-
Lawrence Lim -
Leon Ho -
Martin J. Hsu