7:16 a.m.
Greetings,
I do finally have a working Fedora image for the Creator CI20 [1]. It
boots into headless - you can either use serial console or SSH to
connect - and has a working DNF to install packages. Mock should also be
fully functional.
I have started stage4 rebuilding a few days ago and will keep the repos
[2] up to date. Issues are listed on the wiki [3], any help on any of
them would be appreciated (top priority now being kernel packaging and
java bootstrap).
There is also a short blog post by IMG [4] promoting Fedora on Creator CI20.
Give it a try, any feedback is welcome.
Regards,
Michal
[1] http://mipsfedora.imgtec.com/development/22/mipsel/images/20150630/ci20/
[2] http://mipsfedora.imgtec.com/development/22/mipsel/
[3]
https://fedoraproject.org/wiki/Architectures/MIPS/2015Bootstrap/mipsel/is...
[4] http://blog.imgtec.com/mips-processors/fedora-is-coming-to-creator-ci20
3:56 p.m.
On Tue, Jun 30, 2015 at 02:16:18PM +0200, Michal Toman wrote:
I do finally have a working Fedora image for the Creator CI20 [1].
It
boots into headless - you can either use serial console or SSH to
connect - and has a working DNF to install packages. Mock should also be
fully functional.
I have started stage4 rebuilding a few days ago and will keep the repos
[2] up to date. Issues are listed on the wiki [3], any help on any of
them would be appreciated (top priority now being kernel packaging and
java bootstrap).
There is also a short blog post by IMG [4] promoting Fedora on Creator CI20.
Give it a try, any feedback is welcome.
Thanks Michal,
so far no issues whatsoever (I did find out after asking in #ci20 that
this image cannot be flashed to the NAND, as to do that special care
needs to be taken in the image creation).
I took a look at the open issues. I have worked around M2Crypto failing
and put the rpms here:
http://acksyn.org/files/rpms/f22-mipsel/
I'll be trying to build some more packages as time permits. I will
upload them on the above URL for the time being.
Cheers,
Michele
--
Michele Baldessari <michele(a)acksyn.org>
C2A5 9DA3 9961 4FFB E01B D0BC DDD4 DCCB 7515 5C6D
5:22 a.m.
Hi Michal,
Sorry for the delayed response in posting. To introduce myself I'm the
Fedora rel-end secondary arch lead, I've been involved in the ARM*
(armv5, armv7 and aarch64) projects as well as ppc64le bringup so I
know a little about the process.
On Tue, Jun 30, 2015 at 02:16:18PM +0200, Michal Toman wrote:
I do finally have a working Fedora image for the Creator CI20 [1]. It
boots into headless - you can either use serial console or SSH to
connect - and has a working DNF to install packages. Mock should also be
fully functional.
I have started stage4 rebuilding a few days ago and will keep the repos
[2] up to date. Issues are listed on the wiki [3], any help on any of
them would be appreciated (top priority now being kernel packaging and
java bootstrap).
Let me know if you need help with the kernel side of things. I'm the
maintainer for the ARM, and co-maintainer for most of the kernel
secondary arches. Also u-boot which I suspect you'll need too for
booting.
For u-boot bootloader side of things it would be useful to support the
distro defaults support as it would allow minimal adjustments for
support in grubby/anaconda and friends as it would allow the reuse of
the same code as used on ARM making maintenance much easier for all
involved.
Peter
5:58 a.m.
Hi Peter,
thanks for your support. Help on the kernel and u-boot side would be
very appreciated. Reusing the code is the way to go and I believe we can
use the distro defaults for MIPS with a reasonable effort. So far
nothing at all has been done on either kernel or u-boot and it is about
time to start with that.
I was actually planning to catch you at Flock and discuss some more
details, so if you'll find a minute for me that would be great. This can
also be a call for others - if you want to discuss MIPS at Flock, I'll
be there, just let me know.
Regards,
Michal
On 24.07.2015 o 12:22 Peter Robinson wrote:
Hi Michal,
Sorry for the delayed response in posting. To introduce myself I'm the
Fedora rel-end secondary arch lead, I've been involved in the ARM*
(armv5, armv7 and aarch64) projects as well as ppc64le bringup so I
know a little about the process.
> On Tue, Jun 30, 2015 at 02:16:18PM +0200, Michal Toman wrote:
> I do finally have a working Fedora image for the Creator CI20 [1]. It
> boots into headless - you can either use serial console or SSH to
> connect - and has a working DNF to install packages. Mock should also be
> fully functional.
>
> I have started stage4 rebuilding a few days ago and will keep the repos
> [2] up to date. Issues are listed on the wiki [3], any help on any of
> them would be appreciated (top priority now being kernel packaging and
> java bootstrap).
Let me know if you need help with the kernel side of things. I'm the
maintainer for the ARM, and co-maintainer for most of the kernel
secondary arches. Also u-boot which I suspect you'll need too for
booting.
For u-boot bootloader side of things it would be useful to support the
distro defaults support as it would allow minimal adjustments for
support in grubby/anaconda and friends as it would allow the reuse of
the same code as used on ARM making maintenance much easier for all
involved.
Peter
_______________________________________________
mips mailing list
mips(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/mips
6:25 a.m.
Hi Michal,
thanks for your support. Help on the kernel and u-boot side would be
very appreciated. Reusing the code is the way to go and I believe we can
use the distro defaults for MIPS with a reasonable effort. So far
nothing at all has been done on either kernel or u-boot and it is about
time to start with that.
Happy to help where possible. Upstream first is obviously best for
both kernel and u-boot.
I was actually planning to catch you at Flock and discuss some more
details, so if you'll find a minute for me that would be great. This can
also be a call for others - if you want to discuss MIPS at Flock, I'll
be there, just let me know.
