Hi all,
I'm trying to install Fedora IoT 34 on Compulab iot-gate-imx8mm.
The SoC is NXP imx8mm.
However, I always end with something like this.
[ 280.634382] dracut-initqueue[1063]: Warning: dracut-initqueue:
starting timeout scripts
[ 281.328554] dracut-initqueue[1063]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 281.332478] dracut-initqueue[1063]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
"/dev/root" ]"
[ 281.337511] dracut-initqueue[1063]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 281.344330] dracut-initqueue[1063]: Warning: dracut-initqueue:
starting timeout scripts
[ 282.036920] dracut-initqueue[1063]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 282.042238] dracut-initqueue[1063]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
"/dev/root" ]"
[ 282.047276] dracut-initqueue[1063]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 282.054072] dracut-initqueue[1063]: Warning: dracut-initqueue:
starting timeout scripts
[ 282.054958] dracut-initqueue[1063]: Warning: Could not boot.
Starting Dracut Emergency Shell...
Warning: /dev/root does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl"Press Enter for maintenance
(or press Control-D to continue):
I tried to google a bit but didn't find a good solution.
Do you know how to debug this?
My partitioning is on eMMC. It has 2 partitions. One FAT for EFI.
Another is ext4. I can see /dev/mmcblk2p1 /dev/mmcblk2p2 in shell.
The boot log is as pastebin [1]. And the rdsosreport.txt [2]
[1] https://paste.ubuntu.com/p/rw52kQYv98/
[2] https://paste.ubuntu.com/p/cCx25XDXXN/
Yours,
Paul
Yours,
Paul