Re: [libteam]teamd_init() failed
by Flavio Leitner
On Thu, 31 May 2012 23:23:42 +0800
Wenhua Zhang <shiziwen(a)gmail.com> wrote:
> Hi Flavio,
> Thanks for your help.
> I have build the latest net-next kernel and try again.
> There is still some problem, and I will try some other method to fix it.
>
I did those steps yesterday using net-next and I am now running
active-backup on two different machines.
I had to clean the 'configure' caches from libnl and libteam as well
in order to get updated binaries.
fbl
>
>
> 2012/5/31 Flavio Leitner <fbl(a)redhat.com>:
> > On Thu, 31 May 2012 11:36:43 +0800
> > Wenhua Zhang <shiziwen(a)gmail.com> wrote:
> >
> >> Hi all,
> >> When I try to test the libteam as Example in
> >> https://fedorahosted.org/libteam/wiki/InfrastructureSpecification, I
> >> got errors as blew:
> >> Failed to create team device.
> >> teamd_init() failed.
> >> Failed to start daemon: Operation not supported
> >>
> >> The command is :teamd -f teamd2.conf -D
> >> The conf is :
> >> {
> >> "device": "team0",
> >> "runner": {
> >> "name": "lacp",
> >> "active": 1,
> >> "fast_rate": 1
> >> },
> >> "link_watch": {"name": "ethtool"},
> >> "ports": {"eth1": {}, "eth2": {}}
> >> }
> >>
> >> So, is there something wrong with my commands or conf file?
> >> Thanks for your help.
> >
> > You didn't tell what kernel you are using. You need to have
> > a kernel with libteam driver enabled.
> >
> > After booting with that kernel, compile libnl, install it.
> > Next compile libteam and install it.
> >
> > That fixed the same issue here.
> > fbl
> >
11 years, 10 months
[libteam]teamd_init() failed
by Wenhua Zhang
Hi all,
When I try to test the libteam as Example in
https://fedorahosted.org/libteam/wiki/InfrastructureSpecification, I
got errors as blew:
Failed to create team device.
teamd_init() failed.
Failed to start daemon: Operation not supported
The command is :teamd -f teamd2.conf -D
The conf is :
{
"device": "team0",
"runner": {
"name": "lacp",
"active": 1,
"fast_rate": 1
},
"link_watch": {"name": "ethtool"},
"ports": {"eth1": {}, "eth2": {}}
}
So, is there something wrong with my commands or conf file?
Thanks for your help.
11 years, 10 months
