12:27 p.m.
Is there a parameter I can pass in my kickstart file or do I just use some
sed trickery in my post configuration?
On Dec 6, 2010 9:47 AM, "Alan Pevec" <apevec(a)gmail.com> wrote:
12:45 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
Ah looks like it's an Xorg.conf parameter. I don't have X installed on
this machine. It's completely headless.
On Mon, Dec 6, 2010 at 10:27 AM, msacks <ntwrkd(a)gmail.com> wrote:
Is there a parameter I can pass in my kickstart file or do I just use
some
sed trickery in my post configuration?
On Dec 6, 2010 9:47 AM, "Alan Pevec" <apevec(a)gmail.com> wrote:
12:50 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
Is there a parameter I can pass in my kickstart file or do I just use
some
sed trickery in my post configuration?
Pass it to the kernel when you boot the install.
--
Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA (PST8PDT)
1:50 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
The blank screen also happens with nomodeset. This LiveCD image
doesn't have X installed on it, and it boots into runlevel 3 by
default. Any other ideas?
On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com> wrote:
On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
> Is there a parameter I can pass in my kickstart file or do I just use some
> sed trickery in my post configuration?
Pass it to the kernel when you boot the install.
--
Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA (PST8PDT)
--
livecd mailing list
livecd(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/livecd
1:53 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
Check the kernel boot messages specially the last ones, hopefully they will
help.
On Tue, Dec 7, 2010 at 12:50 AM, msacks <ntwrkd(a)gmail.com> wrote:
The blank screen also happens with nomodeset. This LiveCD image
doesn't have X installed on it, and it boots into runlevel 3 by
default. Any other ideas?
On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com> wrote:
> On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
>> Is there a parameter I can pass in my kickstart file or do I just use
some
>> sed trickery in my post configuration?
>
> Pass it to the kernel when you boot the install.
>
> --
> Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA
(PST8PDT)
>
> --
> livecd mailing list
> livecd(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/livecd
>
--
livecd mailing list
livecd(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/livecd
2 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
Not sure how I'd check that. Once it goes past the "loading" bar the
screen is completely blank. No way to get dmesg output.
On Mon, Dec 6, 2010 at 11:53 AM, mammar <mammar(a)gmail.com> wrote:
Check the kernel boot messages specially the last ones, hopefully
they will
help.
On Tue, Dec 7, 2010 at 12:50 AM, msacks <ntwrkd(a)gmail.com> wrote:
>
> The blank screen also happens with nomodeset. This LiveCD image
> doesn't have X installed on it, and it boots into runlevel 3 by
> default. Any other ideas?
>
> On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com> wrote:
> > On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
> >> Is there a parameter I can pass in my kickstart file or do I just use
> >> some
> >> sed trickery in my post configuration?
> >
> > Pass it to the kernel when you boot the install.
> >
> > --
> > Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA
> > (PST8PDT)
> >
> > --
> > livecd mailing list
> > livecd(a)lists.fedoraproject.org
> > https://admin.fedoraproject.org/mailman/listinfo/livecd
> >
> --
> livecd mailing list
> livecd(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/livecd
--
livecd mailing list
livecd(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/livecd
2:05 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
Remove quit from APPEND statement in your syslinux config file if there is
one, also remove rhgb.
On Tue, Dec 7, 2010 at 1:00 AM, msacks <ntwrkd(a)gmail.com> wrote:
Not sure how I'd check that. Once it goes past the
"loading" bar the
screen is completely blank. No way to get dmesg output.
On Mon, Dec 6, 2010 at 11:53 AM, mammar <mammar(a)gmail.com> wrote:
> Check the kernel boot messages specially the last ones, hopefully they
will
> help.
>
> On Tue, Dec 7, 2010 at 12:50 AM, msacks <ntwrkd(a)gmail.com> wrote:
>>
>> The blank screen also happens with nomodeset. This LiveCD image
>> doesn't have X installed on it, and it boots into runlevel 3 by
>> default. Any other ideas?
>>
>> On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com> wrote:
>> > On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
>> >> Is there a parameter I can pass in my kickstart file or do I just use
>> >> some
>> >> sed trickery in my post configuration?
>> >
>> > Pass it to the kernel when you boot the install.
>> >
>> > --
>> > Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA
>> > (PST8PDT)
>> >
>> > --
>> > livecd mailing list
>> > livecd(a)lists.fedoraproject.org
>> > https://admin.fedoraproject.org/mailman/listinfo/livecd
>> >
>> --
>> livecd mailing list
>> livecd(a)lists.fedoraproject.org
>> https://admin.fedoraproject.org/mailman/listinfo/livecd
>
>
> --
> livecd mailing list
> livecd(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/livecd
>
--
livecd mailing list
livecd(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/livecd
3:55 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
I removed quit and rhgb from my pxelinux config.
The /usr/lib/anaconda-runtime/boot/syslinux.cfg that exists in the
LiveCD itself doesn't have these options.
I'm at a loss here. Should I file a bug?
On Mon, Dec 6, 2010 at 12:05 PM, mammar <mammar(a)gmail.com> wrote:
Remove quit from APPEND statement in your syslinux config file if
there is
one, also remove rhgb.
