Hello to everyone who is interested, How to replace the kernel on a Fedora livecd By Sean Godsell The reason I wrote this was I wanted to have a live cd with more stuff on it. I wanted more wifi, skype, and Adobe flash as well as shockwave, wine (for the games). So the first task on the list was a kernel that supported all the webcam drivers, ntfs, ndiswrapper, madwifi, and squashfs with lzma support. So I decided to go with the latest stable kernel at this time. Which is kernel 2.6.25.9 from kernel.org . I could have chosen the kernel source from fedora and built it the rpm way, but I started back in the days with slackware. So I am use to building the kernel the original way. Also this way of building works with other distros as well. And I get to control the patches that I want to apply. (I know you can edit the kernel.spec file, but I will leave that up to someone else ;-) ). I could also go into every detail of how to manipulate a kickstart file, and how to use livecd-creator, but I didn't, so stop reading then ;-). Once you have obtained the kernel source code, extracted, modified and built and tested it to your needs. Then its time to roll your own fedora livecd. To start with I obtained the original Fedora-9-i686-Live.iso file and saved it to /home/images (For the duration of this document I will be using a folder /home/images). Before we do anything else I am going to create a few mount points, using type in the following commands: mkdir /mnt/iso; mkdir /mnt/squashfs; mkdir /mnt/ext3fs; mkdir /mnt/next3fs Now we need to mount the Fedora-9-i686-Live.iso file. Type in the following command: mount -o loop /home/images/Fedora-9-i686-Live.iso /mnt/iso The next step I created a directory to put all the file into: mkdir /home/images/isoimage Next we have to copy all the files to the /home/images/isoimage directory with: cp -dpR /mnt/iso/* /home/images/isoimage So now we have extracted the fedora iso image to a directory. Next I created a directory called initrd mkdir /home/images/initrd Then I extracted the initrd0.img file using the following commands: cd /home/images/initrd cat /home/images/isoimage/isolinux/initrd0.img | gunzip - | cpio -i You should have an extracted initrd image now inside the /home/imgaes/initrd folder. Okay now comes the fun stuff. Copy the following lines to a file called copymodules in the /home/images folder. Start copying everything in between the equals symbols (======) ================== #!/bin/bash # Copy files from a modules.dep to a directory , by Sean Godsell # $1 - the modules.dep file to use # $2 - the directory of where to get the kernel modules to copy from # $3 - the directory to copy the modules into mods=`cat $1` for i in $mods; do name=`echo $i|awk '{print $1}'|awk -F / '{print $(NF)}'|awk -F : '{print $1}'` find $2 -iname $name -exec cp -dpf {} $3 \; done =================== Okay once the copymodules file is created. Next we have to create a directory for our new with the exact same name of the kernel you are going to copy from. In my case I am using 2.6.25.9. So I will create a directory in /home/images/initrd/lib/modules using the following command: mkdir /home/images/initrd/lib/modules/2.6.25.9 Next I want to use fedora livecds module files so I copied from the original /home/images/initrd/lib/modules/2.6.25-14.fc9.i686/ using the following command: cp /home/images/initrd/lib/modules/2.6.25-14.fc9.i686/module* /home/images/initrd/lib/modules/2.6.25.9/ Next I modified modules.dep and added the squashfs + lzma modules. To do this I looked at my installed 2.6.25.9 kernel from /lib/modules/2.6.25.9/modules.dep and replaced the one line with squashfs.ko: in /home/images/initrd/lib/modules/2.6.25.9/modules.dep with the following 3 lines: /lib/modules/2.6.25.9/extras/sqlzma.ko: /lib/modules/2.6.25.9/extras/unlzma.ko /lib/modules/2.6.25.9/extras/unlzma.ko: /lib/modules/2.6.25.9/extras/squashfs.ko: /lib/modules/2.6.25.9/extras/sqlzma.ko /lib/modules/2.6.25.9/extras/unlzma.ko I also edited out ALL of the /extras so you will end up with /lib/modules/2.6.25.9/unlzma.ko: . Next I did a global replace for 2.6.25-14.fc9.i686 to 2.6.25.9 . Now save the changes back to /home/images/initrd/lib/modules/2.6.25.9/modules.dep. We still don't have any modules in the folder, but that is about to change. Type in the following command: source /home/images/copymodules /home/images/initrd/lib/modules/2.6.25.9/modules.dep /lib/modules/2.6.25.9/ /home/images/initrd/lib/modules/2.6.25.9/ This should populate the /home/images/initrd/lib/modules/2.6.25.9 with all the necessary modules, including the squashfs and the lzma modules. Next we need to delete the old 2.6.25-14.fc9.i686 folder with the following command: rm -fr /home/images/initrd/lib/modules/2.6.25-14.fc9.i686 Once that is complete it is time to replace the original initrd0.img file. Type in the following commands: cd /home/images/initrd find . | cpio -H newc -o | gzip -9> /home/images/isoimage/isolinux/initrd0.img We now have replace the original initrd0.img. Next we need to replace the original kernel image with the following commnad: cp /boot/bzImage-2.6.25.9 /home/images/isoimage/isolinux/vmlinuz0 So now if we were to burn an iso image at this point it would boot up with the kernel 2.6.25.9 and mount a normal squashfs or a squashfs with lzma. But the rest of the livecd would not work. We need to replace the existing /lib/modules/2.6.25-14.fc9.i686 directory with the /lib/modules/2.6.25.9. These files reside inside the /home/images/isoimage/LiveOS/squashfs.img file. Enter in the following commands: mkdir /home/images/squashfs_image/ modprobe squashfs mount -o loop -t squashfs /home/images/isoimage/LiveOS/squashfs.img /mnt/squashfs cp -dpR /mnt/squashfs/* /home/images/squashfs_image/ umount /mnt/squashfs mount -o loop /home/images/squashfs_image/LiveOS/ext3fs.img /mnt/ext3fs rm -fr /mnt/ext3fs/lib/modules/2.6.25-14.fc9.i686 cp -dpR /lib/modules/2.6.25.9 /mnt/ext3fs/lib/modules/ Now you can put what ever you want on the ext3fs image. I put skype, wine packages and my wine enviroment with a windows version of firefox. Now some of you are probably thinking there is a firefox already on the fedora live cd. That is true. I already know this, but the only way that I know of getting shockwave to work is through wine or a VM with windows. The last option is just a little too big to get on a livecd image. So I opted to installing wine and my .wine environment. I also updated the firefox beta that was on the live image to the released version (Not to mention I updated a few more things). At this point you are ready to do 1 of 2 things. 1) you can re squash the ext3fs.img. 2) create a clean ext3fs.img and copy everything from /mnt/ext3fs/ to the clean ext3fs.img. You are probably wondering why would you copy everything from one ext3fs.img to another ext3fs.img, well the answer is quite simple. If you delete a bunch of things off the ext3fs.img, and then decide to squash it. You might get roughly the same size image after wards, even if you remove a lot of files. With ext3 file system it doesn't zero out all the files. It only removes entries, so the data is still there. So when squashing the ext3 image, if the data is still there, then it has to compress it. In other words if you transfer everything over from one image to a brand new clean image then when it comes time to compress the ext3 image, the end result can be a smaller image. If you don't care and want to just squash the ext3fs.img, then skip to the squashfs section. Okay to copy everything type in the following commands: dd if=/dev/zero of=/home/images/ext3fs.img bs=1MB count=4096 mkfs.ext3 /home/images/ext3fs.img mount -o loop /home/images/ext3fs.img /mnt/next3fs cp -dpR /mnt/ext3fs/* /mnt/next3fs/ Now to use the squashfs file system. First we most umount the ext3 file system. So type in: umount /mnt/next3fs umount /mnt/ext3fs Next replace the new image in squashfs_image/LiveOS cp -f /home/images/ext3fs.img /home/images/squashfs_image/LiveOS/ Then to compress type in (If you replaced the original command, then just remove the .lzma): mksquashfs.lzma squashfs_image/ /home/images/isoimage/LiveOS/squashfs.img This takes some time. So have a drink, hey why not have a couple of drinks ;-) Okay once that is done the final step is create an iso image with the following command: mkisofs -J -r -hide-rr-moved -hide-joliet-trans-tbl -V Fedora-9-Live-i686 -o Seans.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-info-table -boot-load-size 4 isoimage With the exact same fedora image. I was able to save almost 110 megabytes. Wow, what a savings. Not to mention saving on download time. I don't know why fedora didn't take the time to use squashfs+lzma, but it is worth it. I hope they put it in the next release. _________________________________________________________________ Express yourself with free Messenger emoticons. Get them today! http://www.freemessengeremoticons.ca/?icid=EMENCA122