3:26 p.m.
I am creating liveCD with livecd-creator tool and using Livecd-fedora-9-base-desktop.ks as
the kickstart file. I needed to a user so I added the following command to the add user
section of the kickstart file
useradd -c "full name of user" username
I created the LiveCD and booted it. The user was listed on the login screen. However, I
was not able to login using it. The following message was displayed "unable to
authenticate user". Since I did not set a password I was expecting that it would
login but it did not.
Additionally, I attempted to login using the default Fedora Live Login. It did not work
but there was no message displayed. It
Any ideas on what is causing this problem?
[cid:image001.gif@01C94409.7C6C5A40]
[cid:image002.gif@01C94409.7C6C5A40]
Monroe Taylor III
Test engineering
Intel Corporation
Americas Post Sales Support
(480) 552-3041 Fax (480) 552-7565
monroe.e.taylor@intel.com<mailto:monroe.e.taylor@intel.com>
3:38 p.m.
have you reset that users password
useradd -c "full name of user" username
passwd -d username > /dev/null
3:49 p.m.
No I did not. The reason since the default user login (fedora) does not work either.
So I thought I see if new user worked without resetting password. Below is the section
from the kickstart file I
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
-----Original Message-----
From: fedora-livecd-list-bounces(a)redhat.com [mailto:fedora-livecd-list-bounces@redhat.com]
On Behalf Of ???? ??????
Sent: Tuesday, November 11, 2008 2:38 PM
To: fedora-livecd-list(a)redhat.com
Subject: Re: [Fedora-livecd-list] Adding users to LiveCD
have you reset that users password
useradd -c "full name of user" username
passwd -d username > /dev/null
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
4:31 p.m.
try to blame SELinux
On Tue, 11 Nov 2008 14:49:49 -0700, "Taylor, Monroe E"
<monroe.e.taylor(a)intel.com> wrote:
No I did not. The reason since the default user login (fedora) does
not
work either.
So I thought I see if new user worked without resetting password. Below
is
the section from the kickstart file I
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
-----Original Message-----
From: fedora-livecd-list-bounces(a)redhat.com
[mailto:fedora-livecd-list-bounces@redhat.com] On Behalf Of ???? ??????
Sent: Tuesday, November 11, 2008 2:38 PM
To: fedora-livecd-list(a)redhat.com
Subject: Re: [Fedora-livecd-list] Adding users to LiveCD
have you reset that users password
useradd -c "full name of user" username
passwd -d username > /dev/null
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
4:50 p.m.
On Tue, 2008-11-11 at 14:49 -0700, Taylor, Monroe E wrote:
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
IIRC useradd doesn't use libuser, and cannot set selinux attributes
correctly. Try luseradd instead?
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
2:50 p.m.
I used the luseradd command instead of the useradd command as follows;
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
luseradd -c "ipdt" ipdt
#usermod -p 'ipdt' ipdt
luseradd -c "Monroe Taylor" metaylor
#usermod -p 'rocket23' metaylor
After burning and booting the CD I confirmed that accounts for each of the 3 users (Fedora
Live, ipdt, and Monroe Taylor) were present on the login screen. However, none of them
worked, not even the default (Fedora Live).
For the two accounts I wanted to add, the error message was unable to authenticate user I
even selected other and tried to use root but got the same result. When I tried the
default, the screen changed as if it was logging in, but it returned to the login screen
without any error reporting.
Are there any other ideas? It seems to me that at least the default should work.
Sorry for the late reply
-----Original Message-----
From: fedora-livecd-list-bounces(a)redhat.com [mailto:fedora-livecd-list-bounces@redhat.com]
On Behalf Of Jesse Keating
Sent: Tuesday, November 11, 2008 3:50 PM
To: fedora-livecd-list(a)redhat.com
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
On Tue, 2008-11-11 at 14:49 -0700, Taylor, Monroe E wrote:
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
IIRC useradd doesn't use libuser, and cannot set selinux attributes
correctly. Try luseradd instead?
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
2:55 p.m.
I had the same problem.
I tried it under Fedora 8 and it worked.
I have tried Fedora 10 Beta and can't get the CD to roll and I changed to try to roll
a Live CentOS or Redhat CD.
________________________________
From: "Taylor, Monroe E" <monroe.e.taylor(a)intel.com>
To: "fedora-livecd-list(a)redhat.com" <fedora-livecd-list(a)redhat.com>
Sent: Monday, November 17, 2008 3:50:01 PM
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
I used the luseradd command instead of the useradd command as follows;
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
luseradd -c "ipdt" ipdt
#usermod -p 'ipdt' ipdt
luseradd -c "Monroe Taylor" metaylor
#usermod -p 'rocket23' metaylor
After burning and booting the CD I confirmed that accounts for each of the 3 users (Fedora
Live, ipdt, and Monroe Taylor) were present on the login screen. However, none of them
worked, not even the default (Fedora Live).
For the two accounts I wanted to add, the error message was unable to authenticate user I
even selected other and tried to use root but got the same result. When I tried the
default, the screen changed as if it was logging in, but it returned to the login screen
without any error reporting.
Are there any other ideas? It seems to me that at least the default should work.
Sorry for the late reply
-----Original Message-----
From: fedora-livecd-list-bounces(a)redhat.com [mailto:fedora-livecd-list-bounces@redhat.com]
On Behalf Of Jesse Keating
Sent: Tuesday, November 11, 2008 3:50 PM
To: fedora-livecd-list(a)redhat.com
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
On Tue, 2008-11-11 at 14:49 -0700, Taylor, Monroe E wrote:
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
IIRC useradd doesn't use libuser, and cannot set selinux attributes
correctly. Try luseradd instead?
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
2:59 p.m.