On Tue, Dec 7, 2010 at 1:00 AM, msacks <ntwrkd(a)gmail.com> wrote:
>
> Not sure how I'd check that. Once it goes past the "loading" bar the
> screen is completely blank. No way to get dmesg output.
>
> On Mon, Dec 6, 2010 at 11:53 AM, mammar <mammar(a)gmail.com> wrote:
> > Check the kernel boot messages specially the last ones, hopefully they
> > will
> > help.
> >
> > On Tue, Dec 7, 2010 at 12:50 AM, msacks <ntwrkd(a)gmail.com> wrote:
> >>
> >> The blank screen also happens with nomodeset. This LiveCD image
> >> doesn't have X installed on it, and it boots into runlevel 3 by
> >> default. Any other ideas?
> >>
> >> On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com>
wrote:
> >> > On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
> >> >> Is there a parameter I can pass in my kickstart file or do I just
> >> >> use
> >> >> some
> >> >> sed trickery in my post configuration?
> >> >
> >> > Pass it to the kernel when you boot the install.
> >> >
> >> > --
> >> > Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard, WA
> >> > (PST8PDT)
> >> >
> >> > --
> >> > livecd mailing list
> >> > livecd(a)lists.fedoraproject.org
> >> > https://admin.fedoraproject.org/mailman/listinfo/livecd
> >> >
> >> --
> >> livecd mailing list
> >> livecd(a)lists.fedoraproject.org
> >> https://admin.fedoraproject.org/mailman/listinfo/livecd
> >
> >
> > --
> > livecd mailing list
> > livecd(a)lists.fedoraproject.org
> > https://admin.fedoraproject.org/mailman/listinfo/livecd
> >
> --
> livecd mailing list
> livecd(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/livecd
--
livecd mailing list
livecd(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/livecd
4:27 p.m.
New subject: liveCD doesn't boot on IBM X Series Hardware
More specifically, the screen goes blank at
Dracut: Switching root
Starting udevd:
On Mon, Dec 6, 2010 at 1:55 PM, msacks <ntwrkd(a)gmail.com> wrote:
I removed quit and rhgb from my pxelinux config.
The /usr/lib/anaconda-runtime/boot/syslinux.cfg that exists in the
LiveCD itself doesn't have these options.
I'm at a loss here. Should I file a bug?
On Mon, Dec 6, 2010 at 12:05 PM, mammar <mammar(a)gmail.com> wrote:
> Remove quit from APPEND statement in your syslinux config file if there is
> one, also remove rhgb.
>
> On Tue, Dec 7, 2010 at 1:00 AM, msacks <ntwrkd(a)gmail.com> wrote:
>>
>> Not sure how I'd check that. Once it goes past the "loading" bar
the
>> screen is completely blank. No way to get dmesg output.
>>
>> On Mon, Dec 6, 2010 at 11:53 AM, mammar <mammar(a)gmail.com> wrote:
>> > Check the kernel boot messages specially the last ones, hopefully they
>> > will
>> > help.
>> >
>> > On Tue, Dec 7, 2010 at 12:50 AM, msacks <ntwrkd(a)gmail.com> wrote:
>> >>
>> >> The blank screen also happens with nomodeset. This LiveCD image
>> >> doesn't have X installed on it, and it boots into runlevel 3 by
>> >> default. Any other ideas?
>> >>
>> >> On Mon, Dec 6, 2010 at 10:50 AM, Brian C. Lane <bcl(a)redhat.com>
wrote:
>> >> > On Mon, Dec 06, 2010 at 10:27:36AM -0800, msacks wrote:
>> >> >> Is there a parameter I can pass in my kickstart file or do I
just
>> >> >> use
>> >> >> some
>> >> >> sed trickery in my post configuration?
>> >> >
>> >> > Pass it to the kernel when you boot the install.
>> >> >
>> >> > --
>> >> > Brian C. Lane | Anaconda Team | IRC: bcl #anaconda | Port Orchard,
WA
>> >> > (PST8PDT)
>> >> >
>> >> > --
>> >> > livecd mailing list
>> >> > livecd(a)lists.fedoraproject.org
>> >> > https://admin.fedoraproject.org/mailman/listinfo/livecd
>> >> >
>> >> --
>> >> livecd mailing list
>> >> livecd(a)lists.fedoraproject.org
>> >> https://admin.fedoraproject.org/mailman/listinfo/livecd
>> >
>> >
>> > --
>> > livecd mailing list
>> > livecd(a)lists.fedoraproject.org
>> > https://admin.fedoraproject.org/mailman/listinfo/livecd
>> >
>> --
>> livecd mailing list
>> livecd(a)lists.fedoraproject.org
>> https://admin.fedoraproject.org/mailman/listinfo/livecd
>
>
> --
> livecd mailing list
> livecd(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/livecd
>
4896
days inactive
4896
days old
livecd@lists.fedoraproject.org
8 comments
3 participants
participants (3)
-
Brian C. Lane -
msacks -
Muhammad Ammar