kmod-maint July 2022

kmod-maint@lists.fedoraproject.org

1 participants
4 discussions

[Bug 2024417] New: weak-modules:When the kernel is uninstalled, a message is displayed indicating that the folder cannot be found.
by bugzilla＠redhat.com 25 May '23

25 May '23

https://bugzilla.redhat.com/show_bug.cgi?id=2024417 Bug ID: 2024417 Summary: weak-modules:When the kernel is uninstalled, a message is displayed indicating that the folder cannot be found. Product: Fedora Version: rawhide Status: NEW Component: kmod Assignee: kmod-maint(a)lists.fedoraproject.org Reporter: yangyanchao6(a)huawei.com QA Contact: extras-qa(a)fedoraproject.org CC: jonathan(a)jonmasters.org, kmod-maint(a)lists.fedoraproject.org, skozina(a)redhat.com, ykaliuta(a)redhat.com Target Milestone: --- Classification: Fedora Created attachment 1842466 --> https://bugzilla.redhat.com/attachment.cgi?id=1842466&action=edit Possible patch Description of problem: Check the directory before entering the directory. This prevents alarms from being generated when the kernel is uninstalled. Version-Release number of selected component (if applicable): 29-6.fc36 How reproducible: Steps to Reproduce: 1. 2. 3. Actual results: Expected results: Additional info: -- You are receiving this mail because: You are the assignee for the bug. You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2024417

1 2

[Bug 2024409] New: weak-modules:Changing the sorting mode of rpmsort
by bugzilla＠redhat.com 25 May '23

25 May '23

https://bugzilla.redhat.com/show_bug.cgi?id=2024409 Bug ID: 2024409 Summary: weak-modules:Changing the sorting mode of rpmsort Product: Fedora Version: rawhide Status: NEW Component: kmod Assignee: kmod-maint(a)lists.fedoraproject.org Reporter: yangyanchao6(a)huawei.com QA Contact: extras-qa(a)fedoraproject.org CC: jonathan(a)jonmasters.org, kmod-maint(a)lists.fedoraproject.org, skozina(a)redhat.com, ykaliuta(a)redhat.com Target Milestone: --- Classification: Fedora Created attachment 1842464 --> https://bugzilla.redhat.com/attachment.cgi?id=1842464&action=edit Possible patch Description of problem: When the kernel version number contains a mixture of letters and numbers, the original sorting method has a problem. For example: [root@localhost kmod]# cat test 4.19.90-vhulk2108.6.0.h803 4.19.90-2109.1.0.0108 4.19.90-vhulk2109.1.0.h813 [root@localhost kmod]# ./test.sh + cat test + sed -e s/-/../g + sort -n -t. -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 -k6,6 -k7,7 -k8,8 -k9,9 -k10,10 + sed -e's/\.\./-/g' 4.19.90-vhulk2109.1.0.h813 4.19.90-vhulk2108.6.0.h803 4.19.90-2109.1.0.0108 Even if this sort isn't helpful, maybe sort with "sort -V", instead of using "-" replace with ".." would make the code more readable? 29-6.fc36 Version-Release number of selected component (if applicable): How reproducible: Steps to Reproduce: 1. 2. 3. Actual results: Expected results: Additional info: -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2024409

1 4

[Bug 1893631] New: Siig JJ-E01211-S1 MosChip MCS9900 parallel port card not recognized
by bugzilla＠redhat.com 13 Dec '22

13 Dec '22

https://bugzilla.redhat.com/show_bug.cgi?id=1893631 Bug ID: 1893631 Summary: Siig JJ-E01211-S1 MosChip MCS9900 parallel port card not recognized Product: Fedora Version: 33 Hardware: x86_64 OS: Linux Status: NEW Component: kmod Severity: high Assignee: kmod-maint(a)lists.fedoraproject.org Reporter: ToddAndMargo(a)zoho.com QA Contact: extras-qa(a)fedoraproject.org CC: jonathan(a)jonmasters.org, kmod-maint(a)lists.fedoraproject.org, skozina(a)redhat.com, ykaliuta(a)redhat.com Target Milestone: --- Classification: Fedora This is reproducible under both Fedora 32 and 33. Please fix on both. Siig JJ-E01211-S1 Single Parallel Port PCIe Card https://stage.siig.com/products/it-products/serial-parallel/parallel/pcie/s… System Requirements: ... Linux kernel 2.6 and later version Works with Linux but not supported Both Printer Admin (system-config-printer.py) and CUPS (https://127.0.0.1:631) do not find the card. Troubleshooting: 1) connected a USB to Parallel converter card. Printer work fine 2) boot off of Fedora-Xfce-Live-x86_64-33-1.2.iso. Printer admin still can't find the card. 3) With # modprobe -r lp # modprobe -r parport_pc # modprobe parport_pc io=0x378 irq=11 # modprobe lp the card does show up and you can print to it (lp0), but the jobs instantly disappear and nothing shows on the printer's status screen 4) tried a different parallel port cable with and without #3 above. No symptom change 5) tested with a uboobo live usb: xubuntu-20.10-desktop-amd64.iso with and without #3 above. No symptom change Here is some data on the card # udevadm info --attribute-walk /dev/lp0 Unknown device "/dev/lp0": No such device # lspci -nn | grep -i moschip 01:00.0 Parallel controller [0701]: MosChip Semiconductor Technology Ltd. MCS9900 Multi-I/O Controller [9710:9900] # lspci -vv -s 01:00.0 01:00.0 Parallel controller: MosChip Semiconductor Technology Ltd. MCS9900 Multi-I/O Controller (prog-if 03 [IEEE1284]) Subsystem: Device a000:2000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e010 [disabled] [size=8] Region 1: I/O ports at e000 [disabled] [size=8] Region 2: Memory at ac001000 (32-bit, non-prefetchable) [disabled] [size=4K] Region 5: Memory at ac000000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <2us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [800 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.

1 15

[Bug 2102796] New: kmod-30 is available
by bugzilla＠redhat.com 04 Jul '22

04 Jul '22

https://bugzilla.redhat.com/show_bug.cgi?id=2102796 Bug ID: 2102796 Summary: kmod-30 is available Product: Fedora Version: rawhide Status: NEW Component: kmod Keywords: FutureFeature, Triaged Assignee: kmod-maint(a)lists.fedoraproject.org Reporter: upstream-release-monitoring(a)fedoraproject.org QA Contact: extras-qa(a)fedoraproject.org CC: jonathan(a)jonmasters.org, kmod-maint(a)lists.fedoraproject.org, skozina(a)redhat.com, ykaliuta(a)redhat.com Target Milestone: --- Classification: Fedora Releases retrieved: 30 Upstream release that is considered latest: 30 Current version/release in rawhide: 29-7.fc36 URL: https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://fedoraproject.org/wiki/Upstream_release_monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1517/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/kmod -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2102796

1 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

kmod-maint July 2022