10:08 a.m.
When I rip a CD I want to add the contents to Amarok's database. It
would appear that the way to do this is by rescanning the entire system.
1) Is this true? Is there no way to simply add the newly-ripped material
without rescanning everything?
2) Even if it is true, it simply doesn't work. I can visit the new
folder via the Files view, and Amarok duly sees it, but on returning to
the Local Music view, nothing. The problem is that I want to add the new
stuff to my media player (a Galaxy Nexus), but the GN is only visible in
the Local Music view, not the Files view, so there's no way to achieve
this. Very frustrating.
<rant>
I used to like Amarok back in the KDE 3 days. I have no wish to return
to KDE 3, but I'm afraid Amarok got too ambitious and buggy. For one
thing, I find the UI really quite hard to understand, so the above
problems might just be PEBKAC.
</rant>
poc
10:47 a.m.
On Wed, 2012-04-25 at 10:38 -0430, Patrick O'Callaghan wrote:
When I rip a CD I want to add the contents to Amarok's database.
It
would appear that the way to do this is by rescanning the entire system.
Apologies for following up to myself, but I neglected to mention that
this is on F16 fully updated with amarok-2.5.0-8.fc16.x86_64.
poc
10:53 a.m.
Have you tried Settings > Configure Amarok > Collection
Check "watch folders for changes"
and
"Scan folders recursively"
That's what I have turned on and everything seems to work ok for me. I have
not tested your exact scenario though, so no guarantees...
-klaatu
On Wed, 2012-04-25 at 10:38 -0430, Patrick O'Callaghan wrote:
> When I rip a CD I want to add the contents to Amarok's database. It
> would appear that the way to do this is by rescanning the entire system.
Apologies for following up to myself, but I neglected to mention that
this is on F16 fully updated with amarok-2.5.0-8.fc16.x86_64.
poc
_______________________________________________
kde mailing list
kde(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/kde
New to KDE4? - get help from http://userbase.kde.org
- klaatu
5:55 p.m.
That does work for me but only after Amarok is restarted.
On 26 April 2012 01:53, Klaatu <klaatu(a)straightedgelinux.com> wrote:
Have you tried Settings > Configure Amarok > Collection
Check "watch folders for changes"
and
"Scan folders recursively"
That's what I have turned on and everything seems to work ok for me. I
have
not tested your exact scenario though, so no guarantees...
-klaatu
> On Wed, 2012-04-25 at 10:38 -0430, Patrick O'Callaghan wrote:
> > When I rip a CD I want to add the contents to Amarok's database. It
> > would appear that the way to do this is by rescanning the entire
system.
>
> Apologies for following up to myself, but I neglected to mention that
> this is on F16 fully updated with amarok-2.5.0-8.fc16.x86_64.
>
> poc
>
> _______________________________________________
> kde mailing list
> kde(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/kde
> New to KDE4? - get help from http://userbase.kde.org
- klaatu
_______________________________________________
kde mailing list
kde(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/kde
New to KDE4? - get help from http://userbase.kde.org
6 p.m.
On Wed, 2012-04-25 at 11:53 -0400, Klaatu wrote:
Have you tried Settings > Configure Amarok > Collection
Check "watch folders for changes"
and
"Scan folders recursively"
[Kindly don't top-post. See the list Guidelines]
Yes, I have both those already checked, to no avail.
I restarted Amarok. Nothing.
I rebooted my system. Nothing.
I went to the Tools menu and did a Full Rescan. Nothing.
Something about this is clearly broken. It may be my setup, but there
are simply no clues. I could of course zero out my config and start
afresh, and I guess I'll have to try try that as a last resort, but at
present my Amarok as installed does not do what it says on the tin.
It might be time to switch to Rhythmbox. After all, I just want a basic
music player that can also send stuff to my phone. I suspect that's what
90% of people also want.
poc
11:20 p.m.
On Wed, 2012-04-25 at 18:30 -0430, Patrick O'Callaghan wrote:
On Wed, 2012-04-25 at 11:53 -0400, Klaatu wrote:
> Have you tried Settings > Configure Amarok > Collection
> Check "watch folders for changes"
> and
> "Scan folders recursively"
[Kindly don't top-post. See the list Guidelines]
Yes, I have both those already checked, to no avail.
I restarted Amarok. Nothing.
I rebooted my system. Nothing.
I went to the Tools menu and did a Full Rescan. Nothing.
Something about this is clearly broken. It may be my setup, but there
are simply no clues. I could of course zero out my config and start
afresh, and I guess I'll have to try try that as a last resort, but at
present my Amarok as installed does not do what it says on the tin.
It might be time to switch to Rhythmbox. After all, I just want a basic
music player that can also send stuff to my phone. I suspect that's what
90% of people also want.
Just for kicks I tried zeroing out my Amarok config, i.e. I
renamed .kde/share/apps/amarok and restarted the app. I then set up the
folders to be scanned, namely a single tree below my Music folder.
The console then filled with hundreds of warnings about kmimetype not
understanding certain file types. The listed files appeared to be every
single file in my account, not just the Music folder (presumably the
latter didn't give errors but frankly I couldn't be bothered checking).
Is there some other local config info that I failed to reset? If not,
I'll just report this to Bugzilla and move on.
poc
11:31 p.m.
There are a number of amarok* files under .kde/share/config/, not sure if
renaming them will fix your issues but worth a try.