At flock you can have at least two mins ;-) I think flock would be a
good time, I'm not sure I'll have much time prior to that TBH but I'm
always around on IRC/email so if there's any queries prior to Flock
don't hesitate to ping.
Peter
On 24.07.2015 o 12:22 Peter Robinson wrote:
> Hi Michal,
>
> Sorry for the delayed response in posting. To introduce myself I'm the
> Fedora rel-end secondary arch lead, I've been involved in the ARM*
> (armv5, armv7 and aarch64) projects as well as ppc64le bringup so I
> know a little about the process.
>
>> On Tue, Jun 30, 2015 at 02:16:18PM +0200, Michal Toman wrote:
>> I do finally have a working Fedora image for the Creator CI20 [1]. It
>> boots into headless - you can either use serial console or SSH to
>> connect - and has a working DNF to install packages. Mock should also be
>> fully functional.
>>
>> I have started stage4 rebuilding a few days ago and will keep the repos
>> [2] up to date. Issues are listed on the wiki [3], any help on any of
>> them would be appreciated (top priority now being kernel packaging and
>> java bootstrap).
>
> Let me know if you need help with the kernel side of things. I'm the
> maintainer for the ARM, and co-maintainer for most of the kernel
> secondary arches. Also u-boot which I suspect you'll need too for
> booting.
>
> For u-boot bootloader side of things it would be useful to support the
> distro defaults support as it would allow minimal adjustments for
> support in grubby/anaconda and friends as it would allow the reuse of
> the same code as used on ARM making maintenance much easier for all
> involved.
>
> Peter
> _______________________________________________
> mips mailing list
> mips(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/mips
>
_______________________________________________
mips mailing list
mips(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/mips
9:11 a.m.
On Fri, Jul 24, 2015 at 6:22 PM, Peter Robinson <pbrobinson(a)gmail.com> wrote:
Let me know if you need help with the kernel side of things. I'm
the
maintainer for the ARM, and co-maintainer for most of the kernel
secondary arches. Also u-boot which I suspect you'll need too for
booting.
For u-boot bootloader side of things it would be useful to support the
distro defaults support as it would allow minimal adjustments for
support in grubby/anaconda and friends as it would allow the reuse of
the same code as used on ARM making maintenance much easier for all
involved.
Is there any possible hardware plan for MIPS on Fedora? From Koji, to
recommended boards?
Thanks.
7:44 a.m.
On Fri, 2015-07-24 22:11:26 +0800, Christopher Meng wrote:
On Fri, Jul 24, 2015 at 6:22 PM, Peter Robinson
<pbrobinson(a)gmail.com> wrote:
> Let me know if you need help with the kernel side of things. I'm the
> maintainer for the ARM, and co-maintainer for most of the kernel
> secondary arches. Also u-boot which I suspect you'll need too for
> booting.
>
> For u-boot bootloader side of things it would be useful to support
> the distro defaults support as it would allow minimal adjustments for
> support in grubby/anaconda and friends as it would allow the reuse of
> the same code as used on ARM making maintenance much easier for all
> involved.
Is there any possible hardware plan for MIPS on Fedora? From Koji, to
recommended boards?
There is hardware already available but with not enough RAM and no SATA
connector for build servers. We'll soon be evaluating machines with at
least 4 cpu cores, 8 GB RAM and a SATA connector as build servers.
6:45 p.m.
On Tue, Jul 28, 2015 at 8:44 PM, Anibal Monsalve Salazar
<Anibal.MonsalveSalazar(a)imgtec.com> wrote:
There is hardware already available but with not enough RAM and no
SATA
connector for build servers. We'll soon be evaluating machines with at
least 4 cpu cores, 8 GB RAM and a SATA connector as build servers.
I'm just waiting for the new CI20(just preordered it) to be released
soon, August is coming ;)
Thanks for the info.
--
Yours sincerely,
Christopher Meng
http://cicku.me
9:04 p.m.
I'd like to test the image on Loongson once the kernel is replaced with
Fedora one as we still have Loongson users in China.
Zamir
On 07/24/2015 06:22 PM, Peter Robinson wrote:
Hi Michal,
Sorry for the delayed response in posting. To introduce myself I'm the
Fedora rel-end secondary arch lead, I've been involved in the ARM*
(armv5, armv7 and aarch64) projects as well as ppc64le bringup so I
know a little about the process.
> On Tue, Jun 30, 2015 at 02:16:18PM +0200, Michal Toman wrote:
> I do finally have a working Fedora image for the Creator CI20 [1]. It
> boots into headless - you can either use serial console or SSH to
> connect - and has a working DNF to install packages. Mock should also be
> fully functional.
>
> I have started stage4 rebuilding a few days ago and will keep the repos
> [2] up to date. Issues are listed on the wiki [3], any help on any of
> them would be appreciated (top priority now being kernel packaging and
> java bootstrap).
Let me know if you need help with the kernel side of things. I'm the
maintainer for the ARM, and co-maintainer for most of the kernel
secondary arches. Also u-boot which I suspect you'll need too for
booting.
For u-boot bootloader side of things it would be useful to support the
distro defaults support as it would allow minimal adjustments for
support in grubby/anaconda and friends as it would allow the reuse of
the same code as used on ARM making maintenance much easier for all
involved.
Peter
_______________________________________________
mips mailing list
mips(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/mips
--
Zamir SUN
zsun(a)fedoraproject.org
zsun in #fedora-zh #openshift on freenode.net
3201
days inactive
3229
days old
8 comments
7 participants
participants (7)
-
Anibal Monsalve Salazar -
Christopher Meng -
Christopher Meng -
Michal Toman -
Michele Baldessari -
Peter Robinson -
Zamir Sun