Please clarify if Fedora 8 worked by changing to luseradd or if it worked using useradd.
________________________________
From: fedora-livecd-list-bounces(a)redhat.com [mailto:fedora-livecd-list-bounces@redhat.com]
On Behalf Of Todd Cooper
Sent: Monday, November 17, 2008 1:55 PM
To: fedora-livecd-list(a)redhat.com
Subject: Re: [Fedora-livecd-list] Adding users to LiveCD
I had the same problem.
I tried it under Fedora 8 and it worked.
I have tried Fedora 10 Beta and can't get the CD to roll and I changed to try to roll
a Live CentOS or Redhat CD.
________________________________
From: "Taylor, Monroe E" <monroe.e.taylor(a)intel.com>
To: "fedora-livecd-list(a)redhat.com" <fedora-livecd-list(a)redhat.com>
Sent: Monday, November 17, 2008 3:50:01 PM
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
I used the luseradd command instead of the useradd command as follows;
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
luseradd -c "ipdt" ipdt
#usermod -p 'ipdt' ipdt
luseradd -c "Monroe Taylor" metaylor
#usermod -p 'rocket23' metaylor
After burning and booting the CD I confirmed that accounts for each of the 3 users (Fedora
Live, ipdt, and Monroe Taylor) were present on the login screen. However, none of them
worked, not even the default (Fedora Live).
For the two accounts I wanted to add, the error message was unable to authenticate user I
even selected other and tried to use root but got the same result. When I tried the
default, the screen changed as if it was logging in, but it returned to the login screen
without any error reporting.
Are there any other ideas? It seems to me that at least the default should work.
Sorry for the late reply
-----Original Message-----
From:
fedora-livecd-list-bounces@redhat.com<mailto:fedora-livecd-list-bounces@redhat.com>
[mailto:fedora-livecd-list-bounces@redhat.com<mailto:fedora-livecd-list-bounces@redhat.com>]
On Behalf Of Jesse Keating
Sent: Tuesday, November 11, 2008 3:50 PM
To: fedora-livecd-list@redhat.com<mailto:fedora-livecd-list@redhat.com>
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
On Tue, 2008-11-11 at 14:49 -0700, Taylor, Monroe E wrote:
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c "monroe taylor" metaylor
IIRC useradd doesn't use libuser, and cannot set selinux attributes
correctly. Try luseradd instead?
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
--
Fedora-livecd-list mailing list
Fedora-livecd-list@redhat.com<mailto:Fedora-livecd-list@redhat.com>
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
3:27 p.m.
Fedora 8 worked with just useradd.
________________________________
From: "Taylor, Monroe E" <monroe.e.taylor(a)intel.com>
To: Todd Cooper <todd(a)world.std.com>; "fedora-livecd-list(a)redhat.com"
<fedora-livecd-list(a)redhat.com>
Sent: Tuesday, November 18, 2008 3:59:37 PM
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
Please clarify if Fedora 8 worked by
changing to luseradd or if it worked using useradd.
________________________________
From:fedora-livecd-list-bounces@redhat.com
[mailto:fedora-livecd-list-bounces@redhat.com] On Behalf Of Todd Cooper
Sent: Monday, November 17, 2008
1:55 PM
To: fedora-livecd-list(a)redhat.com
Subject: Re: [Fedora-livecd-list]
Adding users to LiveCD
I had the same problem.
I tried it under Fedora 8 and it worked.
I have tried Fedora 10 Beta and can't get the CD to roll and I changed to try
to roll a Live CentOS or Redhat CD.
________________________________
From:"Taylor,
Monroe E" <monroe.e.taylor(a)intel.com>
To: " fedora-livecd-list(a)redhat.com "
< fedora-livecd-list(a)redhat.com >
Sent: Monday, November 17, 2008
3:50:01 PM
Subject: RE: [Fedora-livecd-list]
Adding users to LiveCD
I used the luseradd command instead of the useradd command as follows;
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
luseradd -c "ipdt" ipdt
#usermod -p 'ipdt' ipdt
luseradd -c "Monroe Taylor" metaylor
#usermod -p 'rocket23' metaylor
After burning and booting the CD I confirmed that accounts for each of the 3
users (Fedora Live, ipdt, and Monroe Taylor) were present on the login screen.
However, none of them worked, not even the default (Fedora Live).
For the two accounts I wanted to add, the error message was unable to
authenticate user I even selected other and tried to use root but got the same
result. When I tried the default, the screen changed as if it was logging in,
but it returned to the login screen without any error reporting.
Are there any other ideas? It seems to me that at least the default should
work.
Sorry for the late reply
-----Original Message-----
From: fedora-livecd-list-bounces(a)redhat.com
[mailto:fedora-livecd-list-bounces@redhat.com]
On Behalf Of Jesse Keating
Sent: Tuesday, November 11, 2008 3:50 PM
To: fedora-livecd-list(a)redhat.com
Subject: RE: [Fedora-livecd-list] Adding users to LiveCD
On Tue, 2008-11-11 at 14:49 -0700, Taylor ,
Monroe E wrote:
# add fedora user with no passwd
useradd -c "Fedora Live" fedora
passwd -d fedora > /dev/null
useradd -c "ipdg" ipdt
useradd -c " monroe taylor " metaylor
IIRC useradd doesn't use libuser, and cannot set selinux attributes
correctly. Try luseradd instead?
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
--
Fedora-livecd-list mailing list
Fedora-livecd-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-livecd-list
5645
days inactive
5652
days old
livecd@lists.fedoraproject.org
8 comments
4 participants
participants (4)
-
Jesse Keating -
muayyad.alsadi＠ojuba.org -
Taylor, Monroe E -
Todd Cooper