4:17 p.m.
Hi Folks,
I've been following the threads on the list regarding the errors and loop
filesystems being left behind. I'm still running across
similar problems, and thought I'd through my data into the mix, in the hope
it may help point to the problem.
Configuration Particulars:
I'm running FC6 from the January 2007 re-spins, with patches as of this
morning (03/07).
I have a single local repository from the Januaury 2007 re-spin CDs.
With the version of livecd tools out of git with Jeremy's latest
livecd-fix-unmount-on-error.patch and
livecd-better-errors.patch applied.
Still see filesystems left behind.
I have attached the kickstart file I'm using, and the output from
livecd-creator.
Thanks folks for all your efforts on this.
John
5:11 p.m.
New subject: Patches on Error Case, Error Message Print Out
On Wed, 2007-03-07 at 14:17 -0800, john pleines wrote:
I've been following the threads on the list regarding the errors
and
loop filesystems being left behind. I'm still running across
similar problems, and thought I'd through my data into the mix, in the
hope it may help point to the problem.
Configuration Particulars:
I'm running FC6 from the January 2007 re-spins, with patches as of
this morning (03/07).
Which version of yum is this exactly?
I have attached the kickstart file I'm using, and the output
from
livecd-creator.
And this doesn't quite look like the kickstart file you're using -- it
still has references to non-existent paths :-)
I have a hunch of where this is going wrong, but will take setting up an
FC6 box to be more sure. I'll try to do so after I get back
Jeremy
6:01 p.m.
New subject: Patches on Error Case, Error Message Print Out
Hi Jeremy,
The output of rpm -q yum calls out a yum version of:
yum-3.0.3-1.fc6
Regarding the kickstart file, correct, brain fade occured here. I've
attached the correct
kickstart file. I have one other thought, although I was having problems
prior to updating pykickstart, which I believe is at 0.98 now, as
livecd-creator was looking for pykickstart.version which did exist in 0.36-1
.
Thanks,
John
On 3/7/07, Jeremy Katz <katzj(a)redhat.com> wrote:
On Wed, 2007-03-07 at 14:17 -0800, john pleines wrote:
> I've been following the threads on the list regarding the errors and
> loop filesystems being left behind. I'm still running across
> similar problems, and thought I'd through my data into the mix, in the
> hope it may help point to the problem.
>
> Configuration Particulars:
>
> I'm running FC6 from the January 2007 re-spins, with patches as of
> this morning (03/07).
Which version of yum is this exactly?
> I have attached the kickstart file I'm using, and the output from
> livecd-creator.
And this doesn't quite look like the kickstart file you're using -- it
still has references to non-existent paths :-)
I have a hunch of where this is going wrong, but will take setting up an
FC6 box to be more sure. I'll try to do so after I get back
Jeremy
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
8:15 p.m.
New subject: Patches on Error Case, Error Message Print Out
On Wed, 2007-03-07 at 16:01 -0800, john pleines wrote:
Regarding the kickstart file, correct, brain fade occured here.
I've
attached the correct
kickstart file. I have one other thought, although I was having
problems prior to updating pykickstart, which I believe is at 0.98
now, as livecd-creator was looking for pykickstart.version which did
exist in 0.36-1.
Yeah -- I don't know that there's a good way to work with the older
version of pykickstart in FC6 easily. I'll have to talk with clumens
about that.
You can probably workaround the problem by naming the repo something
other than "core" in the ks.cfg. But filing something so that we can
handle the error better is definitely a good idea. It might just make
sense to ensure the repos are named uniquely livecd-something-id since
they're not going to be preserved.
Jeremy
5:06 a.m.
New subject: Patches on Error Case, Error Message Print Out
Hi,
I'm also having the same problem with Fedora 7. It complains about
duplicated repo and leaves mounted loop device.
While debugging the problem I noticed some possible bugs. So I attach a
patch trying to fix the problem.
Cheers,
Alex
Jeremy Katz escribió:
On Wed, 2007-03-07 at 16:01 -0800, john pleines wrote:
> Regarding the kickstart file, correct, brain fade occured here. I've
> attached the correct
> kickstart file. I have one other thought, although I was having
> problems prior to updating pykickstart, which I believe is at 0.98
> now, as livecd-creator was looking for pykickstart.version which did
> exist in 0.36-1.
>
Yeah -- I don't know that there's a good way to work with the older
version of pykickstart in FC6 easily. I'll have to talk with clumens
about that.
You can probably workaround the problem by naming the repo something
other than "core" in the ks.cfg. But filing something so that we can
handle the error better is definitely a good idea. It might just make
sense to ensure the repos are named uniquely livecd-something-id since
they're not going to be preserved.
Jeremy
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
2:07 p.m.
New subject: Patches on Error Case, Error Message Print Out
On Thu, 2007-03-08 at 12:06 +0100, Alexandre Magaz Graça wrote:
I'm also having the same problem with Fedora 7. It complains
about
duplicated repo and leaves mounted loop device.
Can you get a better trace of where it's complaining?
While debugging the problem I noticed some possible bugs. So I
attach
a patch trying to fix the problem.
[snip]
@@ -432,6 +436,11 @@ class InstallationTarget:
def teardown(self):
"""releases all resources and removes all temporary
files"""
+ self.bindmounts.reverse()
+
+ for bindmount in self.bindmounts:
+ bindmount.umount()
+
# ensure we've detached the install_root
self.unmount()
This doesn't quite seem right as we should be getting the bind mounts
unmounted when going to do the unmount() -- if you're not seeing that,
then the question is why not
Jeremy
8 a.m.
New subject: Patches on Error Case, Error Message Print Out
Jeremy Katz escribió:
On Thu, 2007-03-08 at 12:06 +0100, Alexandre Magaz Graça wrote:
> I'm also having the same problem with Fedora 7. It complains about
> duplicated repo and leaves mounted loop device.
Can you get a better trace of where it's complaining?
Yes, here is the trace
Traceback (most recent call last):
File "/usr/bin/livecd-creator", line 842, in main
target.addRepository(n, u)
File "/usr/bin/livecd-creator", line 457, in addRepository
self.ayum.addRepository(name, url)
File "/usr/bin/livecd-creator", line 240, in addRepository
self.repos.add(repo)
File "/usr/lib/python2.5/site-packages/yum/repos.py", line 44, in add
raise Errors.DuplicateRepoError, 'Repository %s is listed more than
once in the configuration' % (repoobj.id)
DuplicateRepoError: Repository extras is listed more than once in the
configuration
Although I've tried with the last git version and now it doesn't
complains anymore.
> While debugging the problem I noticed some possible bugs. So I
attach
> a patch trying to fix the problem.
[snip]
> @@ -432,6 +436,11 @@ class InstallationTarget:
> def teardown(self):
> """releases all resources and removes all temporary
files"""
>
> + self.bindmounts.reverse()
> +
> + for bindmount in self.bindmounts:
> + bindmount.umount()
> +
> # ensure we've detached the install_root
> self.unmount()
This doesn't quite seem right as we should be getting the bind mounts
unmounted when going to do the unmount() -- if you're not seeing that,
then the question is why not
Oops!! you are right, I didn't see it
Jeremy
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
6244
days inactive
6264
days old
livecd@lists.fedoraproject.org
6 comments
3 participants
participants (3)
-
Alexandre Magaz Graça -
Jeremy Katz -
john pleines