8:32 p.m.
----- "David Lutterkort" <lutter(a)redhat.com> wrote:
On Tue, 2009-12-01 at 13:49 -0800, Dale Bewley wrote:
> Out of the box F12 64bit fairly slim install with 497 packages,
> NetworkManager is not running. It's been chkconfig'd off in the
> kickstart %post.
>
> There is an eth0 and an eth1 interface. Eth1 is inactive and eth0
is
> configured by anaconda to use dhcp. Netcf 0.1.4 fails run:
This seems like another manifestation of the bug you found with not
having the bridge module loaded - the fix for that is only in
netcf-0.1.5, not in 0.1.4. Can you retry with 0.1.5 ? (It's in
updates-testing)
Almost, but it's different because the bridge module actually is present.
I neglected to mention that.
I just tested again on a fresh F12 install:
[root@localhost ~]# lsmod |grep bridge
bridge 54112 0
stp 2724 1 bridge
llc 6400 2 bridge,stp
[root@localhost ~]# ncftool
Failed to initialize netcf
error: unspecified error
error: errors in loading some config files
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:22:19:65:F4:E2
inet addr:10.1.200.134 Bcast:10.1.200.255 Mask:255.255.255.0
inet6 addr: fe80::222:19ff:fe65:f4e2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:259 errors:0 dropped:0 overruns:0 frame:0
TX packets:153 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29218 (28.5 KiB) TX bytes:20886 (20.3 KiB)
Interrupt:37 Memory:ec000000-ec012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0 Link encap:Ethernet HWaddr F2:B5:3A:82:90:D9
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
# upgrading to netcf 0.1.5 did not help
[root@localhost ~]# yum --enablerepo=updates-testing update netcf
...
Updated:
netcf.x86_64 0:0.1.5-1.fc12
Dependency Updated:
netcf-libs.x86_64 0:0.1.5-1.fc12
...
[root@localhost ~]# ncftool
Failed to initialize netcf
error: unspecified error
error: errors in loading some config files
[root@localhost ~]# virsh iface-list
error: Failed to list active interfaces
error: this function is not supported by the hypervisor: virConnectNumOfInterfaces
# creating my own bridge does make it work
[root@localhost ~]# cd /etc/sysconfig/network-scripts
[root@localhost network-scripts]# ls ifcfg*
ifcfg-eth0 ifcfg-eth1 ifcfg-lo
[root@localhost network-scripts]# cat <<EOF > ifcfg-eth0
DEVICE=eth0
HWADDR=
ONBOOT=yes
BRIDGE=br0
EOF
[root@localhost network-scripts]# cat <<EOF > ifcfg-br0
DEVICE=br0
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=dhcp
EOF
[root@localhost network-scripts]# service network restart
Shutting down interface br0: [ OK ]
Shutting down interface eth0: bridge br0 does not exist!
[ OK ]
Shutting down loopback interface: [ OK ]
Disabling IPv4 packet forwarding: net.ipv4.ip_forward = 0
[ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Bringing up interface br0:
Determining IP information for br0... done.
[ OK ]
[root@localhost network-scripts]# ncftool
ncftool> list
br0
lo
ncftool> quit
[root@localhost network-scripts]# virsh iface-list --all
Name State MAC Address
--------------------------------------------
br0 active 00:22:19:65:f4:e2
lo active 00:00:00:00:00:00
eth1 inactive 00:22:19:65:f4:e4
[root@localhost network-scripts]# ifconfig
br0 Link encap:Ethernet HWaddr 00:22:19:65:F4:E2
inet addr:10.1.200.134 Bcast:10.1.200.255 Mask:255.255.255.0
inet6 addr: fe80::222:19ff:fe65:f4e2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1157 errors:0 dropped:0 overruns:0 frame:0
TX packets:536 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:93393 (91.2 KiB) TX bytes:118448 (115.6 KiB)
eth0 Link encap:Ethernet HWaddr 00:22:19:65:F4:E2
inet6 addr: fe80::222:19ff:fe65:f4e2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1147 errors:0 dropped:0 overruns:0 frame:0
TX packets:525 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:113163 (110.5 KiB) TX bytes:118536 (115.7 KiB)
Interrupt:37 Memory:ec000000-ec012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0 Link encap:Ethernet HWaddr F2:B5:3A:82:90:D9
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
--
Dale Bewley - Unix Administrator - Shields Library - UC Davis
GPG: 0xB098A0F3 0D5A 9AEB 43F4 F84C 7EFD 1753 064D 2583 B098 A0F3
1:10 p.m.
New subject: ncftool 'Failed to initialize netcf' missing a dep?
On Wed, 2009-12-02 at 18:32 -0800, Dale Bewley wrote:
----- "David Lutterkort" <lutter(a)redhat.com> wrote:
> On Tue, 2009-12-01 at 13:49 -0800, Dale Bewley wrote:
> > Out of the box F12 64bit fairly slim install with 497 packages,
> > NetworkManager is not running. It's been chkconfig'd off in the
> > kickstart %post.
> >
> > There is an eth0 and an eth1 interface. Eth1 is inactive and eth0
> is
> > configured by anaconda to use dhcp. Netcf 0.1.4 fails run:
>
> This seems like another manifestation of the bug you found with not
> having the bridge module loaded - the fix for that is only in
> netcf-0.1.5, not in 0.1.4. Can you retry with 0.1.5 ? (It's in
> updates-testing)
Almost, but it's different because the bridge module actually is present.
I neglected to mention that.
I just tested again on a fresh F12 install:
[root@localhost ~]# lsmod |grep bridge
bridge 54112 0
stp 2724 1 bridge
llc 6400 2 bridge,stp
[root@localhost ~]# ncftool
Failed to initialize netcf
error: unspecified error
error: errors in loading some config files
Can you try this again with 'NETCF_DEBUG=1 ncftool', i.e. set
NETCF_DEBUG in the environment ? That should spew out some more details.
David
5259
days inactive
5260
days old
netcf-devel@lists.fedorahosted.org
1 comments
2 participants
participants (2)
-
Dale Bewley -
David Lutterkort