On 26 April 2012 14:20, Patrick O'Callaghan <pocallaghan(a)gmail.com> wrote:
On Wed, 2012-04-25 at 18:30 -0430, Patrick O'Callaghan wrote:
> On Wed, 2012-04-25 at 11:53 -0400, Klaatu wrote:
> > Have you tried Settings > Configure Amarok > Collection
> > Check "watch folders for changes"
> > and
> > "Scan folders recursively"
>
> [Kindly don't top-post. See the list Guidelines]
>
> Yes, I have both those already checked, to no avail.
>
> I restarted Amarok. Nothing.
>
> I rebooted my system. Nothing.
>
> I went to the Tools menu and did a Full Rescan. Nothing.
>
> Something about this is clearly broken. It may be my setup, but there
> are simply no clues. I could of course zero out my config and start
> afresh, and I guess I'll have to try try that as a last resort, but at
> present my Amarok as installed does not do what it says on the tin.
>
> It might be time to switch to Rhythmbox. After all, I just want a basic
> music player that can also send stuff to my phone. I suspect that's what
> 90% of people also want.
Just for kicks I tried zeroing out my Amarok config, i.e. I
renamed .kde/share/apps/amarok and restarted the app. I then set up the
folders to be scanned, namely a single tree below my Music folder.
The console then filled with hundreds of warnings about kmimetype not
understanding certain file types. The listed files appeared to be every
single file in my account, not just the Music folder (presumably the
latter didn't give errors but frankly I couldn't be bothered checking).
Is there some other local config info that I failed to reset? If not,
I'll just report this to Bugzilla and move on.
poc
_______________________________________________
kde mailing list
kde(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/kde
New to KDE4? - get help from http://userbase.kde.org
7:28 a.m.
On Thu, 2012-04-26 at 14:31 +1000, Jim Dean wrote:
There are a number of amarok* files under .kde/share/config/, not
sure
if renaming them will fix your issues but worth a try.
[Please check the list Guidelines regarding top-posting]
I tried that, in fact I again moved everything Amarok-related to one
side, logged out and in again, and fired up the app. It asked me where
my music collection was, rescanned it, and *still* doesn't find the new
material I added the other day. Which BTW is simply a CD ripped to MP3,
as are many of my other files which do work.
poc
7:39 a.m.
On 04/26/2012 07:28 AM, Patrick O'Callaghan wrote:
On Thu, 2012-04-26 at 14:31 +1000, Jim Dean wrote:
> There are a number of amarok* files under .kde/share/config/, not sure
> if renaming them will fix your issues but worth a try.
[Please check the list Guidelines regarding top-posting]
I tried that, in fact I again moved everything Amarok-related to one
side, logged out and in again, and fired up the app. It asked me where
my music collection was, rescanned it, and *still* doesn't find the new
material I added the other day. Which BTW is simply a CD ripped to MP3,
as are many of my other files which do work.
One handy related tool in amarok is the commandline
amarokcollectionscanner (see end for usage)
You could try running:
amarokcollectionscanner /path/to/dir/with/ripped_cd/
and see what happens. this tool should be fairly verbose in it's
findings and listing any possible errors or problems it encounters.
-- rex
-------------------------------------------------------
$ amarokcollectionscanner --help
Amarok Collection Scanner
Scans directories and outputs a xml file with the results.
For more information see http://amarok.kde.org/wiki/Batch_Mode
Usage: amarokcollectionscanner [options] <Folder(s)>
User-modifiable Options:
<Folder(s)> : list of folders to scan
-h, --help : This help text
-v, --version : Print the version of this tool
-r, --recursive : Scan folders recursively
-i, --incremental : Incremental scan (modified folders only)
-s, --restart : After a crash, restart the scanner in its last
position
--idlepriority : Run at idle priority
--sharedmemory <key> : A shared memory segment to be used for
restarting a scan
--newer <path> : Only scan directories if modification time is
new than <path>
Only useful in incremental scan mode
--batch <path> : Add the directories from the batch xml file
batch file format should look like this:
<scanner>
<directory>
<path>/absolute/path/of/directory</path>
<mtime>1234</mtime> (this is optional)
</directory>
</scanner>
You can also use a previous scan result for that.
8:13 a.m.
New subject: Updating Amarok's database -- SOLVED
On Thu, 2012-04-26 at 07:39 -0500, Rex Dieter wrote:
On 04/26/2012 07:28 AM, Patrick O'Callaghan wrote:
> On Thu, 2012-04-26 at 14:31 +1000, Jim Dean wrote:
>> There are a number of amarok* files under .kde/share/config/, not sure
>> if renaming them will fix your issues but worth a try.
>
> [Please check the list Guidelines regarding top-posting]
>
> I tried that, in fact I again moved everything Amarok-related to one
> side, logged out and in again, and fired up the app. It asked me where
> my music collection was, rescanned it, and *still* doesn't find the new
> material I added the other day. Which BTW is simply a CD ripped to MP3,
> as are many of my other files which do work.
One handy related tool in amarok is the commandline
amarokcollectionscanner (see end for usage)
You could try running:
amarokcollectionscanner /path/to/dir/with/ripped_cd/
and see what happens. this tool should be fairly verbose in it's
findings and listing any possible errors or problems it encounters.
Thanks Rex, I'll keep that in mind. However I had a brainwave in the
meantime. It turns out the ID3 tags on the new material were incorrect,
so Amarok was showing the files in a different part of the forest.
Amarok is declared innocent until further notice.
But I still think it's too complex and baroque.
Thanks again to all who tried to help, and apologies for the noise.
poc
4380
days inactive
4381
days old
9 comments
4 participants
participants (4)
-
Jim Dean -
Klaatu -
Patrick O'Callaghan -
Rex Dieter